From: Aurélien Guillaume Date: Thu, 17 Jan 2013 06:55:24 +0000 (+0000) Subject: ixgbe: implement SFF diagnostic monitoring via ethtool X-Git-Tag: v3.9-rc1~139^2~46^2~2 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=71858acbe5c38e82554d92d041741ea949e46b99;p=profile%2Fivi%2Fkernel-adaptation-intel-automotive.git ixgbe: implement SFF diagnostic monitoring via ethtool This patch adds support for reading data from SFP+ modules over i2c. Signed-off-by: Aurélien Guillaume Signed-off-by: Emil Tantilov Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe.h b/drivers/net/ethernet/intel/ixgbe/ixgbe.h index b91f9b6..196002b 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe.h @@ -620,6 +620,7 @@ enum ixgbe_state_t { __IXGBE_DOWN, __IXGBE_SERVICE_SCHED, __IXGBE_IN_SFP_INIT, + __IXGBE_READ_I2C, }; struct ixgbe_cb { diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c index 7349a8b..e6cebdc 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_ethtool.c @@ -39,6 +39,7 @@ #include #include "ixgbe.h" +#include "ixgbe_phy.h" #define IXGBE_ALL_RAR_ENTRIES 16 @@ -2839,6 +2840,117 @@ static int ixgbe_set_channels(struct net_device *dev, return ixgbe_setup_tc(dev, netdev_get_num_tc(dev)); } +static int ixgbe_get_module_info(struct net_device *dev, + struct ethtool_modinfo *modinfo) +{ + struct ixgbe_adapter *adapter = netdev_priv(dev); + struct ixgbe_hw *hw = &adapter->hw; + u32 status; + u8 sff8472_rev, addr_mode; + int ret_val = 0; + bool page_swap = false; + + /* avoid concurent i2c reads */ + while (test_bit(__IXGBE_IN_SFP_INIT, &adapter->state)) + msleep(100); + + /* used by the service task */ + set_bit(__IXGBE_READ_I2C, &adapter->state); + + /* Check whether we support SFF-8472 or not */ + status = hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_SFF_8472_COMP, + &sff8472_rev); + if (status != 0) { + ret_val = -EIO; + goto err_out; + } + + /* addressing mode is not supported */ + status = hw->phy.ops.read_i2c_eeprom(hw, + IXGBE_SFF_SFF_8472_SWAP, + &addr_mode); + if (status != 0) { + ret_val = -EIO; + goto err_out; + } + + if (addr_mode & IXGBE_SFF_ADDRESSING_MODE) { + e_err(drv, "Address change required to access page 0xA2, but not supported. Please report the module type to the driver maintainers.\n"); + page_swap = true; + } + + if (sff8472_rev == IXGBE_SFF_SFF_8472_UNSUP || page_swap) { + /* We have a SFP, but it does not support SFF-8472 */ + modinfo->type = ETH_MODULE_SFF_8079; + modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN; + } else { + /* We have a SFP which supports a revision of SFF-8472. */ + modinfo->type = ETH_MODULE_SFF_8472; + modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN; + } + +err_out: + clear_bit(__IXGBE_READ_I2C, &adapter->state); + return ret_val; +} + +static int ixgbe_get_module_eeprom(struct net_device *dev, + struct ethtool_eeprom *ee, + u8 *data) +{ + struct ixgbe_adapter *adapter = netdev_priv(dev); + struct ixgbe_hw *hw = &adapter->hw; + u32 status = IXGBE_ERR_PHY_ADDR_INVALID; + u8 databyte = 0xFF; + int i = 0; + int ret_val = 0; + + /* ixgbe_get_module_info is called before this function in all + * cases, so we do not need any checks we already do above, + * and can trust ee->len to be a known value. + */ + + while (test_bit(__IXGBE_IN_SFP_INIT, &adapter->state)) + msleep(100); + set_bit(__IXGBE_READ_I2C, &adapter->state); + + /* Read the first block, SFF-8079 */ + for (i = 0; i < ETH_MODULE_SFF_8079_LEN; i++) { + status = hw->phy.ops.read_i2c_eeprom(hw, i, &databyte); + if (status != 0) { + /* Error occured while reading module */ + ret_val = -EIO; + goto err_out; + } + data[i] = databyte; + } + + /* If the second block is requested, check if SFF-8472 is supported. */ + if (ee->len == ETH_MODULE_SFF_8472_LEN) { + if (data[IXGBE_SFF_SFF_8472_COMP] == IXGBE_SFF_SFF_8472_UNSUP) + return -EOPNOTSUPP; + + /* Read the second block, SFF-8472 */ + for (i = ETH_MODULE_SFF_8079_LEN; + i < ETH_MODULE_SFF_8472_LEN; i++) { + status = hw->phy.ops.read_i2c_sff8472(hw, + i - ETH_MODULE_SFF_8079_LEN, &databyte); + if (status != 0) { + /* Error occured while reading module */ + ret_val = -EIO; + goto err_out; + } + data[i] = databyte; + } + } + +err_out: + clear_bit(__IXGBE_READ_I2C, &adapter->state); + + return ret_val; +} + static const struct ethtool_ops ixgbe_ethtool_ops = { .get_settings = ixgbe_get_settings, .set_settings = ixgbe_set_settings, @@ -2870,6 +2982,8 @@ static const struct ethtool_ops ixgbe_ethtool_ops = { .get_channels = ixgbe_get_channels, .set_channels = ixgbe_set_channels, .get_ts_info = ixgbe_get_ts_info, + .get_module_info = ixgbe_get_module_info, + .get_module_eeprom = ixgbe_get_module_eeprom, }; void ixgbe_set_ethtool_ops(struct net_device *netdev) diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c index aea252a..b0b72fc 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_main.c @@ -5709,6 +5709,10 @@ static void ixgbe_sfp_detection_subtask(struct ixgbe_adapter *adapter) !(adapter->flags2 & IXGBE_FLAG2_SFP_NEEDS_RESET)) return; + /* concurent i2c reads are not supported */ + if (test_bit(__IXGBE_READ_I2C, &adapter->state)) + return; + /* someone else is in init, wait until next service event */ if (test_and_set_bit(__IXGBE_IN_SFP_INIT, &adapter->state)) return;