From: Marco Franchi <marco.franchi@nxp.com>
Date: Wed, 8 Jun 2016 18:05:31 +0000 (-0300)
Subject: mx6sabresd: Allow LVDS backlight to be functional after a kernel reboot
X-Git-Tag: v2016.07-rc2~16^2~7
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=6c51a3644e233bce171c19cec9cec77a77beada7;p=platform%2Fkernel%2Fu-boot.git

mx6sabresd: Allow LVDS backlight to be functional after a kernel reboot

Currently the LVDS backlight does not work in U-Boot after a “reboot” comand
in the kernel.

This problem occurs because the kernel uses this pin in PWM mode and U-Boot
does not configure the backlight pin as GPIO functionality.

So fix the problem by explicitly configuring the backlight pin as GPIO in
U-Boot.

Signed-off-by: Marco Franchi <marco.franchi@nxp.com>
Acked-by: Stefano Babic <sbabic@denx.de>
Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
---

diff --git a/board/freescale/mx6sabresd/mx6sabresd.c b/board/freescale/mx6sabresd/mx6sabresd.c
index 54ba36b..0cf6809 100644
--- a/board/freescale/mx6sabresd/mx6sabresd.c
+++ b/board/freescale/mx6sabresd/mx6sabresd.c
@@ -177,13 +177,27 @@ static iomux_v3_cfg_t const rgb_pads[] = {
 	MX6_PAD_DISP0_DAT21__IPU1_DISP0_DATA21 | MUX_PAD_CTRL(NO_PAD_CTRL),
 	MX6_PAD_DISP0_DAT22__IPU1_DISP0_DATA22 | MUX_PAD_CTRL(NO_PAD_CTRL),
 	MX6_PAD_DISP0_DAT23__IPU1_DISP0_DATA23 | MUX_PAD_CTRL(NO_PAD_CTRL),
+};
+
+static iomux_v3_cfg_t const bl_pads[] = {
 	MX6_PAD_SD1_DAT3__GPIO1_IO21 | MUX_PAD_CTRL(NO_PAD_CTRL),
 };
 
+static void enable_backlight(void)
+{
+	imx_iomux_v3_setup_multiple_pads(bl_pads, ARRAY_SIZE(bl_pads));
+	gpio_direction_output(DISP0_PWR_EN, 1);
+}
+
 static void enable_rgb(struct display_info_t const *dev)
 {
 	imx_iomux_v3_setup_multiple_pads(rgb_pads, ARRAY_SIZE(rgb_pads));
-	gpio_direction_output(DISP0_PWR_EN, 1);
+	enable_backlight();
+}
+
+static void enable_lvds(struct display_info_t const *dev)
+{
+	enable_backlight();
 }
 
 static struct i2c_pads_info i2c_pad_info1 = {
@@ -370,7 +384,7 @@ struct display_info_t const displays[] = {{
 	.addr	= 0,
 	.pixfmt	= IPU_PIX_FMT_RGB666,
 	.detect	= NULL,
-	.enable	= NULL,
+	.enable	= enable_lvds,
 	.mode	= {
 		.name           = "Hannstar-XGA",
 		.refresh        = 60,