From: Mike Rapoport Date: Tue, 14 Jul 2020 13:09:44 +0000 (+0100) Subject: ARM: 8993/1: remove it8152 PCI controller driver X-Git-Tag: v5.15~3193^2~4 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=6da5238fa384a3f0d5308b3b11e10f178cb7c20c;p=platform%2Fkernel%2Flinux-starfive.git ARM: 8993/1: remove it8152 PCI controller driver The it8152 PCI host controller was only used by cm-x2xx platforms. Since these platforms were removed, there is no point to keep it8152 driver. Acked-by: Arnd Bergmann Signed-off-by: Mike Rapoport Signed-off-by: Russell King --- diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 911f55a..910e89f 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1148,12 +1148,6 @@ config PCI_NANOENGINE help Enable PCI on the BSE nanoEngine board. -config PCI_HOST_ITE8152 - bool - depends on PCI && MACH_ARMCORE - default y - select DMABOUNCE - config ARM_ERRATA_814220 bool "ARM errata: Cache maintenance by set/way operations can execute out of order" depends on CPU_V7 diff --git a/arch/arm/common/Makefile b/arch/arm/common/Makefile index 219a260..8cd574b 100644 --- a/arch/arm/common/Makefile +++ b/arch/arm/common/Makefile @@ -12,7 +12,6 @@ obj-$(CONFIG_SHARP_LOCOMO) += locomo.o obj-$(CONFIG_SHARP_PARAM) += sharpsl_param.o obj-$(CONFIG_SHARP_SCOOP) += scoop.o obj-$(CONFIG_CPU_V7) += secure_cntvoff.o -obj-$(CONFIG_PCI_HOST_ITE8152) += it8152.o obj-$(CONFIG_MCPM) += mcpm_head.o mcpm_entry.o mcpm_platsmp.o vlock.o CFLAGS_REMOVE_mcpm_entry.o = -pg AFLAGS_mcpm_head.o := -march=armv7-a diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c deleted file mode 100644 index 9ec740c..0000000 --- a/arch/arm/common/it8152.c +++ /dev/null @@ -1,352 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0-only -/* - * linux/arch/arm/common/it8152.c - * - * Copyright Compulab Ltd, 2002-2007 - * Mike Rapoport - * - * The DMA bouncing part is taken from arch/arm/mach-ixp4xx/common-pci.c - * (see this file for respective copyrights) - * - * Thanks to Guennadi Liakhovetski for IRQ enumberation - * and demux code. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include -#include - -#define MAX_SLOTS 21 - -static void it8152_mask_irq(struct irq_data *d) -{ - unsigned int irq = d->irq; - - if (irq >= IT8152_LD_IRQ(0)) { - __raw_writel((__raw_readl(IT8152_INTC_LDCNIMR) | - (1 << (irq - IT8152_LD_IRQ(0)))), - IT8152_INTC_LDCNIMR); - } else if (irq >= IT8152_LP_IRQ(0)) { - __raw_writel((__raw_readl(IT8152_INTC_LPCNIMR) | - (1 << (irq - IT8152_LP_IRQ(0)))), - IT8152_INTC_LPCNIMR); - } else if (irq >= IT8152_PD_IRQ(0)) { - __raw_writel((__raw_readl(IT8152_INTC_PDCNIMR) | - (1 << (irq - IT8152_PD_IRQ(0)))), - IT8152_INTC_PDCNIMR); - } -} - -static void it8152_unmask_irq(struct irq_data *d) -{ - unsigned int irq = d->irq; - - if (irq >= IT8152_LD_IRQ(0)) { - __raw_writel((__raw_readl(IT8152_INTC_LDCNIMR) & - ~(1 << (irq - IT8152_LD_IRQ(0)))), - IT8152_INTC_LDCNIMR); - } else if (irq >= IT8152_LP_IRQ(0)) { - __raw_writel((__raw_readl(IT8152_INTC_LPCNIMR) & - ~(1 << (irq - IT8152_LP_IRQ(0)))), - IT8152_INTC_LPCNIMR); - } else if (irq >= IT8152_PD_IRQ(0)) { - __raw_writel((__raw_readl(IT8152_INTC_PDCNIMR) & - ~(1 << (irq - IT8152_PD_IRQ(0)))), - IT8152_INTC_PDCNIMR); - } -} - -static struct irq_chip it8152_irq_chip = { - .name = "it8152", - .irq_ack = it8152_mask_irq, - .irq_mask = it8152_mask_irq, - .irq_unmask = it8152_unmask_irq, -}; - -void it8152_init_irq(void) -{ - int irq; - - __raw_writel((0xffff), IT8152_INTC_PDCNIMR); - __raw_writel((0), IT8152_INTC_PDCNIRR); - __raw_writel((0xffff), IT8152_INTC_LPCNIMR); - __raw_writel((0), IT8152_INTC_LPCNIRR); - __raw_writel((0xffff), IT8152_INTC_LDCNIMR); - __raw_writel((0), IT8152_INTC_LDCNIRR); - - for (irq = IT8152_IRQ(0); irq <= IT8152_LAST_IRQ; irq++) { - irq_set_chip_and_handler(irq, &it8152_irq_chip, - handle_level_irq); - irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE); - } -} - -void it8152_irq_demux(struct irq_desc *desc) -{ - int bits_pd, bits_lp, bits_ld; - int i; - - while (1) { - /* Read all */ - bits_pd = __raw_readl(IT8152_INTC_PDCNIRR); - bits_lp = __raw_readl(IT8152_INTC_LPCNIRR); - bits_ld = __raw_readl(IT8152_INTC_LDCNIRR); - - /* Ack */ - __raw_writel((~bits_pd), IT8152_INTC_PDCNIRR); - __raw_writel((~bits_lp), IT8152_INTC_LPCNIRR); - __raw_writel((~bits_ld), IT8152_INTC_LDCNIRR); - - if (!(bits_ld | bits_lp | bits_pd)) { - /* Re-read to guarantee, that there was a moment of - time, when they all three were 0. */ - bits_pd = __raw_readl(IT8152_INTC_PDCNIRR); - bits_lp = __raw_readl(IT8152_INTC_LPCNIRR); - bits_ld = __raw_readl(IT8152_INTC_LDCNIRR); - if (!(bits_ld | bits_lp | bits_pd)) - return; - } - - bits_pd &= ((1 << IT8152_PD_IRQ_COUNT) - 1); - while (bits_pd) { - i = __ffs(bits_pd); - generic_handle_irq(IT8152_PD_IRQ(i)); - bits_pd &= ~(1 << i); - } - - bits_lp &= ((1 << IT8152_LP_IRQ_COUNT) - 1); - while (bits_lp) { - i = __ffs(bits_lp); - generic_handle_irq(IT8152_LP_IRQ(i)); - bits_lp &= ~(1 << i); - } - - bits_ld &= ((1 << IT8152_LD_IRQ_COUNT) - 1); - while (bits_ld) { - i = __ffs(bits_ld); - generic_handle_irq(IT8152_LD_IRQ(i)); - bits_ld &= ~(1 << i); - } - } -} - -/* mapping for on-chip devices */ -int __init it8152_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin) -{ - if ((dev->vendor == PCI_VENDOR_ID_ITE) && - (dev->device == PCI_DEVICE_ID_ITE_8152)) { - if ((dev->class >> 8) == PCI_CLASS_MULTIMEDIA_AUDIO) - return IT8152_AUDIO_INT; - if ((dev->class >> 8) == PCI_CLASS_SERIAL_USB) - return IT8152_USB_INT; - if ((dev->class >> 8) == PCI_CLASS_SYSTEM_DMA) - return IT8152_CDMA_INT; - } - - return 0; -} - -static unsigned long it8152_pci_dev_base_address(struct pci_bus *bus, - unsigned int devfn) -{ - unsigned long addr = 0; - - if (bus->number == 0) { - if (devfn < PCI_DEVFN(MAX_SLOTS, 0)) - addr = (devfn << 8); - } else - addr = (bus->number << 16) | (devfn << 8); - - return addr; -} - -static int it8152_pci_read_config(struct pci_bus *bus, - unsigned int devfn, int where, - int size, u32 *value) -{ - unsigned long addr = it8152_pci_dev_base_address(bus, devfn); - u32 v; - int shift; - - shift = (where & 3); - - __raw_writel((addr + where), IT8152_PCI_CFG_ADDR); - v = (__raw_readl(IT8152_PCI_CFG_DATA) >> (8 * (shift))); - - *value = v; - - return PCIBIOS_SUCCESSFUL; -} - -static int it8152_pci_write_config(struct pci_bus *bus, - unsigned int devfn, int where, - int size, u32 value) -{ - unsigned long addr = it8152_pci_dev_base_address(bus, devfn); - u32 v, vtemp, mask = 0; - int shift; - - if (size == 1) - mask = 0xff; - if (size == 2) - mask = 0xffff; - - shift = (where & 3); - - __raw_writel((addr + where), IT8152_PCI_CFG_ADDR); - vtemp = __raw_readl(IT8152_PCI_CFG_DATA); - - if (mask) - vtemp &= ~(mask << (8 * shift)); - else - vtemp = 0; - - v = (value << (8 * shift)); - __raw_writel((addr + where), IT8152_PCI_CFG_ADDR); - __raw_writel((v | vtemp), IT8152_PCI_CFG_DATA); - - return PCIBIOS_SUCCESSFUL; -} - -struct pci_ops it8152_ops = { - .read = it8152_pci_read_config, - .write = it8152_pci_write_config, -}; - -static struct resource it8152_io = { - .name = "IT8152 PCI I/O region", - .flags = IORESOURCE_IO, -}; - -static struct resource it8152_mem = { - .name = "IT8152 PCI memory region", - .start = 0x10000000, - .end = 0x13e00000, - .flags = IORESOURCE_MEM, -}; - -/* - * The following functions are needed for DMA bouncing. - * ITE8152 chip can address up to 64MByte, so all the devices - * connected to ITE8152 (PCI and USB) should have limited DMA window - */ -static int it8152_needs_bounce(struct device *dev, dma_addr_t dma_addr, size_t size) -{ - dev_dbg(dev, "%s: dma_addr %08x, size %08x\n", - __func__, dma_addr, size); - return (dma_addr + size - PHYS_OFFSET) >= SZ_64M; -} - -/* - * Setup DMA mask to 64MB on devices connected to ITE8152. Ignore all - * other devices. - */ -static int it8152_pci_platform_notify(struct device *dev) -{ - if (dev_is_pci(dev)) { - if (dev->dma_mask) - *dev->dma_mask = (SZ_64M - 1) | PHYS_OFFSET; - dev->coherent_dma_mask = (SZ_64M - 1) | PHYS_OFFSET; - dmabounce_register_dev(dev, 2048, 4096, it8152_needs_bounce); - } - return 0; -} - -static int it8152_pci_platform_notify_remove(struct device *dev) -{ - if (dev_is_pci(dev)) - dmabounce_unregister_dev(dev); - - return 0; -} - -int dma_set_coherent_mask(struct device *dev, u64 mask) -{ - if (mask >= PHYS_OFFSET + SZ_64M - 1) - return 0; - - return -EIO; -} - -int __init it8152_pci_setup(int nr, struct pci_sys_data *sys) -{ - /* - * FIXME: use pci_ioremap_io to remap the IO space here and - * move over to the generic io.h implementation. - * This requires solving the same problem for PXA PCMCIA - * support. - */ - it8152_io.start = (unsigned long)IT8152_IO_BASE + 0x12000; - it8152_io.end = (unsigned long)IT8152_IO_BASE + 0x12000 + 0x100000; - - sys->mem_offset = 0x10000000; - sys->io_offset = (unsigned long)IT8152_IO_BASE; - - if (request_resource(&ioport_resource, &it8152_io)) { - printk(KERN_ERR "PCI: unable to allocate IO region\n"); - goto err0; - } - if (request_resource(&iomem_resource, &it8152_mem)) { - printk(KERN_ERR "PCI: unable to allocate memory region\n"); - goto err1; - } - - pci_add_resource_offset(&sys->resources, &it8152_io, sys->io_offset); - pci_add_resource_offset(&sys->resources, &it8152_mem, sys->mem_offset); - - if (platform_notify || platform_notify_remove) { - printk(KERN_ERR "PCI: Can't use platform_notify\n"); - goto err2; - } - - platform_notify = it8152_pci_platform_notify; - platform_notify_remove = it8152_pci_platform_notify_remove; - - return 1; - -err2: - release_resource(&it8152_io); -err1: - release_resource(&it8152_mem); -err0: - return -EBUSY; -} - -/* ITE bridge requires setting latency timer to avoid early bus access - termination by PCI bus master devices -*/ -void pcibios_set_master(struct pci_dev *dev) -{ - u8 lat; - - /* no need to update on-chip OHCI controller */ - if ((dev->vendor == PCI_VENDOR_ID_ITE) && - (dev->device == PCI_DEVICE_ID_ITE_8152) && - ((dev->class >> 8) == PCI_CLASS_SERIAL_USB)) - return; - - pci_read_config_byte(dev, PCI_LATENCY_TIMER, &lat); - if (lat < 16) - lat = (64 <= pcibios_max_latency) ? 64 : pcibios_max_latency; - else if (lat > pcibios_max_latency) - lat = pcibios_max_latency; - else - return; - printk(KERN_DEBUG "PCI: Setting latency timer of device %s to %d\n", - pci_name(dev), lat); - pci_write_config_byte(dev, PCI_LATENCY_TIMER, lat); -} - - -EXPORT_SYMBOL(dma_set_coherent_mask); diff --git a/arch/arm/include/asm/hardware/it8152.h b/arch/arm/include/asm/hardware/it8152.h deleted file mode 100644 index e175c23..0000000 --- a/arch/arm/include/asm/hardware/it8152.h +++ /dev/null @@ -1,116 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0 */ -/* - * linux/include/arm/hardware/it8152.h - * - * Copyright Compulab Ltd., 2006,2007 - * Mike Rapoport - * - * ITE 8152 companion chip register definitions - */ - -#ifndef __ASM_HARDWARE_IT8152_H -#define __ASM_HARDWARE_IT8152_H - -#include - -extern void __iomem *it8152_base_address; - -#define IT8152_IO_BASE (it8152_base_address + 0x03e00000) -#define IT8152_CFGREG_BASE (it8152_base_address + 0x03f00000) - -#define __REG_IT8152(x) (it8152_base_address + (x)) - -#define IT8152_PCI_CFG_ADDR __REG_IT8152(0x3f00800) -#define IT8152_PCI_CFG_DATA __REG_IT8152(0x3f00804) - -#define IT8152_INTC_LDCNIRR __REG_IT8152(0x3f00300) -#define IT8152_INTC_LDPNIRR __REG_IT8152(0x3f00304) -#define IT8152_INTC_LDCNIMR __REG_IT8152(0x3f00308) -#define IT8152_INTC_LDPNIMR __REG_IT8152(0x3f0030C) -#define IT8152_INTC_LDNITR __REG_IT8152(0x3f00310) -#define IT8152_INTC_LDNIAR __REG_IT8152(0x3f00314) -#define IT8152_INTC_LPCNIRR __REG_IT8152(0x3f00320) -#define IT8152_INTC_LPPNIRR __REG_IT8152(0x3f00324) -#define IT8152_INTC_LPCNIMR __REG_IT8152(0x3f00328) -#define IT8152_INTC_LPPNIMR __REG_IT8152(0x3f0032C) -#define IT8152_INTC_LPNITR __REG_IT8152(0x3f00330) -#define IT8152_INTC_LPNIAR __REG_IT8152(0x3f00334) -#define IT8152_INTC_PDCNIRR __REG_IT8152(0x3f00340) -#define IT8152_INTC_PDPNIRR __REG_IT8152(0x3f00344) -#define IT8152_INTC_PDCNIMR __REG_IT8152(0x3f00348) -#define IT8152_INTC_PDPNIMR __REG_IT8152(0x3f0034C) -#define IT8152_INTC_PDNITR __REG_IT8152(0x3f00350) -#define IT8152_INTC_PDNIAR __REG_IT8152(0x3f00354) -#define IT8152_INTC_INTC_TYPER __REG_IT8152(0x3f003FC) - -#define IT8152_GPIO_GPDR __REG_IT8152(0x3f00500) - -/* - Interrupt controller per register summary: - --------------------------------------- - LCDNIRR: - IT8152_LD_IRQ(8) PCICLK