From: Russell King Date: Tue, 28 Nov 2017 15:02:05 +0000 (+0000) Subject: ARM: dts: imx6qdl: SolidRun: move AR8035 into microsom X-Git-Tag: v4.19~1679^2~20^2~105 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=76dc340e75852a5bf9d8e7ccb451f9be79a6695b;p=platform%2Fkernel%2Flinux-rpi.git ARM: dts: imx6qdl: SolidRun: move AR8035 into microsom As all SolidRun microsoms are fitted with an AR8035, it's pointless having the ethernet support as a separate include file. Move the AR8035 support into the main imx6qdl-microsom file. Signed-off-by: Russell King Reviewed-by: Fabio Estevam Signed-off-by: Shawn Guo --- diff --git a/arch/arm/boot/dts/imx6q-h100.dts b/arch/arm/boot/dts/imx6q-h100.dts index a3269f5..bf5dfc9 100644 --- a/arch/arm/boot/dts/imx6q-h100.dts +++ b/arch/arm/boot/dts/imx6q-h100.dts @@ -43,7 +43,6 @@ #include "imx6q.dtsi" #include "imx6qdl-microsom.dtsi" -#include "imx6qdl-microsom-ar8035.dtsi" / { model = "Auvidea H100"; diff --git a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi index b205082..57ce2db 100644 --- a/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi +++ b/arch/arm/boot/dts/imx6qdl-cubox-i.dtsi @@ -39,7 +39,6 @@ * OTHER DEALINGS IN THE SOFTWARE. */ #include "imx6qdl-microsom.dtsi" -#include "imx6qdl-microsom-ar8035.dtsi" #include #include diff --git a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi index 0a0a7e4..afd981e 100644 --- a/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi +++ b/arch/arm/boot/dts/imx6qdl-hummingboard.dtsi @@ -39,7 +39,6 @@ * OTHER DEALINGS IN THE SOFTWARE. */ #include "imx6qdl-microsom.dtsi" -#include "imx6qdl-microsom-ar8035.dtsi" / { chosen { diff --git a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi b/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi deleted file mode 100644 index 900e8c7..0000000 --- a/arch/arm/boot/dts/imx6qdl-microsom-ar8035.dtsi +++ /dev/null @@ -1,99 +0,0 @@ -/* - * Copyright (C) 2013,2014 Russell King - * - * This describes the hookup for an AR8035 to the iMX6 on the SolidRun - * MicroSOM. - * - * This file is dual-licensed: you can use it either under the terms - * of the GPL or the X11 license, at your option. Note that this dual - * licensing only applies to this file, and not this project as a - * whole. - * - * a) This file is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * version 2 as published by the Free Software Foundation. - * - * This file is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * Or, alternatively, - * - * b) Permission is hereby granted, free of charge, to any person - * obtaining a copy of this software and associated documentation - * files (the "Software"), to deal in the Software without - * restriction, including without limitation the rights to use, - * copy, modify, merge, publish, distribute, sublicense, and/or - * sell copies of the Software, and to permit persons to whom the - * Software is furnished to do so, subject to the following - * conditions: - * - * The above copyright notice and this permission notice shall be - * included in all copies or substantial portions of the Software. - * - * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, - * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES - * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND - * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT - * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, - * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING - * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR - * OTHER DEALINGS IN THE SOFTWARE. - */ -&fec { - pinctrl-names = "default"; - pinctrl-0 = <&pinctrl_microsom_enet_ar8035>; - phy-mode = "rgmii"; - phy-reset-duration = <2>; - phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; - status = "okay"; -}; - -&iomuxc { - enet { - pinctrl_microsom_enet_ar8035: microsom-enet-ar8035 { - fsl,pins = < - MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b8b0 - MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 - /* AR8035 reset */ - MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x130b0 - /* AR8035 interrupt */ - MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x80000000 - /* GPIO16 -> AR8035 25MHz */ - MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0xc0000000 - MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x80000000 - MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 - MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 - MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 - MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 - MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 - /* AR8035 CLK_25M --> ENET_REF_CLK (V22) */ - MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x0a0b1 - /* AR8035 pin strapping: IO voltage: pull up */ - MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 - /* AR8035 pin strapping: PHYADDR#0: pull down */ - MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x13030 - /* AR8035 pin strapping: PHYADDR#1: pull down */ - MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030 - /* AR8035 pin strapping: MODE#1: pull up */ - MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 - /* AR8035 pin strapping: MODE#3: pull up */ - MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 - /* AR8035 pin strapping: MODE#0: pull down */ - MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x13030 - - /* - * As the RMII pins are also connected to RGMII - * so that an AR8030 can be placed, set these - * to high-z with the same pulls as above. - * Use the GPIO settings to avoid changing the - * input select registers. - */ - MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x03000 - MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x03000 - MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x03000 - >; - }; - }; -}; diff --git a/arch/arm/boot/dts/imx6qdl-microsom.dtsi b/arch/arm/boot/dts/imx6qdl-microsom.dtsi index f7266ae..c1541f2 100644 --- a/arch/arm/boot/dts/imx6qdl-microsom.dtsi +++ b/arch/arm/boot/dts/imx6qdl-microsom.dtsi @@ -69,6 +69,15 @@ }; }; +&fec { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_microsom_enet_ar8035>; + phy-mode = "rgmii"; + phy-reset-duration = <2>; + phy-reset-gpios = <&gpio4 15 GPIO_ACTIVE_LOW>; + status = "okay"; +}; + &iomuxc { microsom { pinctrl_microsom_brcm_bt: microsom-brcm-bt { @@ -100,6 +109,50 @@ >; }; + pinctrl_microsom_enet_ar8035: microsom-enet-ar8035 { + fsl,pins = < + MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b8b0 + MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0 + /* AR8035 reset */ + MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x130b0 + /* AR8035 interrupt */ + MX6QDL_PAD_DI0_PIN2__GPIO4_IO18 0x80000000 + /* GPIO16 -> AR8035 25MHz */ + MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0xc0000000 + MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x80000000 + MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030 + MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030 + MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030 + MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030 + MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030 + /* AR8035 CLK_25M --> ENET_REF_CLK (V22) */ + MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x0a0b1 + /* AR8035 pin strapping: IO voltage: pull up */ + MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030 + /* AR8035 pin strapping: PHYADDR#0: pull down */ + MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x13030 + /* AR8035 pin strapping: PHYADDR#1: pull down */ + MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x13030 + /* AR8035 pin strapping: MODE#1: pull up */ + MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030 + /* AR8035 pin strapping: MODE#3: pull up */ + MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030 + /* AR8035 pin strapping: MODE#0: pull down */ + MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x13030 + + /* + * As the RMII pins are also connected to RGMII + * so that an AR8030 can be placed, set these + * to high-z with the same pulls as above. + * Use the GPIO settings to avoid changing the + * input select registers. + */ + MX6QDL_PAD_ENET_CRS_DV__GPIO1_IO25 0x03000 + MX6QDL_PAD_ENET_RXD0__GPIO1_IO27 0x03000 + MX6QDL_PAD_ENET_RXD1__GPIO1_IO26 0x03000 + >; + }; + pinctrl_microsom_uart1: microsom-uart1 { fsl,pins = < MX6QDL_PAD_CSI0_DAT10__UART1_TX_DATA 0x1b0b1