From: Lucas Stach Date: Fri, 26 Sep 2014 13:41:00 +0000 (+0200) Subject: ARM: imx5: add step clock, used when reprogramming PLL1 X-Git-Tag: v4.14-rc1~6386^2~6^2~8 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=6f0628aa9f0fb7c877e52d4d8c6edb11bcd91736;p=platform%2Fkernel%2Flinux-rpi.git ARM: imx5: add step clock, used when reprogramming PLL1 This is the bypass clock used to feed the ARM partition while we reprogram PLL1 to another rate. Signed-off-by: Philipp Zabel Signed-off-by: Lucas Stach Signed-off-by: Shawn Guo --- diff --git a/arch/arm/mach-imx/clk-imx51-imx53.c b/arch/arm/mach-imx/clk-imx51-imx53.c index 72d6521..aafccf4 100644 --- a/arch/arm/mach-imx/clk-imx51-imx53.c +++ b/arch/arm/mach-imx/clk-imx51-imx53.c @@ -125,6 +125,8 @@ static const char *mx53_spdif_xtal_sel[] = { "osc", "ckih", "ckih2", "pll4_sw", static const char *spdif_sel[] = { "pll1_sw", "pll2_sw", "pll3_sw", "spdif_xtal_sel", }; static const char *spdif0_com_sel[] = { "spdif0_podf", "ssi1_root_gate", }; static const char *mx51_spdif1_com_sel[] = { "spdif1_podf", "ssi2_root_gate", }; +static const char *step_sels[] = { "lp_apm", }; +static const char *cpu_podf_sels[] = { "pll1_sw", "step_sel" }; static struct clk *clk[IMX5_CLK_END]; static struct clk_onecell_data clk_data; @@ -193,7 +195,9 @@ static void __init mx5_clocks_common_init(void __iomem *ccm_base) clk[IMX5_CLK_USB_PHY_PODF] = imx_clk_divider("usb_phy_podf", "usb_phy_pred", MXC_CCM_CDCDR, 0, 3); clk[IMX5_CLK_USB_PHY_SEL] = imx_clk_mux("usb_phy_sel", MXC_CCM_CSCMR1, 26, 1, usb_phy_sel_str, ARRAY_SIZE(usb_phy_sel_str)); - clk[IMX5_CLK_CPU_PODF] = imx_clk_divider("cpu_podf", "pll1_sw", MXC_CCM_CACRR, 0, 3); + clk[IMX5_CLK_STEP_SEL] = imx_clk_mux("step_sel", MXC_CCM_CCSR, 7, 2, step_sels, ARRAY_SIZE(step_sels)); + clk[IMX5_CLK_CPU_PODF_SEL] = imx_clk_mux("cpu_podf_sel", MXC_CCM_CCSR, 2, 1, cpu_podf_sels, ARRAY_SIZE(cpu_podf_sels)); + clk[IMX5_CLK_CPU_PODF] = imx_clk_divider("cpu_podf", "cpu_podf_sel", MXC_CCM_CACRR, 0, 3); clk[IMX5_CLK_DI_PRED] = imx_clk_divider("di_pred", "pll3_sw", MXC_CCM_CDCDR, 6, 3); clk[IMX5_CLK_IIM_GATE] = imx_clk_gate2("iim_gate", "ipg", MXC_CCM_CCGR0, 30); clk[IMX5_CLK_UART1_IPG_GATE] = imx_clk_gate2("uart1_ipg_gate", "ipg", MXC_CCM_CCGR1, 6); @@ -551,6 +555,9 @@ static void __init mx53_clocks_init(struct device_node *np) /* move can bus clk to 24MHz */ clk_set_parent(clk[IMX5_CLK_CAN_SEL], clk[IMX5_CLK_LP_APM]); + /* make sure step clock is running from 24MHz */ + clk_set_parent(clk[IMX5_CLK_STEP_SEL], clk[IMX5_CLK_LP_APM]); + clk_prepare_enable(clk[IMX5_CLK_IIM_GATE]); imx_print_silicon_rev("i.MX53", mx53_revision()); clk_disable_unprepare(clk[IMX5_CLK_IIM_GATE]); diff --git a/include/dt-bindings/clock/imx5-clock.h b/include/dt-bindings/clock/imx5-clock.h index 5f2667ec..1a36ff4 100644 --- a/include/dt-bindings/clock/imx5-clock.h +++ b/include/dt-bindings/clock/imx5-clock.h @@ -198,6 +198,8 @@ #define IMX5_CLK_OCRAM 186 #define IMX5_CLK_SAHARA_IPG_GATE 187 #define IMX5_CLK_SATA_REF 188 -#define IMX5_CLK_END 189 +#define IMX5_CLK_STEP_SEL 189 +#define IMX5_CLK_CPU_PODF_SEL 190 +#define IMX5_CLK_END 191 #endif /* __DT_BINDINGS_CLOCK_IMX5_H */