From: Akinobu Mita Date: Sun, 6 Mar 2016 15:27:51 +0000 (+0900) Subject: rtc: ds3232: remove unused UIE code X-Git-Tag: v5.15~13919^2~17 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=7522297e1638f985e5d52f34b871e742b10586d4;p=platform%2Fkernel%2Flinux-starfive.git rtc: ds3232: remove unused UIE code UIE mode irqs are handled by the generic rtc core now. But there are remaining unused code fragments for it. Signed-off-by: Akinobu Mita Signed-off-by: Alexandre Belloni --- diff --git a/drivers/rtc/rtc-ds3232.c b/drivers/rtc/rtc-ds3232.c index 321b867..f0ffd3f 100644 --- a/drivers/rtc/rtc-ds3232.c +++ b/drivers/rtc/rtc-ds3232.c @@ -279,32 +279,14 @@ static int ds3232_update_alarm(struct device *dev, unsigned int enabled) struct ds3232 *ds3232 = dev_get_drvdata(dev); int control; int ret; - u8 buf[4]; mutex_lock(&ds3232->mutex); - ret = regmap_bulk_read(ds3232->regmap, DS3232_REG_ALARM1, buf, 4); - if (ret) - goto unlock; - - buf[0] = bcd2bin(buf[0]) < 0 || (ds3232->rtc->irq_data & RTC_UF) ? - 0x80 : buf[0]; - buf[1] = bcd2bin(buf[1]) < 0 || (ds3232->rtc->irq_data & RTC_UF) ? - 0x80 : buf[1]; - buf[2] = bcd2bin(buf[2]) < 0 || (ds3232->rtc->irq_data & RTC_UF) ? - 0x80 : buf[2]; - buf[3] = bcd2bin(buf[3]) < 0 || (ds3232->rtc->irq_data & RTC_UF) ? - 0x80 : buf[3]; - - ret = regmap_bulk_write(ds3232->regmap, DS3232_REG_ALARM1, buf, 4); - if (ret) - goto unlock; - ret = regmap_read(ds3232->regmap, DS3232_REG_CR, &control); if (ret) goto unlock; - if (enabled || (ds3232->rtc->irq_data & RTC_UF)) + if (enabled) /* enable alarm1 interrupt */ control |= DS3232_REG_CR_A1IE; else