From: Jaehyun Kim Date: Thu, 9 Sep 2021 09:07:45 +0000 (+0900) Subject: Add support of bpf X-Git-Tag: accepted/tizen/unified/20210916.005908^0 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=69a8bbb906b96b0a7925b04a8e33102a653ecf3a;hp=602168cfe92ab4eeadf13d03748e705e801faa58;p=platform%2Fupstream%2Fconnman.git Add support of bpf Change-Id: Iaa5566a1be143ede38832cdd8639111fc26b4586 Signed-off-by: Jaehyun Kim --- diff --git a/COPYING.LGPLv2 b/COPYING.LGPLv2 new file mode 100644 index 0000000..4362b49 --- /dev/null +++ b/COPYING.LGPLv2 @@ -0,0 +1,502 @@ + GNU LESSER GENERAL PUBLIC LICENSE + Version 2.1, February 1999 + + Copyright (C) 1991, 1999 Free Software Foundation, Inc. + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + Everyone is permitted to copy and distribute verbatim copies + of this license document, but changing it is not allowed. + +[This is the first released version of the Lesser GPL. It also counts + as the successor of the GNU Library Public License, version 2, hence + the version number 2.1.] + + Preamble + + The licenses for most software are designed to take away your +freedom to share and change it. By contrast, the GNU General Public +Licenses are intended to guarantee your freedom to share and change +free software--to make sure the software is free for all its users. + + This license, the Lesser General Public License, applies to some +specially designated software packages--typically libraries--of the +Free Software Foundation and other authors who decide to use it. You +can use it too, but we suggest you first think carefully about whether +this license or the ordinary General Public License is the better +strategy to use in any particular case, based on the explanations below. + + When we speak of free software, we are referring to freedom of use, +not price. Our General Public Licenses are designed to make sure that +you have the freedom to distribute copies of free software (and charge +for this service if you wish); that you receive source code or can get +it if you want it; that you can change the software and use pieces of +it in new free programs; and that you are informed that you can do +these things. + + To protect your rights, we need to make restrictions that forbid +distributors to deny you these rights or to ask you to surrender these +rights. These restrictions translate to certain responsibilities for +you if you distribute copies of the library or if you modify it. + + For example, if you distribute copies of the library, whether gratis +or for a fee, you must give the recipients all the rights that we gave +you. You must make sure that they, too, receive or can get the source +code. If you link other code with the library, you must provide +complete object files to the recipients, so that they can relink them +with the library after making changes to the library and recompiling +it. And you must show them these terms so they know their rights. + + We protect your rights with a two-step method: (1) we copyright the +library, and (2) we offer you this license, which gives you legal +permission to copy, distribute and/or modify the library. + + To protect each distributor, we want to make it very clear that +there is no warranty for the free library. Also, if the library is +modified by someone else and passed on, the recipients should know +that what they have is not the original version, so that the original +author's reputation will not be affected by problems that might be +introduced by others. + + Finally, software patents pose a constant threat to the existence of +any free program. We wish to make sure that a company cannot +effectively restrict the users of a free program by obtaining a +restrictive license from a patent holder. Therefore, we insist that +any patent license obtained for a version of the library must be +consistent with the full freedom of use specified in this license. + + Most GNU software, including some libraries, is covered by the +ordinary GNU General Public License. This license, the GNU Lesser +General Public License, applies to certain designated libraries, and +is quite different from the ordinary General Public License. We use +this license for certain libraries in order to permit linking those +libraries into non-free programs. + + When a program is linked with a library, whether statically or using +a shared library, the combination of the two is legally speaking a +combined work, a derivative of the original library. The ordinary +General Public License therefore permits such linking only if the +entire combination fits its criteria of freedom. The Lesser General +Public License permits more lax criteria for linking other code with +the library. + + We call this license the "Lesser" General Public License because it +does Less to protect the user's freedom than the ordinary General +Public License. It also provides other free software developers Less +of an advantage over competing non-free programs. These disadvantages +are the reason we use the ordinary General Public License for many +libraries. However, the Lesser license provides advantages in certain +special circumstances. + + For example, on rare occasions, there may be a special need to +encourage the widest possible use of a certain library, so that it becomes +a de-facto standard. To achieve this, non-free programs must be +allowed to use the library. A more frequent case is that a free +library does the same job as widely used non-free libraries. In this +case, there is little to gain by limiting the free library to free +software only, so we use the Lesser General Public License. + + In other cases, permission to use a particular library in non-free +programs enables a greater number of people to use a large body of +free software. For example, permission to use the GNU C Library in +non-free programs enables many more people to use the whole GNU +operating system, as well as its variant, the GNU/Linux operating +system. + + Although the Lesser General Public License is Less protective of the +users' freedom, it does ensure that the user of a program that is +linked with the Library has the freedom and the wherewithal to run +that program using a modified version of the Library. + + The precise terms and conditions for copying, distribution and +modification follow. Pay close attention to the difference between a +"work based on the library" and a "work that uses the library". The +former contains code derived from the library, whereas the latter must +be combined with the library in order to run. + + GNU LESSER GENERAL PUBLIC LICENSE + TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION + + 0. This License Agreement applies to any software library or other +program which contains a notice placed by the copyright holder or +other authorized party saying it may be distributed under the terms of +this Lesser General Public License (also called "this License"). +Each licensee is addressed as "you". + + A "library" means a collection of software functions and/or data +prepared so as to be conveniently linked with application programs +(which use some of those functions and data) to form executables. + + The "Library", below, refers to any such software library or work +which has been distributed under these terms. A "work based on the +Library" means either the Library or any derivative work under +copyright law: that is to say, a work containing the Library or a +portion of it, either verbatim or with modifications and/or translated +straightforwardly into another language. (Hereinafter, translation is +included without limitation in the term "modification".) + + "Source code" for a work means the preferred form of the work for +making modifications to it. For a library, complete source code means +all the source code for all modules it contains, plus any associated +interface definition files, plus the scripts used to control compilation +and installation of the library. + + Activities other than copying, distribution and modification are not +covered by this License; they are outside its scope. The act of +running a program using the Library is not restricted, and output from +such a program is covered only if its contents constitute a work based +on the Library (independent of the use of the Library in a tool for +writing it). Whether that is true depends on what the Library does +and what the program that uses the Library does. + + 1. You may copy and distribute verbatim copies of the Library's +complete source code as you receive it, in any medium, provided that +you conspicuously and appropriately publish on each copy an +appropriate copyright notice and disclaimer of warranty; keep intact +all the notices that refer to this License and to the absence of any +warranty; and distribute a copy of this License along with the +Library. + + You may charge a fee for the physical act of transferring a copy, +and you may at your option offer warranty protection in exchange for a +fee. + + 2. You may modify your copy or copies of the Library or any portion +of it, thus forming a work based on the Library, and copy and +distribute such modifications or work under the terms of Section 1 +above, provided that you also meet all of these conditions: + + a) The modified work must itself be a software library. + + b) You must cause the files modified to carry prominent notices + stating that you changed the files and the date of any change. + + c) You must cause the whole of the work to be licensed at no + charge to all third parties under the terms of this License. + + d) If a facility in the modified Library refers to a function or a + table of data to be supplied by an application program that uses + the facility, other than as an argument passed when the facility + is invoked, then you must make a good faith effort to ensure that, + in the event an application does not supply such function or + table, the facility still operates, and performs whatever part of + its purpose remains meaningful. + + (For example, a function in a library to compute square roots has + a purpose that is entirely well-defined independent of the + application. Therefore, Subsection 2d requires that any + application-supplied function or table used by this function must + be optional: if the application does not supply it, the square + root function must still compute square roots.) + +These requirements apply to the modified work as a whole. If +identifiable sections of that work are not derived from the Library, +and can be reasonably considered independent and separate works in +themselves, then this License, and its terms, do not apply to those +sections when you distribute them as separate works. But when you +distribute the same sections as part of a whole which is a work based +on the Library, the distribution of the whole must be on the terms of +this License, whose permissions for other licensees extend to the +entire whole, and thus to each and every part regardless of who wrote +it. + +Thus, it is not the intent of this section to claim rights or contest +your rights to work written entirely by you; rather, the intent is to +exercise the right to control the distribution of derivative or +collective works based on the Library. + +In addition, mere aggregation of another work not based on the Library +with the Library (or with a work based on the Library) on a volume of +a storage or distribution medium does not bring the other work under +the scope of this License. + + 3. You may opt to apply the terms of the ordinary GNU General Public +License instead of this License to a given copy of the Library. To do +this, you must alter all the notices that refer to this License, so +that they refer to the ordinary GNU General Public License, version 2, +instead of to this License. (If a newer version than version 2 of the +ordinary GNU General Public License has appeared, then you can specify +that version instead if you wish.) Do not make any other change in +these notices. + + Once this change is made in a given copy, it is irreversible for +that copy, so the ordinary GNU General Public License applies to all +subsequent copies and derivative works made from that copy. + + This option is useful when you wish to copy part of the code of +the Library into a program that is not a library. + + 4. You may copy and distribute the Library (or a portion or +derivative of it, under Section 2) in object code or executable form +under the terms of Sections 1 and 2 above provided that you accompany +it with the complete corresponding machine-readable source code, which +must be distributed under the terms of Sections 1 and 2 above on a +medium customarily used for software interchange. + + If distribution of object code is made by offering access to copy +from a designated place, then offering equivalent access to copy the +source code from the same place satisfies the requirement to +distribute the source code, even though third parties are not +compelled to copy the source along with the object code. + + 5. A program that contains no derivative of any portion of the +Library, but is designed to work with the Library by being compiled or +linked with it, is called a "work that uses the Library". Such a +work, in isolation, is not a derivative work of the Library, and +therefore falls outside the scope of this License. + + However, linking a "work that uses the Library" with the Library +creates an executable that is a derivative of the Library (because it +contains portions of the Library), rather than a "work that uses the +library". The executable is therefore covered by this License. +Section 6 states terms for distribution of such executables. + + When a "work that uses the Library" uses material from a header file +that is part of the Library, the object code for the work may be a +derivative work of the Library even though the source code is not. +Whether this is true is especially significant if the work can be +linked without the Library, or if the work is itself a library. The +threshold for this to be true is not precisely defined by law. + + If such an object file uses only numerical parameters, data +structure layouts and accessors, and small macros and small inline +functions (ten lines or less in length), then the use of the object +file is unrestricted, regardless of whether it is legally a derivative +work. (Executables containing this object code plus portions of the +Library will still fall under Section 6.) + + Otherwise, if the work is a derivative of the Library, you may +distribute the object code for the work under the terms of Section 6. +Any executables containing that work also fall under Section 6, +whether or not they are linked directly with the Library itself. + + 6. As an exception to the Sections above, you may also combine or +link a "work that uses the Library" with the Library to produce a +work containing portions of the Library, and distribute that work +under terms of your choice, provided that the terms permit +modification of the work for the customer's own use and reverse +engineering for debugging such modifications. + + You must give prominent notice with each copy of the work that the +Library is used in it and that the Library and its use are covered by +this License. You must supply a copy of this License. If the work +during execution displays copyright notices, you must include the +copyright notice for the Library among them, as well as a reference +directing the user to the copy of this License. Also, you must do one +of these things: + + a) Accompany the work with the complete corresponding + machine-readable source code for the Library including whatever + changes were used in the work (which must be distributed under + Sections 1 and 2 above); and, if the work is an executable linked + with the Library, with the complete machine-readable "work that + uses the Library", as object code and/or source code, so that the + user can modify the Library and then relink to produce a modified + executable containing the modified Library. (It is understood + that the user who changes the contents of definitions files in the + Library will not necessarily be able to recompile the application + to use the modified definitions.) + + b) Use a suitable shared library mechanism for linking with the + Library. A suitable mechanism is one that (1) uses at run time a + copy of the library already present on the user's computer system, + rather than copying library functions into the executable, and (2) + will operate properly with a modified version of the library, if + the user installs one, as long as the modified version is + interface-compatible with the version that the work was made with. + + c) Accompany the work with a written offer, valid for at + least three years, to give the same user the materials + specified in Subsection 6a, above, for a charge no more + than the cost of performing this distribution. + + d) If distribution of the work is made by offering access to copy + from a designated place, offer equivalent access to copy the above + specified materials from the same place. + + e) Verify that the user has already received a copy of these + materials or that you have already sent this user a copy. + + For an executable, the required form of the "work that uses the +Library" must include any data and utility programs needed for +reproducing the executable from it. However, as a special exception, +the materials to be distributed need not include anything that is +normally distributed (in either source or binary form) with the major +components (compiler, kernel, and so on) of the operating system on +which the executable runs, unless that component itself accompanies +the executable. + + It may happen that this requirement contradicts the license +restrictions of other proprietary libraries that do not normally +accompany the operating system. Such a contradiction means you cannot +use both them and the Library together in an executable that you +distribute. + + 7. You may place library facilities that are a work based on the +Library side-by-side in a single library together with other library +facilities not covered by this License, and distribute such a combined +library, provided that the separate distribution of the work based on +the Library and of the other library facilities is otherwise +permitted, and provided that you do these two things: + + a) Accompany the combined library with a copy of the same work + based on the Library, uncombined with any other library + facilities. This must be distributed under the terms of the + Sections above. + + b) Give prominent notice with the combined library of the fact + that part of it is a work based on the Library, and explaining + where to find the accompanying uncombined form of the same work. + + 8. You may not copy, modify, sublicense, link with, or distribute +the Library except as expressly provided under this License. Any +attempt otherwise to copy, modify, sublicense, link with, or +distribute the Library is void, and will automatically terminate your +rights under this License. However, parties who have received copies, +or rights, from you under this License will not have their licenses +terminated so long as such parties remain in full compliance. + + 9. You are not required to accept this License, since you have not +signed it. However, nothing else grants you permission to modify or +distribute the Library or its derivative works. These actions are +prohibited by law if you do not accept this License. Therefore, by +modifying or distributing the Library (or any work based on the +Library), you indicate your acceptance of this License to do so, and +all its terms and conditions for copying, distributing or modifying +the Library or works based on it. + + 10. Each time you redistribute the Library (or any work based on the +Library), the recipient automatically receives a license from the +original licensor to copy, distribute, link with or modify the Library +subject to these terms and conditions. You may not impose any further +restrictions on the recipients' exercise of the rights granted herein. +You are not responsible for enforcing compliance by third parties with +this License. + + 11. If, as a consequence of a court judgment or allegation of patent +infringement or for any other reason (not limited to patent issues), +conditions are imposed on you (whether by court order, agreement or +otherwise) that contradict the conditions of this License, they do not +excuse you from the conditions of this License. If you cannot +distribute so as to satisfy simultaneously your obligations under this +License and any other pertinent obligations, then as a consequence you +may not distribute the Library at all. For example, if a patent +license would not permit royalty-free redistribution of the Library by +all those who receive copies directly or indirectly through you, then +the only way you could satisfy both it and this License would be to +refrain entirely from distribution of the Library. + +If any portion of this section is held invalid or unenforceable under any +particular circumstance, the balance of the section is intended to apply, +and the section as a whole is intended to apply in other circumstances. + +It is not the purpose of this section to induce you to infringe any +patents or other property right claims or to contest validity of any +such claims; this section has the sole purpose of protecting the +integrity of the free software distribution system which is +implemented by public license practices. Many people have made +generous contributions to the wide range of software distributed +through that system in reliance on consistent application of that +system; it is up to the author/donor to decide if he or she is willing +to distribute software through any other system and a licensee cannot +impose that choice. + +This section is intended to make thoroughly clear what is believed to +be a consequence of the rest of this License. + + 12. If the distribution and/or use of the Library is restricted in +certain countries either by patents or by copyrighted interfaces, the +original copyright holder who places the Library under this License may add +an explicit geographical distribution limitation excluding those countries, +so that distribution is permitted only in or among countries not thus +excluded. In such case, this License incorporates the limitation as if +written in the body of this License. + + 13. The Free Software Foundation may publish revised and/or new +versions of the Lesser General Public License from time to time. +Such new versions will be similar in spirit to the present version, +but may differ in detail to address new problems or concerns. + +Each version is given a distinguishing version number. If the Library +specifies a version number of this License which applies to it and +"any later version", you have the option of following the terms and +conditions either of that version or of any later version published by +the Free Software Foundation. If the Library does not specify a +license version number, you may choose any version ever published by +the Free Software Foundation. + + 14. If you wish to incorporate parts of the Library into other free +programs whose distribution conditions are incompatible with these, +write to the author to ask for permission. For software which is +copyrighted by the Free Software Foundation, write to the Free +Software Foundation; we sometimes make exceptions for this. Our +decision will be guided by the two goals of preserving the free status +of all derivatives of our free software and of promoting the sharing +and reuse of software generally. + + NO WARRANTY + + 15. BECAUSE THE LIBRARY IS LICENSED FREE OF CHARGE, THERE IS NO +WARRANTY FOR THE LIBRARY, TO THE EXTENT PERMITTED BY APPLICABLE LAW. +EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR +OTHER PARTIES PROVIDE THE LIBRARY "AS IS" WITHOUT WARRANTY OF ANY +KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE +IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR +PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE +LIBRARY IS WITH YOU. SHOULD THE LIBRARY PROVE DEFECTIVE, YOU ASSUME +THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. + + 16. