From: Felix Fietkau Date: Fri, 15 Mar 2013 13:53:31 +0000 (+0100) Subject: ath9k_hw: revert chainmask to user configuration after calibration X-Git-Tag: accepted/tizen/common/20141203.182822~2470^2~11^2^2~36 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=74632d11a133b5baf6b9d622dd19d2f944d93d94;p=platform%2Fkernel%2Flinux-arm64.git ath9k_hw: revert chainmask to user configuration after calibration The commit 'ath9k_hw: fix calibration issues on chainmask that don't include chain 0' changed the hardware chainmask to the chip chainmask for the duration of the calibration, but the revert to user configuration in the reset path runs too early. That causes some issues with limiting the number of antennas (including spurious failure in hardware-generated packets). Fix this by reverting the chainmask after the essential parts of the calibration that need the workaround, and before NF calibration is run. Signed-off-by: Felix Fietkau Reported-by: Wojciech Dubowik Tested-by: Wojciech Dubowik Cc: stable@vger.kernel.org Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/ath/ath9k/ar9003_calib.c b/drivers/net/wireless/ath/ath9k/ar9003_calib.c index 4cc1394..f76c3ca 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_calib.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_calib.c @@ -1023,6 +1023,7 @@ static bool ar9003_hw_init_cal(struct ath_hw *ah, AR_PHY_AGC_CONTROL_FLTR_CAL | AR_PHY_AGC_CONTROL_PKDET_CAL; + /* Use chip chainmask only for calibration */ ar9003_hw_set_chain_masks(ah, ah->caps.rx_chainmask, ah->caps.tx_chainmask); if (rtt) { @@ -1150,6 +1151,9 @@ skip_tx_iqcal: ar9003_hw_rtt_disable(ah); } + /* Revert chainmask to runtime parameters */ + ar9003_hw_set_chain_masks(ah, ah->rxchainmask, ah->txchainmask); + /* Initialize list pointers */ ah->cal_list = ah->cal_list_last = ah->cal_list_curr = NULL;