From: Masahiro Yamada Date: Mon, 27 Jun 2016 10:31:05 +0000 (+0900) Subject: arm64: add better and more generic spin-table support X-Git-Tag: v2016.09-rc1~139 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=6b6024eadb96bc471643bd183fe940fb657bef83;p=platform%2Fkernel%2Fu-boot.git arm64: add better and more generic spin-table support There are two enable methods supported by ARM64 Linux; psci and spin-table. The latter is simpler and helpful for quick SoC bring up. My main motivation for this patch is to improve the spin-table support, which allows us to boot an ARMv8 system without the ARM Trusted Firmware. Currently, we have multi-entry code in arch/arm/cpu/armv8/start.S and the spin-table is supported in a really ad-hoc way, and I see some problems: - We must hard-code CPU_RELEASE_ADDR so that it matches the "cpu-release-addr" property in the DT that comes from the kernel tree. - The Documentation/arm64/booting.txt in Linux requires that the release address must be zero-initialized, but it is not cared by the common code in U-Boot. We must do it in a board function. - There is no systematic way to protect the spin-table code from the kernel. We are supposed to do it in a board specific manner, but it is difficult to predict where the spin-table code will be located after the relocation. So, it also makes difficult to hard-code /memreserve/ in the DT of the kernel. So, here is a patch to solve those problems; the DT is run-time modified to reserve the spin-table code (+ cpu-release-addr). Also, the "cpu-release-addr" property is set to an appropriate address after the relocation, which means we no longer need the hard-coded CPU_RELEASE_ADDR. Signed-off-by: Masahiro Yamada --- diff --git a/arch/arm/cpu/armv8/Kconfig b/arch/arm/cpu/armv8/Kconfig index 3d19bbf..acf2460 100644 --- a/arch/arm/cpu/armv8/Kconfig +++ b/arch/arm/cpu/armv8/Kconfig @@ -3,4 +3,22 @@ if ARM64 config ARMV8_MULTIENTRY boolean "Enable multiple CPUs to enter into U-Boot" +config ARMV8_SPIN_TABLE + bool "Support spin-table enable method" + depends on ARMV8_MULTIENTRY && OF_LIBFDT + help + Say Y here to support "spin-table" enable method for booting Linux. + + To use this feature, you must do: + - Specify enable-method = "spin-table" in each CPU node in the + Device Tree you are using to boot the kernel + - Let secondary CPUs in U-Boot (in a board specific manner) + before the master CPU jumps to the kernel + + U-Boot automatically does: + - Set "cpu-release-addr" property of each CPU node + (overwrites it if already exists). + - Reserve the code for the spin-table and the release address + via a /memreserve/ region in the Device Tree. + endif diff --git a/arch/arm/cpu/armv8/Makefile b/arch/arm/cpu/armv8/Makefile index bf8644c..f6eb9f4 100644 --- a/arch/arm/cpu/armv8/Makefile +++ b/arch/arm/cpu/armv8/Makefile @@ -15,6 +15,9 @@ obj-y += cache.o obj-y += tlb.o obj-y += transition.o obj-y += fwcall.o +ifndef CONFIG_SPL_BUILD +obj-$(CONFIG_ARMV8_SPIN_TABLE) += spin_table.o spin_table_v8.o +endif obj-$(CONFIG_FSL_LAYERSCAPE) += fsl-layerscape/ obj-$(CONFIG_S32V234) += s32v234/ diff --git a/arch/arm/cpu/armv8/spin_table.c b/arch/arm/cpu/armv8/spin_table.c new file mode 100644 index 0000000..ec1c9b8 --- /dev/null +++ b/arch/arm/cpu/armv8/spin_table.c @@ -0,0 +1,63 @@ +/* + * Copyright (C) 2016 Socionext Inc. + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include +#include +#include + +int spin_table_update_dt(void *fdt) +{ + int cpus_offset, offset; + const char *prop; + int ret; + unsigned long rsv_addr = (unsigned long)&spin_table_reserve_begin; + unsigned