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN +WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY +AND/OR REDISTRIBUTE THE LIBRARY AS PERMITTED ABOVE, BE LIABLE TO YOU +FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR +CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE +LIBRARY (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING +RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A +FAILURE OF THE LIBRARY TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF +SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH +DAMAGES. + + END OF TERMS AND CONDITIONS + + How to Apply These Terms to Your New Libraries + + If you develop a new library, and you want it to be of the greatest +possible use to the public, we recommend making it free software that +everyone can redistribute and change. You can do so by permitting +redistribution under these terms (or, alternatively, under the terms of the +ordinary General Public License). + + To apply these terms, attach the following notices to the library. It is +safest to attach them to the start of each source file to most effectively +convey the exclusion of warranty; and each file should have at least the +"copyright" line and a pointer to where the full notice is found. + + + Copyright (C) + + This library is free software; you can redistribute it and/or + modify it under the terms of the GNU Lesser General Public + License as published by the Free Software Foundation; either + version 2.1 of the License, or (at your option) any later version. + + This library is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + Lesser General Public License for more details. + + You should have received a copy of the GNU Lesser General Public + License along with this library; if not, write to the Free Software + Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA + +Also add information on how to contact you by electronic and paper mail. + +You should also get your employer (if you work as a programmer) or your +school, if any, to sign a "copyright disclaimer" for the library, if +necessary. Here is a sample; alter the names: + + Yoyodyne, Inc., hereby disclaims all copyright interest in the + library `Frob' (a library for tweaking knobs) written by James Random Hacker. + + , 1 April 1990 + Ty Coon, President of Vice + +That's all there is to it! diff --git a/packaging/connman.spec b/packaging/connman.spec index 1a77426..31dcc3e 100644 --- a/packaging/connman.spec +++ b/packaging/connman.spec @@ -1,12 +1,12 @@ %bcond_with connman_openconnect -%bcond_without connman_wireguard +%bcond_without connman_wireguard %bcond_without connman_openvpn %bcond_without connman_ipsec %bcond_without connman_vpnd Name: connman Version: 1.38 -Release: 9 +Release: 10 License: GPL-2.0+ Summary: Connection Manager Url: http://connman.net @@ -111,7 +111,7 @@ Requires: python-xml Scripts for testing Connman and its functionality %package devel -Summary: Development Files for connman +Summary: Development files for connman Group: Development/Tools Requires: %{name} = %{version} @@ -147,6 +147,22 @@ Conflicts: %{name}-extension-ivi Connman without ethernet support This overwrites conf file of %{name}. +%package extension-bpf +Summary: Files for BPF support +Requires: libelf0 +Requires: %{name} = %{version}-%{release} +%description extension-bpf +Files for BPF support + +%package extension-bpf-devel +License: GPL-2.0+ and LGPL-2.1+ +Summary: Development files for BPF support +Requires: %{name} = %{version}-%{release} +Requires: %{name}-extension-bpf +%description extension-bpf-devel +Header files and development files for BPF support + + %prep %setup -q @@ -231,6 +247,17 @@ cp src/connman.conf %{buildroot}%{_sysconfdir}/dbus-1/system.d/ cp vpn/vpn-dbus.conf %{buildroot}%{_sysconfdir}/dbus-1/system.d/connman-vpn-dbus.conf %endif +# BPF file +mkdir -p %{buildroot}/%{_includedir}/bpf +cp -rf resources/usr/include/bpf/* %{buildroot}/%{_includedir}/bpf +cp resources/var/lib/connman/bpf_code %{buildroot}/%{_localstatedir}/lib/connman/bpf_code + +%ifarch aarch64 +cp resources/usr/lib/libbpf.so.64 %{buildroot}/%{_libdir}/libbpf.so.0.2.0 +%else +cp resources/usr/lib/libbpf.so.32 %{buildroot}/%{_libdir}/libbpf.so.0.2.0 +%endif + %post #chsmack -a 'System' /%{_localstatedir}/lib/connman #chsmack -a 'System' /%{_localstatedir}/lib/connman/settings @@ -246,7 +273,6 @@ systemctl daemon-reload %manifest connman.manifest %attr(500,network_fw,network_fw) %{_bindir}/connmand %attr(500,network_fw,network_fw) %{_bindir}/connmanctl -%attr(755,network_fw,network_fw) /%{_localstatedir}/lib/connman %attr(600,network_fw,network_fw) /%{_localstatedir}/lib/connman/settings %attr(644,root,root) %{_datadir}/dbus-1/system-services/net.connman.service %attr(644,root,root) %{_sysconfdir}/dbus-1/system.d/* @@ -314,17 +340,37 @@ systemctl daemon-reload %post extension-tv mv -f %{_unitdir}/connman.service.tv %{_unitdir}/connman.service mv -f %{_sysconfdir}/connman/main.conf.tv %{_sysconfdir}/connman/main.conf + %files extension-tv %attr(644,network_fw,network_fw) %{_sysconfdir}/connman/main.conf.tv %license COPYING %attr(644,root,root) %{_unitdir}/connman.service.tv + %post extension-ivi mv -f %{_sysconfdir}/connman/main.conf.ivi %{_sysconfdir}/connman/main.conf + %files extension-ivi %attr(644,network_fw,network_fw) %{_sysconfdir}/connman/main.conf.ivi %license COPYING + %post extension-disable-eth mv -f %{_sysconfdir}/connman/main.conf.disable.eth %{_sysconfdir}/connman/main.conf + %files extension-disable-eth %attr(644,network_fw,network_fw) %{_sysconfdir}/connman/main.conf.disable.eth %license COPYING + +%files extension-bpf +%manifest %{name}.manifest +%attr(755,root,root) %{_libdir}/libbpf.so.0.2.0 +%attr(640,network_fw,network_fw) %{_localstatedir}/lib/connman/bpf_code + +%post extension-bpf +ln -s %{_libdir}/libbpf.so.0.2.0 %{_libdir}/libbpf.so.0 +ln -s %{_libdir}/libbpf.so.0.2.0 %{_libdir}/libbpf.so + +%files extension-bpf-devel +%manifest %{name}.manifest +%{_includedir}/bpf/* +%license COPYING +%license COPYING.LGPLv2 diff --git a/resources/usr/include/bpf/bpf.h b/resources/usr/include/bpf/bpf.h new file mode 100644 index 0000000..875dde2 --- /dev/null +++ b/resources/usr/include/bpf/bpf.h @@ -0,0 +1,285 @@ +/* SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause) */ + +/* + * common eBPF ELF operations. + * + * Copyright (C) 2013-2015 Alexei Starovoitov + * Copyright (C) 2015 Wang Nan + * Copyright (C) 2015 Huawei Inc. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU Lesser General Public + * License as published by the Free Software Foundation; + * version 2.1 of the License (not later!) + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU Lesser General Public License for more details. + * + * You should have received a copy of the GNU Lesser General Public + * License along with this program; if not, see + */ +#ifndef __LIBBPF_BPF_H +#define __LIBBPF_BPF_H + +#include +#include +#include +#include + +#include "libbpf_common.h" + +#ifdef __cplusplus +extern "C" { +#endif + +struct bpf_create_map_attr { + const char *name; + enum bpf_map_type map_type; + __u32 map_flags; + __u32 key_size; + __u32 value_size; + __u32 max_entries; + __u32 numa_node; + __u32 btf_fd; + __u32 btf_key_type_id; + __u32 btf_value_type_id; + __u32 map_ifindex; + union { + __u32 inner_map_fd; + __u32 btf_vmlinux_value_type_id; + }; +}; + +LIBBPF_API int +bpf_create_map_xattr(const struct bpf_create_map_attr *create_attr); +LIBBPF_API int bpf_create_map_node(enum bpf_map_type map_type, const char *name, + int key_size, int value_size, + int max_entries, __u32 map_flags, int node); +LIBBPF_API int bpf_create_map_name(enum bpf_map_type map_type, const char *name, + int key_size, int value_size, + int max_entries, __u32 map_flags); +LIBBPF_API int bpf_create_map(enum bpf_map_type map_type, int key_size, + int value_size, int max_entries, __u32 map_flags); +LIBBPF_API int bpf_create_map_in_map_node(enum bpf_map_type map_type, + const char *name, int key_size, + int inner_map_fd, int max_entries, + __u32 map_flags, int node); +LIBBPF_API int bpf_create_map_in_map(enum bpf_map_type map_type, + const char *name, int key_size, + int inner_map_fd, int max_entries, + __u32 map_flags); + +struct bpf_load_program_attr { + enum bpf_prog_type prog_type; + enum bpf_attach_type expected_attach_type; + const char *name; + const struct bpf_insn *insns; + size_t insns_cnt; + const char *license; + union { + __u32 kern_version; + __u32 attach_prog_fd; + }; + union { + __u32 prog_ifindex; + __u32 attach_btf_id; + }; + __u32 prog_btf_fd; + __u32 func_info_rec_size; + const void *func_info; + __u32 func_info_cnt; + __u32 line_info_rec_size; + const void *line_info; + __u32 line_info_cnt; + __u32 log_level; + __u32 prog_flags; +}; + +/* Flags to direct loading requirements */ +#define MAPS_RELAX_COMPAT 0x01 + +/* Recommend log buffer size */ +#define BPF_LOG_BUF_SIZE (UINT32_MAX >> 8) /* verifier maximum in kernels <= 5.1 */ +LIBBPF_API int +bpf_load_program_xattr(const struct bpf_load_program_attr *load_attr, + char *log_buf, size_t log_buf_sz); +LIBBPF_API int bpf_load_program(enum bpf_prog_type type, + const struct bpf_insn *insns, size_t insns_cnt, + const char *license, __u32 kern_version, + char *log_buf, size_t log_buf_sz); +LIBBPF_API int bpf_verify_program(enum bpf_prog_type type, + const struct bpf_insn *insns, + size_t insns_cnt, __u32 prog_flags, + const char *license, __u32 kern_version, + char *log_buf, size_t log_buf_sz, + int log_level); + +LIBBPF_API int bpf_map_update_elem(int fd, const void *key, const void *value, + __u64 flags); + +LIBBPF_API int bpf_map_lookup_elem(int fd, const void *key, void *value); +LIBBPF_API int bpf_map_lookup_elem_flags(int fd, const void *key, void *value, + __u64 flags); +LIBBPF_API int bpf_map_lookup_and_delete_elem(int fd, const void *key, + void *value); +LIBBPF_API int bpf_map_delete_elem(int fd, const void *key); +LIBBPF_API int bpf_map_get_next_key(int fd, const void *key, void *next_key); +LIBBPF_API int bpf_map_freeze(int fd); + +struct bpf_map_batch_opts { + size_t sz; /* size of this struct for forward/backward compatibility */ + __u64 elem_flags; + __u64 flags; +}; +#define bpf_map_batch_opts__last_field flags + +LIBBPF_API int bpf_map_delete_batch(int fd, void *keys, + __u32 *count, + const struct bpf_map_batch_opts *opts); +LIBBPF_API int bpf_map_lookup_batch(int fd, void *in_batch, void *out_batch, + void *keys, void *values, __u32 *count, + const struct bpf_map_batch_opts *opts); +LIBBPF_API int bpf_map_lookup_and_delete_batch(int fd, void *in_batch, + void *out_batch, void *keys, + void *values, __u32 *count, + const struct bpf_map_batch_opts *opts); +LIBBPF_API int bpf_map_update_batch(int fd, void *keys, void *values, + __u32 *count, + const struct bpf_map_batch_opts *opts); + +LIBBPF_API int bpf_obj_pin(int fd, const char *pathname); +LIBBPF_API int bpf_obj_get(const char *pathname); + +struct bpf_prog_attach_opts { + size_t sz; /* size of this struct for forward/backward compatibility */ + unsigned int flags; + int replace_prog_fd; +}; +#define bpf_prog_attach_opts__last_field replace_prog_fd + +LIBBPF_API int bpf_prog_attach(int prog_fd, int attachable_fd, + enum bpf_attach_type type, unsigned int flags); +LIBBPF_API int bpf_prog_attach_xattr(int prog_fd, int attachable_fd, + enum bpf_attach_type type, + const struct bpf_prog_attach_opts *opts); +LIBBPF_API int bpf_prog_detach(int attachable_fd, enum bpf_attach_type type); +LIBBPF_API int bpf_prog_detach2(int prog_fd, int attachable_fd, + enum bpf_attach_type type); + +union bpf_iter_link_info; /* defined in up-to-date linux/bpf.h */ +struct bpf_link_create_opts { + size_t sz; /* size of this struct for forward/backward compatibility */ + __u32 flags; + union bpf_iter_link_info *iter_info; + __u32 iter_info_len; + __u32 target_btf_id; +}; +#define bpf_link_create_opts__last_field target_btf_id + +LIBBPF_API int bpf_link_create(int prog_fd, int target_fd, + enum bpf_attach_type attach_type, + const struct bpf_link_create_opts *opts); + +LIBBPF_API int bpf_link_detach(int link_fd); + +struct bpf_link_update_opts { + size_t sz; /* size of this struct for forward/backward compatibility */ + __u32 flags; /* extra flags */ + __u32 old_prog_fd; /* expected old program FD */ +}; +#define bpf_link_update_opts__last_field old_prog_fd + +LIBBPF_API int bpf_link_update(int link_fd, int new_prog_fd, + const struct bpf_link_update_opts *opts); + +LIBBPF_API int bpf_iter_create(int link_fd); + +struct bpf_prog_test_run_attr { + int prog_fd; + int repeat; + const void *data_in; + __u32 data_size_in; + void *data_out; /* optional */ + __u32 data_size_out; /* in: max length of data_out + * out: length of data_out */ + __u32 retval; /* out: return code of the BPF program */ + __u32 duration; /* out: average per repetition in ns */ + const void *ctx_in; /* optional */ + __u32 ctx_size_in; + void *ctx_out; /* optional */ + __u32 ctx_size_out; /* in: max length of ctx_out + * out: length of cxt_out */ +}; + +LIBBPF_API int bpf_prog_test_run_xattr(struct bpf_prog_test_run_attr *test_attr); + +/* + * bpf_prog_test_run does not check that data_out is large enough. Consider + * using bpf_prog_test_run_xattr instead. + */ +LIBBPF_API int bpf_prog_test_run(int prog_fd, int repeat, void *data, + __u32 size, void *data_out, __u32 *size_out, + __u32 *retval, __u32 *duration); +LIBBPF_API int bpf_prog_get_next_id(__u32 start_id, __u32 *next_id); +LIBBPF_API int bpf_map_get_next_id(__u32 start_id, __u32 *next_id); +LIBBPF_API int bpf_btf_get_next_id(__u32 start_id, __u32 *next_id); +LIBBPF_API int bpf_link_get_next_id(__u32 start_id, __u32 *next_id); +LIBBPF_API int bpf_prog_get_fd_by_id(__u32 id); +LIBBPF_API int bpf_map_get_fd_by_id(__u32 id); +LIBBPF_API int bpf_btf_get_fd_by_id(__u32 id); +LIBBPF_API int bpf_link_get_fd_by_id(__u32 id); +LIBBPF_API int bpf_obj_get_info_by_fd(int bpf_fd, void *info, __u32 *info_len); +LIBBPF_API int bpf_prog_query(int target_fd, enum bpf_attach_type type, + __u32 query_flags, __u32 *attach_flags, + __u32 *prog_ids, __u32 *prog_cnt); +LIBBPF_API int bpf_raw_tracepoint_open(const char *name, int prog_fd); +LIBBPF_API int bpf_load_btf(const void *btf, __u32 btf_size, char *log_buf, + __u32 log_buf_size, bool do_log); +LIBBPF_API int bpf_task_fd_query(int pid, int fd, __u32 flags, char *buf, + __u32 *buf_len, __u32 *prog_id, __u32 *fd_type, + __u64 *probe_offset, __u64 *probe_addr); + +enum bpf_stats_type; /* defined in up-to-date linux/bpf.h */ +LIBBPF_API int bpf_enable_stats(enum bpf_stats_type type); + +struct bpf_prog_bind_opts { + size_t sz; /* size of this struct for forward/backward compatibility */ + __u32 flags; +}; +#define bpf_prog_bind_opts__last_field flags + +LIBBPF_API int bpf_prog_bind_map(int prog_fd, int map_fd, + const struct bpf_prog_bind_opts *opts); + +struct bpf_test_run_opts { + size_t sz; /* size of this struct for forward/backward compatibility */ + const void *data_in; /* optional */ + void *data_out; /* optional */ + __u32 data_size_in; + __u32 data_size_out; /* in: max length of data_out + * out: length of data_out + */ + const void *ctx_in; /* optional */ + void *ctx_out; /* optional */ + __u32 ctx_size_in; + __u32 ctx_size_out; /* in: max length of ctx_out + * out: length of cxt_out + */ + __u32 retval; /* out: return code of the BPF program */ + int repeat; + __u32 duration; /* out: average per repetition in ns */ + __u32 flags; + __u32 cpu; +}; +#define bpf_test_run_opts__last_field cpu + +LIBBPF_API int bpf_prog_test_run_opts(int prog_fd, + struct bpf_test_run_opts *opts); + +#ifdef __cplusplus +} /* extern "C" */ +#endif + +#endif /* __LIBBPF_BPF_H */ diff --git a/resources/usr/include/bpf/libbpf.h b/resources/usr/include/bpf/libbpf.h new file mode 100644 index 0000000..6909ee8 --- /dev/null +++ b/resources/usr/include/bpf/libbpf.h @@ -0,0 +1,765 @@ +/* SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause) */ + +/* + * Common eBPF ELF object loading operations. + * + * Copyright (C) 2013-2015 Alexei Starovoitov + * Copyright (C) 2015 Wang Nan + * Copyright (C) 2015 Huawei Inc. + */ +#ifndef __LIBBPF_LIBBPF_H +#define __LIBBPF_LIBBPF_H + +#include +#include +#include +#include +#include // for size_t +#include + +#include "libbpf_common.h" + +#ifdef __cplusplus +extern "C" { +#endif + +enum libbpf_errno { + __LIBBPF_ERRNO__START = 4000, + + /* Something wrong in libelf */ + LIBBPF_ERRNO__LIBELF = __LIBBPF_ERRNO__START, + LIBBPF_ERRNO__FORMAT, /* BPF object format invalid */ + LIBBPF_ERRNO__KVERSION, /* Incorrect or no 'version' section */ + LIBBPF_ERRNO__ENDIAN, /* Endian mismatch */ + LIBBPF_ERRNO__INTERNAL, /* Internal error in libbpf */ + LIBBPF_ERRNO__RELOC, /* Relocation failed */ + LIBBPF_ERRNO__LOAD, /* Load program failure for unknown reason */ + LIBBPF_ERRNO__VERIFY, /* Kernel verifier blocks program loading */ + LIBBPF_ERRNO__PROG2BIG, /* Program too big */ + LIBBPF_ERRNO__KVER, /* Incorrect kernel version */ + LIBBPF_ERRNO__PROGTYPE, /* Kernel doesn't support this program type */ + LIBBPF_ERRNO__WRNGPID, /* Wrong pid in netlink message */ + LIBBPF_ERRNO__INVSEQ, /* Invalid netlink sequence */ + LIBBPF_ERRNO__NLPARSE, /* netlink parsing error */ + __LIBBPF_ERRNO__END, +}; + +LIBBPF_API int libbpf_strerror(int err, char *buf, size_t size); + +enum libbpf_print_level { + LIBBPF_WARN, + LIBBPF_INFO, + LIBBPF_DEBUG, +}; + +typedef int (*libbpf_print_fn_t)(enum libbpf_print_level level, + const char *, va_list ap); + +LIBBPF_API libbpf_print_fn_t libbpf_set_print(libbpf_print_fn_t fn); + +/* Hide internal to user */ +struct bpf_object; + +struct bpf_object_open_attr { + const char *file; + enum bpf_prog_type prog_type; +}; + +struct bpf_object_open_opts { + /* size of this struct, for forward/backward compatiblity */ + size_t sz; + /* object name override, if provided: + * - for object open from file, this will override setting object + * name from file path's base name; + * - for object open from memory buffer, this will specify an object + * name and will override default "-" name; + */ + const char *object_name; + /* parse map definitions non-strictly, allowing extra attributes/data */ + bool relaxed_maps; + /* DEPRECATED: handle CO-RE relocations non-strictly, allowing failures. + * Value is ignored. Relocations always are processed non-strictly. + * Non-relocatable instructions are replaced with invalid ones to + * prevent accidental errors. + * */ + bool relaxed_core_relocs; + /* maps that set the 'pinning' attribute in their definition will have + * their pin_path attribute set to a file in this directory, and be + * auto-pinned to that path on load; defaults to "/sys/fs/bpf". + */ + const char *pin_root_path; + __u32 attach_prog_fd; + /* Additional kernel config content that augments and overrides + * system Kconfig for CONFIG_xxx externs. + */ + const char *kconfig; +}; +#define bpf_object_open_opts__last_field kconfig + +LIBBPF_API struct bpf_object *bpf_object__open(const char *path); +LIBBPF_API struct bpf_object * +bpf_object__open_file(const char *path, const struct bpf_object_open_opts *opts); +LIBBPF_API struct bpf_object * +bpf_object__open_mem(const void *obj_buf, size_t obj_buf_sz, + const struct bpf_object_open_opts *opts); + +/* deprecated bpf_object__open variants */ +LIBBPF_API struct bpf_object * +bpf_object__open_buffer(const void *obj_buf, size_t obj_buf_sz, + const char *name); +LIBBPF_API struct bpf_object * +bpf_object__open_xattr(struct bpf_object_open_attr *attr); + +enum libbpf_pin_type { + LIBBPF_PIN_NONE, + /* PIN_BY_NAME: pin maps by name (in /sys/fs/bpf by default) */ + LIBBPF_PIN_BY_NAME, +}; + +/* pin_maps and unpin_maps can both be called with a NULL path, in which case + * they will use the pin_path attribute of each map (and ignore all maps that + * don't have a pin_path set). + */ +LIBBPF_API int bpf_object__pin_maps(struct bpf_object *obj, const char *path); +LIBBPF_API int bpf_object__unpin_maps(struct bpf_object *obj, + const char *path); +LIBBPF_API int bpf_object__pin_programs(struct bpf_object *obj, + const char *path); +LIBBPF_API int bpf_object__unpin_programs(struct bpf_object *obj, + const char *path); +LIBBPF_API int bpf_object__pin(struct bpf_object *object, const char *path); +LIBBPF_API void bpf_object__close(struct bpf_object *object); + +struct bpf_object_load_attr { + struct bpf_object *obj; + int log_level; + const char *target_btf_path; +}; + +/* Load/unload object into/from kernel */ +LIBBPF_API int bpf_object__load(struct bpf_object *obj); +LIBBPF_API int bpf_object__load_xattr(struct bpf_object_load_attr *attr); +LIBBPF_API int bpf_object__unload(struct bpf_object *obj); + +LIBBPF_API const char *bpf_object__name(const struct bpf_object *obj); +LIBBPF_API unsigned int bpf_object__kversion(const struct bpf_object *obj); + +struct btf; +LIBBPF_API struct btf *bpf_object__btf(const struct bpf_object *obj); +LIBBPF_API int bpf_object__btf_fd(const struct bpf_object *obj); + +LIBBPF_API struct bpf_program * +bpf_object__find_program_by_title(const struct bpf_object *obj, + const char *title); +LIBBPF_API struct bpf_program * +bpf_object__find_program_by_name(const struct bpf_object *obj, + const char *name); + +LIBBPF_API struct bpf_object *bpf_object__next(struct bpf_object *prev); +#define bpf_object__for_each_safe(pos, tmp) \ + for ((pos) = bpf_object__next(NULL), \ + (tmp) = bpf_object__next(pos); \ + (pos) != NULL; \ + (pos) = (tmp), (tmp) = bpf_object__next(tmp)) + +typedef void (*bpf_object_clear_priv_t)(struct bpf_object *, void *); +LIBBPF_API int bpf_object__set_priv(struct bpf_object *obj, void *priv, + bpf_object_clear_priv_t clear_priv); +LIBBPF_API void *bpf_object__priv(const struct bpf_object *prog); + +LIBBPF_API int +libbpf_prog_type_by_name(const char *name, enum bpf_prog_type *prog_type, + enum bpf_attach_type *expected_attach_type); +LIBBPF_API int libbpf_attach_type_by_name(const char *name, + enum bpf_attach_type *attach_type); +LIBBPF_API int libbpf_find_vmlinux_btf_id(const char *name, + enum bpf_attach_type attach_type); + +/* Accessors of bpf_program */ +struct bpf_program; +LIBBPF_API struct bpf_program *bpf_program__next(struct bpf_program *prog, + const struct bpf_object *obj); + +#define bpf_object__for_each_program(pos, obj) \ + for ((pos) = bpf_program__next(NULL, (obj)); \ + (pos) != NULL; \ + (pos) = bpf_program__next((pos), (obj))) + +LIBBPF_API struct bpf_program *bpf_program__prev(struct bpf_program *prog, + const struct bpf_object *obj); + +typedef void (*bpf_program_clear_priv_t)(struct bpf_program *, void *); + +LIBBPF_API int bpf_program__set_priv(struct bpf_program *prog, void *priv, + bpf_program_clear_priv_t clear_priv); + +LIBBPF_API void *bpf_program__priv(const struct bpf_program *prog); +LIBBPF_API void bpf_program__set_ifindex(struct bpf_program *prog, + __u32 ifindex); + +LIBBPF_API const char *bpf_program__name(const struct bpf_program *prog); +LIBBPF_API const char *bpf_program__section_name(const struct bpf_program *prog); +LIBBPF_API LIBBPF_DEPRECATED("BPF program title is confusing term; please use bpf_program__section_name() instead") +const char *bpf_program__title(const struct bpf_program *prog, bool needs_copy); +LIBBPF_API bool bpf_program__autoload(const struct bpf_program *prog); +LIBBPF_API int bpf_program__set_autoload(struct bpf_program *prog, bool autoload); + +/* returns program size in bytes */ +LIBBPF_API size_t bpf_program__size(const struct bpf_program *prog); + +LIBBPF_API int bpf_program__load(struct bpf_program *prog, char *license, + __u32 kern_version); +LIBBPF_API int bpf_program__fd(const struct bpf_program *prog); +LIBBPF_API int bpf_program__pin_instance(struct bpf_program *prog, + const char *path, + int instance); +LIBBPF_API int bpf_program__unpin_instance(struct bpf_program *prog, + const char *path, + int instance); +LIBBPF_API int bpf_program__pin(struct bpf_program *prog, const char *path); +LIBBPF_API int bpf_program__unpin(struct bpf_program *prog, const char *path); +LIBBPF_API void bpf_program__unload(struct bpf_program *prog); + +struct bpf_link; + +LIBBPF_API struct bpf_link *bpf_link__open(const char *path); +LIBBPF_API int bpf_link__fd(const struct bpf_link *link); +LIBBPF_API const char *bpf_link__pin_path(const struct bpf_link *link); +LIBBPF_API int bpf_link__pin(struct bpf_link *link, const char *path); +LIBBPF_API int bpf_link__unpin(struct bpf_link *link); +LIBBPF_API int bpf_link__update_program(struct bpf_link *link, + struct bpf_program *prog); +LIBBPF_API void bpf_link__disconnect(struct bpf_link *link); +LIBBPF_API int bpf_link__detach(struct bpf_link *link); +LIBBPF_API int bpf_link__destroy(struct bpf_link *link); + +LIBBPF_API struct bpf_link * +bpf_program__attach(struct bpf_program *prog); +LIBBPF_API struct bpf_link * +bpf_program__attach_perf_event(struct bpf_program *prog, int pfd); +LIBBPF_API struct bpf_link * +bpf_program__attach_kprobe(struct bpf_program *prog, bool retprobe, + const char *func_name); +LIBBPF_API struct bpf_link * +bpf_program__attach_uprobe(struct bpf_program *prog, bool retprobe, + pid_t pid, const char *binary_path, + size_t func_offset); +LIBBPF_API struct bpf_link * +bpf_program__attach_tracepoint(struct bpf_program *prog, + const char *tp_category, + const char *tp_name); +LIBBPF_API struct bpf_link * +bpf_program__attach_raw_tracepoint(struct bpf_program *prog, + const char *tp_name); +LIBBPF_API struct bpf_link * +bpf_program__attach_trace(struct bpf_program *prog); +LIBBPF_API struct bpf_link * +bpf_program__attach_lsm(struct bpf_program *prog); +LIBBPF_API struct bpf_link * +bpf_program__attach_cgroup(struct bpf_program *prog, int cgroup_fd); +LIBBPF_API struct bpf_link * +bpf_program__attach_netns(struct bpf_program *prog, int netns_fd); +LIBBPF_API struct bpf_link * +bpf_program__attach_xdp(struct bpf_program *prog, int ifindex); +LIBBPF_API struct bpf_link * +bpf_program__attach_freplace(struct bpf_program *prog, + int target_fd, const char *attach_func_name); + +struct bpf_map; + +LIBBPF_API struct bpf_link *bpf_map__attach_struct_ops(struct bpf_map *map); + +struct bpf_iter_attach_opts { + size_t sz; /* size of this struct for forward/backward compatibility */ + union bpf_iter_link_info *link_info; + __u32 link_info_len; +}; +#define bpf_iter_attach_opts__last_field link_info_len + +LIBBPF_API struct bpf_link * +bpf_program__attach_iter(struct bpf_program *prog, + const struct bpf_iter_attach_opts *opts); + +struct bpf_insn; + +/* + * Libbpf allows callers to adjust BPF programs before being loaded + * into kernel. One program in an object file can be transformed into + * multiple variants to be attached to different hooks. + * + * bpf_program_prep_t, bpf_program__set_prep and bpf_program__nth_fd + * form an API for this purpose. + * + * - bpf_program_prep_t: + * Defines a 'preprocessor', which is a caller defined function + * passed to libbpf through bpf_program__set_prep(), and will be + * called before program is loaded. The processor should adjust + * the program one time for each instance according to the instance id + * passed to it. + * + * - bpf_program__set_prep: + * Attaches a preprocessor to a BPF program. The number of instances + * that should be created is also passed through this function. + * + * - bpf_program__nth_fd: + * After the program is loaded, get resulting FD of a given instance + * of the BPF program. + * + * If bpf_program__set_prep() is not used, the program would be loaded + * without adjustment during bpf_object__load(). The program has only + * one instance. In this case bpf_program__fd(prog) is equal to + * bpf_program__nth_fd(prog, 0). + */ + +struct bpf_prog_prep_result { + /* + * If not NULL, load new instruction array. + * If set to NULL, don't load this instance. + */ + struct bpf_insn *new_insn_ptr; + int new_insn_cnt; + + /* If not NULL, result FD is written to it. */ + int *pfd; +}; + +/* + * Parameters of bpf_program_prep_t: + * - prog: The bpf_program being loaded. + * - n: Index of instance being generated. + * - insns: BPF instructions array. + * - insns_cnt:Number of instructions in insns. + * - res: Output parameter, result of transformation. + * + * Return value: + * - Zero: pre-processing success. + * - Non-zero: pre-processing error, stop loading. + */ +typedef int (*bpf_program_prep_t)(struct bpf_program *prog, int n, + struct bpf_insn *insns, int insns_cnt, + struct bpf_prog_prep_result *res); + +LIBBPF_API int bpf_program__set_prep(struct bpf_program *prog, int nr_instance, + bpf_program_prep_t prep); + +LIBBPF_API int bpf_program__nth_fd(const struct bpf_program *prog, int n); + +/* + * Adjust type of BPF program. Default is kprobe. + */ +LIBBPF_API int bpf_program__set_socket_filter(struct bpf_program *prog); +LIBBPF_API int bpf_program__set_tracepoint(struct bpf_program *prog); +LIBBPF_API int bpf_program__set_raw_tracepoint(struct bpf_program *prog); +LIBBPF_API int bpf_program__set_kprobe(struct bpf_program *prog); +LIBBPF_API int bpf_program__set_lsm(struct bpf_program *prog); +LIBBPF_API int bpf_program__set_sched_cls(struct bpf_program *prog); +LIBBPF_API int bpf_program__set_sched_act(struct bpf_program *prog); +LIBBPF_API int bpf_program__set_xdp(struct bpf_program *prog); +LIBBPF_API int bpf_program__set_perf_event(struct bpf_program *prog); +LIBBPF_API int bpf_program__set_tracing(struct bpf_program *prog); +LIBBPF_API int bpf_program__set_struct_ops(struct bpf_program *prog); +LIBBPF_API int bpf_program__set_extension(struct bpf_program *prog); +LIBBPF_API int bpf_program__set_sk_lookup(struct bpf_program *prog); + +LIBBPF_API enum bpf_prog_type bpf_program__get_type(struct bpf_program *prog); +LIBBPF_API void bpf_program__set_type(struct bpf_program *prog, + enum bpf_prog_type type); + +LIBBPF_API enum bpf_attach_type +bpf_program__get_expected_attach_type(struct bpf_program *prog); +LIBBPF_API void +bpf_program__set_expected_attach_type(struct bpf_program *prog, + enum bpf_attach_type type); + +LIBBPF_API int +bpf_program__set_attach_target(struct bpf_program *prog, int attach_prog_fd, + const char *attach_func_name); + +LIBBPF_API bool bpf_program__is_socket_filter(const struct bpf_program *prog); +LIBBPF_API bool bpf_program__is_tracepoint(const struct bpf_program *prog); +LIBBPF_API bool bpf_program__is_raw_tracepoint(const struct bpf_program *prog); +LIBBPF_API bool bpf_program__is_kprobe(const struct bpf_program *prog); +LIBBPF_API bool bpf_program__is_lsm(const struct bpf_program *prog); +LIBBPF_API bool bpf_program__is_sched_cls(const struct bpf_program *prog); +LIBBPF_API bool bpf_program__is_sched_act(const struct bpf_program *prog); +LIBBPF_API bool bpf_program__is_xdp(const struct bpf_program *prog); +LIBBPF_API bool bpf_program__is_perf_event(const struct bpf_program *prog); +LIBBPF_API bool bpf_program__is_tracing(const