From: Florian Fainelli Date: Wed, 23 Jan 2019 22:54:36 +0000 (-0800) Subject: reset: Add Broadcom STB SW_INIT reset controller driver X-Git-Tag: v5.4-rc1~1521^2~21^2~3 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=77750bc089e4508ff62f036e6e6626cf8d7384cb;p=platform%2Fkernel%2Flinux-rpi.git reset: Add Broadcom STB SW_INIT reset controller driver Add support for resetting blocks through the Linux reset controller subsystem when reset lines are provided through a SW_INIT-style reset controller on Broadcom STB SoCs. Signed-off-by: Florian Fainelli Signed-off-by: Philipp Zabel --- diff --git a/drivers/reset/Kconfig b/drivers/reset/Kconfig index 2e01bd8..d9a02b7 100644 --- a/drivers/reset/Kconfig +++ b/drivers/reset/Kconfig @@ -40,6 +40,14 @@ config RESET_BERLIN help This enables the reset controller driver for Marvell Berlin SoCs. +config RESET_BRCMSTB + tristate "Broadcom STB reset controller" + depends on ARCH_BRCMSTB || COMPILE_TEST + default ARCH_BRCMSTB + help + This enables the reset controller driver for Broadcom STB SoCs using + a SUN_TOP_CTRL_SW_INIT style controller. + config RESET_HSDK bool "Synopsys HSDK Reset Driver" depends on HAS_IOMEM diff --git a/drivers/reset/Makefile b/drivers/reset/Makefile index dc7874d..7395db2 100644 --- a/drivers/reset/Makefile +++ b/drivers/reset/Makefile @@ -7,6 +7,7 @@ obj-$(CONFIG_RESET_A10SR) += reset-a10sr.o obj-$(CONFIG_RESET_ATH79) += reset-ath79.o obj-$(CONFIG_RESET_AXS10X) += reset-axs10x.o obj-$(CONFIG_RESET_BERLIN) += reset-berlin.o +obj-$(CONFIG_RESET_BRCMSTB) += reset-brcmstb.o obj-$(CONFIG_RESET_HSDK) += reset-hsdk.o obj-$(CONFIG_RESET_IMX7) += reset-imx7.o obj-$(CONFIG_RESET_LANTIQ) += reset-lantiq.o diff --git a/drivers/reset/reset-brcmstb.c b/drivers/reset/reset-brcmstb.c new file mode 100644 index 0000000..a608f44 --- /dev/null +++ b/drivers/reset/reset-brcmstb.c @@ -0,0 +1,132 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Broadcom STB generic reset controller for SW_INIT style reset controller + * + * Author: Florian Fainelli + * Copyright (C) 2018 Broadcom + */ +#include +#include +#include +#include +#include +#include +#include +#include + +struct brcmstb_reset { + void __iomem *base; + struct reset_controller_dev rcdev; +}; + +#define SW_INIT_SET 0x00 +#define SW_INIT_CLEAR 0x04 +#define SW_INIT_STATUS 0x08 + +#define SW_INIT_BIT(id) BIT((id) & 0x1f) +#define SW_INIT_BANK(id) ((id) >> 5) + +/* A full bank contains extra registers that we are not utilizing but still + * qualify as a single bank. + */ +#define SW_INIT_BANK_SIZE 0x18 + +static inline +struct brcmstb_reset *to_brcmstb(struct reset_controller_dev *rcdev) +{ + return container_of(rcdev, struct brcmstb_reset, rcdev); +} + +static int brcmstb_reset_assert(struct reset_controller_dev *rcdev, + unsigned long id) +{ + unsigned int off = SW_INIT_BANK(id) * SW_INIT_BANK_SIZE; + struct brcmstb_reset *priv = to_brcmstb(rcdev); + + writel_relaxed(SW_INIT_BIT(id), priv->base + off + SW_INIT_SET); + + return 0; +} + +static int brcmstb_reset_deassert(struct reset_controller_dev *rcdev, + unsigned long id) +{ + unsigned int off = SW_INIT_BANK(id) * SW_INIT_BANK_SIZE; + struct brcmstb_reset *priv = to_brcmstb(rcdev); + + writel_relaxed(SW_INIT_BIT(id), priv->base + off + SW_INIT_CLEAR); + /* Maximum reset delay after de-asserting a line and seeing block + * operation is typically 14us for the worst case, build some slack + * here. + */ + usleep_range(100, 200); + + return 0; +} + +static int brcmstb_reset_status(struct reset_controller_dev *rcdev, + unsigned long id) +{ + unsigned int off = SW_INIT_BANK(id) * SW_INIT_BANK_SIZE; + struct brcmstb_reset *priv = to_brcmstb(rcdev); + + return readl_relaxed(priv->base + off + SW_INIT_STATUS) & + SW_INIT_BIT(id); +} + +static const struct reset_control_ops brcmstb_reset_ops = { + .assert = brcmstb_reset_assert, + .deassert = brcmstb_reset_deassert, + .status = brcmstb_reset_status, +}; + +static int brcmstb_reset_probe(struct platform_device *pdev) +{ + struct device *kdev = &pdev->dev; + struct brcmstb_reset *priv; + struct resource *res; + + priv = devm_kzalloc(kdev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!IS_ALIGNED(res->start, SW_INIT_BANK_SIZE) || + !IS_ALIGNED(resource_size(res), SW_INIT_BANK_SIZE)) { + dev_err(kdev, "incorrect register range\n"); + return -EINVAL; + } + + priv->base = devm_ioremap_resource(kdev, res); + if (IS_ERR(priv->base)) + return PTR_ERR(priv->base); + + dev_set_drvdata(kdev, priv); + + priv->rcdev.owner = THIS_MODULE; + priv->rcdev.nr_resets = DIV_ROUND_DOWN_ULL(resource_size(res), + SW_INIT_BANK_SIZE) * 32; + priv->rcdev.ops = &brcmstb_reset_ops; + priv->rcdev.of_node = kdev->of_node; + /* Use defaults: 1 cell and simple xlate function */ + + return devm_reset_controller_register(kdev, &priv->rcdev); +} + +static const struct of_device_id brcmstb_reset_of_match[] = { + { .compatible = "brcm,brcmstb-reset" }, + { /* sentinel */ } +}; + +static struct platform_driver brcmstb_reset_driver = { + .probe = brcmstb_reset_probe, + .driver = { + .name = "brcmstb-reset", + .of_match_table = brcmstb_reset_of_match, + }, +}; +module_platform_driver(brcmstb_reset_driver); + +MODULE_AUTHOR("Broadcom"); +MODULE_DESCRIPTION("Broadcom STB reset controller"); +MODULE_LICENSE("GPL");