From: Suman Ghosh Date: Tue, 17 May 2022 04:40:55 +0000 (+0530) Subject: octeontx2-pf: Add support for adaptive interrupt coalescing X-Git-Tag: v6.6.17~7459^2~76 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=6e144b47f560edc25744498f360835b1042b73dd;p=platform%2Fkernel%2Flinux-rpi.git octeontx2-pf: Add support for adaptive interrupt coalescing Added support for adaptive IRQ coalescing. It uses net_dim algorithm to find the suitable delay/IRQ count based on the current packet rate. Signed-off-by: Suman Ghosh Link: https://lore.kernel.org/r/20220517044055.876158-1-sumang@marvell.com Signed-off-by: Jakub Kicinski --- diff --git a/drivers/net/ethernet/marvell/octeontx2/Kconfig b/drivers/net/ethernet/marvell/octeontx2/Kconfig index 639893d8..e1036b0 100644 --- a/drivers/net/ethernet/marvell/octeontx2/Kconfig +++ b/drivers/net/ethernet/marvell/octeontx2/Kconfig @@ -33,6 +33,7 @@ config OCTEONTX2_PF select OCTEONTX2_MBOX select NET_DEVLINK depends on (64BIT && COMPILE_TEST) || ARM64 + select DIMLIB depends on PCI depends on PTP_1588_CLOCK_OPTIONAL help diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c index b9d7601..fb8db58 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.c @@ -97,11 +97,6 @@ void otx2_get_dev_stats(struct otx2_nic *pfvf) { struct otx2_dev_stats *dev_stats = &pfvf->hw.dev_stats; -#define OTX2_GET_RX_STATS(reg) \ - otx2_read64(pfvf, NIX_LF_RX_STATX(reg)) -#define OTX2_GET_TX_STATS(reg) \ - otx2_read64(pfvf, NIX_LF_TX_STATX(reg)) - dev_stats->rx_bytes = OTX2_GET_RX_STATS(RX_OCTS); dev_stats->rx_drops = OTX2_GET_RX_STATS(RX_DROP); dev_stats->rx_bcast_frames = OTX2_GET_RX_STATS(RX_BCAST); diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h index c587c14..ce27663 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_common.h @@ -18,6 +18,7 @@ #include #include #include +#include #include #include @@ -54,6 +55,11 @@ enum arua_mapped_qtypes { /* Send skid of 2000 packets required for CQ size of 4K CQEs. */ #define SEND_CQ_SKID 2000 +#define OTX2_GET_RX_STATS(reg) \ + otx2_read64(pfvf, NIX_LF_RX_STATX(reg)) +#define OTX2_GET_TX_STATS(reg) \ + otx2_read64(pfvf, NIX_LF_TX_STATX(reg)) + struct otx2_lmt_info { u64 lmt_addr; u16 lmt_id; @@ -351,6 +357,7 @@ struct otx2_nic { #define OTX2_FLAG_TC_MATCHALL_EGRESS_ENABLED BIT_ULL(12) #define OTX2_FLAG_TC_MATCHALL_INGRESS_ENABLED BIT_ULL(13) #define OTX2_FLAG_DMACFLTR_SUPPORT BIT_ULL(14) +#define OTX2_FLAG_ADPTV_INT_COAL_ENABLED BIT_ULL(16) u64 flags; u64 *cq_op_addr; @@ -408,6 +415,9 @@ struct otx2_nic { u8 pfc_en; u8 *queue_to_pfc_map; #endif + + /* napi event count. It is needed for adaptive irq coalescing. */ + u32 napi_events; }; static inline bool is_otx2_lbkvf(struct pci_dev *pdev) diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c index fc328de..bc614a4 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_ethtool.c @@ -455,6 +455,14 @@ static int otx2_get_coalesce(struct net_device *netdev, cmd->rx_max_coalesced_frames = hw->cq_ecount_wait; cmd->tx_coalesce_usecs = hw->cq_time_wait; cmd->tx_max_coalesced_frames = hw->cq_ecount_wait; + if ((pfvf->flags & OTX2_FLAG_ADPTV_INT_COAL_ENABLED) == + OTX2_FLAG_ADPTV_INT_COAL_ENABLED) { + cmd->use_adaptive_rx_coalesce = 1; + cmd->use_adaptive_tx_coalesce = 1; + } else { + cmd->use_adaptive_rx_coalesce = 0; + cmd->use_adaptive_tx_coalesce = 0; + } return 0; } @@ -466,11 +474,30 @@ static int otx2_set_coalesce(struct net_device *netdev, { struct otx2_nic *pfvf = netdev_priv(netdev); struct otx2_hw *hw = &pfvf->hw; + u8 priv_coalesce_status; int qidx; if (!ec->rx_max_coalesced_frames || !ec->tx_max_coalesced_frames) return 0; + if (ec->use_adaptive_rx_coalesce != ec->use_adaptive_tx_coalesce) { + netdev_err(netdev, + "adaptive-rx should be same as adaptive-tx"); + return -EINVAL; + } + + /* Check and update coalesce status */ + if ((pfvf->flags & OTX2_FLAG_ADPTV_INT_COAL_ENABLED) == + OTX2_FLAG_ADPTV_INT_COAL_ENABLED) { + priv_coalesce_status = 1; + if (!ec->use_adaptive_rx_coalesce) + pfvf->flags &= ~OTX2_FLAG_ADPTV_INT_COAL_ENABLED; + } else { + priv_coalesce_status = 0; + if (ec->use_adaptive_rx_coalesce) + pfvf->flags |= OTX2_FLAG_ADPTV_INT_COAL_ENABLED; + } + /* 'cq_time_wait' is 8bit and is in multiple of 100ns, * so clamp the user given value to the range of 1 to 25usec. */ @@ -494,9 +521,9 @@ static int otx2_set_coalesce(struct net_device *netdev, * so clamp the user given value to the range of 1 to 64k. */ ec->rx_max_coalesced_frames = clamp_t(u32, ec->rx_max_coalesced_frames, - 1, U16_MAX); + 1, NAPI_POLL_WEIGHT); ec->tx_max_coalesced_frames = clamp_t(u32, ec->tx_max_coalesced_frames, - 1, U16_MAX); + 1, NAPI_POLL_WEIGHT); /* Rx and Tx are mapped to same CQ, check which one * is changed, if both then choose the min. @@ -509,6 +536,17 @@ static int otx2_set_coalesce(struct net_device *netdev, hw->cq_ecount_wait = min_t(u16, ec->rx_max_coalesced_frames, ec->tx_max_coalesced_frames); + /* Reset 'cq_time_wait' and 'cq_ecount_wait' to + * default values if coalesce status changed from + * 'on' to 'off'. + */ + if (priv_coalesce_status && + ((pfvf->flags & OTX2_FLAG_ADPTV_INT_COAL_ENABLED) != + OTX2_FLAG_ADPTV_INT_COAL_ENABLED)) { + hw->cq_time_wait = CQ_TIMER_THRESH_DEFAULT; + hw->cq_ecount_wait = CQ_CQE_THRESH_DEFAULT; + } + if (netif_running(netdev)) { for (qidx = 0; qidx < pfvf->hw.cint_cnt; qidx++) otx2_config_irq_coalescing(pfvf, qidx); @@ -1230,7 +1268,8 @@ end: static const struct ethtool_ops otx2_ethtool_ops = { .supported_coalesce_params = ETHTOOL_COALESCE_USECS | - ETHTOOL_COALESCE_MAX_FRAMES, + ETHTOOL_COALESCE_MAX_FRAMES | + ETHTOOL_COALESCE_USE_ADAPTIVE, .supported_ring_params = ETHTOOL_RING_USE_RX_BUF_LEN | ETHTOOL_RING_USE_CQE_SIZE, .get_link = otx2_get_link, diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c index e193ffb..fe3472e 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_pf.c @@ -1254,6 +1254,7 @@ static irqreturn_t otx2_cq_intr_handler(int irq, void *cq_irq) otx2_write64(pf, NIX_LF_CINTX_ENA_W1C(qidx), BIT_ULL(0)); /* Schedule NAPI */ + pf->napi_events++; napi_schedule_irqoff(&cq_poll->napi); return IRQ_HANDLED; @@ -1267,6 +1268,7 @@ static void otx2_disable_napi(struct otx2_nic *pf) for (qidx = 0; qidx < pf->hw.cint_cnt; qidx++) { cq_poll = &qset->napi[qidx]; + cancel_work_sync(&cq_poll->dim.work); napi_disable(&cq_poll->napi); netif_napi_del(&cq_poll->napi); } @@ -1546,6 +1548,24 @@ static void otx2_do_set_rx_mode(struct otx2_nic *pf) mutex_unlock(&pf->mbox.lock); } +static void otx2_dim_work(struct work_struct *w) +{ + struct dim_cq_moder cur_moder; + struct otx2_cq_poll *cq_poll; + struct otx2_nic *pfvf; + struct dim *dim; + + dim = container_of(w, struct dim, work); + cur_moder = net_dim_get_rx_moderation(dim->mode, dim->profile_ix); + cq_poll = container_of(dim, struct otx2_cq_poll, dim); + pfvf = (struct otx2_nic *)cq_poll->dev; + pfvf->hw.cq_time_wait = (cur_moder.usec > CQ_TIMER_THRESH_MAX) ? + CQ_TIMER_THRESH_MAX : cur_moder.usec; + pfvf->hw.cq_ecount_wait = (cur_moder.pkts > NAPI_POLL_WEIGHT) ? + NAPI_POLL_WEIGHT : cur_moder.pkts; + dim->state = DIM_START_MEASURE; +} + int otx2_open(struct net_device *netdev) { struct otx2_nic *pf = netdev_priv(netdev); @@ -1612,6 +1632,8 @@ int otx2_open(struct net_device *netdev) cq_poll->cq_ids[CQ_XDP] = CINT_INVALID_CQ; cq_poll->dev = (void *)pf; + cq_poll->dim.mode = DIM_CQ_PERIOD_MODE_START_FROM_CQE; + INIT_WORK(&cq_poll->dim.work, otx2_dim_work); netif_napi_add(netdev, &cq_poll->napi, otx2_napi_handler, NAPI_POLL_WEIGHT); napi_enable(&cq_poll->napi); diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c index c26de15..3baeafc 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.c @@ -484,6 +484,18 @@ process_cqe: return 0; } +static void otx2_adjust_adaptive_coalese(struct otx2_nic *pfvf, struct otx2_cq_poll *cq_poll) +{ + struct dim_sample dim_sample; + u64 rx_frames, rx_bytes; + + rx_frames = OTX2_GET_RX_STATS(RX_BCAST) + OTX2_GET_RX_STATS(RX_MCAST) + + OTX2_GET_RX_STATS(RX_UCAST); + rx_bytes = OTX2_GET_RX_STATS(RX_OCTS); + dim_update_sample(pfvf->napi_events, rx_frames, rx_bytes, &dim_sample); + net_dim(&cq_poll->dim, dim_sample); +} + int otx2_napi_handler(struct napi_struct *napi, int budget) { struct otx2_cq_queue *rx_cq = NULL; @@ -521,6 +533,17 @@ int otx2_napi_handler(struct napi_struct *napi, int budget) if (pfvf->flags & OTX2_FLAG_INTF_DOWN) return workdone; + /* Check for adaptive interrupt coalesce */ + if (workdone != 0 && + ((pfvf->flags & OTX2_FLAG_ADPTV_INT_COAL_ENABLED) == + OTX2_FLAG_ADPTV_INT_COAL_ENABLED)) { + /* Adjust irq coalese using net_dim */ + otx2_adjust_adaptive_coalese(pfvf, cq_poll); + /* Update irq coalescing */ + for (i = 0; i < pfvf->hw.cint_cnt; i++) + otx2_config_irq_coalescing(pfvf, i); + } + /* Re-enable interrupts */ otx2_write64(pfvf, NIX_LF_CINTX_ENA_W1S(cq_poll->cint_idx), BIT_ULL(0)); diff --git a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.h b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.h index f1a04cf..c88e8a4 100644 --- a/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.h +++ b/drivers/net/ethernet/marvell/octeontx2/nic/otx2_txrx.h @@ -109,6 +109,7 @@ struct otx2_cq_poll { #define CINT_INVALID_CQ 255 u8 cint_idx; u8 cq_ids[CQS_PER_CINT]; + struct dim dim; struct napi_struct napi; };