stop - IT8152_LD_IRQ(7) MCLK ready - IT8152_LD_IRQ(6) s/w - IT8152_LD_IRQ(5) UART - IT8152_LD_IRQ(4) GPIO - IT8152_LD_IRQ(3) TIMER 4 - IT8152_LD_IRQ(2) TIMER 3 - IT8152_LD_IRQ(1) TIMER 2 - IT8152_LD_IRQ(0) TIMER 1 - - LPCNIRR: - IT8152_LP_IRQ(x) serial IRQ x - - PCIDNIRR: - IT8152_PD_IRQ(14) PCISERR - IT8152_PD_IRQ(13) CPU/PCI bridge target abort (h2pTADR) - IT8152_PD_IRQ(12) CPU/PCI bridge master abort (h2pMADR) - IT8152_PD_IRQ(11) PCI INTD - IT8152_PD_IRQ(10) PCI INTC - IT8152_PD_IRQ(9) PCI INTB - IT8152_PD_IRQ(8) PCI INTA - IT8152_PD_IRQ(7) serial INTD - IT8152_PD_IRQ(6) serial INTC - IT8152_PD_IRQ(5) serial INTB - IT8152_PD_IRQ(4) serial INTA - IT8152_PD_IRQ(3) serial IRQ IOCHK (IOCHKR) - IT8152_PD_IRQ(2) chaining DMA (CDMAR) - IT8152_PD_IRQ(1) USB (USBR) - IT8152_PD_IRQ(0) Audio controller (ACR) - */ -#define IT8152_IRQ(x) (IRQ_BOARD_START + (x)) -#define IT8152_LAST_IRQ (IRQ_BOARD_START + 40) - -/* IRQ-sources in 3 groups - local devices, LPC (serial), and external PCI */ -#define IT8152_LD_IRQ_COUNT 9 -#define IT8152_LP_IRQ_COUNT 16 -#define IT8152_PD_IRQ_COUNT 15 - -/* Priorities: */ -#define IT8152_PD_IRQ(i) IT8152_IRQ(i) -#define IT8152_LP_IRQ(i) (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT) -#define IT8152_LD_IRQ(i) (IT8152_IRQ(i) + IT8152_PD_IRQ_COUNT + IT8152_LP_IRQ_COUNT) - -/* frequently used interrupts */ -#define IT8152_PCISERR IT8152_PD_IRQ(14) -#define IT8152_H2PTADR IT8152_PD_IRQ(13) -#define IT8152_H2PMAR IT8152_PD_IRQ(12) -#define IT8152_PCI_INTD IT8152_PD_IRQ(11) -#define IT8152_PCI_INTC IT8152_PD_IRQ(10) -#define IT8152_PCI_INTB IT8152_PD_IRQ(9) -#define IT8152_PCI_INTA IT8152_PD_IRQ(8) -#define IT8152_CDMA_INT IT8152_PD_IRQ(2) -#define IT8152_USB_INT IT8152_PD_IRQ(1) -#define IT8152_AUDIO_INT IT8152_PD_IRQ(0) - -struct pci_dev; -struct pci_sys_data; - -extern void it8152_irq_demux(struct irq_desc *desc); -extern void it8152_init_irq(void); -extern int it8152_pci_map_irq(const struct pci_dev *dev, u8 slot, u8 pin); -extern int it8152_pci_setup(int nr, struct pci_sys_data *sys); -extern struct pci_ops it8152_ops; - -#endif /* __ASM_HARDWARE_IT8152_H */ diff --git a/arch/arm/kernel/bios32.c b/arch/arm/kernel/bios32.c index ed46ca6..eecec16 100644 --- a/arch/arm/kernel/bios32.c +++ b/arch/arm/kernel/bios32.c @@ -252,23 +252,6 @@ static void pci_fixup_cy82c693(struct pci_dev *dev) } DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_CONTAQ, PCI_DEVICE_ID_CONTAQ_82C693, pci_fixup_cy82c693); -static void pci_fixup_it8152(struct pci_dev *dev) -{ - int i; - /* fixup for ITE 8152 devices */ - /* FIXME: add defines for class 0x68000 and 0x80103 */ - if ((dev->class >> 8) == PCI_CLASS_BRIDGE_HOST || - dev->class == 0x68000 || - dev->class == 0x80103) { - for (i = 0; i < PCI_NUM_RESOURCES; i++) { - dev->resource[i].start = 0; - dev->resource[i].end = 0; - dev->resource[i].flags = 0; - } - } -} -DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ITE, PCI_DEVICE_ID_ITE_8152, pci_fixup_it8152); - /* * If the bus contains any of these devices, then we must not turn on * parity checking of any kind. Currently this is CyberPro 20x0 only.