long rsv_size = &spin_table_reserve_end - + &spin_table_reserve_begin; + + cpus_offset = fdt_path_offset(fdt, "/cpus"); + if (cpus_offset < 0) + return -ENODEV; + + for (offset = fdt_first_subnode(fdt, cpus_offset); + offset >= 0; + offset = fdt_next_subnode(fdt, offset)) { + prop = fdt_getprop(fdt, offset, "device_type", NULL); + if (!prop || strcmp(prop, "cpu")) + continue; + + /* + * In the first loop, we check if every CPU node specifies + * spin-table. Otherwise, just return successfully to not + * disturb other methods, like psci. + */ + prop = fdt_getprop(fdt, offset, "enable-method", NULL); + if (!prop || strcmp(prop, "spin-table")) + return 0; + } + + for (offset = fdt_first_subnode(fdt, cpus_offset); + offset >= 0; + offset = fdt_next_subnode(fdt, offset)) { + prop = fdt_getprop(fdt, offset, "device_type", NULL); + if (!prop || strcmp(prop, "cpu")) + continue; + + ret = fdt_setprop_u64(fdt, offset, "cpu-release-addr", + (unsigned long)&spin_table_cpu_release_addr); + if (ret) + return -ENOSPC; + } + + ret = fdt_add_mem_rsv(fdt, rsv_addr, rsv_size); + if (ret) + return -ENOSPC; + + printf(" Reserved memory region for spin-table: addr=%lx size=%lx\n", + rsv_addr, rsv_size); + + return 0; +} diff --git a/arch/arm/cpu/armv8/spin_table_v8.S b/arch/arm/cpu/armv8/spin_table_v8.S new file mode 100644 index 0000000..d7f78a6 --- /dev/null +++ b/arch/arm/cpu/armv8/spin_table_v8.S @@ -0,0 +1,23 @@ +/* + * Copyright (C) 2016 Socionext Inc. + * Author: Masahiro Yamada + * + * SPDX-License-Identifier: GPL-2.0+ + */ + +#include + +ENTRY(spin_table_secondary_jump) +.globl spin_table_reserve_begin +spin_table_reserve_begin: +0: wfe + ldr x0, spin_table_cpu_release_addr + cbz x0, 0b + br x0 +.globl spin_table_cpu_release_addr + .align 3 +spin_table_cpu_release_addr: + .quad 0 +.globl spin_table_reserve_end +spin_table_reserve_end: +ENDPROC(spin_table_secondary_jump) diff --git a/arch/arm/cpu/armv8/start.S b/arch/arm/cpu/armv8/start.S index 670e323..67edf94 100644 --- a/arch/arm/cpu/armv8/start.S +++ b/arch/arm/cpu/armv8/start.S @@ -94,7 +94,11 @@ reset: /* Processor specific initialization */ bl lowlevel_init -#ifdef CONFIG_ARMV8_MULTIENTRY +#if CONFIG_IS_ENABLED(ARMV8_SPIN_TABLE) + branch_if_master x0, x1, master_cpu + b spin_table_secondary_jump + /* never return */ +#elif defined(CONFIG_ARMV8_MULTIENTRY) branch_if_master x0, x1, master_cpu /* @@ -106,10 +110,8 @@ slave_cpu: ldr x0, [x1] cbz x0, slave_cpu br x0 /* branch to the given address */ -master_cpu: - /* On the master CPU */ #endif /* CONFIG_ARMV8_MULTIENTRY */ - +master_cpu: bl _main #ifdef CONFIG_SYS_RESET_SCTRL diff --git a/arch/arm/include/asm/spin_table.h b/arch/arm/include/asm/spin_table.h new file mode 100644 index 0000000..8b57539 --- /dev/null +++ b/arch/arm/include/asm/spin_table.h @@ -0,0 +1,14 @@ +/* + * SPDX-License-Identifier: GPL-2.0+ + */ + +#ifndef __ASM_SPIN_TABLE_H__ +#define __ASM_SPIN_TABLE_H__ + +extern u64 spin_table_cpu_release_addr; +extern char spin_table_reserve_begin; +extern char spin_table_reserve_end; + +int spin_table_update_dt(void *fdt); + +#endif /* __ASM_SPIN_TABLE_H__ */ diff --git a/arch/arm/lib/bootm-fdt.c b/arch/arm/lib/bootm-fdt.c index 76b75d8..2c0b56a 100644 --- a/arch/arm/lib/bootm-fdt.c +++ b/arch/arm/lib/bootm-fdt.c @@ -21,6 +21,7 @@ #include #endif #include +#include DECLARE_GLOBAL_DATA_PTR; @@ -45,6 +46,12 @@ int arch_fixup_fdt(void *blob) if (ret) return ret; +#ifdef CONFIG_ARMV8_SPIN_TABLE + ret = spin_table_update_dt(blob); + if (ret) + return ret; +#endif + #ifdef CONFIG_ARMV7_NONSEC ret = psci_update_dt(blob); if (ret)