From: Yun Zhou <yun.zhou@windriver.com>
Date: Thu, 17 Feb 2022 14:12:34 +0000 (+0800)
Subject: spi: use specific last_cs instead of last_cs_enable
X-Git-Tag: v6.1-rc5~1800^2~23
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=6bb477df04366e0f69dd2f49e1ae1099069326bc;p=platform%2Fkernel%2Flinux-starfive.git

spi: use specific last_cs instead of last_cs_enable

Commit d40f0b6f2e21 instroduced last_cs_enable to avoid setting
chipselect if it's not necessary, but it also introduces a bug. The
chipselect may not be set correctly on multi-device SPI busses. The
reason is that we can't judge the chipselect by bool last_cs_enable,
since chipselect may be modified after other devices were accessed.

So we should record the specific state of chipselect in case of
confusion.

Signed-off-by: Yun Zhou <yun.zhou@windriver.com>
Link: https://lore.kernel.org/r/20220217141234.72737-1-yun.zhou@windriver.com
Signed-off-by: Mark Brown <broonie@kernel.org>
---

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index cd4dc31..6326e59 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -926,13 +926,14 @@ static void spi_set_cs(struct spi_device *spi, bool enable, bool force)
 	 * Avoid calling into the driver (or doing delays) if the chip select
 	 * isn't actually changing from the last time this was called.
 	 */
-	if (!force && (spi->controller->last_cs_enable == enable) &&
+	if (!force && ((enable && spi->controller->last_cs == spi->chip_select) ||
+				(!enable && spi->controller->last_cs != spi->chip_select)) &&
 	    (spi->controller->last_cs_mode_high == (spi->mode & SPI_CS_HIGH)))
 		return;
 
 	trace_spi_set_cs(spi, activate);
 
-	spi->controller->last_cs_enable = enable;
+	spi->controller->last_cs = enable ? spi->chip_select : -1;
 	spi->controller->last_cs_mode_high = spi->mode & SPI_CS_HIGH;
 
 	if ((spi->cs_gpiod || !spi->controller->set_cs_timing) && !activate) {
@@ -3016,6 +3017,9 @@ int spi_register_controller(struct spi_controller *ctlr)
 		goto free_bus_id;
 	}
 
+	/* setting last_cs to -1 means no chip selected */
+	ctlr->last_cs = -1;
+
 	status = device_add(&ctlr->dev);
 	if (status < 0)
 		goto free_bus_id;
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index 579d71c..7d005fa 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -370,7 +370,8 @@ extern struct spi_device *spi_new_ancillary_device(struct spi_device *spi, u8 ch
  * @cur_msg_prepared: spi_prepare_message was called for the currently
  *                    in-flight message
  * @cur_msg_mapped: message has been mapped for DMA
- * @last_cs_enable: was enable true on the last call to set_cs.
+ * @last_cs: the last chip_select that is recorded by set_cs, -1 on non chip
+ *           selected
  * @last_cs_mode_high: was (mode & SPI_CS_HIGH) true on the last call to set_cs.
  * @xfer_completion: used by core transfer_one_message()
  * @busy: message pump is busy
@@ -603,7 +604,7 @@ struct spi_controller {
 	bool				auto_runtime_pm;
 	bool                            cur_msg_prepared;
 	bool				cur_msg_mapped;
-	bool				last_cs_enable;
+	char				last_cs;
 	bool				last_cs_mode_high;
 	bool                            fallback;
 	struct completion               xfer_completion;