struct bpf_program *prog); +LIBBPF_API bool bpf_program__is_struct_ops(const struct bpf_program *prog); +LIBBPF_API bool bpf_program__is_extension(const struct bpf_program *prog); +LIBBPF_API bool bpf_program__is_sk_lookup(const struct bpf_program *prog); + +/* + * No need for __attribute__((packed)), all members of 'bpf_map_def' + * are all aligned. In addition, using __attribute__((packed)) + * would trigger a -Wpacked warning message, and lead to an error + * if -Werror is set. + */ +struct bpf_map_def { + unsigned int type; + unsigned int key_size; + unsigned int value_size; + unsigned int max_entries; + unsigned int map_flags; +}; + +/* + * The 'struct bpf_map' in include/linux/bpf.h is internal to the kernel, + * so no need to worry about a name clash. + */ +LIBBPF_API struct bpf_map * +bpf_object__find_map_by_name(const struct bpf_object *obj, const char *name); + +LIBBPF_API int +bpf_object__find_map_fd_by_name(const struct bpf_object *obj, const char *name); + +/* + * Get bpf_map through the offset of corresponding struct bpf_map_def + * in the BPF object file. + */ +LIBBPF_API struct bpf_map * +bpf_object__find_map_by_offset(struct bpf_object *obj, size_t offset); + +LIBBPF_API struct bpf_map * +bpf_map__next(const struct bpf_map *map, const struct bpf_object *obj); +#define bpf_object__for_each_map(pos, obj) \ + for ((pos) = bpf_map__next(NULL, (obj)); \ + (pos) != NULL; \ + (pos) = bpf_map__next((pos), (obj))) +#define bpf_map__for_each bpf_object__for_each_map + +LIBBPF_API struct bpf_map * +bpf_map__prev(const struct bpf_map *map, const struct bpf_object *obj); + +/* get/set map FD */ +LIBBPF_API int bpf_map__fd(const struct bpf_map *map); +LIBBPF_API int bpf_map__reuse_fd(struct bpf_map *map, int fd); +/* get map definition */ +LIBBPF_API const struct bpf_map_def *bpf_map__def(const struct bpf_map *map); +/* get map name */ +LIBBPF_API const char *bpf_map__name(const struct bpf_map *map); +/* get/set map type */ +LIBBPF_API enum bpf_map_type bpf_map__type(const struct bpf_map *map); +LIBBPF_API int bpf_map__set_type(struct bpf_map *map, enum bpf_map_type type); +/* get/set map size (max_entries) */ +LIBBPF_API __u32 bpf_map__max_entries(const struct bpf_map *map); +LIBBPF_API int bpf_map__set_max_entries(struct bpf_map *map, __u32 max_entries); +LIBBPF_API int bpf_map__resize(struct bpf_map *map, __u32 max_entries); +/* get/set map flags */ +LIBBPF_API __u32 bpf_map__map_flags(const struct bpf_map *map); +LIBBPF_API int bpf_map__set_map_flags(struct bpf_map *map, __u32 flags); +/* get/set map NUMA node */ +LIBBPF_API __u32 bpf_map__numa_node(const struct bpf_map *map); +LIBBPF_API int bpf_map__set_numa_node(struct bpf_map *map, __u32 numa_node); +/* get/set map key size */ +LIBBPF_API __u32 bpf_map__key_size(const struct bpf_map *map); +LIBBPF_API int bpf_map__set_key_size(struct bpf_map *map, __u32 size); +/* get/set map value size */ +LIBBPF_API __u32 bpf_map__value_size(const struct bpf_map *map); +LIBBPF_API int bpf_map__set_value_size(struct bpf_map *map, __u32 size); +/* get map key/value BTF type IDs */ +LIBBPF_API __u32 bpf_map__btf_key_type_id(const struct bpf_map *map); +LIBBPF_API __u32 bpf_map__btf_value_type_id(const struct bpf_map *map); +/* get/set map if_index */ +LIBBPF_API __u32 bpf_map__ifindex(const struct bpf_map *map); +LIBBPF_API int bpf_map__set_ifindex(struct bpf_map *map, __u32 ifindex); + +typedef void (*bpf_map_clear_priv_t)(struct bpf_map *, void *); +LIBBPF_API int bpf_map__set_priv(struct bpf_map *map, void *priv, + bpf_map_clear_priv_t clear_priv); +LIBBPF_API void *bpf_map__priv(const struct bpf_map *map); +LIBBPF_API int bpf_map__set_initial_value(struct bpf_map *map, + const void *data, size_t size); +LIBBPF_API bool bpf_map__is_offload_neutral(const struct bpf_map *map); +LIBBPF_API bool bpf_map__is_internal(const struct bpf_map *map); +LIBBPF_API int bpf_map__set_pin_path(struct bpf_map *map, const char *path); +LIBBPF_API const char *bpf_map__get_pin_path(const struct bpf_map *map); +LIBBPF_API bool bpf_map__is_pinned(const struct bpf_map *map); +LIBBPF_API int bpf_map__pin(struct bpf_map *map, const char *path); +LIBBPF_API int bpf_map__unpin(struct bpf_map *map, const char *path); + +LIBBPF_API int bpf_map__set_inner_map_fd(struct bpf_map *map, int fd); + +LIBBPF_API long libbpf_get_error(const void *ptr); + +struct bpf_prog_load_attr { + const char *file; + enum bpf_prog_type prog_type; + enum bpf_attach_type expected_attach_type; + int ifindex; + int log_level; + int prog_flags; +}; + +LIBBPF_API int bpf_prog_load_xattr(const struct bpf_prog_load_attr *attr, + struct bpf_object **pobj, int *prog_fd); +LIBBPF_API int bpf_prog_load(const char *file, enum bpf_prog_type type, + struct bpf_object **pobj, int *prog_fd); + +struct xdp_link_info { + __u32 prog_id; + __u32 drv_prog_id; + __u32 hw_prog_id; + __u32 skb_prog_id; + __u8 attach_mode; +}; + +struct bpf_xdp_set_link_opts { + size_t sz; + int old_fd; +}; +#define bpf_xdp_set_link_opts__last_field old_fd + +LIBBPF_API int bpf_set_link_xdp_fd(int ifindex, int fd, __u32 flags); +LIBBPF_API int bpf_set_link_xdp_fd_opts(int ifindex, int fd, __u32 flags, + const struct bpf_xdp_set_link_opts *opts); +LIBBPF_API int bpf_get_link_xdp_id(int ifindex, __u32 *prog_id, __u32 flags); +LIBBPF_API int bpf_get_link_xdp_info(int ifindex, struct xdp_link_info *info, + size_t info_size, __u32 flags); + +/* Ring buffer APIs */ +struct ring_buffer; + +typedef int (*ring_buffer_sample_fn)(void *ctx, void *data, size_t size); + +struct ring_buffer_opts { + size_t sz; /* size of this struct, for forward/backward compatiblity */ +}; + +#define ring_buffer_opts__last_field sz + +LIBBPF_API struct ring_buffer * +ring_buffer__new(int map_fd, ring_buffer_sample_fn sample_cb, void *ctx, + const struct ring_buffer_opts *opts); +LIBBPF_API void ring_buffer__free(struct ring_buffer *rb); +LIBBPF_API int ring_buffer__add(struct ring_buffer *rb, int map_fd, + ring_buffer_sample_fn sample_cb, void *ctx); +LIBBPF_API int ring_buffer__poll(struct ring_buffer *rb, int timeout_ms); +LIBBPF_API int ring_buffer__consume(struct ring_buffer *rb); + +/* Perf buffer APIs */ +struct perf_buffer; + +typedef void (*perf_buffer_sample_fn)(void *ctx, int cpu, + void *data, __u32 size); +typedef void (*perf_buffer_lost_fn)(void *ctx, int cpu, __u64 cnt); + +/* common use perf buffer options */ +struct perf_buffer_opts { + /* if specified, sample_cb is called for each sample */ + perf_buffer_sample_fn sample_cb; + /* if specified, lost_cb is called for each batch of lost samples */ + perf_buffer_lost_fn lost_cb; + /* ctx is provided to sample_cb and lost_cb */ + void *ctx; +}; + +LIBBPF_API struct perf_buffer * +perf_buffer__new(int map_fd, size_t page_cnt, + const struct perf_buffer_opts *opts); + +enum bpf_perf_event_ret { + LIBBPF_PERF_EVENT_DONE = 0, + LIBBPF_PERF_EVENT_ERROR = -1, + LIBBPF_PERF_EVENT_CONT = -2, +}; + +struct perf_event_header; + +typedef enum bpf_perf_event_ret +(*perf_buffer_event_fn)(void *ctx, int cpu, struct perf_event_header *event); + +/* raw perf buffer options, giving most power and control */ +struct perf_buffer_raw_opts { + /* perf event attrs passed directly into perf_event_open() */ + struct perf_event_attr *attr; + /* raw event callback */ + perf_buffer_event_fn event_cb; + /* ctx is provided to event_cb */ + void *ctx; + /* if cpu_cnt == 0, open all on all possible CPUs (up to the number of + * max_entries of given PERF_EVENT_ARRAY map) + */ + int cpu_cnt; + /* if cpu_cnt > 0, cpus is an array of CPUs to open ring buffers on */ + int *cpus; + /* if cpu_cnt > 0, map_keys specify map keys to set per-CPU FDs for */ + int *map_keys; +}; + +LIBBPF_API struct perf_buffer * +perf_buffer__new_raw(int map_fd, size_t page_cnt, + const struct perf_buffer_raw_opts *opts); + +LIBBPF_API void perf_buffer__free(struct perf_buffer *pb); +LIBBPF_API int perf_buffer__epoll_fd(const struct perf_buffer *pb); +LIBBPF_API int perf_buffer__poll(struct perf_buffer *pb, int timeout_ms); +LIBBPF_API int perf_buffer__consume(struct perf_buffer *pb); +LIBBPF_API int perf_buffer__consume_buffer(struct perf_buffer *pb, size_t buf_idx); +LIBBPF_API size_t perf_buffer__buffer_cnt(const struct perf_buffer *pb); +LIBBPF_API int perf_buffer__buffer_fd(const struct perf_buffer *pb, size_t buf_idx); + +typedef enum bpf_perf_event_ret + (*bpf_perf_event_print_t)(struct perf_event_header *hdr, + void *private_data); +LIBBPF_API enum bpf_perf_event_ret +bpf_perf_event_read_simple(void *mmap_mem, size_t mmap_size, size_t page_size, + void **copy_mem, size_t *copy_size, + bpf_perf_event_print_t fn, void *private_data); + +struct bpf_prog_linfo; +struct bpf_prog_info; + +LIBBPF_API void bpf_prog_linfo__free(struct bpf_prog_linfo *prog_linfo); +LIBBPF_API struct bpf_prog_linfo * +bpf_prog_linfo__new(const struct bpf_prog_info *info); +LIBBPF_API const struct bpf_line_info * +bpf_prog_linfo__lfind_addr_func(const struct bpf_prog_linfo *prog_linfo, + __u64 addr, __u32 func_idx, __u32 nr_skip); +LIBBPF_API const struct bpf_line_info * +bpf_prog_linfo__lfind(const struct bpf_prog_linfo *prog_linfo, + __u32 insn_off, __u32 nr_skip); + +/* + * Probe for supported system features + * + * Note that running many of these probes in a short amount of time can cause + * the kernel to reach the maximal size of lockable memory allowed for the + * user, causing subsequent probes to fail. In this case, the caller may want + * to adjust that limit with setrlimit(). + */ +LIBBPF_API bool bpf_probe_prog_type(enum bpf_prog_type prog_type, + __u32 ifindex); +LIBBPF_API bool bpf_probe_map_type(enum bpf_map_type map_type, __u32 ifindex); +LIBBPF_API bool bpf_probe_helper(enum bpf_func_id id, + enum bpf_prog_type prog_type, __u32 ifindex); +LIBBPF_API bool bpf_probe_large_insn_limit(__u32 ifindex); + +/* + * Get bpf_prog_info in continuous memory + * + * struct bpf_prog_info has multiple arrays. The user has option to choose + * arrays to fetch from kernel. The following APIs provide an uniform way to + * fetch these data. All arrays in bpf_prog_info are stored in a single + * continuous memory region. This makes it easy to store the info in a + * file. + * + * Before writing bpf_prog_info_linear to files, it is necessary to + * translate pointers in bpf_prog_info to offsets. Helper functions + * bpf_program__bpil_addr_to_offs() and bpf_program__bpil_offs_to_addr() + * are introduced to switch between pointers and offsets. + * + * Examples: + * # To fetch map_ids and prog_tags: + * __u64 arrays = (1UL << BPF_PROG_INFO_MAP_IDS) | + * (1UL << BPF_PROG_INFO_PROG_TAGS); + * struct bpf_prog_info_linear *info_linear = + * bpf_program__get_prog_info_linear(fd, arrays); + * + * # To save data in file + * bpf_program__bpil_addr_to_offs(info_linear); + * write(f, info_linear, sizeof(*info_linear) + info_linear->data_len); + * + * # To read data from file + * read(f, info_linear, ); + * bpf_program__bpil_offs_to_addr(info_linear); + */ +enum bpf_prog_info_array { + BPF_PROG_INFO_FIRST_ARRAY = 0, + BPF_PROG_INFO_JITED_INSNS = 0, + BPF_PROG_INFO_XLATED_INSNS, + BPF_PROG_INFO_MAP_IDS, + BPF_PROG_INFO_JITED_KSYMS, + BPF_PROG_INFO_JITED_FUNC_LENS, + BPF_PROG_INFO_FUNC_INFO, + BPF_PROG_INFO_LINE_INFO, + BPF_PROG_INFO_JITED_LINE_INFO, + BPF_PROG_INFO_PROG_TAGS, + BPF_PROG_INFO_LAST_ARRAY, +}; + +struct bpf_prog_info_linear { + /* size of struct bpf_prog_info, when the tool is compiled */ + __u32 info_len; + /* total bytes allocated for data, round up to 8 bytes */ + __u32 data_len; + /* which arrays are included in data */ + __u64 arrays; + struct bpf_prog_info info; + __u8 data[]; +}; + +LIBBPF_API struct bpf_prog_info_linear * +bpf_program__get_prog_info_linear(int fd, __u64 arrays); + +LIBBPF_API void +bpf_program__bpil_addr_to_offs(struct bpf_prog_info_linear *info_linear); + +LIBBPF_API void +bpf_program__bpil_offs_to_addr(struct bpf_prog_info_linear *info_linear); + +/* + * A helper function to get the number of possible CPUs before looking up + * per-CPU maps. Negative errno is returned on failure. + * + * Example usage: + * + * int ncpus = libbpf_num_possible_cpus(); + * if (ncpus < 0) { + * // error handling + * } + * long values[ncpus]; + * bpf_map_lookup_elem(per_cpu_map_fd, key, values); + * + */ +LIBBPF_API int libbpf_num_possible_cpus(void); + +struct bpf_map_skeleton { + const char *name; + struct bpf_map **map; + void **mmaped; +}; + +struct bpf_prog_skeleton { + const char *name; + struct bpf_program **prog; + struct bpf_link **link; +}; + +struct bpf_object_skeleton { + size_t sz; /* size of this struct, for forward/backward compatibility */ + + const char *name; + void *data; + size_t data_sz; + + struct bpf_object **obj; + + int map_cnt; + int map_skel_sz; /* sizeof(struct bpf_skeleton_map) */ + struct bpf_map_skeleton *maps; + + int prog_cnt; + int prog_skel_sz; /* sizeof(struct bpf_skeleton_prog) */ + struct bpf_prog_skeleton *progs; +}; + +LIBBPF_API int +bpf_object__open_skeleton(struct bpf_object_skeleton *s, + const struct bpf_object_open_opts *opts); +LIBBPF_API int bpf_object__load_skeleton(struct bpf_object_skeleton *s); +LIBBPF_API int bpf_object__attach_skeleton(struct bpf_object_skeleton *s); +LIBBPF_API void bpf_object__detach_skeleton(struct bpf_object_skeleton *s); +LIBBPF_API void bpf_object__destroy_skeleton(struct bpf_object_skeleton *s); + +enum libbpf_tristate { + TRI_NO = 0, + TRI_YES = 1, + TRI_MODULE = 2, +}; + +#ifdef __cplusplus +} /* extern "C" */ +#endif + +#endif /* __LIBBPF_LIBBPF_H */ diff --git a/resources/usr/include/bpf/libbpf_common.h b/resources/usr/include/bpf/libbpf_common.h new file mode 100644 index 0000000..947d8bd --- /dev/null +++ b/resources/usr/include/bpf/libbpf_common.h @@ -0,0 +1,42 @@ +/* SPDX-License-Identifier: (LGPL-2.1 OR BSD-2-Clause) */ + +/* + * Common user-facing libbpf helpers. + * + * Copyright (c) 2019 Facebook + */ + +#ifndef __LIBBPF_LIBBPF_COMMON_H +#define __LIBBPF_LIBBPF_COMMON_H + +#include + +#ifndef LIBBPF_API +#define LIBBPF_API __attribute__((visibility("default"))) +#endif + +#define LIBBPF_DEPRECATED(msg) __attribute__((deprecated(msg))) + +/* Helper macro to declare and initialize libbpf options struct + * + * This dance with uninitialized declaration, followed by memset to zero, + * followed by assignment using compound literal syntax is done to preserve + * ability to use a nice struct field initialization syntax and **hopefully** + * have all the padding bytes initialized to zero. It's not guaranteed though, + * when copying literal, that compiler won't copy garbage in literal's padding + * bytes, but that's the best way I've found and it seems to work in practice. + * + * Macro declares opts struct of given type and name, zero-initializes, + * including any extra padding, it with memset() and then assigns initial + * values provided by users in struct initializer-syntax as varargs. + */ +#define DECLARE_LIBBPF_OPTS(TYPE, NAME, ...) \ + struct TYPE NAME = ({ \ + memset(&NAME, 0, sizeof(struct TYPE)); \ + (struct TYPE) { \ + .sz = sizeof(struct TYPE), \ + __VA_ARGS__ \ + }; \ + }) + +#endif /* __LIBBPF_LIBBPF_COMMON_H */ diff --git a/resources/usr/include/bpf/linux/asm-generic/socket.h b/resources/usr/include/bpf/linux/asm-generic/socket.h new file mode 100644 index 0000000..77f7c16 --- /dev/null +++ b/resources/usr/include/bpf/linux/asm-generic/socket.h @@ -0,0 +1,147 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef __ASM_GENERIC_SOCKET_H +#define __ASM_GENERIC_SOCKET_H + +#include +#include + +/* For setsockopt(2) */ +#define SOL_SOCKET 1 + +#define SO_DEBUG 1 +#define SO_REUSEADDR 2 +#define SO_TYPE 3 +#define SO_ERROR 4 +#define SO_DONTROUTE 5 +#define SO_BROADCAST 6 +#define SO_SNDBUF 7 +#define SO_RCVBUF 8 +#define SO_SNDBUFFORCE 32 +#define SO_RCVBUFFORCE 33 +#define SO_KEEPALIVE 9 +#define SO_OOBINLINE 10 +#define SO_NO_CHECK 11 +#define SO_PRIORITY 12 +#define SO_LINGER 13 +#define SO_BSDCOMPAT 14 +#define SO_REUSEPORT 15 +#ifndef SO_PASSCRED /* powerpc only differs in these */ +#define SO_PASSCRED 16 +#define SO_PEERCRED 17 +#define SO_RCVLOWAT 18 +#define SO_SNDLOWAT 19 +#define SO_RCVTIMEO_OLD 20 +#define SO_SNDTIMEO_OLD 21 +#endif + +/* Security levels - as per NRL IPv6 - don't actually do anything */ +#define SO_SECURITY_AUTHENTICATION 22 +#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 +#define SO_SECURITY_ENCRYPTION_NETWORK 24 + +#define SO_BINDTODEVICE 25 + +/* Socket filtering */ +#define SO_ATTACH_FILTER 26 +#define SO_DETACH_FILTER 27 +#define SO_GET_FILTER SO_ATTACH_FILTER + +#define SO_PEERNAME 28 + +#define SO_ACCEPTCONN 30 + +#define SO_PEERSEC 31 +#define SO_PASSSEC 34 + +#define SO_MARK 36 + +#define SO_PROTOCOL 38 +#define SO_DOMAIN 39 + +#define SO_RXQ_OVFL 40 + +#define SO_WIFI_STATUS 41 +#define SCM_WIFI_STATUS SO_WIFI_STATUS +#define SO_PEEK_OFF 42 + +/* Instruct lower device to use last 4-bytes of skb data as FCS */ +#define SO_NOFCS 43 + +#define SO_LOCK_FILTER 44 + +#define SO_SELECT_ERR_QUEUE 45 + +#define SO_BUSY_POLL 46 + +#define SO_MAX_PACING_RATE 47 + +#define SO_BPF_EXTENSIONS 48 + +#define SO_INCOMING_CPU 49 + +#define SO_ATTACH_BPF 50 +#define SO_DETACH_BPF SO_DETACH_FILTER + +#define SO_ATTACH_REUSEPORT_CBPF 51 +#define SO_ATTACH_REUSEPORT_EBPF 52 + +#define SO_CNX_ADVICE 53 + +#define SCM_TIMESTAMPING_OPT_STATS 54 + +#define SO_MEMINFO 55 + +#define SO_INCOMING_NAPI_ID 56 + +#define SO_COOKIE 57 + +#define SCM_TIMESTAMPING_PKTINFO 58 + +#define SO_PEERGROUPS 59 + +#define SO_ZEROCOPY 60 + +#define SO_TXTIME 61 +#define SCM_TXTIME SO_TXTIME + +#define SO_BINDTOIFINDEX 62 + +#define SO_TIMESTAMP_OLD 29 +#define SO_TIMESTAMPNS_OLD 35 +#define SO_TIMESTAMPING_OLD 37 + +#define SO_TIMESTAMP_NEW 63 +#define SO_TIMESTAMPNS_NEW 64 +#define SO_TIMESTAMPING_NEW 65 + +#define SO_RCVTIMEO_NEW 66 +#define SO_SNDTIMEO_NEW 67 + +#define SO_DETACH_REUSEPORT_BPF 68 + +#if !defined(__KERNEL__) + +#if __BITS_PER_LONG == 64 || (defined(__x86_64__) && defined(__ILP32__)) +/* on 64-bit and x32, avoid the ?: operator */ +#define SO_TIMESTAMP SO_TIMESTAMP_OLD +#define SO_TIMESTAMPNS SO_TIMESTAMPNS_OLD +#define SO_TIMESTAMPING SO_TIMESTAMPING_OLD + +#define SO_RCVTIMEO SO_RCVTIMEO_OLD +#define SO_SNDTIMEO SO_SNDTIMEO_OLD +#else +#define SO_TIMESTAMP (sizeof(time_t) == sizeof(__kernel_long_t) ? SO_TIMESTAMP_OLD : SO_TIMESTAMP_NEW) +#define SO_TIMESTAMPNS (sizeof(time_t) == sizeof(__kernel_long_t) ? SO_TIMESTAMPNS_OLD : SO_TIMESTAMPNS_NEW) +#define SO_TIMESTAMPING (sizeof(time_t) == sizeof(__kernel_long_t) ? SO_TIMESTAMPING_OLD : SO_TIMESTAMPING_NEW) + +#define SO_RCVTIMEO (sizeof(time_t) == sizeof(__kernel_long_t) ? SO_RCVTIMEO_OLD : SO_RCVTIMEO_NEW) +#define SO_SNDTIMEO (sizeof(time_t) == sizeof(__kernel_long_t) ? SO_SNDTIMEO_OLD : SO_SNDTIMEO_NEW) +#endif + +#define SCM_TIMESTAMP SO_TIMESTAMP +#define SCM_TIMESTAMPNS SO_TIMESTAMPNS +#define SCM_TIMESTAMPING SO_TIMESTAMPING + +#endif + +#endif /* __ASM_GENERIC_SOCKET_H */ diff --git a/resources/usr/include/bpf/linux/bpf.h b/resources/usr/include/bpf/linux/bpf.h new file mode 100644 index 0000000..556216d --- /dev/null +++ b/resources/usr/include/bpf/linux/bpf.h @@ -0,0 +1,5051 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +/* Copyright (c) 2011-2014 PLUMgrid, http://plumgrid.com + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of version 2 of the GNU General Public + * License as published by the Free Software Foundation. + */ +#ifndef _UAPI__LINUX_BPF_H__ +#define _UAPI__LINUX_BPF_H__ + +#include +#include + +/* Extended instruction set based on top of classic BPF */ + +/* instruction classes */ +#define BPF_JMP32 0x06 /* jmp mode in word width */ +#define BPF_ALU64 0x07 /* alu mode in double word width */ + +/* ld/ldx fields */ +#define BPF_DW 0x18 /* double word (64-bit) */ +#define BPF_XADD 0xc0 /* exclusive add */ + +/* alu/jmp fields */ +#define BPF_MOV 0xb0 /* mov reg to reg */ +#define BPF_ARSH 0xc0 /* sign extending arithmetic shift right */ + +/* change endianness of a register */ +#define BPF_END 0xd0 /* flags for endianness conversion: */ +#define BPF_TO_LE 0x00 /* convert to little-endian */ +#define BPF_TO_BE 0x08 /* convert to big-endian */ +#define BPF_FROM_LE BPF_TO_LE +#define BPF_FROM_BE BPF_TO_BE + +/* jmp encodings */ +#define BPF_JNE 0x50 /* jump != */ +#define BPF_JLT 0xa0 /* LT is unsigned, '<' */ +#define BPF_JLE 0xb0 /* LE is unsigned, '<=' */ +#define BPF_JSGT 0x60 /* SGT is signed '>', GT in x86 */ +#define BPF_JSGE 0x70 /* SGE is signed '>=', GE in x86 */ +#define BPF_JSLT 0xc0 /* SLT is signed, '<' */ +#define BPF_JSLE 0xd0 /* SLE is signed, '<=' */ +#define BPF_CALL 0x80 /* function call */ +#define BPF_EXIT 0x90 /* function return */ + +/* Register numbers */ +enum { + BPF_REG_0 = 0, + BPF_REG_1, + BPF_REG_2, + BPF_REG_3, + BPF_REG_4, + BPF_REG_5, + BPF_REG_6, + BPF_REG_7, + BPF_REG_8, + BPF_REG_9, + BPF_REG_10, + __MAX_BPF_REG, +}; + +/* BPF has 10 general purpose 64-bit registers and stack frame. */ +#define MAX_BPF_REG __MAX_BPF_REG + +struct bpf_insn { + __u8 code; /* opcode */ + __u8 dst_reg:4; /* dest register */ + __u8 src_reg:4; /* source register */ + __s16 off; /* signed offset */ + __s32 imm; /* signed immediate constant */ +}; + +/* Key of an a BPF_MAP_TYPE_LPM_TRIE entry */ +struct bpf_lpm_trie_key { + __u32 prefixlen; /* up to 32 for AF_INET, 128 for AF_INET6 */ + __u8 data[0]; /* Arbitrary size */ +}; + +struct bpf_cgroup_storage_key { + __u64 cgroup_inode_id; /* cgroup inode id */ + __u32 attach_type; /* program attach type */ +}; + +union bpf_iter_link_info { + struct { + __u32 map_fd; + } map; +}; + +/* BPF syscall commands, see bpf(2) man-page for details. */ +enum bpf_cmd { + BPF_MAP_CREATE, + BPF_MAP_LOOKUP_ELEM, + BPF_MAP_UPDATE_ELEM, + BPF_MAP_DELETE_ELEM, + BPF_MAP_GET_NEXT_KEY, + BPF_PROG_LOAD, + BPF_OBJ_PIN, + BPF_OBJ_GET, + BPF_PROG_ATTACH, + BPF_PROG_DETACH, + BPF_PROG_TEST_RUN, + BPF_PROG_GET_NEXT_ID, + BPF_MAP_GET_NEXT_ID, + BPF_PROG_GET_FD_BY_ID, + BPF_MAP_GET_FD_BY_ID, + BPF_OBJ_GET_INFO_BY_FD, + BPF_PROG_QUERY, + BPF_RAW_TRACEPOINT_OPEN, + BPF_BTF_LOAD, + BPF_BTF_GET_FD_BY_ID, + BPF_TASK_FD_QUERY, + BPF_MAP_LOOKUP_AND_DELETE_ELEM, + BPF_MAP_FREEZE, + BPF_BTF_GET_NEXT_ID, + BPF_MAP_LOOKUP_BATCH, + BPF_MAP_LOOKUP_AND_DELETE_BATCH, + BPF_MAP_UPDATE_BATCH, + BPF_MAP_DELETE_BATCH, + BPF_LINK_CREATE, + BPF_LINK_UPDATE, + BPF_LINK_GET_FD_BY_ID, + BPF_LINK_GET_NEXT_ID, + BPF_ENABLE_STATS, + BPF_ITER_CREATE, + BPF_LINK_DETACH, + BPF_PROG_BIND_MAP, +}; + +enum bpf_map_type { + BPF_MAP_TYPE_UNSPEC, + BPF_MAP_TYPE_HASH, + BPF_MAP_TYPE_ARRAY, + BPF_MAP_TYPE_PROG_ARRAY, + BPF_MAP_TYPE_PERF_EVENT_ARRAY, + BPF_MAP_TYPE_PERCPU_HASH, + BPF_MAP_TYPE_PERCPU_ARRAY, + BPF_MAP_TYPE_STACK_TRACE, + BPF_MAP_TYPE_CGROUP_ARRAY, + BPF_MAP_TYPE_LRU_HASH, + BPF_MAP_TYPE_LRU_PERCPU_HASH, + BPF_MAP_TYPE_LPM_TRIE, + BPF_MAP_TYPE_ARRAY_OF_MAPS, + BPF_MAP_TYPE_HASH_OF_MAPS, + BPF_MAP_TYPE_DEVMAP, + BPF_MAP_TYPE_SOCKMAP, + BPF_MAP_TYPE_CPUMAP, + BPF_MAP_TYPE_XSKMAP, + BPF_MAP_TYPE_SOCKHASH, + BPF_MAP_TYPE_CGROUP_STORAGE, + BPF_MAP_TYPE_REUSEPORT_SOCKARRAY, + BPF_MAP_TYPE_PERCPU_CGROUP_STORAGE, + BPF_MAP_TYPE_QUEUE, + BPF_MAP_TYPE_STACK, + BPF_MAP_TYPE_SK_STORAGE, + BPF_MAP_TYPE_DEVMAP_HASH, + BPF_MAP_TYPE_STRUCT_OPS, + BPF_MAP_TYPE_RINGBUF, + BPF_MAP_TYPE_INODE_STORAGE, +}; + +/* Note that tracing related programs such as + * BPF_PROG_TYPE_{KPROBE,TRACEPOINT,PERF_EVENT,RAW_TRACEPOINT} + * are not subject to a stable API since kernel internal data + * structures can change from release to release and may + * therefore break existing tracing BPF programs. Tracing BPF + * programs correspond to /a/ specific kernel which is to be + * analyzed, and not /a/ specific kernel /and/ all future ones. + */ +enum bpf_prog_type { + BPF_PROG_TYPE_UNSPEC, + BPF_PROG_TYPE_SOCKET_FILTER, + BPF_PROG_TYPE_KPROBE, + BPF_PROG_TYPE_SCHED_CLS, + BPF_PROG_TYPE_SCHED_ACT, + BPF_PROG_TYPE_TRACEPOINT, + BPF_PROG_TYPE_XDP, + BPF_PROG_TYPE_PERF_EVENT, + BPF_PROG_TYPE_CGROUP_SKB, + BPF_PROG_TYPE_CGROUP_SOCK, + BPF_PROG_TYPE_LWT_IN, + BPF_PROG_TYPE_LWT_OUT, + BPF_PROG_TYPE_LWT_XMIT, + BPF_PROG_TYPE_SOCK_OPS, + BPF_PROG_TYPE_SK_SKB, + BPF_PROG_TYPE_CGROUP_DEVICE, + BPF_PROG_TYPE_SK_MSG, + BPF_PROG_TYPE_RAW_TRACEPOINT, + BPF_PROG_TYPE_CGROUP_SOCK_ADDR, + BPF_PROG_TYPE_LWT_SEG6LOCAL, + BPF_PROG_TYPE_LIRC_MODE2, + BPF_PROG_TYPE_SK_REUSEPORT, + BPF_PROG_TYPE_FLOW_DISSECTOR, + BPF_PROG_TYPE_CGROUP_SYSCTL, + BPF_PROG_TYPE_RAW_TRACEPOINT_WRITABLE, + BPF_PROG_TYPE_CGROUP_SOCKOPT, + BPF_PROG_TYPE_TRACING, + BPF_PROG_TYPE_STRUCT_OPS, + BPF_PROG_TYPE_EXT, + BPF_PROG_TYPE_LSM, + BPF_PROG_TYPE_SK_LOOKUP, +}; + +enum bpf_attach_type { + BPF_CGROUP_INET_INGRESS, + BPF_CGROUP_INET_EGRESS, + BPF_CGROUP_INET_SOCK_CREATE, + BPF_CGROUP_SOCK_OPS, + BPF_SK_SKB_STREAM_PARSER, + BPF_SK_SKB_STREAM_VERDICT, + BPF_CGROUP_DEVICE, + BPF_SK_MSG_VERDICT, + BPF_CGROUP_INET4_BIND, + BPF_CGROUP_INET6_BIND, + BPF_CGROUP_INET4_CONNECT, + BPF_CGROUP_INET6_CONNECT, + BPF_CGROUP_INET4_POST_BIND, + BPF_CGROUP_INET6_POST_BIND, + BPF_CGROUP_UDP4_SENDMSG, + BPF_CGROUP_UDP6_SENDMSG, + BPF_LIRC_MODE2, + BPF_FLOW_DISSECTOR, + BPF_CGROUP_SYSCTL, + BPF_CGROUP_UDP4_RECVMSG, + BPF_CGROUP_UDP6_RECVMSG, + BPF_CGROUP_GETSOCKOPT, + BPF_CGROUP_SETSOCKOPT, + BPF_TRACE_RAW_TP, + BPF_TRACE_FENTRY, + BPF_TRACE_FEXIT, + BPF_MODIFY_RETURN, + BPF_LSM_MAC, + BPF_TRACE_ITER, + BPF_CGROUP_INET4_GETPEERNAME, + BPF_CGROUP_INET6_GETPEERNAME, + BPF_CGROUP_INET4_GETSOCKNAME, + BPF_CGROUP_INET6_GETSOCKNAME, + BPF_XDP_DEVMAP, + BPF_CGROUP_INET_SOCK_RELEASE, + BPF_XDP_CPUMAP, + BPF_SK_LOOKUP, + BPF_XDP, + __MAX_BPF_ATTACH_TYPE +}; + +#define MAX_BPF_ATTACH_TYPE __MAX_BPF_ATTACH_TYPE + +enum bpf_link_type { + BPF_LINK_TYPE_UNSPEC = 0, + BPF_LINK_TYPE_RAW_TRACEPOINT = 1, + BPF_LINK_TYPE_TRACING = 2, + BPF_LINK_TYPE_CGROUP = 3, + BPF_LINK_TYPE_ITER = 4, + BPF_LINK_TYPE_NETNS = 5, + BPF_LINK_TYPE_XDP = 6, + + MAX_BPF_LINK_TYPE, +}; + +/* cgroup-bpf attach flags used in BPF_PROG_ATTACH command + * + * NONE(default): No further bpf programs allowed in the subtree. + * + * BPF_F_ALLOW_OVERRIDE: If a sub-cgroup installs some bpf program, + * the program in this cgroup yields to sub-cgroup program. + * + * BPF_F_ALLOW_MULTI: If a sub-cgroup installs some bpf program, + * that cgroup program gets run in addition to the program in this cgroup. + * + * Only one program is allowed to be attached to a cgroup with + * NONE or BPF_F_ALLOW_OVERRIDE flag. + * Attaching another program on top of NONE or BPF_F_ALLOW_OVERRIDE will + * release old program and attach the new one. Attach flags has to match. + * + * Multiple programs are allowed to be attached to a cgroup with + * BPF_F_ALLOW_MULTI flag. They are executed in FIFO order + * (those that were attached first, run first) + * The programs of sub-cgroup are executed first, then programs of + * this cgroup and then programs of parent cgroup. + * When children program makes decision (like picking TCP CA or sock bind) + * parent program has a chance to override it. + * + * With BPF_F_ALLOW_MULTI a new program is added to the end of the list of + * programs for a cgroup. Though it's possible to replace an old program at + * any position by also specifying BPF_F_REPLACE flag and position itself in + * replace_bpf_fd attribute. Old program at this position will be released. + * + * A cgroup with MULTI or OVERRIDE flag allows any attach flags in sub-cgroups. + * A cgroup with NONE doesn't allow any programs in sub-cgroups. + * Ex1: + * cgrp1 (MULTI progs A, B) -> + * cgrp2 (OVERRIDE prog C) -> + * cgrp3 (MULTI prog D) -> + * cgrp4 (OVERRIDE prog E) -> + * cgrp5 (NONE prog F) + * the event in cgrp5 triggers execution of F,D,A,B in that