From: Stephan Gerhold Date: Wed, 6 Nov 2019 16:58:32 +0000 (+0100) Subject: drm/mcde: dsi: Delay start of video stream generator X-Git-Tag: v5.10.7~2352^2~6^2~897 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=6ddfb00d7d7aceded3409c83b0bd45f0d00785c1;p=platform%2Fkernel%2Flinux-rpi.git drm/mcde: dsi: Delay start of video stream generator The initialization order for DSI video mode is important - if we enable the video stream generator (VSG) before the MCDE DSI formatter starts sending pixel data, it will immediately run into an error and disable itself again. Avoid this problem by delaying the activation of the VSG until the MCDE DSI formatter is properly set up and running (i.e. when mcde_dsi_bridge_enable() is called). Signed-off-by: Stephan Gerhold Tested-by: Linus Walleij Reviewed-by: Linus Walleij Signed-off-by: Linus Walleij Link: https://patchwork.freedesktop.org/patch/msgid/20191106165835.2863-5-stephan@gerhold.net --- diff --git a/drivers/gpu/drm/mcde/mcde_dsi.c b/drivers/gpu/drm/mcde/mcde_dsi.c index c7956c9..4710f23 100644 --- a/drivers/gpu/drm/mcde/mcde_dsi.c +++ b/drivers/gpu/drm/mcde/mcde_dsi.c @@ -583,11 +583,6 @@ static void mcde_dsi_setup_video_mode(struct mcde_dsi *d, val |= DSI_VID_MODE_STS_CTL_ERR_MISSING_VSYNC; val |= DSI_VID_MODE_STS_CTL_ERR_MISSING_DATA; writel(val, d->regs + DSI_VID_MODE_STS_CTL); - - /* Enable video mode */ - val = readl(d->regs + DSI_MCTL_MAIN_DATA_CTL); - val |= DSI_MCTL_MAIN_DATA_CTL_VID_EN; - writel(val, d->regs + DSI_MCTL_MAIN_DATA_CTL); } static void mcde_dsi_start(struct mcde_dsi *d) @@ -699,6 +694,14 @@ static void mcde_dsi_start(struct mcde_dsi *d) static void mcde_dsi_bridge_enable(struct drm_bridge *bridge) { struct mcde_dsi *d = bridge_to_mcde_dsi(bridge); + u32 val; + + if (d->mdsi->mode_flags & MIPI_DSI_MODE_VIDEO) { + /* Enable video mode */ + val = readl(d->regs + DSI_MCTL_MAIN_DATA_CTL); + val |= DSI_MCTL_MAIN_DATA_CTL_VID_EN; + writel(val, d->regs + DSI_MCTL_MAIN_DATA_CTL); + } dev_info(d->dev, "enable DSI master\n"); };