From: Stan Shebs Date: Thu, 4 May 1995 01:00:29 +0000 (+0000) Subject: * monitor.c (monitor_command): Don't use PROMPT until monitor X-Git-Tag: gdb-4_18~11830 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=774e5d7f648d0b953c0d1ef415c6aaf885f5dea9;p=platform%2Fupstream%2Fbinutils.git * monitor.c (monitor_command): Don't use PROMPT until monitor target is known to be open. (monitor_make_srec): Don't define size of hextab. --- diff --git a/gdb/ChangeLog b/gdb/ChangeLog index cf9439f..825ad33 100644 --- a/gdb/ChangeLog +++ b/gdb/ChangeLog @@ -1,3 +1,22 @@ +Wed May 3 17:54:47 1995 Stan Shebs + + * monitor.c (monitor_command): Don't use PROMPT until monitor + target is known to be open. + (monitor_make_srec): Don't define size of hextab. + +Tue May 2 18:32:24 1995 Stan Shebs + + * configure.in (--enable-netrom): New configuration option. + * Makefile.in (REMOTE_OBS): Rename from REMOTE_O, append + value of NETROM_OBS. + (NETROM_OBS): New variable. + * remote-nrom.c: New file, NetROM target support. + * config/a29k/a29k-udi.mt, config/i960/vxworks960.mt: Use + REMOTE_OBS instead of REMOTE_O. +start-sanitize-arc + * config/arc/arc.mt: Ditto. +end-sanitize-arc + Fri Apr 28 23:30:00 1995 Stu Grossman (grossman@cygnus.com) * array-rom.c (_initialize_array array_open): Move baud_rate diff --git a/gdb/monitor.c b/gdb/monitor.c index 7526d33..73236a9 100644 --- a/gdb/monitor.c +++ b/gdb/monitor.c @@ -44,13 +44,7 @@ Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include "regex.h" static void monitor_command PARAMS ((char *args, int fromtty)); -static void monitor_load_srec PARAMS ((char *args, int protocol)); -static int getacknak PARAMS ((int byte)); - -static void make_xmodem_packet PARAMS ((unsigned char *packet, - unsigned char *data, - int len)); -static void print_xmodem_packet PARAMS ((char *packet)); +static void monitor_load_srec PARAMS ((char *args)); static int monitor_make_srec PARAMS ((char *buffer, int type, CORE_ADDR memaddr, @@ -80,24 +74,10 @@ static unsigned long get_hex_word PARAMS ((void)); static struct monitor_ops *current_monitor; -static char *loadtype_str = "srec"; -static char *loadproto_str = "none"; - -static int hashmark; /* flag set by "set hash" */ +static int hashmark; /* flag set by "set hash" */ static int timeout = 30; -static int expect PARAMS ((char *string, char *buf, int buflen)); -static int expect_prompt PARAMS ((char *buf, int buflen)); - -/* Having this larger than 400 causes us to be incompatible with m68k-stub.c - and i386-stub.c. Normally, no one would notice because it only matters - for writing large chunks of memory (e.g. in downloads). Also, this needs - to be more than 400 if required to hold the registers (see below, where - we round it up based on REGISTER_BYTES). */ - -#define PBUFSIZ 400 - /* Descriptor for I/O to remote machine. Initialize it to NULL so that monitor_open knows that we don't have a file open when the program starts. */ @@ -118,28 +98,16 @@ static char fastmap[256]; static int dump_reg_flag; /* Non-zero means do a dump_registers cmd when monitor_wait wakes up. */ -/* These definitions are for xmodem protocol. */ - -#define SOH 0x01 -#define ACK 0x06 -#define NAK 0x15 -#define EOT 0x04 -#define CANCEL 0x18 -#define GETACK getacknak(ACK) -#define GETNAK getacknak(NAK) -#define XMODEM_DATASIZE 128 /* the data size is ALWAYS 128 */ -#define XMODEM_PACKETSIZE 131 /* the packet size is ALWAYS 132 (zero based) */ -#define XMODEM 1 - -/* printf_monitor -- send data to monitor. Works just like printf. */ +/* monitor_printf -- send data to monitor. Works just like printf. */ -static void -printf_monitor (va_alist) +void +monitor_printf (va_alist) va_dcl { va_list args; char *pattern; - char buf[PBUFSIZ]; + char buf[2000]; + int len; va_start (args); @@ -150,23 +118,13 @@ printf_monitor (va_alist) if (remote_debug > 0) fputs_unfiltered (buf, gdb_stderr); - if (strlen (buf) > PBUFSIZ) - error ("printf_monitor(): string too long"); - if (SERIAL_WRITE(monitor_desc, buf, strlen (buf))) - fprintf_unfiltered (stderr, "SERIAL_WRITE failed: %s\n", safe_strerror (errno)); -} + len = strlen (buf); -/* Send raw data to monitor. */ + if (len + 1 > sizeof buf) + abort (); -static void -write_monitor (data, len) - char *data; - int len; -{ - if (SERIAL_WRITE (monitor_desc, data, len)) - fprintf_unfiltered (stderr, "SERIAL_WRITE failed: %s\n", safe_strerror(errno)); - - *(data + len + 1) = '\0'; + if (SERIAL_WRITE(monitor_desc, buf, len)) + fprintf_unfiltered (stderr, "SERIAL_WRITE failed: %s\n", safe_strerror (errno)); } /* Read a character from the remote system, doing all the fancy @@ -199,8 +157,8 @@ readchar (timeout) (minus the terminating NUL). Note that in the non-overflow case, STRING will be at the end of BUF. */ -static int -expect (string, buf, buflen) +int +monitor_expect (string, buf, buflen) char *string; char *buf; int buflen; @@ -259,7 +217,7 @@ expect (string, buf, buflen) o *then* wait for the prompt. Thus the last thing that a procedure does with the serial line - will be an expect_prompt(). Exception: monitor_resume does not + will be an monitor_expect_prompt(). Exception: monitor_resume does not wait for the prompt, because the terminal is being handed over to the inferior. However, the next thing which happens after that is a monitor_wait which does wait for the prompt. @@ -267,12 +225,12 @@ expect (string, buf, buflen) necessary to prevent getting into states from which we can't recover. */ -static int -expect_prompt (buf, buflen) +int +monitor_expect_prompt (buf, buflen) char *buf; int buflen; { - return expect (PROMPT, buf, buflen); + return monitor_expect (PROMPT, buf, buflen); } /* Get N 32-bit words from remote, each preceded by a space, and put @@ -386,36 +344,18 @@ monitor_open (args, mon_ops, from_tty) /* wake up the monitor and see if it's alive */ for (p = mon_ops->init; *p != NULL; p++) { - printf_monitor (*p); - expect_prompt (NULL, 0); + monitor_printf (*p); + monitor_expect_prompt (NULL, 0); } /* Remove all breakpoints */ if (mon_ops->clr_all_break) { - printf_monitor (mon_ops->clr_all_break); - expect_prompt (NULL, 0); + monitor_printf (mon_ops->clr_all_break); + monitor_expect_prompt (NULL, 0); } - /* Setup the suffixes for the `set remoteloadtype' command */ - - add_show_from_set (add_set_enum_cmd ("remoteloadtype", no_class, - mon_ops->loadtypes, - (char *)&loadtype_str, - "Set the remote load type.", - &setlist), - &showlist); - - /* Setup the suffixes for the `set remoteloadprotocol' command */ - - add_show_from_set (add_set_enum_cmd ("remoteloadprotocol", no_class, - mon_ops->loadprotos, - (char *)&loadproto_str, - "Set the remote load protocol.", - &setlist), - &showlist); - if (from_tty) printf_unfiltered ("Remote target %s connected to %s\n", name, dev_name); @@ -423,7 +363,7 @@ monitor_open (args, mon_ops, from_tty) inferior_pid = 42000; /* Make run command think we are busy... */ - printf_monitor ("\r"); /* Give monitor_wait something to read */ + monitor_printf ("\r"); /* Give monitor_wait something to read */ start_remote (); } @@ -487,10 +427,10 @@ monitor_resume (pid, step, sig) enum target_signal sig; { if (step) - printf_monitor (STEP_CMD); + monitor_printf (STEP_CMD); else { - printf_monitor (CONT_CMD); + monitor_printf (CONT_CMD); if (current_monitor->flags & MO_NEED_REGDUMP_AFTER_CONT) dump_reg_flag = 1; } @@ -536,7 +476,7 @@ monitor_wait (pid, status) struct target_waitstatus *status; { int old_timeout = timeout; - char buf[512]; + char buf[1024]; int resp_len; status->kind = TARGET_WAITKIND_EXITED; @@ -546,7 +486,7 @@ monitor_wait (pid, status) do { - resp_len = expect_prompt (buf, sizeof (buf)); + resp_len = monitor_expect_prompt (buf, sizeof (buf)); if (resp_len <= 0) fprintf_unfiltered (gdb_stderr, "monitor_wait: excessive response from monitor: %s.", buf); @@ -559,8 +499,8 @@ monitor_wait (pid, status) { dump_reg_flag = 0; - printf_monitor (current_monitor->dump_registers); - resp_len = expect_prompt (buf, sizeof (buf)); + monitor_printf (current_monitor->dump_registers); + resp_len = monitor_expect_prompt (buf, sizeof (buf)); } if (current_monitor->register_pattern) @@ -583,15 +523,19 @@ monitor_fetch_register (regno) char *p; char *name; int resp_len; + static char zerobuf[MAX_REGISTER_RAW_SIZE] = {0}; name = REGNAMES (regno); if (!name) - return; + { + supply_register (regno, zerobuf); + return; + } /* send the register examine command */ - printf_monitor (current_monitor->getreg.cmd, name); + monitor_printf (current_monitor->getreg.cmd, name); /* If TERM is present, we wait for that to show up. Also, (if TERM is present), we will send TERM_CMD if that is present. In any case, we collect @@ -599,7 +543,7 @@ monitor_fetch_register (regno) if (current_monitor->getreg.term) { - resp_len = expect (current_monitor->getreg.term, buf, sizeof buf); /* get response */ + resp_len = monitor_expect (current_monitor->getreg.term, buf, sizeof buf); /* get response */ if (resp_len <= 0) error ("monitor_fetch_register (%d): excessive response from monitor: %.*s.", @@ -609,11 +553,11 @@ monitor_fetch_register (regno) { SERIAL_WRITE (monitor_desc, current_monitor->getreg.term_cmd, strlen (current_monitor->getreg.term_cmd)); - expect_prompt (NULL, 0); + monitor_expect_prompt (NULL, 0); } } else - resp_len = expect_prompt (buf, sizeof buf); /* get response */ + resp_len = monitor_expect_prompt (buf, sizeof buf); /* get response */ /* If RESP_DELIM is specified, we search for that as a leading delimiter for @@ -667,14 +611,14 @@ monitor_store_register (regno) /* send the register deposit command */ - printf_monitor (current_monitor->setreg.cmd, name, val); + monitor_printf (current_monitor->setreg.cmd, name, val); /* It's possible that there are actually some monitors out there that will prompt you when you set a register. In that case, you may need to add some code here to deal with TERM and TERM_CMD (see monitor_fetch_register to get an idea of what's needed...) */ - expect_prompt (NULL, 0); + monitor_expect_prompt (NULL, 0); } /* Store the remote registers. */ @@ -733,11 +677,11 @@ monitor_write_memory (memaddr, myaddr, len) if (i > 4) /* More than 4 zeros is worth doing */ { if (current_monitor->flags & MO_FILL_USES_ADDR) - printf_monitor (current_monitor->fill, memaddr, memaddr + i, 0); + monitor_printf (current_monitor->fill, memaddr, memaddr + i, 0); else - printf_monitor (current_monitor->fill, memaddr, i, 0); + monitor_printf (current_monitor->fill, memaddr, i, 0); - expect_prompt (NULL, 0); + monitor_expect_prompt (NULL, 0); return i; } @@ -766,9 +710,9 @@ monitor_write_memory (memaddr, myaddr, len) val = extract_unsigned_integer (myaddr, len); - printf_monitor (cmd, memaddr, val); + monitor_printf (cmd, memaddr, val); - expect_prompt (NULL, 0); + monitor_expect_prompt (NULL, 0); return len; } @@ -785,7 +729,7 @@ monitor_read_memory (memaddr, myaddr, len) { unsigned LONGEST val; unsigned char regbuf[MAX_REGISTER_RAW_SIZE]; - char buf[200]; + char buf[512]; char *p, *p1; char *name; int resp_len; @@ -793,9 +737,16 @@ monitor_read_memory (memaddr, myaddr, len) len = min (len, 16); +/* See if xfer would cross a 16 byte boundary. If so, clip it. */ + if (((memaddr ^ (memaddr + len - 1)) & ~0xf) != 0) + len = ((memaddr + len) & ~0xf) - memaddr; + /* send the memory examine command */ - printf_monitor (current_monitor->getmem.cmdb, memaddr, len); + if (current_monitor->flags & MO_GETMEM_NEEDS_RANGE) + monitor_printf (current_monitor->getmem.cmdb, memaddr, memaddr + len - 1); + else + monitor_printf (current_monitor->getmem.cmdb, memaddr, len); /* If TERM is present, we wait for that to show up. Also, (if TERM is present), we will send TERM_CMD if that is present. In any case, we collect @@ -803,7 +754,7 @@ monitor_read_memory (memaddr, myaddr, len) if (current_monitor->getmem.term) { - resp_len = expect (current_monitor->getmem.term, buf, sizeof buf); /* get response */ + resp_len = monitor_expect (current_monitor->getmem.term, buf, sizeof buf); /* get response */ if (resp_len <= 0) error ("monitor_read_memory (0x%x): excessive response from monitor: %.*s.", @@ -813,11 +764,16 @@ monitor_read_memory (memaddr, myaddr, len) { SERIAL_WRITE (monitor_desc, current_monitor->getmem.term_cmd, strlen (current_monitor->getmem.term_cmd)); - expect_prompt (NULL, 0); + monitor_expect_prompt (NULL, 0); } } else - resp_len = expect_prompt (buf, sizeof buf); /* get response */ + resp_len = monitor_expect_prompt (buf, sizeof buf); /* get response */ + + p = buf; + + while (*p != '\r') /* Skip command echo and line delim */ + p++; /* If RESP_DELIM is specified, we search for that as a leading delimiter for the values. Otherwise, we just start searching from the start of the buf. @@ -825,25 +781,38 @@ monitor_read_memory (memaddr, myaddr, len) if (current_monitor->getmem.resp_delim) { - p = strstr (buf, current_monitor->getmem.resp_delim); + p = strstr (p, current_monitor->getmem.resp_delim); if (!p) error ("monitor_read_memory (0x%x): bad response from monitor: %.*s.", memaddr, resp_len, buf); p += strlen (current_monitor->getmem.resp_delim); } - else - p = buf; for (i = len; i > 0; i--) { + /* Skip non-hex chars, but bomb on end of string and newlines */ + + while (1) + { + if (isxdigit (*p)) + break; + if (*p == '\000' || *p == '\n' || *p == '\r') + error ("monitor_read_memory (0x%x): badly terminated response from monitor: %.*s", memaddr, resp_len, buf); + p++; + } + val = strtoul (p, &p1, 16); if (val == 0 && p == p1) error ("monitor_read_memory (0x%x): bad value from monitor: %.*s.", memaddr, resp_len, buf); - p = p1; *myaddr++ = val; + + if (i == 1) + break; + + p = p1; } return len; @@ -919,8 +888,8 @@ monitor_insert_breakpoint (addr, shadow) { breakaddr[i] = addr; monitor_read_memory (addr, shadow, sizeof (break_insn)); - printf_monitor (SET_BREAK_CMD, addr); - expect_prompt (NULL, 0); + monitor_printf (SET_BREAK_CMD, addr); + monitor_expect_prompt (NULL, 0); return 0; } } @@ -944,10 +913,10 @@ monitor_remove_breakpoint (addr, shadow) breakaddr[i] = 0; /* some monitors remove breakpoints based on the address */ if (current_monitor->flags & MO_CLR_BREAK_USES_ADDR) - printf_monitor (CLR_BREAK_CMD, addr); + monitor_printf (CLR_BREAK_CMD, addr); else - printf_monitor (CLR_BREAK_CMD, i); - expect_prompt (NULL, 0); + monitor_printf (CLR_BREAK_CMD, i); + monitor_expect_prompt (NULL, 0); return 0; } } @@ -955,50 +924,17 @@ monitor_remove_breakpoint (addr, shadow) return 1; } -/* monitor_load -- load a file. This file determines which of the - * supported formats to use. The current types are: - * FIXME: not all types supported yet. - * default - reads any file using bfd