order. + * if prog F is detached, the execution is E,D,A,B + * if prog F and D are detached, the execution is E,A,B + * if prog F, E and D are detached, the execution is C,A,B + * + * All eligible programs are executed regardless of return code from + * earlier programs. + */ +#define BPF_F_ALLOW_OVERRIDE (1U << 0) +#define BPF_F_ALLOW_MULTI (1U << 1) +#define BPF_F_REPLACE (1U << 2) + +/* If BPF_F_STRICT_ALIGNMENT is used in BPF_PROG_LOAD command, the + * verifier will perform strict alignment checking as if the kernel + * has been built with CONFIG_EFFICIENT_UNALIGNED_ACCESS not set, + * and NET_IP_ALIGN defined to 2. + */ +#define BPF_F_STRICT_ALIGNMENT (1U << 0) + +/* If BPF_F_ANY_ALIGNMENT is used in BPF_PROF_LOAD command, the + * verifier will allow any alignment whatsoever. On platforms + * with strict alignment requirements for loads ands stores (such + * as sparc and mips) the verifier validates that all loads and + * stores provably follow this requirement. This flag turns that + * checking and enforcement off. + * + * It is mostly used for testing when we want to validate the + * context and memory access aspects of the verifier, but because + * of an unaligned access the alignment check would trigger before + * the one we are interested in. + */ +#define BPF_F_ANY_ALIGNMENT (1U << 1) + +/* BPF_F_TEST_RND_HI32 is used in BPF_PROG_LOAD command for testing purpose. + * Verifier does sub-register def/use analysis and identifies instructions whose + * def only matters for low 32-bit, high 32-bit is never referenced later + * through implicit zero extension. Therefore verifier notifies JIT back-ends + * that it is safe to ignore clearing high 32-bit for these instructions. This + * saves some back-ends a lot of code-gen. However such optimization is not + * necessary on some arches, for example x86_64, arm64 etc, whose JIT back-ends + * hence hasn't used verifier's analysis result. But, we really want to have a + * way to be able to verify the correctness of the described optimization on + * x86_64 on which testsuites are frequently exercised. + * + * So, this flag is introduced. Once it is set, verifier will randomize high + * 32-bit for those instructions who has been identified as safe to ignore them. + * Then, if verifier is not doing correct analysis, such randomization will + * regress tests to expose bugs. + */ +#define BPF_F_TEST_RND_HI32 (1U << 2) + +/* The verifier internal test flag. Behavior is undefined */ +#define BPF_F_TEST_STATE_FREQ (1U << 3) + +/* If BPF_F_SLEEPABLE is used in BPF_PROG_LOAD command, the verifier will + * restrict map and helper usage for such programs. Sleepable BPF programs can + * only be attached to hooks where kernel execution context allows sleeping. + * Such programs are allowed to use helpers that may sleep like + * bpf_copy_from_user(). + */ +#define BPF_F_SLEEPABLE (1U << 4) + +/* When BPF ldimm64's insn[0].src_reg != 0 then this can have + * the following extensions: + * + * insn[0].src_reg: BPF_PSEUDO_MAP_FD + * insn[0].imm: map fd + * insn[1].imm: 0 + * insn[0].off: 0 + * insn[1].off: 0 + * ldimm64 rewrite: address of map + * verifier type: CONST_PTR_TO_MAP + */ +#define BPF_PSEUDO_MAP_FD 1 +/* insn[0].src_reg: BPF_PSEUDO_MAP_VALUE + * insn[0].imm: map fd + * insn[1].imm: offset into value + * insn[0].off: 0 + * insn[1].off: 0 + * ldimm64 rewrite: address of map[0]+offset + * verifier type: PTR_TO_MAP_VALUE + */ +#define BPF_PSEUDO_MAP_VALUE 2 +/* insn[0].src_reg: BPF_PSEUDO_BTF_ID + * insn[0].imm: kernel btd id of VAR + * insn[1].imm: 0 + * insn[0].off: 0 + * insn[1].off: 0 + * ldimm64 rewrite: address of the kernel variable + * verifier type: PTR_TO_BTF_ID or PTR_TO_MEM, depending on whether the var + * is struct/union. + */ +#define BPF_PSEUDO_BTF_ID 3 + +/* when bpf_call->src_reg == BPF_PSEUDO_CALL, bpf_call->imm == pc-relative + * offset to another bpf function + */ +#define BPF_PSEUDO_CALL 1 + +/* flags for BPF_MAP_UPDATE_ELEM command */ +enum { + BPF_ANY = 0, /* create new element or update existing */ + BPF_NOEXIST = 1, /* create new element if it didn't exist */ + BPF_EXIST = 2, /* update existing element */ + BPF_F_LOCK = 4, /* spin_lock-ed map_lookup/map_update */ +}; + +/* flags for BPF_MAP_CREATE command */ +enum { + BPF_F_NO_PREALLOC = (1U << 0), +/* Instead of having one common LRU list in the + * BPF_MAP_TYPE_LRU_[PERCPU_]HASH map, use a percpu LRU list + * which can scale and perform better. + * Note, the LRU nodes (including free nodes) cannot be moved + * across different LRU lists. + */ + BPF_F_NO_COMMON_LRU = (1U << 1), +/* Specify numa node during map creation */ + BPF_F_NUMA_NODE = (1U << 2), + +/* Flags for accessing BPF object from syscall side. */ + BPF_F_RDONLY = (1U << 3), + BPF_F_WRONLY = (1U << 4), + +/* Flag for stack_map, store build_id+offset instead of pointer */ + BPF_F_STACK_BUILD_ID = (1U << 5), + +/* Zero-initialize hash function seed. This should only be used for testing. */ + BPF_F_ZERO_SEED = (1U << 6), + +/* Flags for accessing BPF object from program side. */ + BPF_F_RDONLY_PROG = (1U << 7), + BPF_F_WRONLY_PROG = (1U << 8), + +/* Clone map from listener for newly accepted socket */ + BPF_F_CLONE = (1U << 9), + +/* Enable memory-mapping BPF map */ + BPF_F_MMAPABLE = (1U << 10), + +/* Share perf_event among processes */ + BPF_F_PRESERVE_ELEMS = (1U << 11), + +/* Create a map that is suitable to be an inner map with dynamic max entries */ + BPF_F_INNER_MAP = (1U << 12), +}; + +/* Flags for BPF_PROG_QUERY. */ + +/* Query effective (directly attached + inherited from ancestor cgroups) + * programs that will be executed for events within a cgroup. + * attach_flags with this flag are returned only for directly attached programs. + */ +#define BPF_F_QUERY_EFFECTIVE (1U << 0) + +/* Flags for BPF_PROG_TEST_RUN */ + +/* If set, run the test on the cpu specified by bpf_attr.test.cpu */ +#define BPF_F_TEST_RUN_ON_CPU (1U << 0) + +/* type for BPF_ENABLE_STATS */ +enum bpf_stats_type { + /* enabled run_time_ns and run_cnt */ + BPF_STATS_RUN_TIME = 0, +}; + +enum bpf_stack_build_id_status { + /* user space need an empty entry to identify end of a trace */ + BPF_STACK_BUILD_ID_EMPTY = 0, + /* with valid build_id and offset */ + BPF_STACK_BUILD_ID_VALID = 1, + /* couldn't get build_id, fallback to ip */ + BPF_STACK_BUILD_ID_IP = 2, +}; + +#define BPF_BUILD_ID_SIZE 20 +struct bpf_stack_build_id { + __s32 status; + unsigned char build_id[BPF_BUILD_ID_SIZE]; + union { + __u64 offset; + __u64 ip; + }; +}; + +#define BPF_OBJ_NAME_LEN 16U + +union bpf_attr { + struct { /* anonymous struct used by BPF_MAP_CREATE command */ + __u32 map_type; /* one of enum bpf_map_type */ + __u32 key_size; /* size of key in bytes */ + __u32 value_size; /* size of value in bytes */ + __u32 max_entries; /* max number of entries in a map */ + __u32 map_flags; /* BPF_MAP_CREATE related + * flags defined above. + */ + __u32 inner_map_fd; /* fd pointing to the inner map */ + __u32 numa_node; /* numa node (effective only if + * BPF_F_NUMA_NODE is set). + */ + char map_name[BPF_OBJ_NAME_LEN]; + __u32 map_ifindex; /* ifindex of netdev to create on */ + __u32 btf_fd; /* fd pointing to a BTF type data */ + __u32 btf_key_type_id; /* BTF type_id of the key */ + __u32 btf_value_type_id; /* BTF type_id of the value */ + __u32 btf_vmlinux_value_type_id;/* BTF type_id of a kernel- + * struct stored as the + * map value + */ + }; + + struct { /* anonymous struct used by BPF_MAP_*_ELEM commands */ + __u32 map_fd; + __aligned_u64 key; + union { + __aligned_u64 value; + __aligned_u64 next_key; + }; + __u64 flags; + }; + + struct { /* struct used by BPF_MAP_*_BATCH commands */ + __aligned_u64 in_batch; /* start batch, + * NULL to start from beginning + */ + __aligned_u64 out_batch; /* output: next start batch */ + __aligned_u64 keys; + __aligned_u64 values; + __u32 count; /* input/output: + * input: # of key/value + * elements + * output: # of filled elements + */ + __u32 map_fd; + __u64 elem_flags; + __u64 flags; + } batch; + + struct { /* anonymous struct used by BPF_PROG_LOAD command */ + __u32 prog_type; /* one of enum bpf_prog_type */ + __u32 insn_cnt; + __aligned_u64 insns; + __aligned_u64 license; + __u32 log_level; /* verbosity level of verifier */ + __u32 log_size; /* size of user buffer */ + __aligned_u64 log_buf; /* user supplied buffer */ + __u32 kern_version; /* not used */ + __u32 prog_flags; + char prog_name[BPF_OBJ_NAME_LEN]; + __u32 prog_ifindex; /* ifindex of netdev to prep for */ + /* For some prog types expected attach type must be known at + * load time to verify attach type specific parts of prog + * (context accesses, allowed helpers, etc). + */ + __u32 expected_attach_type; + __u32 prog_btf_fd; /* fd pointing to BTF type data */ + __u32 func_info_rec_size; /* userspace bpf_func_info size */ + __aligned_u64 func_info; /* func info */ + __u32 func_info_cnt; /* number of bpf_func_info records */ + __u32 line_info_rec_size; /* userspace bpf_line_info size */ + __aligned_u64 line_info; /* line info */ + __u32 line_info_cnt; /* number of bpf_line_info records */ + __u32 attach_btf_id; /* in-kernel BTF type id to attach to */ + __u32 attach_prog_fd; /* 0 to attach to vmlinux */ + }; + + struct { /* anonymous struct used by BPF_OBJ_* commands */ + __aligned_u64 pathname; + __u32 bpf_fd; + __u32 file_flags; + }; + + struct { /* anonymous struct used by BPF_PROG_ATTACH/DETACH commands */ + __u32 target_fd; /* container object to attach to */ + __u32 attach_bpf_fd; /* eBPF program to attach */ + __u32 attach_type; + __u32 attach_flags; + __u32 replace_bpf_fd; /* previously attached eBPF + * program to replace if + * BPF_F_REPLACE is used + */ + }; + + struct { /* anonymous struct used by BPF_PROG_TEST_RUN command */ + __u32 prog_fd; + __u32 retval; + __u32 data_size_in; /* input: len of data_in */ + __u32 data_size_out; /* input/output: len of data_out + * returns ENOSPC if data_out + * is too small. + */ + __aligned_u64 data_in; + __aligned_u64 data_out; + __u32 repeat; + __u32 duration; + __u32 ctx_size_in; /* input: len of ctx_in */ + __u32 ctx_size_out; /* input/output: len of ctx_out + * returns ENOSPC if ctx_out + * is too small. + */ + __aligned_u64 ctx_in; + __aligned_u64 ctx_out; + __u32 flags; + __u32 cpu; + } test; + + struct { /* anonymous struct used by BPF_*_GET_*_ID */ + union { + __u32 start_id; + __u32 prog_id; + __u32 map_id; + __u32 btf_id; + __u32 link_id; + }; + __u32 next_id; + __u32 open_flags; + }; + + struct { /* anonymous struct used by BPF_OBJ_GET_INFO_BY_FD */ + __u32 bpf_fd; + __u32 info_len; + __aligned_u64 info; + } info; + + struct { /* anonymous struct used by BPF_PROG_QUERY command */ + __u32 target_fd; /* container object to query */ + __u32 attach_type; + __u32 query_flags; + __u32 attach_flags; + __aligned_u64 prog_ids; + __u32 prog_cnt; + } query; + + struct { /* anonymous struct used by BPF_RAW_TRACEPOINT_OPEN command */ + __u64 name; + __u32 prog_fd; + } raw_tracepoint; + + struct { /* anonymous struct for BPF_BTF_LOAD */ + __aligned_u64 btf; + __aligned_u64 btf_log_buf; + __u32 btf_size; + __u32 btf_log_size; + __u32 btf_log_level; + }; + + struct { + __u32 pid; /* input: pid */ + __u32 fd; /* input: fd */ + __u32 flags; /* input: flags */ + __u32 buf_len; /* input/output: buf len */ + __aligned_u64 buf; /* input/output: + * tp_name for tracepoint + * symbol for kprobe + * filename for uprobe + */ + __u32 prog_id; /* output: prod_id */ + __u32 fd_type; /* output: BPF_FD_TYPE_* */ + __u64 probe_offset; /* output: probe_offset */ + __u64 probe_addr; /* output: probe_addr */ + } task_fd_query; + + struct { /* struct used by BPF_LINK_CREATE command */ + __u32 prog_fd; /* eBPF program to attach */ + union { + __u32 target_fd; /* object to attach to */ + __u32 target_ifindex; /* target ifindex */ + }; + __u32 attach_type; /* attach type */ + __u32 flags; /* extra flags */ + union { + __u32 target_btf_id; /* btf_id of target to attach to */ + struct { + __aligned_u64 iter_info; /* extra bpf_iter_link_info */ + __u32 iter_info_len; /* iter_info length */ + }; + }; + } link_create; + + struct { /* struct used by BPF_LINK_UPDATE command */ + __u32 link_fd; /* link fd */ + /* new program fd to update link with */ + __u32 new_prog_fd; + __u32 flags; /* extra flags */ + /* expected link's program fd; is specified only if + * BPF_F_REPLACE flag is set in flags */ + __u32 old_prog_fd; + } link_update; + + struct { + __u32 link_fd; + } link_detach; + + struct { /* struct used by BPF_ENABLE_STATS command */ + __u32 type; + } enable_stats; + + struct { /* struct used by BPF_ITER_CREATE command */ + __u32 link_fd; + __u32 flags; + } iter_create; + + struct { /* struct used by BPF_PROG_BIND_MAP command */ + __u32 prog_fd; + __u32 map_fd; + __u32 flags; /* extra flags */ + } prog_bind_map; + +} __attribute__((aligned(8))); + +/* The description below is an attempt at providing documentation to eBPF + * developers about the multiple available eBPF helper functions. It can be + * parsed and used to produce a manual page. The workflow is the following, + * and requires the rst2man utility: + * + * $ ./scripts/bpf_helpers_doc.py \ + * --filename include/uapi/linux/bpf.h > /tmp/bpf-helpers.rst + * $ rst2man /tmp/bpf-helpers.rst > /tmp/bpf-helpers.7 + * $ man /tmp/bpf-helpers.7 + * + * Note that in order to produce this external documentation, some RST + * formatting is used in the descriptions to get "bold" and "italics" in + * manual pages. Also note that the few trailing white spaces are + * intentional, removing them would break paragraphs for rst2man. + * + * Start of BPF helper function descriptions: + * + * void *bpf_map_lookup_elem(struct bpf_map *map, const void *key) + * Description + * Perform a lookup in *map* for an entry associated to *key*. + * Return + * Map value associated to *key*, or **NULL** if no entry was + * found. + * + * long bpf_map_update_elem(struct bpf_map *map, const void *key, const void *value, u64 flags) + * Description + * Add or update the value of the entry associated to *key* in + * *map* with *value*. *flags* is one of: + * + * **BPF_NOEXIST** + * The entry for *key* must not exist in the map. + * **BPF_EXIST** + * The entry for *key* must already exist in the map. + * **BPF_ANY** + * No condition on the existence of the entry for *key*. + * + * Flag value **BPF_NOEXIST** cannot be used for maps of types + * **BPF_MAP_TYPE_ARRAY** or **BPF_MAP_TYPE_PERCPU_ARRAY** (all + * elements always exist), the helper would return an error. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_map_delete_elem(struct bpf_map *map, const void *key) + * Description + * Delete entry with *key* from *map*. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_probe_read(void *dst, u32 size, const void *unsafe_ptr) + * Description + * For tracing programs, safely attempt to read *size* bytes from + * kernel space address *unsafe_ptr* and store the data in *dst*. + * + * Generally, use **bpf_probe_read_user**\ () or + * **bpf_probe_read_kernel**\ () instead. + * Return + * 0 on success, or a negative error in case of failure. + * + * u64 bpf_ktime_get_ns(void) + * Description + * Return the time elapsed since system boot, in nanoseconds. + * Does not include time the system was suspended. + * See: **clock_gettime**\ (**CLOCK_MONOTONIC**) + * Return + * Current *ktime*. + * + * long bpf_trace_printk(const char *fmt, u32 fmt_size, ...) + * Description + * This helper is a "printk()-like" facility for debugging. It + * prints a message defined by format *fmt* (of size *fmt_size*) + * to file *\/sys/kernel/debug/tracing/trace* from DebugFS, if + * available. It can take up to three additional **u64** + * arguments (as an eBPF helpers, the total number of arguments is + * limited to five). + * + * Each time the helper is called, it appends a line to the trace. + * Lines are discarded while *\/sys/kernel/debug/tracing/trace* is + * open, use *\/sys/kernel/debug/tracing/trace_pipe* to avoid this. + * The format of the trace is customizable, and the exact output + * one will get depends on the options set in + * *\/sys/kernel/debug/tracing/trace_options* (see also the + * *README* file under the same directory). However, it usually + * defaults to something like: + * + * :: + * + * telnet-470 [001] .N.. 419421.045894: 0x00000001: + * + * In the above: + * + * * ``telnet`` is the name of the current task. + * * ``470`` is the PID of the current task. + * * ``001`` is the CPU number on which the task is + * running. + * * In ``.N..``, each character refers to a set of + * options (whether irqs are enabled, scheduling + * options, whether hard/softirqs are running, level of + * preempt_disabled respectively). **N** means that + * **TIF_NEED_RESCHED** and **PREEMPT_NEED_RESCHED** + * are set. + * * ``419421.045894`` is a timestamp. + * * ``0x00000001`` is a fake value used by BPF for the + * instruction pointer register. + * * ```` is the message formatted with + * *fmt*. + * + * The conversion specifiers supported by *fmt* are similar, but + * more limited than for printk(). They are **%d**, **%i**, + * **%u**, **%x**, **%ld**, **%li**, **%lu**, **%lx**, **%lld**, + * **%lli**, **%llu**, **%llx**, **%p**, **%s**. No modifier (size + * of field, padding with zeroes, etc.) is available, and the + * helper will return **-EINVAL** (but print nothing) if it + * encounters an unknown specifier. + * + * Also, note that **bpf_trace_printk**\ () is slow, and should + * only be used for debugging purposes. For this reason, a notice + * block (spanning several lines) is printed to kernel logs and + * states that the helper should not be used "for production use" + * the first time this helper is used (or more precisely, when + * **trace_printk**\ () buffers are allocated). For passing values + * to user space, perf events should be preferred. + * Return + * The number of bytes written to the buffer, or a negative error + * in case of failure. + * + * u32 bpf_get_prandom_u32(void) + * Description + * Get a pseudo-random number. + * + * From a security point of view, this helper uses its own + * pseudo-random internal state, and cannot be used to infer the + * seed of other random functions in the kernel. However, it is + * essential to note that the generator used by the helper is not + * cryptographically secure. + * Return + * A random 32-bit unsigned value. + * + * u32 bpf_get_smp_processor_id(void) + * Description + * Get the SMP (symmetric multiprocessing) processor id. Note that + * all programs run with preemption disabled, which means that the + * SMP processor id is stable during all the execution of the + * program. + * Return + * The SMP id of the processor running the program. + * + * long bpf_skb_store_bytes(struct sk_buff *skb, u32 offset, const void *from, u32 len, u64 flags) + * Description + * Store *len* bytes from address *from* into the packet + * associated to *skb*, at *offset*. *flags* are a combination of + * **BPF_F_RECOMPUTE_CSUM** (automatically recompute the + * checksum for the packet after storing the bytes) and + * **BPF_F_INVALIDATE_HASH** (set *skb*\ **->hash**, *skb*\ + * **->swhash** and *skb*\ **->l4hash** to 0). + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_l3_csum_replace(struct sk_buff *skb, u32 offset, u64 from, u64 to, u64 size) + * Description + * Recompute the layer 3 (e.g. IP) checksum for the packet + * associated to *skb*. Computation is incremental, so the helper + * must know the former value of the header field that was + * modified (*from*), the new value of this field (*to*), and the + * number of bytes (2 or 4) for this field, stored in *size*. + * Alternatively, it is possible to store the difference between + * the previous and the new values of the header field in *to*, by + * setting *from* and *size* to 0. For both methods, *offset* + * indicates the location of the IP checksum within the packet. + * + * This helper works in combination with **bpf_csum_diff**\ (), + * which does not update the checksum in-place, but offers more + * flexibility and can handle sizes larger than 2 or 4 for the + * checksum to update. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_l4_csum_replace(struct sk_buff *skb, u32 offset, u64 from, u64 to, u64 flags) + * Description + * Recompute the layer 4 (e.g. TCP, UDP or ICMP) checksum for the + * packet associated to *skb*. Computation is incremental, so the + * helper must know the former value of the header field that was + * modified (*from*), the new value of this field (*to*), and the + * number of bytes (2 or 4) for this field, stored on the lowest + * four bits of *flags*. Alternatively, it is possible to store + * the difference between the previous and the new values of the + * header field in *to*, by setting *from* and the four lowest + * bits of *flags* to 0. For both methods, *offset* indicates the + * location of the IP checksum within the packet. In addition to + * the size of the field, *flags* can be added (bitwise OR) actual + * flags. With **BPF_F_MARK_MANGLED_0**, a null checksum is left + * untouched (unless **BPF_F_MARK_ENFORCE** is added as well), and + * for updates resulting in a null checksum the value is set to + * **CSUM_MANGLED_0** instead. Flag **BPF_F_PSEUDO_HDR** indicates + * the checksum is to be computed against a pseudo-header. + * + * This helper works in combination with **bpf_csum_diff**\ (), + * which does not update the checksum in-place, but offers more + * flexibility and can handle sizes larger than 2 or 4 for the + * checksum to update. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_tail_call(void *ctx, struct bpf_map *prog_array_map, u32 index) + * Description + * This special helper is used to trigger a "tail call", or in + * other words, to jump into another eBPF program. The same stack + * frame is used (but values on stack and in registers for the + * caller are not accessible to the callee). This mechanism allows + * for program chaining, either for raising the maximum number of + * available eBPF instructions, or to execute given programs in + * conditional blocks. For security reasons, there is an upper + * limit to the number of successive tail calls that can be + * performed. + * + * Upon call of this helper, the program attempts to jump into a + * program referenced at index *index* in *prog_array_map*, a + * special map of type **BPF_MAP_TYPE_PROG_ARRAY**, and passes + * *ctx*, a pointer to the context. + * + * If the call succeeds, the kernel immediately runs the first + * instruction of the new program. This is not a function call, + * and it never returns to the previous program. If the call + * fails, then the helper has no effect, and the caller continues + * to run its subsequent instructions. A call can fail if the + * destination program for the jump does not exist (i.e. *index* + * is superior to the number of entries in *prog_array_map*), or + * if the maximum number of tail calls has been reached for this + * chain of programs. This limit is defined in the kernel by the + * macro **MAX_TAIL_CALL_CNT** (not accessible to user space), + * which is currently set to 32. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_clone_redirect(struct sk_buff *skb, u32 ifindex, u64 flags) + * Description + * Clone and redirect the packet associated to *skb* to another + * net device of index *ifindex*. Both ingress and egress + * interfaces can be used for redirection. The **BPF_F_INGRESS** + * value in *flags* is used to make the distinction (ingress path + * is selected if the flag is present, egress path otherwise). + * This is the only flag supported for now. + * + * In comparison with **bpf_redirect**\ () helper, + * **bpf_clone_redirect**\ () has the associated cost of + * duplicating the packet buffer, but this can be executed out of + * the eBPF program. Conversely, **bpf_redirect**\ () is more + * efficient, but it is handled through an action code where the + * redirection happens only after the eBPF program has returned. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * u64 bpf_get_current_pid_tgid(void) + * Return + * A 64-bit integer containing the current tgid and pid, and + * created as such: + * *current_task*\ **->tgid << 32 \|** + * *current_task*\ **->pid**. + * + * u64 bpf_get_current_uid_gid(void) + * Return + * A 64-bit integer containing the current GID and UID, and + * created as such: *current_gid* **<< 32 \|** *current_uid*. + * + * long bpf_get_current_comm(void *buf, u32 size_of_buf) + * Description + * Copy the **comm** attribute of the current task into *buf* of + * *size_of_buf*. The **comm** attribute contains the name of + * the executable (excluding the path) for the current task. The + * *size_of_buf* must be strictly positive. On success, the + * helper makes sure that the *buf* is NUL-terminated. On failure, + * it is filled with zeroes. + * Return + * 0 on success, or a negative error in case of failure. + * + * u32 bpf_get_cgroup_classid(struct sk_buff *skb) + * Description + * Retrieve the classid for the current task, i.e. for the net_cls + * cgroup to which *skb* belongs. + * + * This helper can be used on TC egress path, but not on ingress. + * + * The net_cls cgroup provides an interface to tag network packets + * based on a user-provided identifier for all traffic coming from + * the tasks belonging to the related cgroup. See also the related + * kernel documentation, available from the Linux sources in file + * *Documentation/admin-guide/cgroup-v1/net_cls.rst*. + * + * The Linux kernel has two versions for cgroups: there are + * cgroups v1 and cgroups v2. Both are available to users, who can + * use a mixture of them, but note that the net_cls cgroup is for + * cgroup v1 only. This makes it incompatible with BPF programs + * run on cgroups, which is a cgroup-v2-only feature (a socket can + * only hold data for one version of cgroups at a time). + * + * This helper is only available is the kernel was compiled with + * the **CONFIG_CGROUP_NET_CLASSID** configuration option set to + * "**y**" or to "**m**". + * Return + * The classid, or 0 for the default unconfigured classid. + * + * long bpf_skb_vlan_push(struct sk_buff *skb, __be16 vlan_proto, u16 vlan_tci) + * Description + * Push a *vlan_tci* (VLAN tag control information) of protocol + * *vlan_proto* to the packet associated to *skb*, then update + * the checksum. Note that if *vlan_proto* is different from + * **ETH_P_8021Q** and **ETH_P_8021AD**, it is considered to + * be **ETH_P_8021Q**. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_skb_vlan_pop(struct sk_buff *skb) + * Description + * Pop a VLAN header from the packet associated to *skb*. