From: AKASHI Takahiro Date: Wed, 3 Jul 2019 01:44:40 +0000 (+0900) Subject: arm: qemu: fix failure in flash initialization if booting from TF-A X-Git-Tag: v2019.10-rc1~24^2~16 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=70a64a070e79b657dcb4903299ccad0f5fff8267;p=platform%2Fkernel%2Fu-boot.git arm: qemu: fix failure in flash initialization if booting from TF-A If U-Boot is loaded and started from TF-A (you need to change SYS_TEXT_BASE to 0x60000000), it will hang up at flash initialization. If secure mode is off (default, or -machine virt,secure=off) at qemu, it will provide dtb with two flash memory banks: flash@0 { bank-width = <0x4>; reg = <0x0 0x0 0x0 0x4000000 0x0 0x4000000 0x0 0x4000000>; compatible = "cfi-flash"; }; If secure mode is on, on the other hand, qemu provides dtb with 1 bank: flash@0 { bank-width = <0x4>; reg = <0x0 0x4000000 0x0 0x4000000>; compatible = "cfi-flash"; }; As a result, flash_init()/flash_get_size() will eventually fail. With this patch applied, relevant CONFIG values are modified. Signed-off-by: AKASHI Takahiro Tested-by: Heinrich Schuchardt --- diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 602d61e..51d4ace 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -840,6 +840,7 @@ config ARCH_OWL config ARCH_QEMU bool "QEMU Virtual Platform" + select ARCH_SUPPORT_TFABOOT select DM select DM_SERIAL select OF_CONTROL diff --git a/include/configs/qemu-arm.h b/include/configs/qemu-arm.h index 65fdb1e..35e3c5a 100644 --- a/include/configs/qemu-arm.h +++ b/include/configs/qemu-arm.h @@ -46,8 +46,13 @@ #define CONFIG_SYS_CBSIZE 512 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE +#ifdef CONFIG_TFABOOT +#define CONFIG_SYS_FLASH_BASE 0x4000000 +#define CONFIG_SYS_MAX_FLASH_BANKS 1 +#else #define CONFIG_SYS_FLASH_BASE 0x0 #define CONFIG_SYS_MAX_FLASH_BANKS 2 +#endif #define CONFIG_SYS_MAX_FLASH_SECT 256 /* Sector: 256K, Bank: 64M */ #endif /* __CONFIG_H */