and writes it to memory. This - * is really slow. - * srec - reads binary file using bfd and writes it as an - * ascii srecord. - * xmodem-bin - reads a binary file using bfd, and downloads it - * using xmodem protocol. - * xmodem-srec - reads a binary file using bfd, and after converting - * it downloads it as an srecord using xmodem protocol. - * ascii-srec - reads a ascii srecord file and downloads it - * without a change. - * ascii-xmodem - reads a ascii file and downloads using xmodem - * protocol. - */ +/* monitor_load -- download a file. */ static void monitor_load (file, from_tty) char *file; int from_tty; { - /* default, load a binary */ - if (STREQ (loadtype_str, "default")) - error ("default load type not supported."); - - /* load an srecord by converting */ - else if ((STREQ (loadtype_str, "srec")) && STREQ (loadproto_str, "xmodem")) - monitor_load_srec (file, XMODEM); - - /* load an srecord by converting */ - else if (STREQ (loadtype_str, "srec")) - monitor_load_srec (file, 0); /* if from a binary */ - - /* load an srecord by converting */ - else if (STREQ (loadtype_str, "none")) - error ("Unimplemented"); - - /* load an srecord file */ - else if (STREQ (loadproto_str, "none")) - monitor_load_srec (file, 0); - - else if (STREQ (loadproto_str, "xmodem")) - monitor_load_srec (file, XMODEM); + if (current_monitor->load_routine) + current_monitor->load_routine (monitor_desc, file, hashmark); + else + monitor_load_srec (file); /* Finally, make the PC point at the start address */ @@ -1021,8 +957,8 @@ monitor_stop () if (!current_monitor->stop) return; - printf_monitor(current_monitor->stop); - expect_prompt (NULL, 0); + monitor_printf(current_monitor->stop); + monitor_expect_prompt (NULL, 0); } /* Put a command string, in args, out to MONITOR. Output from MONITOR @@ -1038,54 +974,33 @@ monitor_command (args, from_tty) int resp_len; char buf[1000]; - p = PROMPT; - if (monitor_desc == NULL) error ("monitor target not open."); + p = PROMPT; + /* Send the command. Note that if no args were supplied, then we're just sending the monitor a newline, which is sometimes useful. */ - printf_monitor ("%s\r", (args ? args : "")); + monitor_printf ("%s\r", (args ? args : "")); - resp_len = expect_prompt (buf, sizeof buf); + resp_len = monitor_expect_prompt (buf, sizeof buf); fputs_unfiltered (buf, gdb_stdout); /* Output the response */ } -/* Download a binary file by converting it to srecords. This - will also use xmodem to download the resulting file. - - A download goes like this when using xmodem: - Receiver: Sender - NAK ----------> - <-------- (packet) [SOH|1|1|data|SUM] - ACK ----------> - <-------- (packet) [SOH|2|2|data|SUM] - ACK ----------> - <-------- EOT - ACK ----------> - - ACK = 0x06 - NAK = 0x15 - EOT = 0x04 - */ +/* Download a binary file by converting it to S records. */ static void -monitor_load_srec (args, protocol) +monitor_load_srec (args) char *args; - int protocol; { bfd *abfd; asection *s; char *buffer, srec[1024]; - char packet[XMODEM_PACKETSIZE]; int i; - int retries; - int srec_frame = 57; /* FIXME: this must be 57 There is 12 bytes - of header, and 2 bytes of checksum at the end. - The problem is an xmodem packet holds exactly - 128 bytes. */ + int srec_frame = 128; + int reclen; buffer = alloca (srec_frame * 2 + 256); @@ -1102,23 +1017,17 @@ monitor_load_srec (args, protocol) return; } - printf_monitor (LOAD_CMD); /* tell the monitor to load */ + monitor_printf (LOAD_CMD); /* tell the monitor to load */ if (current_monitor->loadresp) - expect (current_monitor->loadresp, NULL, 0); + monitor_expect (current_monitor->loadresp, NULL, 0); - /* get the NAK from the target */ - if (protocol == XMODEM && !GETNAK) - { - printf_monitor ("%c", EOT); - error ("Never got the NAK to start loading"); - } - for (s = abfd->sections; s; s = s->next) if (s->flags & SEC_LOAD) { printf_filtered ("%s\t: 0x%4x .. 