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_skb_get_tunnel_key(struct sk_buff *skb, struct bpf_tunnel_key *key, u32 size, u64 flags) + * Description + * Get tunnel metadata. This helper takes a pointer *key* to an + * empty **struct bpf_tunnel_key** of **size**, that will be + * filled with tunnel metadata for the packet associated to *skb*. + * The *flags* can be set to **BPF_F_TUNINFO_IPV6**, which + * indicates that the tunnel is based on IPv6 protocol instead of + * IPv4. + * + * The **struct bpf_tunnel_key** is an object that generalizes the + * principal parameters used by various tunneling protocols into a + * single struct. This way, it can be used to easily make a + * decision based on the contents of the encapsulation header, + * "summarized" in this struct. In particular, it holds the IP + * address of the remote end (IPv4 or IPv6, depending on the case) + * in *key*\ **->remote_ipv4** or *key*\ **->remote_ipv6**. Also, + * this struct exposes the *key*\ **->tunnel_id**, which is + * generally mapped to a VNI (Virtual Network Identifier), making + * it programmable together with the **bpf_skb_set_tunnel_key**\ + * () helper. + * + * Let's imagine that the following code is part of a program + * attached to the TC ingress interface, on one end of a GRE + * tunnel, and is supposed to filter out all messages coming from + * remote ends with IPv4 address other than 10.0.0.1: + * + * :: + * + * int ret; + * struct bpf_tunnel_key key = {}; + * + * ret = bpf_skb_get_tunnel_key(skb, &key, sizeof(key), 0); + * if (ret < 0) + * return TC_ACT_SHOT; // drop packet + * + * if (key.remote_ipv4 != 0x0a000001) + * return TC_ACT_SHOT; // drop packet + * + * return TC_ACT_OK; // accept packet + * + * This interface can also be used with all encapsulation devices + * that can operate in "collect metadata" mode: instead of having + * one network device per specific configuration, the "collect + * metadata" mode only requires a single device where the + * configuration can be extracted from this helper. + * + * This can be used together with various tunnels such as VXLan, + * Geneve, GRE or IP in IP (IPIP). + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_skb_set_tunnel_key(struct sk_buff *skb, struct bpf_tunnel_key *key, u32 size, u64 flags) + * Description + * Populate tunnel metadata for packet associated to *skb.* The + * tunnel metadata is set to the contents of *key*, of *size*. The + * *flags* can be set to a combination of the following values: + * + * **BPF_F_TUNINFO_IPV6** + * Indicate that the tunnel is based on IPv6 protocol + * instead of IPv4. + * **BPF_F_ZERO_CSUM_TX** + * For IPv4 packets, add a flag to tunnel metadata + * indicating that checksum computation should be skipped + * and checksum set to zeroes. + * **BPF_F_DONT_FRAGMENT** + * Add a flag to tunnel metadata indicating that the + * packet should not be fragmented. + * **BPF_F_SEQ_NUMBER** + * Add a flag to tunnel metadata indicating that a + * sequence number should be added to tunnel header before + * sending the packet. This flag was added for GRE + * encapsulation, but might be used with other protocols + * as well in the future. + * + * Here is a typical usage on the transmit path: + * + * :: + * + * struct bpf_tunnel_key key; + * populate key ... + * bpf_skb_set_tunnel_key(skb, &key, sizeof(key), 0); + * bpf_clone_redirect(skb, vxlan_dev_ifindex, 0); + * + * See also the description of the **bpf_skb_get_tunnel_key**\ () + * helper for additional information. + * Return + * 0 on success, or a negative error in case of failure. + * + * u64 bpf_perf_event_read(struct bpf_map *map, u64 flags) + * Description + * Read the value of a perf event counter. This helper relies on a + * *map* of type **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. The nature of + * the perf event counter is selected when *map* is updated with + * perf event file descriptors. The *map* is an array whose size + * is the number of available CPUs, and each cell contains a value + * relative to one CPU. The value to retrieve is indicated by + * *flags*, that contains the index of the CPU to look up, masked + * with **BPF_F_INDEX_MASK**. Alternatively, *flags* can be set to + * **BPF_F_CURRENT_CPU** to indicate that the value for the + * current CPU should be retrieved. + * + * Note that before Linux 4.13, only hardware perf event can be + * retrieved. + * + * Also, be aware that the newer helper + * **bpf_perf_event_read_value**\ () is recommended over + * **bpf_perf_event_read**\ () in general. The latter has some ABI + * quirks where error and counter value are used as a return code + * (which is wrong to do since ranges may overlap). This issue is + * fixed with **bpf_perf_event_read_value**\ (), which at the same + * time provides more features over the **bpf_perf_event_read**\ + * () interface. Please refer to the description of + * **bpf_perf_event_read_value**\ () for details. + * Return + * The value of the perf event counter read from the map, or a + * negative error code in case of failure. + * + * long bpf_redirect(u32 ifindex, u64 flags) + * Description + * Redirect the packet to another net device of index *ifindex*. + * This helper is somewhat similar to **bpf_clone_redirect**\ + * (), except that the packet is not cloned, which provides + * increased performance. + * + * Except for XDP, both ingress and egress interfaces can be used + * for redirection. The **BPF_F_INGRESS** value in *flags* is used + * to make the distinction (ingress path is selected if the flag + * is present, egress path otherwise). Currently, XDP only + * supports redirection to the egress interface, and accepts no + * flag at all. + * + * The same effect can also be attained with the more generic + * **bpf_redirect_map**\ (), which uses a BPF map to store the + * redirect target instead of providing it directly to the helper. + * Return + * For XDP, the helper returns **XDP_REDIRECT** on success or + * **XDP_ABORTED** on error. For other program types, the values + * are **TC_ACT_REDIRECT** on success or **TC_ACT_SHOT** on + * error. + * + * u32 bpf_get_route_realm(struct sk_buff *skb) + * Description + * Retrieve the realm or the route, that is to say the + * **tclassid** field of the destination for the *skb*. The + * identifier retrieved is a user-provided tag, similar to the + * one used with the net_cls cgroup (see description for + * **bpf_get_cgroup_classid**\ () helper), but here this tag is + * held by a route (a destination entry), not by a task. + * + * Retrieving this identifier works with the clsact TC egress hook + * (see also **tc-bpf(8)**), or alternatively on conventional + * classful egress qdiscs, but not on TC ingress path. In case of + * clsact TC egress hook, this has the advantage that, internally, + * the destination entry has not been dropped yet in the transmit + * path. Therefore, the destination entry does not need to be + * artificially held via **netif_keep_dst**\ () for a classful + * qdisc until the *skb* is freed. + * + * This helper is available only if the kernel was compiled with + * **CONFIG_IP_ROUTE_CLASSID** configuration option. + * Return + * The realm of the route for the packet associated to *skb*, or 0 + * if none was found. + * + * long bpf_perf_event_output(void *ctx, struct bpf_map *map, u64 flags, void *data, u64 size) + * Description + * Write raw *data* blob into a special BPF perf event held by + * *map* of type **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. This perf + * event must have the following attributes: **PERF_SAMPLE_RAW** + * as **sample_type**, **PERF_TYPE_SOFTWARE** as **type**, and + * **PERF_COUNT_SW_BPF_OUTPUT** as **config**. + * + * The *flags* are used to indicate the index in *map* for which + * the value must be put, masked with **BPF_F_INDEX_MASK**. + * Alternatively, *flags* can be set to **BPF_F_CURRENT_CPU** + * to indicate that the index of the current CPU core should be + * used. + * + * The value to write, of *size*, is passed through eBPF stack and + * pointed by *data*. + * + * The context of the program *ctx* needs also be passed to the + * helper. + * + * On user space, a program willing to read the values needs to + * call **perf_event_open**\ () on the perf event (either for + * one or for all CPUs) and to store the file descriptor into the + * *map*. This must be done before the eBPF program can send data + * into it. An example is available in file + * *samples/bpf/trace_output_user.c* in the Linux kernel source + * tree (the eBPF program counterpart is in + * *samples/bpf/trace_output_kern.c*). + * + * **bpf_perf_event_output**\ () achieves better performance + * than **bpf_trace_printk**\ () for sharing data with user + * space, and is much better suitable for streaming data from eBPF + * programs. + * + * Note that this helper is not restricted to tracing use cases + * and can be used with programs attached to TC or XDP as well, + * where it allows for passing data to user space listeners. Data + * can be: + * + * * Only custom structs, + * * Only the packet payload, or + * * A combination of both. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_skb_load_bytes(const void *skb, u32 offset, void *to, u32 len) + * Description + * This helper was provided as an easy way to load data from a + * packet. It can be used to load *len* bytes from *offset* from + * the packet associated to *skb*, into the buffer pointed by + * *to*. + * + * Since Linux 4.7, usage of this helper has mostly been replaced + * by "direct packet access", enabling packet data to be + * manipulated with *skb*\ **->data** and *skb*\ **->data_end** + * pointing respectively to the first byte of packet data and to + * the byte after the last byte of packet data. However, it + * remains useful if one wishes to read large quantities of data + * at once from a packet into the eBPF stack. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_get_stackid(void *ctx, struct bpf_map *map, u64 flags) + * Description + * Walk a user or a kernel stack and return its id. To achieve + * this, the helper needs *ctx*, which is a pointer to the context + * on which the tracing program is executed, and a pointer to a + * *map* of type **BPF_MAP_TYPE_STACK_TRACE**. + * + * The last argument, *flags*, holds the number of stack frames to + * skip (from 0 to 255), masked with + * **BPF_F_SKIP_FIELD_MASK**. The next bits can be used to set + * a combination of the following flags: + * + * **BPF_F_USER_STACK** + * Collect a user space stack instead of a kernel stack. + * **BPF_F_FAST_STACK_CMP** + * Compare stacks by hash only. + * **BPF_F_REUSE_STACKID** + * If two different stacks hash into the same *stackid*, + * discard the old one. + * + * The stack id retrieved is a 32 bit long integer handle which + * can be further combined with other data (including other stack + * ids) and used as a key into maps. This can be useful for + * generating a variety of graphs (such as flame graphs or off-cpu + * graphs). + * + * For walking a stack, this helper is an improvement over + * **bpf_probe_read**\ (), which can be used with unrolled loops + * but is not efficient and consumes a lot of eBPF instructions. + * Instead, **bpf_get_stackid**\ () can collect up to + * **PERF_MAX_STACK_DEPTH** both kernel and user frames. Note that + * this limit can be controlled with the **sysctl** program, and + * that it should be manually increased in order to profile long + * user stacks (such as stacks for Java programs). To do so, use: + * + * :: + * + * # sysctl kernel.perf_event_max_stack= + * Return + * The positive or null stack id on success, or a negative error + * in case of failure. + * + * s64 bpf_csum_diff(__be32 *from, u32 from_size, __be32 *to, u32 to_size, __wsum seed) + * Description + * Compute a checksum difference, from the raw buffer pointed by + * *from*, of length *from_size* (that must be a multiple of 4), + * towards the raw buffer pointed by *to*, of size *to_size* + * (same remark). An optional *seed* can be added to the value + * (this can be cascaded, the seed may come from a previous call + * to the helper). + * + * This is flexible enough to be used in several ways: + * + * * With *from_size* == 0, *to_size* > 0 and *seed* set to + * checksum, it can be used when pushing new data. + * * With *from_size* > 0, *to_size* == 0 and *seed* set to + * checksum, it can be used when removing data from a packet. + * * With *from_size* > 0, *to_size* > 0 and *seed* set to 0, it + * can be used to compute a diff. Note that *from_size* and + * *to_size* do not need to be equal. + * + * This helper can be used in combination with + * **bpf_l3_csum_replace**\ () and **bpf_l4_csum_replace**\ (), to + * which one can feed in the difference computed with + * **bpf_csum_diff**\ (). + * Return + * The checksum result, or a negative error code in case of + * failure. + * + * long bpf_skb_get_tunnel_opt(struct sk_buff *skb, void *opt, u32 size) + * Description + * Retrieve tunnel options metadata for the packet associated to + * *skb*, and store the raw tunnel option data to the buffer *opt* + * of *size*. + * + * This helper can be used with encapsulation devices that can + * operate in "collect metadata" mode (please refer to the related + * note in the description of **bpf_skb_get_tunnel_key**\ () for + * more details). A particular example where this can be used is + * in combination with the Geneve encapsulation protocol, where it + * allows for pushing (with **bpf_skb_get_tunnel_opt**\ () helper) + * and retrieving arbitrary TLVs (Type-Length-Value headers) from + * the eBPF program. This allows for full customization of these + * headers. + * Return + * The size of the option data retrieved. + * + * long bpf_skb_set_tunnel_opt(struct sk_buff *skb, void *opt, u32 size) + * Description + * Set tunnel options metadata for the packet associated to *skb* + * to the option data contained in the raw buffer *opt* of *size*. + * + * See also the description of the **bpf_skb_get_tunnel_opt**\ () + * helper for additional information. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_skb_change_proto(struct sk_buff *skb, __be16 proto, u64 flags) + * Description + * Change the protocol of the *skb* to *proto*. Currently + * supported are transition from IPv4 to IPv6, and from IPv6 to + * IPv4. The helper takes care of the groundwork for the + * transition, including resizing the socket buffer. The eBPF + * program is expected to fill the new headers, if any, via + * **skb_store_bytes**\ () and to recompute the checksums with + * **bpf_l3_csum_replace**\ () and **bpf_l4_csum_replace**\ + * (). The main case for this helper is to perform NAT64 + * operations out of an eBPF program. + * + * Internally, the GSO type is marked as dodgy so that headers are + * checked and segments are recalculated by the GSO/GRO engine. + * The size for GSO target is adapted as well. + * + * All values for *flags* are reserved for future usage, and must + * be left at zero. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_skb_change_type(struct sk_buff *skb, u32 type) + * Description + * Change the packet type for the packet associated to *skb*. This + * comes down to setting *skb*\ **->pkt_type** to *type*, except + * the eBPF program does not have a write access to *skb*\ + * **->pkt_type** beside this helper. Using a helper here allows + * for graceful handling of errors. + * + * The major use case is to change incoming *skb*s to + * **PACKET_HOST** in a programmatic way instead of having to + * recirculate via **redirect**\ (..., **BPF_F_INGRESS**), for + * example. + * + * Note that *type* only allows certain values. At this time, they + * are: + * + * **PACKET_HOST** + * Packet is for us. + * **PACKET_BROADCAST** + * Send packet to all. + * **PACKET_MULTICAST** + * Send packet to group. + * **PACKET_OTHERHOST** + * Send packet to someone else. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_skb_under_cgroup(struct sk_buff *skb, struct bpf_map *map, u32 index) + * Description + * Check whether *skb* is a descendant of the cgroup2 held by + * *map* of type **BPF_MAP_TYPE_CGROUP_ARRAY**, at *index*. + * Return + * The return value depends on the result of the test, and can be: + * + * * 0, if the *skb* failed the cgroup2 descendant test. + * * 1, if the *skb* succeeded the cgroup2 descendant test. + * * A negative error code, if an error occurred. + * + * u32 bpf_get_hash_recalc(struct sk_buff *skb) + * Description + * Retrieve the hash of the packet, *skb*\ **->hash**. If it is + * not set, in particular if the hash was cleared due to mangling, + * recompute this hash. Later accesses to the hash can be done + * directly with *skb*\ **->hash**. + * + * Calling **bpf_set_hash_invalid**\ (), changing a packet + * prototype with **bpf_skb_change_proto**\ (), or calling + * **bpf_skb_store_bytes**\ () with the + * **BPF_F_INVALIDATE_HASH** are actions susceptible to clear + * the hash and to trigger a new computation for the next call to + * **bpf_get_hash_recalc**\ (). + * Return + * The 32-bit hash. + * + * u64 bpf_get_current_task(void) + * Return + * A pointer to the current task struct. + * + * long bpf_probe_write_user(void *dst, const void *src, u32 len) + * Description + * Attempt in a safe way to write *len* bytes from the buffer + * *src* to *dst* in memory. It only works for threads that are in + * user context, and *dst* must be a valid user space address. + * + * This helper should not be used to implement any kind of + * security mechanism because of TOC-TOU attacks, but rather to + * debug, divert, and manipulate execution of semi-cooperative + * processes. + * + * Keep in mind that this feature is meant for experiments, and it + * has a risk of crashing the system and running programs. + * Therefore, when an eBPF program using this helper is attached, + * a warning including PID and process name is printed to kernel + * logs. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_current_task_under_cgroup(struct bpf_map *map, u32 index) + * Description + * Check whether the probe is being run is the context of a given + * subset of the cgroup2 hierarchy. The cgroup2 to test is held by + * *map* of type **BPF_MAP_TYPE_CGROUP_ARRAY**, at *index*. + * Return + * The return value depends on the result of the test, and can be: + * + * * 0, if current task belongs to the cgroup2. + * * 1, if current task does not belong to the cgroup2. + * * A negative error code, if an error occurred. + * + * long bpf_skb_change_tail(struct sk_buff *skb, u32 len, u64 flags) + * Description + * Resize (trim or grow) the packet associated to *skb* to the + * new *len*. The *flags* are reserved for future usage, and must + * be left at zero. + * + * The basic idea is that the helper performs the needed work to + * change the size of the packet, then the eBPF program rewrites + * the rest via helpers like **bpf_skb_store_bytes**\ (), + * **bpf_l3_csum_replace**\ (), **bpf_l3_csum_replace**\ () + * and others. This helper is a slow path utility intended for + * replies with control messages. And because it is targeted for + * slow path, the helper itself can afford to be slow: it + * implicitly linearizes, unclones and drops offloads from the + * *skb*. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_skb_pull_data(struct sk_buff *skb, u32 len) + * Description + * Pull in non-linear data in case the *skb* is non-linear and not + * all of *len* are part of the linear section. Make *len* bytes + * from *skb* readable and writable. If a zero value is passed for + * *len*, then the whole length of the *skb* is pulled. + * + * This helper is only needed for reading and writing with direct + * packet access. + * + * For direct packet access, testing that offsets to access + * are within packet boundaries (test on *skb*\ **->data_end**) is + * susceptible to fail if offsets are invalid, or if the requested + * data is in non-linear parts of the *skb*. On failure the + * program can just bail out, or in the case of a non-linear + * buffer, use a helper to make the data available. The + * **bpf_skb_load_bytes**\ () helper is a first solution to access + * the data. Another one consists in using **bpf_skb_pull_data** + * to pull in once the non-linear parts, then retesting and + * eventually access the data. + * + * At the same time, this also makes sure the *skb* is uncloned, + * which is a necessary condition for direct write. As this needs + * to be an invariant for the write part only, the verifier + * detects writes and adds a prologue that is calling + * **bpf_skb_pull_data()** to effectively unclone the *skb* from + * the very beginning in case it is indeed cloned. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * s64 bpf_csum_update(struct sk_buff *skb, __wsum csum) + * Description + * Add the checksum *csum* into *skb*\ **->csum** in case the + * driver has supplied a checksum for the entire packet into that + * field. Return an error otherwise. This helper is intended to be + * used in combination with **bpf_csum_diff**\ (), in particular + * when the checksum needs to be updated after data has been + * written into the packet through direct packet access. + * Return + * The checksum on success, or a negative error code in case of + * failure. + * + * void bpf_set_hash_invalid(struct sk_buff *skb) + * Description + * Invalidate the current *skb*\ **->hash**. It can be used after + * mangling on headers through direct packet access, in order to + * indicate that the hash is outdated and to trigger a + * recalculation the next time the kernel tries to access this + * hash or when the **bpf_get_hash_recalc**\ () helper is called. + * + * long bpf_get_numa_node_id(void) + * Description + * Return the id of the current NUMA node. The primary use case + * for this helper is the selection of sockets for the local NUMA + * node, when the program is attached to sockets using the + * **SO_ATTACH_REUSEPORT_EBPF** option (see also **socket(7)**), + * but the helper is also available to other eBPF program types, + * similarly to **bpf_get_smp_processor_id**\ (). + * Return + * The id of current NUMA node. + * + * long bpf_skb_change_head(struct sk_buff *skb, u32 len, u64 flags) + * Description + * Grows headroom of packet associated to *skb* and adjusts the + * offset of the MAC header accordingly, adding *len* bytes of + * space. It automatically extends and reallocates memory as + * required. + * + * This helper can be used on a layer 3 *skb* to push a MAC header + * for redirection into a layer 2 device. + * + * All values for *flags* are reserved for future usage, and must + * be left at zero. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_xdp_adjust_head(struct xdp_buff *xdp_md, int delta) + * Description + * Adjust (move) *xdp_md*\ **->data** by *delta* bytes. Note that + * it is possible to use a negative value for *delta*. This helper + * can be used to prepare the packet for pushing or popping + * headers. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_probe_read_str(void *dst, u32 size, const void *unsafe_ptr) + * Description + * Copy a NUL terminated string from an unsafe kernel address + * *unsafe_ptr* to *dst*. See **bpf_probe_read_kernel_str**\ () for + * more details. + * + * Generally, use **bpf_probe_read_user_str**\ () or + * **bpf_probe_read_kernel_str**\ () instead. + * Return + * On success, the strictly positive length of the string, + * including the trailing NUL character. On error, a negative + * value. + * + * u64 bpf_get_socket_cookie(struct sk_buff *skb) + * Description + * If the **struct sk_buff** pointed by *skb* has a known socket, + * retrieve the cookie (generated by the kernel) of this socket. + * If no cookie has been set yet, generate a new cookie. Once + * generated, the socket cookie remains stable for the life of the + * socket. This helper can be useful for monitoring per socket + * networking traffic statistics as it provides a global socket + * identifier that can be assumed unique. + * Return + * A 8-byte long non-decreasing number on success, or 0 if the + * socket field is missing inside *skb*. + * + * u64 bpf_get_socket_cookie(struct bpf_sock_addr *ctx) + * Description + * Equivalent to bpf_get_socket_cookie() helper that accepts + * *skb*, but gets socket from **struct bpf_sock_addr** context. + * Return + * A 8-byte long non-decreasing number. + * + * u64 bpf_get_socket_cookie(struct bpf_sock_ops *ctx) + * Description + * Equivalent to **bpf_get_socket_cookie**\ () helper that accepts + * *skb*, but gets socket from **struct bpf_sock_ops** context. + * Return + * A 8-byte long non-decreasing number. + * + * u32 bpf_get_socket_uid(struct sk_buff *skb) + * Return + * The owner UID of the socket associated to *skb*. If the socket + * is **NULL**, or if it is not a full socket (i.e. if it is a + * time-wait or a request socket instead), **overflowuid** value + * is returned (note that **overflowuid** might also be the actual + * UID value for the socket). + * + * long bpf_set_hash(struct sk_buff *skb, u32 hash) + * Description + * Set the full hash for *skb* (set the field *skb*\ **->hash**) + * to value *hash*. + * Return + * 0 + * + * long bpf_setsockopt(void *bpf_socket, int level, int optname, void *optval, int optlen) + * Description + * Emulate a call to **setsockopt()** on the socket associated to + * *bpf_socket*, which must be a full socket. The *level* at + * which the option resides and the name *optname* of the option + * must be specified, see **setsockopt(2)** for more information. + * The option value of length *optlen* is pointed by *optval*. + * + * *bpf_socket* should be one of the following: + * + * * **struct bpf_sock_ops** for **BPF_PROG_TYPE_SOCK_OPS**. + * * **struct bpf_sock_addr** for **BPF_CGROUP_INET4_CONNECT** + * and **BPF_CGROUP_INET6_CONNECT**. + * + * This helper actually implements a subset of **setsockopt()**. + * It supports the following *level*\ s: + * + * * **SOL_SOCKET**, which supports the following *optname*\ s: + * **SO_RCVBUF**, **SO_SNDBUF**, **SO_MAX_PACING_RATE**, + * **SO_PRIORITY**, **SO_RCVLOWAT**, **SO_MARK**, + * **SO_BINDTODEVICE**, **SO_KEEPALIVE**. + * * **IPPROTO_TCP**, which supports the following *optname*\ s: + * **TCP_CONGESTION**, **TCP_BPF_IW**, + * **TCP_BPF_SNDCWND_CLAMP**, **TCP_SAVE_SYN**, + * **TCP_KEEPIDLE**, **TCP_KEEPINTVL**, **TCP_KEEPCNT**, + * **TCP_SYNCNT**, **TCP_USER_TIMEOUT**, **TCP_NOTSENT_LOWAT**. + * * **IPPROTO_IP**, which supports *optname* **IP_TOS**. + * * **IPPROTO_IPV6**, which supports *optname* **IPV6_TCLASS**. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_skb_adjust_room(struct sk_buff *skb, s32 len_diff, u32 mode, u64 flags) + * Description + * Grow or shrink the room for data in the packet associated to + * *skb* by *len_diff*, and according to the selected *mode*. + * + * By default, the helper will reset any offloaded checksum + * indicator of the skb to CHECKSUM_NONE. This can be avoided + * by the following flag: + * + * * **BPF_F_ADJ_ROOM_NO_CSUM_RESET**: Do not reset offloaded + * checksum data of the skb to CHECKSUM_NONE. + * + * There are two supported modes at this time: + * + * * **BPF_ADJ_ROOM_MAC**: Adjust room at the mac layer + * (room space is added or removed below the layer 2 header). + * + * * **BPF_ADJ_ROOM_NET**: Adjust room at the network layer + * (room space is added or removed below the layer 3 header). + * + * The following flags are supported at this time: + * + * * **BPF_F_ADJ_ROOM_FIXED_GSO**: Do not adjust gso_size. + * Adjusting mss in this way is not allowed for datagrams. + * + * * **BPF_F_ADJ_ROOM_ENCAP_L3_IPV4**, + * **BPF_F_ADJ_ROOM_ENCAP_L3_IPV6**: + * Any new space is reserved to hold a tunnel header. + * Configure skb offsets and other fields accordingly. + * + * * **BPF_F_ADJ_ROOM_ENCAP_L4_GRE**, + * **BPF_F_ADJ_ROOM_ENCAP_L4_UDP**: + * Use with ENCAP_L3 flags to further specify the tunnel type. + * + * * **BPF_F_ADJ_ROOM_ENCAP_L2**\ (*len*): + * Use with ENCAP_L3/L4 flags to further specify the tunnel + * type; *len* is the length of the inner MAC header. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_redirect_map(struct bpf_map *map, u32 key, u64 flags) + * Description + * Redirect the packet to the endpoint referenced by *map* at + * index *key*. Depending on its type, this *map* can contain + * references to net devices (for forwarding packets through other + * ports), or to CPUs (for redirecting XDP frames to another CPU; + * but this is only implemented for native XDP (with driver + * support) as of this writing). + * + * The lower two bits of *flags* are used as the return code if + * the map lookup fails. This is so that the return value can be + * one of the XDP program return codes up to **XDP_TX**, as chosen + * by the caller. Any higher bits in the *flags* argument must be + * unset. + * + * See also **bpf_redirect**\ (), which only supports redirecting + * to an ifindex, but doesn't require a map to do so. + * Return + * **XDP_REDIRECT** on success, or the value of the two lower bits + * of the *flags* argument on error. + * + * long bpf_sk_redirect_map(struct sk_buff *skb, struct bpf_map *map, u32 key, u64 flags) + * Description + * Redirect the packet to the socket referenced by *map* (of type + * **BPF_MAP_TYPE_SOCKMAP**) at index *key*. Both ingress and + * egress interfaces can be used for redirection. The + * **BPF_F_INGRESS** value in *flags* is used to make the + * distinction (ingress path is selected if the flag is present, + * egress path otherwise). This is the only flag supported for now. + * Return + * **SK_PASS** on success, or **SK_DROP** on error. + * + * long bpf_sock_map_update(struct bpf_sock_ops *skops, struct bpf_map *map, void *key, u64 flags) + * Description + * Add an entry to, or update a *map* referencing sockets. The + * *skops* is used as a new value for the entry associated to + * *key*. *flags* is one of: + * + * **BPF_NOEXIST** + * The entry for *key* must not exist in the map. + * **BPF_EXIST** + * The entry for *key* must already exist in the map. + * **BPF_ANY** + * No condition on the existence of the entry for *key*. + * + * If the *map* has eBPF programs (parser and verdict), those will + * be inherited by the socket being added. If the socket is + * already attached to eBPF programs, this results in an error. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_xdp_adjust_meta(struct xdp_buff *xdp_md, int delta) + * Description + * Adjust the address pointed by *xdp_md*\ **->data_meta** by + * *delta* (which can be positive or negative). Note that this + * operation modifies the address stored in *xdp_md*\ **->data**, + * so the latter must be loaded only after the helper has been + * called. + * + * The use of *xdp_md*\ **->data_meta** is optional and programs + * are not required to use it. The rationale is that when the + * packet is processed with XDP (e.g. as DoS filter), it is + * possible to push further meta data along with it before passing + * to the stack, and to give the guarantee that an ingress eBPF + * program attached as a TC classifier on the same device can pick + * this up for further post-processing. Since TC works with socket + * buffers, it remains possible to set from XDP the **mark** or + * **priority** pointers, or other pointers for the socket buffer. + * Having this scratch space generic and programmable allows for + * more flexibility as the user is free to store whatever meta + * data they need. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_perf_event_read_value(struct bpf_map *map, u64 flags, struct bpf_perf_event_value *buf, u32 buf_size) + * Description + * Read the value of a perf event counter, and store it into *buf* + * of size *buf_size*. This helper relies on a *map* of type + * **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. The nature of the perf event + * counter is selected when *map* is updated with perf event file + * descriptors. The *map* is an array whose size is the number of + * available CPUs, and each cell contains a value relative to one + * CPU. The value to retrieve is indicated by *flags*, that + * contains the index of the CPU to look up, masked with + * **BPF_F_INDEX_MASK**. Alternatively, *flags* can be set to + * **BPF_F_CURRENT_CPU** to indicate that the value for the + * current CPU should be retrieved. + * + * This helper behaves in a way close to + * **bpf_perf_event_read**\ () helper, save that instead of + * just returning the value observed, it fills the *buf* + * structure. This allows for additional data to be retrieved: in + * particular, the enabled and running times (in *buf*\ + * **->enabled** and *buf*\ **->running**, respectively) are + * copied. In general, **bpf_perf_event_read_value**\ () is + * recommended over **bpf_perf_event_read**\ (), which has some + * ABI issues and provides fewer functionalities. + * + * These values are interesting, because hardware PMU (Performance + * Monitoring Unit) counters are limited resources. When there are + * more PMU based perf events opened than available counters, + * kernel will multiplex these events so each event gets certain + * percentage (but not all) of the PMU time. In case that + * multiplexing happens, the number of samples or counter value + * will not reflect the case compared to when no multiplexing + * occurs. This makes comparison between different runs difficult. + * Typically, the counter value should be normalized before + * comparing to other experiments. The usual normalization is done + * as follows. + * + * :: + * + * normalized_counter = counter * t_enabled / t_running + * + * Where t_enabled is the time enabled for event and t_running is + * the time running for event since last normalization. The + * enabled and running times are accumulated since the perf event + * open. To achieve scaling factor between two invocations of an + * eBPF program, users can use CPU id as the key (which is + * typical for perf array usage model) to remember the previous + * value and do the calculation inside the eBPF program. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_perf_prog_read_value(struct bpf_perf_event_data *ctx, struct bpf_perf_event_value *buf, u32 buf_size) + * Description + * For en eBPF program attached to a perf event, retrieve the + * value of the event counter associated to *ctx* and store it in + * the structure pointed by *buf* and of size *buf_size*. Enabled + * and running times are also stored in the structure (see + * description of helper **bpf_perf_event_read_value**\ () for + * more details). + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_getsockopt(void *bpf_socket, int level, int optname, void *optval, int optlen) + * Description + * Emulate a call to **getsockopt()** on the socket associated to + * *bpf_socket*, which must be a full socket. The *level* at + * which the option resides and the name *optname* of the option + * must be specified, see **getsockopt(2)** for more information. + * The retrieved value is stored in the structure pointed by + * *opval* and of length *optlen*. + * + * *bpf_socket* should be one of the following: + * + * * **struct bpf_sock_ops** for **BPF_PROG_TYPE_SOCK_OPS**. + * * **struct bpf_sock_addr** for **BPF_CGROUP_INET4_CONNECT** + * and **BPF_CGROUP_INET6_CONNECT**. + * + * This helper actually implements a subset of **getsockopt()**. + * It supports the following *level*\ s: + * + * * **IPPROTO_TCP**, which supports *optname* + * **TCP_CONGESTION**. + * * **IPPROTO_IP**, which supports *optname* **IP_TOS**. + * * **IPPROTO_IPV6**, which supports *optname* **IPV6_TCLASS**. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_override_return(struct pt_regs *regs, u64 rc) + * Description + * Used for error injection, this helper uses kprobes to override + * the return value of the probed function, and to set it to *rc*. + * The first argument is the context *regs* on which the kprobe + * works. + * + * This helper works by setting the PC (program counter) + * to an override function which is run in place of the original + * probed function. This means the probed function is not run at + * all. The replacement function just returns with the required + * value. + * + * This helper has security implications, and thus is subject to + * restrictions. It is only available if the kernel was compiled + * with the **CONFIG_BPF_KPROBE_OVERRIDE** configuration + * option, and in this case it only works on functions tagged with + * **ALLOW_ERROR_INJECTION** in the kernel code. + * + * Also, the helper is only available for the architectures having + * the CONFIG_FUNCTION_ERROR_INJECTION option. As of this writing, + * x86 architecture is the only one to support this feature. + * Return + * 0 + * + * long bpf_sock_ops_cb_flags_set(struct bpf_sock_ops *bpf_sock, int argval) + * Description + * Attempt to set the value of the **bpf_sock_ops_cb_flags** field + * for the full TCP socket associated to *bpf_sock_ops* to + * *argval*. + * + * The primary use of this field is to determine if there should + * be calls to eBPF programs of type + * **BPF_PROG_TYPE_SOCK_OPS** at various points in the TCP + * code. A program of the same type can change its value, per + * connection and as necessary, when the connection is + * established. This field is directly accessible for reading, but + * this helper must be used for updates in order to return an + * error if an eBPF program tries to set a callback that is not + * supported in the current kernel. + * + * *argval* is a flag array which can combine these flags: + * + * * **BPF_SOCK_OPS_RTO_CB_FLAG** (retransmission time out) + * * **BPF_SOCK_OPS_RETRANS_CB_FLAG** (retransmission) + * * **BPF_SOCK_OPS_STATE_CB_FLAG** (TCP state change) + * * **BPF_SOCK_OPS_RTT_CB_FLAG** (every RTT) + * + * Therefore, this function can be used to clear a callback flag by + * setting the appropriate bit to zero. e.g. to disable the RTO + * callback: + * + * **bpf_sock_ops_cb_flags_set(bpf_sock,** + * **bpf_sock->bpf_sock_ops_cb_flags & ~BPF_SOCK_OPS_RTO_CB_FLAG)** + * + * Here are some examples of where one could call such eBPF + * program: + * + * * When RTO fires. + * * When a packet is retransmitted. + * * When the connection terminates. + * * When a packet is sent. + * * When a packet is received. + * Return + * Code **-EINVAL** if the socket is not a full TCP socket; + * otherwise, a positive number containing the bits that could not + * be set is returned (which comes down to 0 if all bits were set + * as required). + * + * long bpf_msg_redirect_map(struct sk_msg_buff *msg, struct bpf_map *map, u32 key, u64 flags) + * Description + * This helper is used in programs implementing policies at the + * socket level. If the message *msg* is allowed to pass (i.e. if + * the verdict eBPF program returns **SK_PASS**), redirect it to + * the socket referenced by *map* (of type + * **BPF_MAP_TYPE_SOCKMAP**) at index *key*. Both ingress and + * egress interfaces can be used for redirection. The + * **BPF_F_INGRESS** value in *flags* is used to make the + * distinction (ingress path is selected if the flag is present, + * egress path otherwise). This is the only flag supported for now. + * Return + * **SK_PASS** on success, or **SK_DROP** on error. + * + * long bpf_msg_apply_bytes(struct sk_msg_buff *msg, u32 bytes) + * Description + * For socket policies, apply the verdict of the eBPF program to + * the next *bytes* (number of bytes) of message *msg*. + * + * For example, this helper can be used in the following cases: + * + * * A single **sendmsg**\ () or **sendfile**\ () system call + * contains multiple logical messages that the eBPF program is + * supposed to read and for which it should apply a verdict. + * * An eBPF program only cares to read the first *bytes* of a + * *msg*. If the message has a large payload, then setting up + * and calling the eBPF program repeatedly for all bytes, even + * though the verdict is already known, would create unnecessary + * overhead. + * + * When called from within an eBPF program, the helper sets a + * counter internal to the BPF infrastructure, that is used to + * apply the last verdict to the next *bytes*. If *bytes* is + * smaller than the current data being processed from a + * **sendmsg**\ () or **sendfile**\ () system call, the first + * *bytes* will be sent and the eBPF program will be re-run with + * the pointer for start of data pointing to byte number *bytes* + * **+ 1**. If *bytes* is larger than the current data being + * processed, then the eBPF verdict will be applied to multiple + * **sendmsg**\ () or **sendfile**\ () calls until *bytes* are + * consumed. + * + * Note that if a socket closes with the internal counter holding + * a non-zero value, this is not a problem because data is not + * being buffered for *bytes* and is sent as it is received. + * Return + * 0 + * + * long bpf_msg_cork_bytes(struct sk_msg_buff *msg, u32 bytes) + * Description + * For socket policies, prevent the execution of the verdict eBPF + * program for message *msg* until *bytes* (byte number) have been + * accumulated. + * + * This can be used when one needs a specific number of bytes + * before a verdict can be assigned, even if the data spans + * multiple **sendmsg**\ () or **sendfile**\ () calls. The extreme + * case would be a user calling **sendmsg**\ () repeatedly with + * 1-byte long message segments. Obviously, this is bad for + * performance, but it is still valid. If the eBPF program needs + * *bytes* bytes to validate a header, this helper can be used to + * prevent the eBPF program to be called again until *bytes* have + * been accumulated. + * Return + * 0 + * + * long bpf_msg_pull_data(struct sk_msg_buff *msg, u32 start, u32 end, u64 flags) + * Description + * For socket policies, pull in non-linear data from user space + * for *msg* and set pointers *msg*\ **->data** and *msg*\ + * **->data_end** to *start* and *end* bytes offsets into *msg*, + * respectively. + * + * If a program of type **BPF_PROG_TYPE_SK_MSG** is run on a + * *msg* it can only parse data that the (**data**, **data_end**) + * pointers have already consumed. For **sendmsg**\ () hooks this + * is likely the first scatterlist element. But for calls relying + * on the **sendpage** handler (e.g. **sendfile**\ ()) this will + * be the range (**0**, **0**) because the data is shared with + * user space and by default the objective is to avoid allowing + * user space to modify data while (or after) eBPF verdict is + * being decided. This helper can be used to pull in data and to + * set the start and end pointer to given values. Data will be + * copied if necessary (i.e. if data was not linear and if start + * and end pointers do not point to the same chunk). + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * + * All values for *flags* are reserved for future usage, and must + * be left at zero. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_bind(struct bpf_sock_addr *ctx, struct sockaddr *addr, int addr_len) + * Description + * Bind the socket associated to *ctx* to the address pointed by + * *addr*, of length *addr_len*. This allows for making outgoing + * connection from the desired IP address, which can be useful for + * example when all processes inside a cgroup should use one + * single IP address on a host that has multiple IP configured. + * + * This helper works for IPv4 and IPv6, TCP and UDP sockets. The + * domain (*addr*\ **->sa_family**) must be **AF_INET** (or + * **AF_INET6**). It's advised to pass zero port (**sin_port** + * or **sin6_port**) which triggers IP_BIND_ADDRESS_NO_PORT-like + * behavior and lets the kernel efficiently pick up an unused + * port as long as 4-tuple is unique. Passing non-zero port might + * lead to degraded performance. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_xdp_adjust_tail(struct xdp_buff *xdp_md, int delta) + * Description + * Adjust (move) *xdp_md*\ **->data_end** by *delta* bytes. It is + * possible to both shrink and grow the packet tail. + * Shrink done via *delta* being a negative integer. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_skb_get_xfrm_state(struct sk_buff *skb, u32 index, struct bpf_xfrm_state *xfrm_state, u32 size, u64 flags) + * Description + * Retrieve the XFRM state (IP transform framework, see also + * **ip-xfrm(8)**) at *index* in XFRM "security path" for *skb*. + * + * The retrieved value is stored in the **struct bpf_xfrm_state** + * pointed by *xfrm_state* and of length *size*. + * + * All values for *flags* are reserved for future usage, and must + * be left at zero. + * + * This helper is available only if the kernel was compiled with + * **CONFIG_XFRM** configuration option. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_get_stack(void *ctx, void *buf, u32 size, u64 flags) + * Description + * Return a user or a kernel stack in bpf program provided buffer. + * To achieve this, the helper needs *ctx*, which is a pointer + * to the context on which the tracing program is executed. + * To store the stacktrace, the bpf program provides *buf* with + * a nonnegative *size*. + * + * The last argument, *flags*, holds the number of stack frames to + * skip (from 0 to 255), masked with + * **BPF_F_SKIP_FIELD_MASK**. The next bits can be used to set + * the following flags: + * + * **BPF_F_USER_STACK** + * Collect a user space stack instead of a kernel stack. + * **BPF_F_USER_BUILD_ID** + * Collect buildid+offset instead of ips for user stack, + * only valid if **BPF_F_USER_STACK** is also specified. + * + * **bpf_get_stack**\ () can collect up to + * **PERF_MAX_STACK_DEPTH** both kernel and user frames, subject + * to sufficient large buffer size. Note that + * this limit can be controlled with the **sysctl** program, and + * that it should be manually increased in order to profile long + * user stacks (such as stacks for Java programs). To do so, use: + * + * :: + * + * # sysctl kernel.perf_event_max_stack= + * Return + * A non-negative value equal to or less than *size* on success, + * or a negative error in case of failure. + * + * long bpf_skb_load_bytes_relative(const void *skb, u32 offset, void *to, u32 len, u32 start_header) + * Description + * This helper is similar to **bpf_skb_load_bytes**\ () in that + * it provides an easy way to load *len* bytes from *offset* + * from the packet associated to *skb*, into the buffer pointed + * by *to*. The difference to **bpf_skb_load_bytes**\ () is that + * a fifth argument *start_header* exists in order to select a + * base offset to start from. *start_header* can be one of: + * + * **BPF_HDR_START_MAC** + * Base offset to load data from is *skb*'s mac header. + * **BPF_HDR_START_NET** + * Base offset to load data from is *skb*'s network header. + * + * In general, "direct packet access" is the preferred method to + * access packet data, however, this helper is in particular useful + * in socket filters where *skb*\ **->data** does not always point + * to the start of the mac header and where "direct packet access" + * is not available. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_fib_lookup(void *ctx, struct bpf_fib_lookup *params, int plen, u32 flags) + * Description + * Do FIB lookup in kernel tables using parameters in *params*. + * If lookup is successful and result shows packet is to be + * forwarded, the neighbor tables are searched for the nexthop. + * If successful (ie., FIB lookup shows forwarding and nexthop + * is resolved), the nexthop address is returned in ipv4_dst + * or ipv6_dst based on family, smac is set to mac address of + * egress device, dmac is set to nexthop mac address, rt_metric + * is set to metric from route (IPv4/IPv6 only), and ifindex + * is set to the device index of the nexthop from the FIB lookup. + * + * *plen* argument is the size of the passed in struct. + * *flags* argument can be a combination of one or more of the + * following values: + * + * **BPF_FIB_LOOKUP_DIRECT** + * Do a direct table lookup vs full lookup using FIB + * rules. + * **BPF_FIB_LOOKUP_OUTPUT** + * Perform lookup from an egress perspective (default is + * ingress). + * + * *ctx* is either **struct xdp_md** for XDP programs or + * **struct sk_buff** tc cls_act programs. + * Return + * * < 0 if any input argument is invalid + * * 0 on success (packet is forwarded, nexthop neighbor exists) + * * > 0 one of **BPF_FIB_LKUP_RET_** codes explaining why the + * packet is not forwarded or needs assist from full stack + * + * long bpf_sock_hash_update(struct bpf_sock_ops *skops, struct bpf_map *map, void *key, u64 flags) + * Description + * Add an entry to, or update a sockhash *map* referencing sockets. + * The *skops* is used as a new value for the entry associated to + * *key*. *flags* is one of: + * + * **BPF_NOEXIST** + * The entry for *key* must not exist in the map. + * **BPF_EXIST** + * The entry for *key* must already exist in the map. + * **BPF_ANY** + * No condition on the existence of the entry for *key*. + * + * If the *map* has eBPF programs (parser and verdict), those will + * be inherited by the socket being added. If the socket is + * already attached to eBPF programs, this results in an error. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_msg_redirect_hash(struct sk_msg_buff *msg, struct bpf_map *map, void *key, u64 flags) + * Description + * This helper is used in programs implementing policies at the + * socket level. If the message *msg* is allowed to pass (i.e. if + * the verdict eBPF program returns **SK_PASS**), redirect it to + * the socket referenced by *map* (of type + * **BPF_MAP_TYPE_SOCKHASH**) using hash *key*. Both ingress and + * egress interfaces can be used for redirection. The + * **BPF_F_INGRESS** value in *flags* is used to make the + * distinction (ingress path is selected if the flag is present, + * egress path otherwise). This is the only flag supported for now. + * Return + * **SK_PASS** on success, or **SK_DROP** on error. + * + * long bpf_sk_redirect_hash(struct sk_buff *skb, struct bpf_map *map, void *key, u64 flags) + * Description + * This helper is used in programs implementing policies at the + * skb socket level. If the sk_buff *skb* is allowed to pass (i.e. + * if the verdict eBPF program returns **SK_PASS**), redirect it + * to the socket referenced by *map* (of type + * **BPF_MAP_TYPE_SOCKHASH**) using hash *key*. Both ingress and + * egress interfaces can be used for redirection. The + * **BPF_F_INGRESS** value in *flags* is used to make the + * distinction (ingress path is selected if the flag is present, + * egress otherwise). This is the only flag supported for now. + * Return + * **SK_PASS** on success, or **SK_DROP** on error. + * + * long bpf_lwt_push_encap(struct sk_buff *skb, u32 type, void *hdr, u32 len) + * Description + * Encapsulate the packet associated to *skb* within a Layer 3 + * protocol header. This header is provided in the buffer at + * address *hdr*, with *len* its size in bytes. *type* indicates + * the protocol of the header and can be one of: + * + * **BPF_LWT_ENCAP_SEG6** + * IPv6 encapsulation with Segment Routing Header + * (**struct ipv6_sr_hdr**). *hdr* only contains the SRH, + * the IPv6 header is computed by the kernel. + * **BPF_LWT_ENCAP_SEG6_INLINE** + * Only works if *skb* contains an IPv6 packet. Insert a + * Segment Routing Header (**struct ipv6_sr_hdr**) inside + * the IPv6 header. + * **BPF_LWT_ENCAP_IP** + * IP encapsulation (GRE/GUE/IPIP/etc). The outer header + * must be IPv4 or IPv6, followed by zero or more + * additional headers, up to **LWT_BPF_MAX_HEADROOM** + * total bytes in all prepended headers. Please note that + * if **skb_is_gso**\ (*skb*) is true, no more than two + * headers can be prepended, and the inner header, if + * present, should be either GRE or UDP/GUE. + * + * **BPF_LWT_ENCAP_SEG6**\ \* types can be called by BPF programs + * of type **BPF_PROG_TYPE_LWT_IN**; **BPF_LWT_ENCAP_IP** type can + * be called by bpf programs of types **BPF_PROG_TYPE_LWT_IN** and + * **BPF_PROG_TYPE_LWT_XMIT**. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_lwt_seg6_store_bytes(struct sk_buff *skb, u32 offset, const void *from, u32 len) + * Description + * Store *len* bytes from address *from* into the packet + * associated to *skb*, at *offset*. Only the flags, tag and TLVs + * inside the outermost IPv6 Segment Routing Header can be + * modified through this helper. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_lwt_seg6_adjust_srh(struct sk_buff *skb, u32 offset, s32 delta) + * Description + * Adjust the size allocated to TLVs in the outermost IPv6 + * Segment Routing Header contained in the packet associated to + * *skb*, at position *offset* by *delta* bytes. Only offsets + * after the segments are accepted. *delta* can be as well + * positive (growing) as negative (shrinking). + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_lwt_seg6_action(struct sk_buff *skb, u32 action, void *param, u32 param_len) + * Description + * Apply an IPv6 Segment Routing action of type *action* to the + * packet associated to *skb*. Each action takes a parameter + * contained at address *param*, and of length *param_len* bytes. + * *action* can be one of: + * + * **SEG6_LOCAL_ACTION_END_X** + * End.X action: Endpoint with Layer-3 cross-connect. + * Type of *param*: **struct in6_addr**. + * **SEG6_LOCAL_ACTION_END_T** + * End.T action: Endpoint with specific IPv6 table lookup. + * Type of *param*: **int**. + * **SEG6_LOCAL_ACTION_END_B6** + * End.B6 action: Endpoint bound to an SRv6 policy. + * Type of *param*: **struct ipv6_sr_hdr**. + * **SEG6_LOCAL_ACTION_END_B6_ENCAP** + * End.B6.Encap action: Endpoint bound to an SRv6 + * encapsulation policy. + * Type of *param*: **struct ipv6_sr_hdr**. + * + * A call to this helper is susceptible to change the underlying + * packet buffer. Therefore, at load time, all checks on pointers + * previously done by the verifier are invalidated and must be + * performed again, if the helper is used in combination with + * direct packet access. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_rc_repeat(void *ctx) + * Description + * This helper is used in programs implementing IR decoding, to + * report a successfully decoded repeat key message. This delays + * the generation of a key up event for previously generated + * key down event. + * + * Some IR protocols like NEC have a special IR message for + * repeating last button, for when a button is held down. + * + * The *ctx* should point to the lirc sample as passed into + * the program. + * + * This helper is only available is the kernel was compiled with + * the **CONFIG_BPF_LIRC_MODE2** configuration option set to + * "**y**". + * Return + * 0 + * + * long bpf_rc_keydown(void *ctx, u32 protocol, u64 scancode, u32 toggle) + * Description + * This helper is used in programs implementing IR decoding, to + * report a successfully decoded key press with *scancode*, + * *toggle* value in the given *protocol*. The scancode will be + * translated to a keycode using the rc keymap, and reported as + * an input key down event. After a period a key up event is + * generated. This period can be extended by calling either + * **bpf_rc_keydown**\ () again with the same values, or calling + * **bpf_rc_repeat**\ (). + * + * Some protocols include a toggle bit, in case the button was + * released and pressed again between consecutive scancodes. + * + * The *ctx* should point to the lirc sample as passed into + * the program. + * + * The *protocol* is the decoded protocol number (see + * **enum rc_proto** for some predefined values). + * + * This helper is only available is the kernel was compiled with + * the **CONFIG_BPF_LIRC_MODE2** configuration option set to + * "**y**". + * Return + * 0 + * + * u64 bpf_skb_cgroup_id(struct sk_buff *skb) + * Description + * Return the cgroup v2 id of the socket associated with the *skb*. + * This is roughly similar to the **bpf_get_cgroup_classid**\ () + * helper for cgroup v1 by providing a tag resp. identifier that + * can be matched on or used for map lookups e.g. to implement + * policy. The cgroup v2 id of a given path in the hierarchy is + * exposed in user space through the f_handle API in order to get + * to the same 64-bit id. + * + * This helper can be used on TC egress path, but not on ingress, + * and is available only if the kernel was compiled with the + * **CONFIG_SOCK_CGROUP_DATA** configuration option. + * Return + * The id is returned or 0 in case the id could not be retrieved. + * + * u64 bpf_get_current_cgroup_id(void) + * Return + * A 64-bit integer containing the current cgroup id based + * on the cgroup within which the current task is running. + * + * void *bpf_get_local_storage(void *map, u64 flags) + * Description + * Get the pointer to the local storage area. + * The type and the size of the local storage is defined + * by the *map* argument. + * The *flags* meaning is specific for each map type, + * and has to be 0 for cgroup local storage. + * + * Depending on the BPF program type, a local storage area + * can be shared between multiple instances of the BPF program, + * running simultaneously. + * + * A user should care about the synchronization by himself. + * For example, by using the **BPF_STX_XADD** instruction to alter + * the shared data. + * Return + * A pointer to the local storage area. + * + * long bpf_sk_select_reuseport(struct sk_reuseport_md *reuse, struct bpf_map *map, void *key, u64 flags) + * Description + * Select a **SO_REUSEPORT** socket from a + * **BPF_MAP_TYPE_REUSEPORT_ARRAY** *map*. + * It checks the selected socket is matching the incoming + * request in the socket buffer. + * Return + * 0 on success, or a negative error in case of failure. + * + * u64 bpf_skb_ancestor_cgroup_id(struct sk_buff *skb, int ancestor_level) + * Description + * Return id of cgroup v2 that is ancestor of cgroup associated + * with the *skb* at the *ancestor_level*. The root cgroup is at + * *ancestor_level* zero and each step down the hierarchy + * increments the level. If *ancestor_level* == level of cgroup + * associated with *skb*, then return value will be same as that + * of **bpf_skb_cgroup_id**\ (). + * + * The helper is useful to implement policies based on cgroups + * that are upper in hierarchy than immediate cgroup associated + * with *skb*. + * + * The format of returned id and helper limitations are same as in + * **bpf_skb_cgroup_id**\ (). + * Return + * The id is returned or 0 in case the id could not be retrieved. + * + * struct bpf_sock *bpf_sk_lookup_tcp(void *ctx, struct bpf_sock_tuple *tuple, u32 tuple_size, u64 netns, u64 flags) + * Description + * Look for TCP socket matching *tuple*, optionally in a child + * network namespace *netns*. The return value must be checked, + * and if non-**NULL**, released via **bpf_sk_release**\ (). + * + * The *ctx* should point to the context of the program, such as + * the skb or socket (depending on the hook in use). This is used + * to determine the base network namespace for the lookup. + * + * *tuple_size* must be one of: + * + * **sizeof**\ (*tuple*\ **->ipv4**) + * Look for an IPv4 socket. + * **sizeof**\ (*tuple*\ **->ipv6**) + * Look for an IPv6 socket. + * + * If the *netns* is a negative signed 32-bit integer, then the + * socket lookup table in the netns associated with the *ctx* + * will be used. For the TC hooks, this is the netns of the device + * in the skb. For socket hooks, this is the netns of the socket. + * If *netns* is any other signed 32-bit value greater than or + * equal to zero then it specifies the ID of the netns relative to + * the netns associated with the *ctx*. *netns* values beyond the + * range of 32-bit integers are reserved for future use. + * + * All values for *flags* are reserved for future usage, and must + * be left at zero. + * + * This helper is available only if the kernel was compiled with + * **CONFIG_NET** configuration option. + * Return + * Pointer to **struct bpf_sock**, or **NULL** in case of failure. + * For sockets with reuseport option, the **struct bpf_sock** + * result is from *reuse*\ **->socks**\ [] using the hash of the + * tuple. + * + * struct bpf_sock *bpf_sk_lookup_udp(void *ctx, struct bpf_sock_tuple *tuple, u32 tuple_size, u64 netns, u64 flags) + * Description + * Look for UDP socket matching *tuple*, optionally in a child + * network namespace *netns*. The return value must be checked, + * and if non-**NULL**, released via **bpf_sk_release**\ (). + * + * The *ctx* should point to the context of the program, such as + * the skb or socket (depending on the hook in use). This is used + * to determine the base network namespace for the lookup. + * + * *tuple_size* must be one of: + * + * **sizeof**\ (*tuple*\ **->ipv4**) + * Look for an IPv4 socket. + * **sizeof**\ (*tuple*\ **->ipv6**) + * Look for an IPv6 socket. + * + * If the *netns* is a negative signed 32-bit integer, then the + * socket lookup table in the netns associated with the *ctx* + * will be used. For the TC hooks, this is the netns of the device + * in the skb. For socket hooks, this is the netns of the socket. + * If *netns* is any other signed 32-bit value greater than or + * equal to zero then it specifies the ID of the netns relative to + * the netns associated with the *ctx*. *netns* values beyond the + * range of 32-bit integers are reserved for future use. + * + * All values for *flags* are reserved for future usage, and must + * be left at zero. + * + * This helper is available only if the kernel was compiled with + * **CONFIG_NET** configuration option. + * Return + * Pointer to **struct bpf_sock**, or **NULL** in case of failure. + * For sockets with reuseport option, the **struct bpf_sock** + * result is from *reuse*\ **->socks**\ [] using the hash of the + * tuple. + * + * long bpf_sk_release(void *sock) + * Description + * Release the reference held by *sock*. *sock* must be a + * non-**NULL** pointer that was returned from + * **bpf_sk_lookup_xxx**\ (). + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_map_push_elem(struct bpf_map *map, const void *value, u64 flags) + * Description + * Push an element *value* in *map*. *flags* is one of: + * + * **BPF_EXIST** + * If the queue/stack is full, the oldest element is + * removed to make room for this. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_map_pop_elem(struct bpf_map *map, void *value) + * Description + * Pop an element from *map*. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_map_peek_elem(struct bpf_map *map, void *value) + * Description + * Get an element from *map* without removing it. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_msg_push_data(struct sk_msg_buff *msg, u32 start, u32 len, u64 flags) + * Description + * For socket policies, insert *len* bytes into *msg* at offset + * *start*. + * + * If a program of type **BPF_PROG_TYPE_SK_MSG** is run on a + * *msg* it may want to insert metadata or options into the *msg*. + * This can later be read and used by any of the lower layer BPF + * hooks. + * + * This helper may fail if under memory pressure (a malloc + * fails) in these cases BPF programs will get an appropriate + * error and BPF programs will need to handle them. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_msg_pop_data(struct sk_msg_buff *msg, u32 start, u32 len, u64 flags) + * Description + * Will remove *len* bytes from a *msg* starting at byte *start*. + * This may result in **ENOMEM** errors under certain situations if + * an allocation and copy are required due to a full ring buffer. + * However, the helper will try to avoid doing the allocation + * if possible. Other errors can occur if input parameters are + * invalid either due to *start* byte not being valid part of *msg* + * payload and/or *pop* value being to large. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_rc_pointer_rel(void *ctx, s32 rel_x, s32 rel_y) + * Description + * This helper is used in programs implementing IR decoding, to + * report a successfully decoded pointer movement. + * + * The *ctx* should point to the lirc sample as passed into + * the program. + * + * This helper is only available is the kernel was compiled with + * the **CONFIG_BPF_LIRC_MODE2** configuration option set to + * "**y**". + * Return + * 0 + * + * long bpf_spin_lock(struct bpf_spin_lock *lock) + * Description + * Acquire a spinlock represented by the pointer *lock*, which is + * stored as part of a value of a map. Taking the lock allows to + * safely update the rest of the fields in that value. The + * spinlock can (and must) later be released with a call to + * **bpf_spin_unlock**\ (\ *lock*\ ). + * + * Spinlocks in BPF programs come with a number of restrictions + * and constraints: + * + * * **bpf_spin_lock** objects are only allowed inside maps of + * types **BPF_MAP_TYPE_HASH** and **BPF_MAP_TYPE_ARRAY** (this + * list could be extended in the future). + * * BTF description of the map is mandatory. + * * The BPF program can take ONE lock at a time, since taking two + * or more could cause dead locks. + * * Only one **struct bpf_spin_lock** is allowed per map element. + * * When the lock is taken, calls (either BPF to BPF or helpers) + * are not allowed. + * * The **BPF_LD_ABS** and **BPF_LD_IND** instructions are not + * allowed inside a spinlock-ed region. + * * The BPF program MUST call **bpf_spin_unlock**\ () to release + * the lock, on all execution paths, before it returns. + * * The BPF program can access **struct bpf_spin_lock** only via + * the **bpf_spin_lock**\ () and **bpf_spin_unlock**\ () + * helpers. Loading or storing data into the **struct + * bpf_spin_lock** *lock*\ **;** field of a map is not allowed. + * * To use the **bpf_spin_lock**\ () helper, the BTF description + * of the map value must be a struct and have **struct + * bpf_spin_lock** *anyname*\ **;** field at the top level. + * Nested lock inside another struct is not allowed. + * * The **struct bpf_spin_lock** *lock* field in a map value must + * be aligned on a multiple of 4 bytes in that value. + * * Syscall with command **BPF_MAP_LOOKUP_ELEM** does not copy + * the **bpf_spin_lock** field to user space. + * * Syscall with command **BPF_MAP_UPDATE_ELEM**, or update from + * a BPF program, do not update the **bpf_spin_lock** field. + * * **bpf_spin_lock** cannot be on the stack or inside a + * networking packet (it can only be inside of a map values). + * * **bpf_spin_lock** is available to root only. + * * Tracing programs and socket filter programs cannot use + * **bpf_spin_lock**\ () due to insufficient preemption checks + * (but this may change in the future). + * * **bpf_spin_lock** is not allowed in inner maps of map-in-map. + * Return + * 0 + * + * long bpf_spin_unlock(struct bpf_spin_lock *lock) + * Description + * Release the *lock* previously locked by a call to + * **bpf_spin_lock**\ (\ *lock*\ ). + * Return + * 0 + * + * struct bpf_sock *bpf_sk_fullsock(struct bpf_sock *sk) + * Description + * This helper gets a **struct bpf_sock** pointer such + * that all the fields in this **bpf_sock** can be accessed. + * Return + * A **struct bpf_sock** pointer on success, or **NULL** in + * case of failure. + * + * struct bpf_tcp_sock *bpf_tcp_sock(struct bpf_sock *sk) + * Description + * This helper gets a **struct bpf_tcp_sock** pointer from a + * **struct bpf_sock** pointer. + * Return + * A **struct bpf_tcp_sock** pointer on success, or **NULL** in + * case of failure. + * + * long bpf_skb_ecn_set_ce(struct sk_buff *skb) + * Description + * Set ECN (Explicit Congestion Notification) field of IP header + * to **CE** (Congestion Encountered) if current value is **ECT** + * (ECN Capable Transport). Otherwise, do nothing. Works with IPv6 + * and IPv4. + * Return + * 1 if the **CE** flag is set (either by the current helper call + * or because it was already present), 0 if it is not set. + * + * struct bpf_sock *bpf_get_listener_sock(struct bpf_sock *sk) + * Description + * Return a **struct bpf_sock** pointer in **TCP_LISTEN** state. + * **bpf_sk_release**\ () is unnecessary and not allowed. + * Return + * A **struct bpf_sock** pointer on success, or **NULL** in + * case of failure. + * + * struct bpf_sock *bpf_skc_lookup_tcp(void *ctx, struct bpf_sock_tuple *tuple, u32 tuple_size, u64 netns, u64 flags) + * Description + * Look for TCP socket matching *tuple*, optionally in a child + * network namespace *netns*. The return value must be checked, + * and if non-**NULL**, released via **bpf_sk_release**\ (). + * + * This function is identical to **bpf_sk_lookup_tcp**\ (), except + * that it also returns timewait or request sockets. Use + * **bpf_sk_fullsock**\ () or **bpf_tcp_sock**\ () to access the + * full structure. + * + * This helper is available only if the kernel was compiled with + * **CONFIG_NET** configuration option. + * Return + * Pointer to **struct bpf_sock**, or **NULL** in case of failure. + * For sockets with reuseport option, the **struct bpf_sock** + * result is from *reuse*\ **->socks**\ [] using the hash of the + * tuple. + * + * long bpf_tcp_check_syncookie(void *sk, void *iph, u32 iph_len, struct tcphdr *th, u32 th_len) + * Description + * Check whether *iph* and *th* contain a valid SYN cookie ACK for + * the listening socket in *sk*. + * + * *iph* points to the start of the IPv4 or IPv6 header, while + * *iph_len* contains **sizeof**\ (**struct iphdr**) or + * **sizeof**\ (**struct ip6hdr**). + * + * *th* points to the start of the TCP header, while *th_len* + * contains **sizeof**\ (**struct tcphdr**). + * Return + * 0 if *iph* and *th* are a valid SYN cookie ACK, or a negative + * error otherwise. + * + * long bpf_sysctl_get_name(struct bpf_sysctl *ctx, char *buf, size_t buf_len, u64 flags) + * Description + * Get name of sysctl in /proc/sys/ and copy it into provided by + * program buffer *buf* of size *buf_len*. + * + * The buffer is always NUL terminated, unless it's zero-sized. + * + * If *flags* is zero, full name (e.g. "net/ipv4/tcp_mem") is + * copied. Use **BPF_F_SYSCTL_BASE_NAME** flag to copy base name + * only (e.g. "tcp_mem"). + * Return + * Number of character copied (not including the trailing NUL). + * + * **-E2BIG** if the buffer wasn't big enough (*buf* will contain + * truncated name in this case). + * + * long bpf_sysctl_get_current_value(struct bpf_sysctl *ctx, char *buf, size_t buf_len) + * Description + * Get current value of sysctl as it is presented in /proc/sys + * (incl. newline, etc), and copy it as a string into provided + * by program buffer *buf* of size *buf_len*. + * + * The whole value is copied, no matter what file position user + * space issued e.g. sys_read at. + * + * The buffer is always NUL terminated, unless it's zero-sized. + * Return + * Number of character copied (not including the trailing NUL). + * + * **-E2BIG** if the buffer wasn't big enough (*buf* will contain + * truncated name in this case). + * + * **-EINVAL** if current value was unavailable, e.g. because + * sysctl is uninitialized and read returns -EIO for it. + * + * long bpf_sysctl_get_new_value(struct bpf_sysctl *ctx, char *buf, size_t buf_len) + * Description + * Get new value being written by user space to sysctl (before + * the actual write happens) and copy it as a string into + * provided by program buffer *buf* of size *buf_len*. + * + * User space may write new value at file position > 0. + * + * The buffer is always NUL terminated, unless it's zero-sized. + * Return + * Number of character copied (not including the trailing NUL). + * + * **-E2BIG** if the buffer wasn't big enough (*buf* will contain + * truncated name in this case). + * + * **-EINVAL** if sysctl is being read. + * + * long bpf_sysctl_set_new_value(struct bpf_sysctl *ctx, const char *buf, size_t buf_len) + * Description + * Override new value being written by user space to sysctl with + * value provided by program in buffer *buf* of size *buf_len*. + * + * *buf* should contain a string in same form as provided by user + * space on sysctl write. + * + * User space may write new value at file position > 0. To override + * the whole sysctl value file position should be set to zero. + * Return + * 0 on success. + * + * **-E2BIG** if the *buf_len* is too big. + * + * **-EINVAL** if sysctl is being read. + * + * long bpf_strtol(const char *buf, size_t buf_len, u64 flags, long *res) + * Description + * Convert the initial part of the string from buffer *buf* of + * size *buf_len* to a long integer according to the given base + * and save the result in *res*. + * + * The string may begin with an arbitrary amount of white space + * (as determined by **isspace**\ (3)) followed by a single + * optional '**-**' sign. + * + * Five least significant bits of *flags* encode base, other bits + * are currently unused. + * + * Base must be either 8, 10, 16 or 0 to detect it automatically + * similar to user space **strtol**\ (3). + * Return + * Number of characters consumed on success. Must be positive but + * no more than *buf_len*. + * + * **-EINVAL** if no valid digits were found or unsupported base + * was provided. + * + * **-ERANGE** if resulting value was out of range. + * + * long bpf_strtoul(const char *buf, size_t buf_len, u64 flags, unsigned long *res) + * Description + * Convert the initial part of the string from buffer *buf* of + * size *buf_len* to an unsigned long integer according to the + * given base and save the result in *res*. + * + * The string may begin with an arbitrary amount of white space + * (as determined by **isspace**\ (3)). + * + * Five least significant bits of *flags* encode base, other bits + * are currently unused. + * + * Base must be either 8, 10, 16 or 0 to detect it automatically + * similar to user space **strtoul**\ (3). + * Return + * Number of characters consumed on success. Must be positive but + * no more than *buf_len*. + * + * **-EINVAL** if no valid digits were found or unsupported base + * was provided. + * + * **-ERANGE** if resulting value was out of range. + * + * void *bpf_sk_storage_get(struct bpf_map *map, void *sk, void *value, u64 flags) + * Description + * Get a bpf-local-storage from a *sk*. + * + * Logically, it could be thought of getting the value from + * a *map* with *sk* as the **key**. From this + * perspective, the usage is not much different from + * **bpf_map_lookup_elem**\ (*map*, **&**\ *sk*) except this + * helper enforces the key must be a full socket and the map must + * be a **BPF_MAP_TYPE_SK_STORAGE** also. + * + * Underneath, the value is stored locally at *sk* instead of + * the *map*. The *map* is used as the bpf-local-storage + * "type". The bpf-local-storage "type" (i.e. the *map*) is + * searched against all bpf-local-storages residing at *sk*. + * + * *sk* is a kernel **struct sock** pointer for LSM program. + * *sk* is a **struct bpf_sock** pointer for other program types. + * + * An optional *flags* (**BPF_SK_STORAGE_GET_F_CREATE**) can be + * used such that a new bpf-local-storage will be + * created if one does not exist. *value* can be used + * together with **BPF_SK_STORAGE_GET_F_CREATE** to specify + * the initial value of a bpf-local-storage. If *value* is + * **NULL**, the new bpf-local-storage will be zero initialized. + * Return + * A bpf-local-storage pointer is returned on success. + * + * **NULL** if not found or there was an error in adding + * a new bpf-local-storage. + * + * long bpf_sk_storage_delete(struct bpf_map *map, void *sk) + * Description + * Delete a bpf-local-storage from a *sk*. + * Return + * 0 on success. + * + * **-ENOENT** if the bpf-local-storage cannot be found. + * **-EINVAL** if sk is not a fullsock (e.g. a request_sock). + * + * long bpf_send_signal(u32 sig) + * Description + * Send signal *sig* to the process of the current task. + * The signal may be delivered to any of this process's threads. + * Return + * 0 on success or successfully queued. + * + * **-EBUSY** if work queue under nmi is full. + * + * **-EINVAL** if *sig* is invalid. + * + * **-EPERM** if no permission to send the *sig*. + * + * **-EAGAIN** if bpf program can try again. + * + * s64 bpf_tcp_gen_syncookie(void *sk, void *iph, u32 iph_len, struct tcphdr *th, u32 th_len) + * Description + * Try to issue a SYN cookie for the packet with corresponding + * IP/TCP headers, *iph* and *th*, on the listening socket in *sk*. + * + * *iph* points to the start of the IPv4 or IPv6 header, while + * *iph_len* contains **sizeof**\ (**struct iphdr**) or + * **sizeof**\ (**struct ip6hdr**). + * + * *th* points to the start of the TCP header, while *th_len* + * contains the length of the TCP header. + * Return + * On success, lower 32 bits hold the generated SYN cookie in + * followed by 16 bits which hold the MSS value for that cookie, + * and the top 16 bits are unused. + * + * On failure, the returned value is one of the following: + * + * **-EINVAL** SYN cookie cannot be issued due to error + * + * **-ENOENT** SYN cookie should not be issued (no SYN flood) + * + * **-EOPNOTSUPP** kernel configuration does not enable SYN cookies + * + * **-EPROTONOSUPPORT** IP packet version is not 4 or 6 + * + * long bpf_skb_output(void *ctx, struct bpf_map *map, u64 flags, void *data, u64 size) + * Description + * Write raw *data* blob into a special BPF perf event held by + * *map* of type **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. This perf + * event must have the following attributes: **PERF_SAMPLE_RAW** + * as **sample_type**, **PERF_TYPE_SOFTWARE** as **type**, and + * **PERF_COUNT_SW_BPF_OUTPUT** as **config**. + * + * The *flags* are used to indicate the index in *map* for which + * the value must be put, masked with **BPF_F_INDEX_MASK**. + * Alternatively, *flags* can be set to **BPF_F_CURRENT_CPU** + * to indicate that the index of the current CPU core should be + * used. + * + * The value to write, of *size*, is passed through eBPF stack and + * pointed by *data*. + * + * *ctx* is a pointer to in-kernel struct sk_buff. + * + * This helper is similar to **bpf_perf_event_output**\ () but + * restricted to raw_tracepoint bpf programs. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_probe_read_user(void *dst, u32 size, const void *unsafe_ptr) + * Description + * Safely attempt to read *size* bytes from user space address + * *unsafe_ptr* and store the data in *dst*. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_probe_read_kernel(void *dst, u32 size, const void *unsafe_ptr) + * Description + * Safely attempt to read *size* bytes from kernel space address + * *unsafe_ptr* and store the data in *dst*. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_probe_read_user_str(void *dst, u32 size, const void *unsafe_ptr) + * Description + * Copy a NUL terminated string from an unsafe user address + * *unsafe_ptr* to *dst*. The *size* should include the + * terminating NUL byte. In case the string length is smaller than + * *size*, the target is not padded with further NUL bytes. If the + * string length is larger than *size*, just *size*-1 bytes are + * copied and the last byte is set to NUL. + * + * On success, the length of the copied string is returned. This + * makes this helper useful in tracing programs for reading + * strings, and more importantly to get its length at runtime. See + * the following snippet: + * + * :: + * + * SEC("kprobe/sys_open") + * void bpf_sys_open(struct pt_regs *ctx) + * { + * char buf[PATHLEN]; // PATHLEN is defined to 256 + * int res = bpf_probe_read_user_str(buf, sizeof(buf), + * ctx->di); + * + * // Consume buf, for example push it to + * // userspace via bpf_perf_event_output(); we + * // can use res (the string length) as event + * // size, after checking its boundaries. + * } + * + * In comparison, using **bpf_probe_read_user**\ () helper here + * instead to read the string would require to estimate the length + * at compile time, and would often result in copying more memory + * than necessary. + * + * Another useful use case is when parsing individual process + * arguments or individual environment variables navigating + * *current*\ **->mm->arg_start** and *current*\ + * **->mm->env_start**: using this helper and the return value, + * one can quickly iterate at the right offset of the memory area. + * Return + * On success, the strictly positive length of the string, + * including the trailing NUL character. On error, a negative + * value. + * + * long bpf_probe_read_kernel_str(void *dst, u32 size, const void *unsafe_ptr) + * Description + * Copy a NUL terminated string from an unsafe kernel address *unsafe_ptr* + * to *dst*. Same semantics as with **bpf_probe_read_user_str**\ () apply. + * Return + * On success, the strictly positive length of the string, including + * the trailing NUL character. On error, a negative value. + * + * long bpf_tcp_send_ack(void *tp, u32 rcv_nxt) + * Description + * Send out a tcp-ack. *tp* is the in-kernel struct **tcp_sock**. + * *rcv_nxt* is the ack_seq to be sent out. + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_send_signal_thread(u32 sig) + * Description + * Send signal *sig* to the thread corresponding to the current task. + * Return + * 0 on success or successfully queued. + * + * **-EBUSY** if work queue under nmi is full. + * + * **-EINVAL** if *sig* is invalid. + * + * **-EPERM** if no permission to send the *sig*. + * + * **-EAGAIN** if bpf program can try again. + * + * u64 bpf_jiffies64(void) + * Description + * Obtain the 64bit jiffies + * Return + * The 64 bit jiffies + * + * long bpf_read_branch_records(struct bpf_perf_event_data *ctx, void *buf, u32 size, u64 flags) + * Description + * For an eBPF program attached to a perf event, retrieve the + * branch records (**struct perf_branch_entry**) associated to *ctx* + * and store it in the buffer pointed by *buf* up to size + * *size* bytes. + * Return + * On success, number of bytes written to *buf*. On error, a + * negative value. + * + * The *flags* can be set to **BPF_F_GET_BRANCH_RECORDS_SIZE** to + * instead return the number of bytes required to store all the + * branch entries. If this flag is set, *buf* may be NULL. + * + * **-EINVAL** if arguments invalid or **size** not a multiple + * of **sizeof**\ (**struct perf_branch_entry**\ ). + * + * **-ENOENT** if architecture does not support branch records. + * + * long bpf_get_ns_current_pid_tgid(u64 dev, u64 ino, struct bpf_pidns_info *nsdata, u32 size) + * Description + * Returns 0 on success, values for *pid* and *tgid* as seen from the current + * *namespace* will be returned in *nsdata*. + * Return + * 0 on success, or one of the following in case of failure: + * + * **-EINVAL** if dev and inum supplied don't match dev_t and inode number + * with nsfs of current task, or if dev conversion to dev_t lost high bits. + * + * **-ENOENT** if pidns does not exists for the current task. + * + * long bpf_xdp_output(void *ctx, struct bpf_map *map, u64 flags, void *data, u64 size) + * Description + * Write raw *data* blob into a special BPF perf event held by + * *map* of type **BPF_MAP_TYPE_PERF_EVENT_ARRAY**. This perf + * event must have the following attributes: **PERF_SAMPLE_RAW** + * as **sample_type**, **PERF_TYPE_SOFTWARE** as **type**, and + * **PERF_COUNT_SW_BPF_OUTPUT** as **config**. + * + * The *flags* are used to indicate the index in *map* for which + * the value must be put, masked with **BPF_F_INDEX_MASK**. + * Alternatively, *flags* can be set to **BPF_F_CURRENT_CPU** + * to indicate that the index of the current CPU core should be + * used. + * + * The value to write, of *size*, is passed through eBPF stack and + * pointed by *data*. + * + * *ctx* is a pointer to in-kernel struct xdp_buff. + * + * This helper is