From: Yaniv Rosner Date: Mon, 31 Jan 2011 04:22:20 +0000 (+0000) Subject: bnx2x: Add and change some net_dev messages X-Git-Tag: upstream/snapshot3+hdmi~11215^2~437 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=6d870c391ec0e4da4fd75df7e6aca7252162c408;p=platform%2Fadaptation%2Frenesas_rcar%2Frenesas_kernel.git bnx2x: Add and change some net_dev messages Add and modify some net dev prints to improve error control Signed-off-by: Yaniv Rosner Signed-off-by: Eilon Greenstein Signed-off-by: David S. Miller --- diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c index 452e262..187387e 100644 --- a/drivers/net/bnx2x/bnx2x_link.c +++ b/drivers/net/bnx2x/bnx2x_link.c @@ -1422,6 +1422,7 @@ static u8 bnx2x_cl45_write(struct bnx2x *bp, struct bnx2x_phy *phy, } if (tmp & EMAC_MDIO_COMM_START_BUSY) { DP(NETIF_MSG_LINK, "write phy register failed\n"); + netdev_err(bp->dev, "MDC/MDIO access timeout\n"); rc = -EFAULT; } else { /* data */ @@ -1442,6 +1443,7 @@ static u8 bnx2x_cl45_write(struct bnx2x *bp, struct bnx2x_phy *phy, } if (tmp & EMAC_MDIO_COMM_START_BUSY) { DP(NETIF_MSG_LINK, "write phy register failed\n"); + netdev_err(bp->dev, "MDC/MDIO access timeout\n"); rc = -EFAULT; } } @@ -1489,7 +1491,7 @@ static u8 bnx2x_cl45_read(struct bnx2x *bp, struct bnx2x_phy *phy, } if (val & EMAC_MDIO_COMM_START_BUSY) { DP(NETIF_MSG_LINK, "read phy register failed\n"); - + netdev_err(bp->dev, "MDC/MDIO access timeout\n"); *ret_val = 0; rc = -EFAULT; @@ -1512,7 +1514,7 @@ static u8 bnx2x_cl45_read(struct bnx2x *bp, struct bnx2x_phy *phy, } if (val & EMAC_MDIO_COMM_START_BUSY) { DP(NETIF_MSG_LINK, "read phy register failed\n"); - + netdev_err(bp->dev, "MDC/MDIO access timeout\n"); *ret_val = 0; rc = -EFAULT; } @@ -1827,6 +1829,9 @@ static u8 bnx2x_reset_unicore(struct link_params *params, } } + netdev_err(bp->dev, "Warning: PHY was not initialized," + " Port %d\n", + params->port); DP(NETIF_MSG_LINK, "BUG! XGXS is still in reset!\n"); return -EINVAL; @@ -2846,7 +2851,8 @@ static u8 bnx2x_init_xgxs(struct bnx2x_phy *phy, } static u16 bnx2x_wait_reset_complete(struct bnx2x *bp, - struct bnx2x_phy *phy) + struct bnx2x_phy *phy, + struct link_params *params) { u16 cnt, ctrl; /* Wait for soft reset to get cleared upto 1 sec */ @@ -2857,6 +2863,11 @@ static u16 bnx2x_wait_reset_complete(struct bnx2x *bp, break; msleep(1); } + + if (cnt == 1000) + netdev_err(bp->dev, "Warning: PHY was not initialized," + " Port %d\n", + params->port); DP(NETIF_MSG_LINK, "control reg 0x%x (after %d ms)\n", ctrl, cnt); return cnt; } @@ -4402,7 +4413,7 @@ static u8 bnx2x_8705_config_init(struct bnx2x_phy *phy, /* HW reset */ bnx2x_ext_phy_hw_reset(bp, params->port); bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0xa040); - bnx2x_wait_reset_complete(bp, phy); + bnx2x_wait_reset_complete(bp, phy, params); bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_MISC_CTRL, 0x8288); @@ -4797,9 +4808,9 @@ static u8 bnx2x_verify_sfp_module(struct bnx2x_phy *phy, else vendor_pn[SFP_EEPROM_PART_NO_SIZE] = '\0'; - netdev_info(bp->dev, "Warning: Unqualified SFP+ module detected," - " Port %d from %s part number %s\n", - params->port, vendor_name, vendor_pn); + netdev_err(bp->dev, "Warning: Unqualified SFP+ module detected," + " Port %d from %s part number %s\n", + params->port, vendor_name, vendor_pn); phy->flags |= FLAGS_SFP_NOT_APPROVED; return -EINVAL; } @@ -5142,7 +5153,7 @@ static u8 bnx2x_8706_config_init(struct bnx2x_phy *phy, /* HW reset */ bnx2x_ext_phy_hw_reset(bp, params->port); bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 0xa040); - bnx2x_wait_reset_complete(bp, phy); + bnx2x_wait_reset_complete(bp, phy, params); /* Wait until fw is loaded */ for (cnt = 0; cnt < 100; cnt++) { @@ -5305,7 +5316,7 @@ static u8 bnx2x_8726_config_init(struct bnx2x_phy *phy, MISC_REGISTERS_GPIO_OUTPUT_HIGH, params->port); bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 1<<15); - bnx2x_wait_reset_complete(bp, phy); + bnx2x_wait_reset_complete(bp, phy, params); bnx2x_8726_external_rom_boot(phy, params); @@ -5495,7 +5506,7 @@ static u8 bnx2x_8727_config_init(struct bnx2x_phy *phy, struct bnx2x *bp = params->bp; /* Enable PMD link, MOD_ABS_FLT, and 1G link alarm */ - bnx2x_wait_reset_complete(bp, phy); + bnx2x_wait_reset_complete(bp, phy, params); rx_alarm_ctrl_val = (1<<2) | (1<<5) ; lasi_ctrl_val = 0x0004; @@ -6117,7 +6128,7 @@ static u8 bnx2x_8481_config_init(struct bnx2x_phy *phy, /* HW reset */ bnx2x_ext_phy_hw_reset(bp, params->port); - bnx2x_wait_reset_complete(bp, phy); + bnx2x_wait_reset_complete(bp, phy, params); bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_CTRL, 1<<15); return bnx2x_848xx_cmn_config_init(phy, params, vars); @@ -6144,7 +6155,7 @@ static u8 bnx2x_848x3_config_init(struct bnx2x_phy *phy, bnx2x_set_gpio(bp, MISC_REGISTERS_GPIO_3, MISC_REGISTERS_GPIO_OUTPUT_HIGH, port); - bnx2x_wait_reset_complete(bp, phy); + bnx2x_wait_reset_complete(bp, phy, params); /* Wait for GPHY to come out of reset */ msleep(50); /* @@ -6544,7 +6555,7 @@ static u8 bnx2x_7101_config_init(struct bnx2x_phy *phy, MISC_REGISTERS_GPIO_OUTPUT_HIGH, params->port); /* HW reset */ bnx2x_ext_phy_hw_reset(bp, params->port); - bnx2x_wait_reset_complete(bp, phy); + bnx2x_wait_reset_complete(bp, phy, params); bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_LASI_CTRL, 0x1); @@ -8000,6 +8011,10 @@ static u8 bnx2x_ext_phy_common_init(struct bnx2x *bp, u32 shmem_base_path[], break; } + if (rc != 0) + netdev_err(bp->dev, "Warning: PHY was not initialized," + " Port %d\n", + 0); return rc; }