0x%4x ", s->name, s->vma, s->vma + s->_raw_size); gdb_flush (gdb_stdout); + for (i = 0; i < s->_raw_size; i += srec_frame) { int numbytes; @@ -1126,39 +1035,10 @@ monitor_load_srec (args, protocol) numbytes = min (srec_frame, s->_raw_size - i); bfd_get_section_contents (abfd, s, buffer, i, numbytes); - monitor_make_srec (srec, 3, s->vma + i, buffer, numbytes); - /* send a packet using xmodem */ - if (protocol == XMODEM) - { - make_xmodem_packet (packet, srec, XMODEM_DATASIZE); - write_monitor (packet, XMODEM_PACKETSIZE+1); - - for (retries = 3; retries >= 0; retries++) - { - if (GETACK) /* ACKnowledged, get next data chunk */ - break; - - /* Resend packet */ - - sleep (1); - /* send it again */ - write_monitor (packet, XMODEM_PACKETSIZE+1); - - if (hashmark) - { - putchar_unfiltered ('-'); - gdb_flush (gdb_stdout); - } - } - if (retries < 0) - { /* too many tries, must be hosed */ - printf_monitor ("%c", EOT); - error ("Never got a ACK after sending an xmodem packet"); - } - } - else - printf_monitor ("%s\n", srec); /* no protocols at all */ + reclen = monitor_make_srec (srec, 3, s->vma + i, buffer, numbytes); + + monitor_printf ("%.*s\r", reclen, srec); if (hashmark) { @@ -1166,6 +1046,7 @@ monitor_load_srec (args, protocol) gdb_flush (gdb_stdout); } } /* Per-packet (or S-record) loop */ + putchar_unfiltered ('\n'); } /* Loadable sections */ @@ -1175,68 +1056,13 @@ monitor_load_srec (args, protocol) /* Write a type 7 terminator record. no data for a type 7, and there is no data, so len is 0. */ - if (protocol == XMODEM) - { - /* send a packet using xmodem */ - monitor_make_srec (srec, 7, abfd->start_address, "", 0); - make_xmodem_packet (packet, srec, XMODEM_DATASIZE); - write_monitor (packet, XMODEM_PACKETSIZE+1); - printf_monitor ("%c", EOT); - if (!GETACK) - error ("Never got ACK after sending EOT"); - } - else - { - monitor_make_srec (srec, 7, abfd->start_address, "", 0); - printf_monitor ("%s\n", srec); - } + reclen = monitor_make_srec (srec, 7, abfd->start_address, NULL, 0); - expect_prompt (NULL, 0); -} + monitor_printf ("%.*s\r", reclen, srec); -/* Get an ACK or a NAK from the target. returns 1 (true) or 0 (false) - This is for xmodem. ANy string starting with "***" is an error - message from the target. Here's a few from the WinBond w89k - "Cougar" PA board: - *** Too many errors found. - *** Bad command - *** Command syntax error - */ - -static int -getacknak (byte) - int byte; -{ - char character; - int i; - - i = 0; - while (i++ < 60) - { - character = (char) readchar (0); - if ((character == 0xfffffffe) || (character == 0x7f)) - { /* empty uart */ - sleep (1); - continue; - } - if (character == CANCEL) - { /* target aborted load */ - expect_prompt (NULL, 0); - error ("Got a CANCEL from the target."); - } - if (character == '*') - { /* look for missed error message */ - expect_prompt (NULL, 0); - error ("Got an error message from the target"); - } - if (character == byte) /* got what we wanted */ - return 1; - if (character == ((byte == ACK) ? NAK : ACK)) - return 0; - sleep (1); - } + monitor_printf ("\r\r"); /* Some monitors need these to wake up */ - return 0; + monitor_expect_prompt (NULL, 0); } /* @@ -1278,6 +1104,9 @@ getacknak (byte) * - checksum * is the sum of all the raw byte data in the record, from the length * upwards, modulo 256 and subtracted from 255. + * + * This routine returns the length of the S-record. + * */ static int @@ -1288,9 +1117,10 @@ monitor_make_srec (buffer, type, memaddr, myaddr, len) unsigned char *myaddr; int len; { - int checksum; + unsigned char checksum; int i; char *buf; + static char hextab[] = "0123456789ABCDEF"; buf = buffer; @@ -1302,8 +1132,12 @@ monitor_make_srec (buffer, type, memaddr, myaddr, len) sprintf (buf, "S%d%02X%08X", type, len + 4 + 1, memaddr); buf += 12; - checksum += (len + 4 + 1 /* calculate the checksum */ - + (memaddr & 0xff) +/* Note that the checksum is calculated on the raw data, not the hexified + data. It includes the length, address and the data portions of the + packet. */ + + checksum += (len + 4 + 1 /* Packet length */ + + (memaddr & 0xff) /* Address... */ + ((memaddr >> 8) & 0xff) + ((memaddr >> 16) & 0xff) + ((memaddr >> 24) & 0xff)); @@ -1311,106 +1145,17 @@ monitor_make_srec (buffer, type, memaddr, myaddr, len) /* build the srecord */ for (i = 0; i < len; i++) { - sprintf (buf, "%02X", myaddr[i]); + *buf++ = hextab [myaddr[i] >> 4]; + *buf++ = hextab [myaddr[i] & 0xf]; checksum += myaddr[i]; - buf += 2; } - sprintf(buf, "%02X", ~checksum & 0xff); /* add the checksum */ - - return 0; -} + checksum = ~checksum; -/* Take 128 bytes of data and make a packet out of it. - * - * Each packet looks like this: - * +-----+-------+-------+------+-----+ - * | SOH | Seq1. | Seq2. | data | SUM | - * +-----+-------+-------+------+-----+ - * SOH = 0x01 - * Seq1 = The sequence number. - * Seq2 = The complement of the sequence number. - * Data = A 128 bytes of data. - * SUM = Add the contents of the 128 bytes and use the low-order - * 8 bits of the result. - */ + *buf++ = hextab[checksum >> 4]; + *buf++ = hextab[checksum & 0xf]; -static void -make_xmodem_packet (packet, data, len) - unsigned char *packet; - unsigned char *data; - int len; -{ - static int sequence = 1; - int i, sum; - unsigned char *buf; - - buf = data; - /* build the packet header */ - packet[0] = SOH; - packet[1] = sequence; - packet[2] = 255 - sequence; - sequence++; -#if 0 - packet[2] = ~sequence++; /* the complement is the sequence checksum */ -#endif - - sum = 0; /* calculate the data checksum */ - for (i = 3; i <= len + 2; i++) { - packet[i] = *buf; - sum += *buf; - buf++; - } - - /* add padding for the rest of the packet */ - for (i = len+1 ; i <= XMODEM_DATASIZE ; i++) - packet[i] = '0'; - - packet[XMODEM_PACKETSIZE] = sum & 0xff; /* add the checksum */ -} - -/* Print the packet as a debug check. */ - -static void -print_xmodem_packet (packet) - char *packet; -{ - int i; - static int lastseq; - int sum; - - /* take apart the packet header the packet header */ - if (packet[0] == SOH) - printf_unfiltered ("SOH"); - else - error ("xmodem: SOH is wrong"); - - /* check the sequence */ - if (packet[1] != 0) - { - lastseq = packet[1]; - if (packet[2] != ~lastseq) - error ("xmodem: Sequence checksum is wrong"); - else - printf_filtered (" %d %d", lastseq, ~lastseq); - } - - /* check the data checksum */ - sum = 0; - for (i = 3; i <= XMODEM_DATASIZE; i++) - sum += packet[i]; - - /* ignore the data */ -#if 0 - printf_unfiltered (" [128 bytes of data] %d\n", sum & 0xff); -#endif - printf_filtered (" [%s] %d\n", packet, sum & 0xff); - - if ((packet[XMODEM_PACKETSIZE] & 0xff) != (sum & 0xff)) - printf_unfiltered ("xmodem: data checksum wrong, got a %d", - packet[XMODEM_PACKETSIZE] & 0xff); - - putchar_unfiltered ('\n'); + return buf - buffer; } /* Convert hex digit A to a number. */ @@ -1429,7 +1174,8 @@ from_hex (a) error ("Reply contains invalid hex digit 0x%x", a); } -static struct target_ops monitor_ops = { +static struct target_ops monitor_ops = +{ NULL, /* to_shortname */ NULL, /* to_longname */ NULL, /* to_doc */