From: Yadwinder Singh Brar Date: Tue, 16 Oct 2012 11:54:18 +0000 (+0530) Subject: regulator: max77686: Use already set opmode while re-enabling regulators. X-Git-Tag: v3.8-rc1~129^2~16^2~2 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=6d2c896b72322ccca465b57123e66890ebddb0ab;p=platform%2Fupstream%2Fkernel-adaptation-pc.git regulator: max77686: Use already set opmode while re-enabling regulators. This patch adds basic support to take care of opmode(if any) which can be set by set_suspend_[disable/mode] callbacks. Signed-off-by: Yadwinder Singh Brar Signed-off-by: Mark Brown --- diff --git a/drivers/regulator/max77686.c b/drivers/regulator/max77686.c index 2a67d08..20dae7b 100644 --- a/drivers/regulator/max77686.c +++ b/drivers/regulator/max77686.c @@ -67,8 +67,18 @@ enum max77686_ramp_rate { struct max77686_data { struct regulator_dev *rdev[MAX77686_REGULATORS]; + unsigned int opmode[MAX77686_REGULATORS]; }; +int max77686_enable(struct regulator_dev *rdev) +{ + struct max77686_data *max77686 = rdev_get_drvdata(rdev); + + return regmap_update_bits(rdev->regmap, rdev->desc->enable_reg, + rdev->desc->enable_mask, + max77686->opmode[rdev->desc->id]); +} + static int max77686_set_ramp_delay(struct regulator_dev *rdev, int ramp_delay) { unsigned int ramp_value = RAMP_RATE_NO_CTRL; @@ -98,7 +108,7 @@ static struct regulator_ops max77686_ops = { .list_voltage = regulator_list_voltage_linear, .map_voltage = regulator_map_voltage_linear, .is_enabled = regulator_is_enabled_regmap, - .enable = regulator_enable_regmap, + .enable = max77686_enable, .disable = regulator_disable_regmap, .get_voltage_sel = regulator_get_voltage_sel_regmap, .set_voltage_sel = regulator_set_voltage_sel_regmap, @@ -109,7 +119,7 @@ static struct regulator_ops max77686_buck_dvs_ops = { .list_voltage = regulator_list_voltage_linear, .map_voltage = regulator_map_voltage_linear, .is_enabled = regulator_is_enabled_regmap, - .enable = regulator_enable_regmap, + .enable = max77686_enable, .disable = regulator_disable_regmap, .get_voltage_sel = regulator_get_voltage_sel_regmap, .set_voltage_sel = regulator_set_voltage_sel_regmap, @@ -314,12 +324,14 @@ static __devinit int max77686_pmic_probe(struct platform_device *pdev) config.dev = &pdev->dev; config.regmap = iodev->regmap; + config.driver_data = max77686; platform_set_drvdata(pdev, max77686); for (i = 0; i < MAX77686_REGULATORS; i++) { config.init_data = pdata->regulators[i].initdata; config.of_node = pdata->regulators[i].of_node; + max77686->opmode[i] = regulators[i].enable_mask; max77686->rdev[i] = regulator_register(®ulators[i], &config); if (IS_ERR(max77686->rdev[i])) { ret = PTR_ERR(max77686->rdev[i]);