similar to **bpf_perf_eventoutput**\ () but + * restricted to raw_tracepoint bpf programs. + * Return + * 0 on success, or a negative error in case of failure. + * + * u64 bpf_get_netns_cookie(void *ctx) + * Description + * Retrieve the cookie (generated by the kernel) of the network + * namespace the input *ctx* is associated with. The network + * namespace cookie remains stable for its lifetime and provides + * a global identifier that can be assumed unique. If *ctx* is + * NULL, then the helper returns the cookie for the initial + * network namespace. The cookie itself is very similar to that + * of **bpf_get_socket_cookie**\ () helper, but for network + * namespaces instead of sockets. + * Return + * A 8-byte long opaque number. + * + * u64 bpf_get_current_ancestor_cgroup_id(int ancestor_level) + * Description + * Return id of cgroup v2 that is ancestor of the cgroup associated + * with the current task at the *ancestor_level*. The root cgroup + * is at *ancestor_level* zero and each step down the hierarchy + * increments the level. If *ancestor_level* == level of cgroup + * associated with the current task, then return value will be the + * same as that of **bpf_get_current_cgroup_id**\ (). + * + * The helper is useful to implement policies based on cgroups + * that are upper in hierarchy than immediate cgroup associated + * with the current task. + * + * The format of returned id and helper limitations are same as in + * **bpf_get_current_cgroup_id**\ (). + * Return + * The id is returned or 0 in case the id could not be retrieved. + * + * long bpf_sk_assign(struct sk_buff *skb, void *sk, u64 flags) + * Description + * Helper is overloaded depending on BPF program type. This + * description applies to **BPF_PROG_TYPE_SCHED_CLS** and + * **BPF_PROG_TYPE_SCHED_ACT** programs. + * + * Assign the *sk* to the *skb*. When combined with appropriate + * routing configuration to receive the packet towards the socket, + * will cause *skb* to be delivered to the specified socket. + * Subsequent redirection of *skb* via **bpf_redirect**\ (), + * **bpf_clone_redirect**\ () or other methods outside of BPF may + * interfere with successful delivery to the socket. + * + * This operation is only valid from TC ingress path. + * + * The *flags* argument must be zero. + * Return + * 0 on success, or a negative error in case of failure: + * + * **-EINVAL** if specified *flags* are not supported. + * + * **-ENOENT** if the socket is unavailable for assignment. + * + * **-ENETUNREACH** if the socket is unreachable (wrong netns). + * + * **-EOPNOTSUPP** if the operation is not supported, for example + * a call from outside of TC ingress. + * + * **-ESOCKTNOSUPPORT** if the socket type is not supported + * (reuseport). + * + * long bpf_sk_assign(struct bpf_sk_lookup *ctx, struct bpf_sock *sk, u64 flags) + * Description + * Helper is overloaded depending on BPF program type. This + * description applies to **BPF_PROG_TYPE_SK_LOOKUP** programs. + * + * Select the *sk* as a result of a socket lookup. + * + * For the operation to succeed passed socket must be compatible + * with the packet description provided by the *ctx* object. + * + * L4 protocol (**IPPROTO_TCP** or **IPPROTO_UDP**) must + * be an exact match. While IP family (**AF_INET** or + * **AF_INET6**) must be compatible, that is IPv6 sockets + * that are not v6-only can be selected for IPv4 packets. + * + * Only TCP listeners and UDP unconnected sockets can be + * selected. *sk* can also be NULL to reset any previous + * selection. + * + * *flags* argument can combination of following values: + * + * * **BPF_SK_LOOKUP_F_REPLACE** to override the previous + * socket selection, potentially done by a BPF program + * that ran before us. + * + * * **BPF_SK_LOOKUP_F_NO_REUSEPORT** to skip + * load-balancing within reuseport group for the socket + * being selected. + * + * On success *ctx->sk* will point to the selected socket. + * + * Return + * 0 on success, or a negative errno in case of failure. + * + * * **-EAFNOSUPPORT** if socket family (*sk->family*) is + * not compatible with packet family (*ctx->family*). + * + * * **-EEXIST** if socket has been already selected, + * potentially by another program, and + * **BPF_SK_LOOKUP_F_REPLACE** flag was not specified. + * + * * **-EINVAL** if unsupported flags were specified. + * + * * **-EPROTOTYPE** if socket L4 protocol + * (*sk->protocol*) doesn't match packet protocol + * (*ctx->protocol*). + * + * * **-ESOCKTNOSUPPORT** if socket is not in allowed + * state (TCP listening or UDP unconnected). + * + * u64 bpf_ktime_get_boot_ns(void) + * Description + * Return the time elapsed since system boot, in nanoseconds. + * Does include the time the system was suspended. + * See: **clock_gettime**\ (**CLOCK_BOOTTIME**) + * Return + * Current *ktime*. + * + * long bpf_seq_printf(struct seq_file *m, const char *fmt, u32 fmt_size, const void *data, u32 data_len) + * Description + * **bpf_seq_printf**\ () uses seq_file **seq_printf**\ () to print + * out the format string. + * The *m* represents the seq_file. The *fmt* and *fmt_size* are for + * the format string itself. The *data* and *data_len* are format string + * arguments. The *data* are a **u64** array and corresponding format string + * values are stored in the array. For strings and pointers where pointees + * are accessed, only the pointer values are stored in the *data* array. + * The *data_len* is the size of *data* in bytes. + * + * Formats **%s**, **%p{i,I}{4,6}** requires to read kernel memory. + * Reading kernel memory may fail due to either invalid address or + * valid address but requiring a major memory fault. If reading kernel memory + * fails, the string for **%s** will be an empty string, and the ip + * address for **%p{i,I}{4,6}** will be 0. Not returning error to + * bpf program is consistent with what **bpf_trace_printk**\ () does for now. + * Return + * 0 on success, or a negative error in case of failure: + * + * **-EBUSY** if per-CPU memory copy buffer is busy, can try again + * by returning 1 from bpf program. + * + * **-EINVAL** if arguments are invalid, or if *fmt* is invalid/unsupported. + * + * **-E2BIG** if *fmt* contains too many format specifiers. + * + * **-EOVERFLOW** if an overflow happened: The same object will be tried again. + * + * long bpf_seq_write(struct seq_file *m, const void *data, u32 len) + * Description + * **bpf_seq_write**\ () uses seq_file **seq_write**\ () to write the data. + * The *m* represents the seq_file. The *data* and *len* represent the + * data to write in bytes. + * Return + * 0 on success, or a negative error in case of failure: + * + * **-EOVERFLOW** if an overflow happened: The same object will be tried again. + * + * u64 bpf_sk_cgroup_id(void *sk) + * Description + * Return the cgroup v2 id of the socket *sk*. + * + * *sk* must be a non-**NULL** pointer to a socket, e.g. one + * returned from **bpf_sk_lookup_xxx**\ (), + * **bpf_sk_fullsock**\ (), etc. The format of returned id is + * same as in **bpf_skb_cgroup_id**\ (). + * + * This helper is available only if the kernel was compiled with + * the **CONFIG_SOCK_CGROUP_DATA** configuration option. + * Return + * The id is returned or 0 in case the id could not be retrieved. + * + * u64 bpf_sk_ancestor_cgroup_id(void *sk, int ancestor_level) + * Description + * Return id of cgroup v2 that is ancestor of cgroup associated + * with the *sk* at the *ancestor_level*. The root cgroup is at + * *ancestor_level* zero and each step down the hierarchy + * increments the level. If *ancestor_level* == level of cgroup + * associated with *sk*, then return value will be same as that + * of **bpf_sk_cgroup_id**\ (). + * + * The helper is useful to implement policies based on cgroups + * that are upper in hierarchy than immediate cgroup associated + * with *sk*. + * + * The format of returned id and helper limitations are same as in + * **bpf_sk_cgroup_id**\ (). + * Return + * The id is returned or 0 in case the id could not be retrieved. + * + * long bpf_ringbuf_output(void *ringbuf, void *data, u64 size, u64 flags) + * Description + * Copy *size* bytes from *data* into a ring buffer *ringbuf*. + * If **BPF_RB_NO_WAKEUP** is specified in *flags*, no notification + * of new data availability is sent. + * If **BPF_RB_FORCE_WAKEUP** is specified in *flags*, notification + * of new data availability is sent unconditionally. + * Return + * 0 on success, or a negative error in case of failure. + * + * void *bpf_ringbuf_reserve(void *ringbuf, u64 size, u64 flags) + * Description + * Reserve *size* bytes of payload in a ring buffer *ringbuf*. + * Return + * Valid pointer with *size* bytes of memory available; NULL, + * otherwise. + * + * void bpf_ringbuf_submit(void *data, u64 flags) + * Description + * Submit reserved ring buffer sample, pointed to by *data*. + * If **BPF_RB_NO_WAKEUP** is specified in *flags*, no notification + * of new data availability is sent. + * If **BPF_RB_FORCE_WAKEUP** is specified in *flags*, notification + * of new data availability is sent unconditionally. + * Return + * Nothing. Always succeeds. + * + * void bpf_ringbuf_discard(void *data, u64 flags) + * Description + * Discard reserved ring buffer sample, pointed to by *data*. + * If **BPF_RB_NO_WAKEUP** is specified in *flags*, no notification + * of new data availability is sent. + * If **BPF_RB_FORCE_WAKEUP** is specified in *flags*, notification + * of new data availability is sent unconditionally. + * Return + * Nothing. Always succeeds. + * + * u64 bpf_ringbuf_query(void *ringbuf, u64 flags) + * Description + * Query various characteristics of provided ring buffer. What + * exactly is queries is determined by *flags*: + * + * * **BPF_RB_AVAIL_DATA**: Amount of data not yet consumed. + * * **BPF_RB_RING_SIZE**: The size of ring buffer. + * * **BPF_RB_CONS_POS**: Consumer position (can wrap around). + * * **BPF_RB_PROD_POS**: Producer(s) position (can wrap around). + * + * Data returned is just a momentary snapshot of actual values + * and could be inaccurate, so this facility should be used to + * power heuristics and for reporting, not to make 100% correct + * calculation. + * Return + * Requested value, or 0, if *flags* are not recognized. + * + * long bpf_csum_level(struct sk_buff *skb, u64 level) + * Description + * Change the skbs checksum level by one layer up or down, or + * reset it entirely to none in order to have the stack perform + * checksum validation. The level is applicable to the following + * protocols: TCP, UDP, GRE, SCTP, FCOE. For example, a decap of + * | ETH | IP | UDP | GUE | IP | TCP | into | ETH | IP | TCP | + * through **bpf_skb_adjust_room**\ () helper with passing in + * **BPF_F_ADJ_ROOM_NO_CSUM_RESET** flag would require one call + * to **bpf_csum_level**\ () with **BPF_CSUM_LEVEL_DEC** since + * the UDP header is removed. Similarly, an encap of the latter + * into the former could be accompanied by a helper call to + * **bpf_csum_level**\ () with **BPF_CSUM_LEVEL_INC** if the + * skb is still intended to be processed in higher layers of the + * stack instead of just egressing at tc. + * + * There are three supported level settings at this time: + * + * * **BPF_CSUM_LEVEL_INC**: Increases skb->csum_level for skbs + * with CHECKSUM_UNNECESSARY. + * * **BPF_CSUM_LEVEL_DEC**: Decreases skb->csum_level for skbs + * with CHECKSUM_UNNECESSARY. + * * **BPF_CSUM_LEVEL_RESET**: Resets skb->csum_level to 0 and + * sets CHECKSUM_NONE to force checksum validation by the stack. + * * **BPF_CSUM_LEVEL_QUERY**: No-op, returns the current + * skb->csum_level. + * Return + * 0 on success, or a negative error in case of failure. In the + * case of **BPF_CSUM_LEVEL_QUERY**, the current skb->csum_level + * is returned or the error code -EACCES in case the skb is not + * subject to CHECKSUM_UNNECESSARY. + * + * struct tcp6_sock *bpf_skc_to_tcp6_sock(void *sk) + * Description + * Dynamically cast a *sk* pointer to a *tcp6_sock* pointer. + * Return + * *sk* if casting is valid, or **NULL** otherwise. + * + * struct tcp_sock *bpf_skc_to_tcp_sock(void *sk) + * Description + * Dynamically cast a *sk* pointer to a *tcp_sock* pointer. + * Return + * *sk* if casting is valid, or **NULL** otherwise. + * + * struct tcp_timewait_sock *bpf_skc_to_tcp_timewait_sock(void *sk) + * Description + * Dynamically cast a *sk* pointer to a *tcp_timewait_sock* pointer. + * Return + * *sk* if casting is valid, or **NULL** otherwise. + * + * struct tcp_request_sock *bpf_skc_to_tcp_request_sock(void *sk) + * Description + * Dynamically cast a *sk* pointer to a *tcp_request_sock* pointer. + * Return + * *sk* if casting is valid, or **NULL** otherwise. + * + * struct udp6_sock *bpf_skc_to_udp6_sock(void *sk) + * Description + * Dynamically cast a *sk* pointer to a *udp6_sock* pointer. + * Return + * *sk* if casting is valid, or **NULL** otherwise. + * + * long bpf_get_task_stack(struct task_struct *task, void *buf, u32 size, u64 flags) + * Description + * Return a user or a kernel stack in bpf program provided buffer. + * To achieve this, the helper needs *task*, which is a valid + * pointer to **struct task_struct**. To store the stacktrace, the + * bpf program provides *buf* with a nonnegative *size*. + * + * The last argument, *flags*, holds the number of stack frames to + * skip (from 0 to 255), masked with + * **BPF_F_SKIP_FIELD_MASK**. The next bits can be used to set + * the following flags: + * + * **BPF_F_USER_STACK** + * Collect a user space stack instead of a kernel stack. + * **BPF_F_USER_BUILD_ID** + * Collect buildid+offset instead of ips for user stack, + * only valid if **BPF_F_USER_STACK** is also specified. + * + * **bpf_get_task_stack**\ () can collect up to + * **PERF_MAX_STACK_DEPTH** both kernel and user frames, subject + * to sufficient large buffer size. Note that + * this limit can be controlled with the **sysctl** program, and + * that it should be manually increased in order to profile long + * user stacks (such as stacks for Java programs). To do so, use: + * + * :: + * + * # sysctl kernel.perf_event_max_stack= + * Return + * A non-negative value equal to or less than *size* on success, + * or a negative error in case of failure. + * + * long bpf_load_hdr_opt(struct bpf_sock_ops *skops, void *searchby_res, u32 len, u64 flags) + * Description + * Load header option. Support reading a particular TCP header + * option for bpf program (**BPF_PROG_TYPE_SOCK_OPS**). + * + * If *flags* is 0, it will search the option from the + * *skops*\ **->skb_data**. The comment in **struct bpf_sock_ops** + * has details on what skb_data contains under different + * *skops*\ **->op**. + * + * The first byte of the *searchby_res* specifies the + * kind that it wants to search. + * + * If the searching kind is an experimental kind + * (i.e. 253 or 254 according to RFC6994). It also + * needs to specify the "magic" which is either + * 2 bytes or 4 bytes. It then also needs to + * specify the size of the magic by using + * the 2nd byte which is "kind-length" of a TCP + * header option and the "kind-length" also + * includes the first 2 bytes "kind" and "kind-length" + * itself as a normal TCP header option also does. + * + * For example, to search experimental kind 254 with + * 2 byte magic 0xeB9F, the searchby_res should be + * [ 254, 4, 0xeB, 0x9F, 0, 0, .... 0 ]. + * + * To search for the standard window scale option (3), + * the *searchby_res* should be [ 3, 0, 0, .... 0 ]. + * Note, kind-length must be 0 for regular option. + * + * Searching for No-Op (0) and End-of-Option-List (1) are + * not supported. + * + * *len* must be at least 2 bytes which is the minimal size + * of a header option. + * + * Supported flags: + * + * * **BPF_LOAD_HDR_OPT_TCP_SYN** to search from the + * saved_syn packet or the just-received syn packet. + * + * Return + * > 0 when found, the header option is copied to *searchby_res*. + * The return value is the total length copied. On failure, a + * negative error code is returned: + * + * **-EINVAL** if a parameter is invalid. + * + * **-ENOMSG** if the option is not found. + * + * **-ENOENT** if no syn packet is available when + * **BPF_LOAD_HDR_OPT_TCP_SYN** is used. + * + * **-ENOSPC** if there is not enough space. Only *len* number of + * bytes are copied. + * + * **-EFAULT** on failure to parse the header options in the + * packet. + * + * **-EPERM** if the helper cannot be used under the current + * *skops*\ **->op**. + * + * long bpf_store_hdr_opt(struct bpf_sock_ops *skops, const void *from, u32 len, u64 flags) + * Description + * Store header option. The data will be copied + * from buffer *from* with length *len* to the TCP header. + * + * The buffer *from* should have the whole option that + * includes the kind, kind-length, and the actual + * option data. The *len* must be at least kind-length + * long. The kind-length does not have to be 4 byte + * aligned. The kernel will take care of the padding + * and setting the 4 bytes aligned value to th->doff. + * + * This helper will check for duplicated option + * by searching the same option in the outgoing skb. + * + * This helper can only be called during + * **BPF_SOCK_OPS_WRITE_HDR_OPT_CB**. + * + * Return + * 0 on success, or negative error in case of failure: + * + * **-EINVAL** If param is invalid. + * + * **-ENOSPC** if there is not enough space in the header. + * Nothing has been written + * + * **-EEXIST** if the option already exists. + * + * **-EFAULT** on failrue to parse the existing header options. + * + * **-EPERM** if the helper cannot be used under the current + * *skops*\ **->op**. + * + * long bpf_reserve_hdr_opt(struct bpf_sock_ops *skops, u32 len, u64 flags) + * Description + * Reserve *len* bytes for the bpf header option. The + * space will be used by **bpf_store_hdr_opt**\ () later in + * **BPF_SOCK_OPS_WRITE_HDR_OPT_CB**. + * + * If **bpf_reserve_hdr_opt**\ () is called multiple times, + * the total number of bytes will be reserved. + * + * This helper can only be called during + * **BPF_SOCK_OPS_HDR_OPT_LEN_CB**. + * + * Return + * 0 on success, or negative error in case of failure: + * + * **-EINVAL** if a parameter is invalid. + * + * **-ENOSPC** if there is not enough space in the header. + * + * **-EPERM** if the helper cannot be used under the current + * *skops*\ **->op**. + * + * void *bpf_inode_storage_get(struct bpf_map *map, void *inode, void *value, u64 flags) + * Description + * Get a bpf_local_storage from an *inode*. + * + * Logically, it could be thought of as getting the value from + * a *map* with *inode* as the **key**. From this + * perspective, the usage is not much different from + * **bpf_map_lookup_elem**\ (*map*, **&**\ *inode*) except this + * helper enforces the key must be an inode and the map must also + * be a **BPF_MAP_TYPE_INODE_STORAGE**. + * + * Underneath, the value is stored locally at *inode* instead of + * the *map*. The *map* is used as the bpf-local-storage + * "type". The bpf-local-storage "type" (i.e. the *map*) is + * searched against all bpf_local_storage residing at *inode*. + * + * An optional *flags* (**BPF_LOCAL_STORAGE_GET_F_CREATE**) can be + * used such that a new bpf_local_storage will be + * created if one does not exist. *value* can be used + * together with **BPF_LOCAL_STORAGE_GET_F_CREATE** to specify + * the initial value of a bpf_local_storage. If *value* is + * **NULL**, the new bpf_local_storage will be zero initialized. + * Return + * A bpf_local_storage pointer is returned on success. + * + * **NULL** if not found or there was an error in adding + * a new bpf_local_storage. + * + * int bpf_inode_storage_delete(struct bpf_map *map, void *inode) + * Description + * Delete a bpf_local_storage from an *inode*. + * Return + * 0 on success. + * + * **-ENOENT** if the bpf_local_storage cannot be found. + * + * long bpf_d_path(struct path *path, char *buf, u32 sz) + * Description + * Return full path for given **struct path** object, which + * needs to be the kernel BTF *path* object. The path is + * returned in the provided buffer *buf* of size *sz* and + * is zero terminated. + * + * Return + * On success, the strictly positive length of the string, + * including the trailing NUL character. On error, a negative + * value. + * + * long bpf_copy_from_user(void *dst, u32 size, const void *user_ptr) + * Description + * Read *size* bytes from user space address *user_ptr* and store + * the data in *dst*. This is a wrapper of **copy_from_user**\ (). + * Return + * 0 on success, or a negative error in case of failure. + * + * long bpf_snprintf_btf(char *str, u32 str_size, struct btf_ptr *ptr, u32 btf_ptr_size, u64 flags) + * Description + * Use BTF to store a string representation of *ptr*->ptr in *str*, + * using *ptr*->type_id. This value should specify the type + * that *ptr*->ptr points to. LLVM __builtin_btf_type_id(type, 1) + * can be used to look up vmlinux BTF type ids. Traversing the + * data structure using BTF, the type information and values are + * stored in the first *str_size* - 1 bytes of *str*. Safe copy of + * the pointer data is carried out to avoid kernel crashes during + * operation. Smaller types can use string space on the stack; + * larger programs can use map data to store the string + * representation. + * + * The string can be subsequently shared with userspace via + * bpf_perf_event_output() or ring buffer interfaces. + * bpf_trace_printk() is to be avoided as it places too small + * a limit on string size to be useful. + * + * *flags* is a combination of + * + * **BTF_F_COMPACT** + * no formatting around type information + * **BTF_F_NONAME** + * no struct/union member names/types + * **BTF_F_PTR_RAW** + * show raw (unobfuscated) pointer values; + * equivalent to printk specifier %px. + * **BTF_F_ZERO** + * show zero-valued struct/union members; they + * are not displayed by default + * + * Return + * The number of bytes that were written (or would have been + * written if output had to be truncated due to string size), + * or a negative error in cases of failure. + * + * long bpf_seq_printf_btf(struct seq_file *m, struct btf_ptr *ptr, u32 ptr_size, u64 flags) + * Description + * Use BTF to write to seq_write a string representation of + * *ptr*->ptr, using *ptr*->type_id as per bpf_snprintf_btf(). + * *flags* are identical to those used for bpf_snprintf_btf. + * Return + * 0 on success or a negative error in case of failure. + * + * u64 bpf_skb_cgroup_classid(struct sk_buff *skb) + * Description + * See **bpf_get_cgroup_classid**\ () for the main description. + * This helper differs from **bpf_get_cgroup_classid**\ () in that + * the cgroup v1 net_cls class is retrieved only from the *skb*'s + * associated socket instead of the current process. + * Return + * The id is returned or 0 in case the id could not be retrieved. + * + * long bpf_redirect_neigh(u32 ifindex, struct bpf_redir_neigh *params, int plen, u64 flags) + * Description + * Redirect the packet to another net device of index *ifindex* + * and fill in L2 addresses from neighboring subsystem. This helper + * is somewhat similar to **bpf_redirect**\ (), except that it + * populates L2 addresses as well, meaning, internally, the helper + * relies on the neighbor lookup for the L2 address of the nexthop. + * + * The helper will perform a FIB lookup based on the skb's + * networking header to get the address of the next hop, unless + * this is supplied by the caller in the *params* argument. The + * *plen* argument indicates the len of *params* and should be set + * to 0 if *params* is NULL. + * + * The *flags* argument is reserved and must be 0. The helper is + * currently only supported for tc BPF program types, and enabled + * for IPv4 and IPv6 protocols. + * Return + * The helper returns **TC_ACT_REDIRECT** on success or + * **TC_ACT_SHOT** on error. + * + * void *bpf_per_cpu_ptr(const void *percpu_ptr, u32 cpu) + * Description + * Take a pointer to a percpu ksym, *percpu_ptr*, and return a + * pointer to the percpu kernel variable on *cpu*. A ksym is an + * extern variable decorated with '__ksym'. For ksym, there is a + * global var (either static or global) defined of the same name + * in the kernel. The ksym is percpu if the global var is percpu. + * The returned pointer points to the global percpu var on *cpu*. + * + * bpf_per_cpu_ptr() has the same semantic as per_cpu_ptr() in the + * kernel, except that bpf_per_cpu_ptr() may return NULL. This + * happens if *cpu* is larger than nr_cpu_ids. The caller of + * bpf_per_cpu_ptr() must check the returned value. + * Return + * A pointer pointing to the kernel percpu variable on *cpu*, or + * NULL, if *cpu* is invalid. + * + * void *bpf_this_cpu_ptr(const void *percpu_ptr) + * Description + * Take a pointer to a percpu ksym, *percpu_ptr*, and return a + * pointer to the percpu kernel variable on this cpu. See the + * description of 'ksym' in **bpf_per_cpu_ptr**\ (). + * + * bpf_this_cpu_ptr() has the same semantic as this_cpu_ptr() in + * the kernel. Different from **bpf_per_cpu_ptr**\ (), it would + * never return NULL. + * Return + * A pointer pointing to the kernel percpu variable on this cpu. + * + * long bpf_redirect_peer(u32 ifindex, u64 flags) + * Description + * Redirect the packet to another net device of index *ifindex*. + * This helper is somewhat similar to **bpf_redirect**\ (), except + * that the redirection happens to the *ifindex*' peer device and + * the netns switch takes place from ingress to ingress without + * going through the CPU's backlog queue. + * + * The *flags* argument is reserved and must be 0. The helper is + * currently only supported for tc BPF program types at the ingress + * hook and for veth device types. The peer device must reside in a + * different network namespace. + * Return + * The helper returns **TC_ACT_REDIRECT** on success or + * **TC_ACT_SHOT** on error. + */ +#define __BPF_FUNC_MAPPER(FN) \ + FN(unspec), \ + FN(map_lookup_elem), \ + FN(map_update_elem), \ + FN(map_delete_elem), \ + FN(probe_read), \ + FN(ktime_get_ns), \ + FN(trace_printk), \ + FN(get_prandom_u32), \ + FN(get_smp_processor_id), \ + FN(skb_store_bytes), \ + FN(l3_csum_replace), \ + FN(l4_csum_replace), \ + FN(tail_call), \ + FN(clone_redirect), \ + FN(get_current_pid_tgid), \ + FN(get_current_uid_gid), \ + FN(get_current_comm), \ + FN(get_cgroup_classid), \ + FN(skb_vlan_push), \ + FN(skb_vlan_pop), \ + FN(skb_get_tunnel_key), \ + FN(skb_set_tunnel_key), \ + FN(perf_event_read), \ + FN(redirect), \ + FN(get_route_realm), \ + FN(perf_event_output), \ + FN(skb_load_bytes), \ + FN(get_stackid), \ + FN(csum_diff), \ + FN(skb_get_tunnel_opt), \ + FN(skb_set_tunnel_opt), \ + FN(skb_change_proto), \ + FN(skb_change_type), \ + FN(skb_under_cgroup), \ + FN(get_hash_recalc), \ + FN(get_current_task), \ + FN(probe_write_user), \ + FN(current_task_under_cgroup), \ + FN(skb_change_tail), \ + FN(skb_pull_data), \ + FN(csum_update), \ + FN(set_hash_invalid), \ + FN(get_numa_node_id), \ + FN(skb_change_head), \ + FN(xdp_adjust_head), \ + FN(probe_read_str), \ + FN(get_socket_cookie), \ + FN(get_socket_uid), \ + FN(set_hash), \ + FN(setsockopt), \ + FN(skb_adjust_room), \ + FN(redirect_map), \ + FN(sk_redirect_map), \ + FN(sock_map_update), \ + FN(xdp_adjust_meta), \ + FN(perf_event_read_value), \ + FN(perf_prog_read_value), \ + FN(getsockopt), \ + FN(override_return), \ + FN(sock_ops_cb_flags_set), \ + FN(msg_redirect_map), \ + FN(msg_apply_bytes), \ + FN(msg_cork_bytes), \ + FN(msg_pull_data), \ + FN(bind), \ + FN(xdp_adjust_tail), \ + FN(skb_get_xfrm_state), \ + FN(get_stack), \ + FN(skb_load_bytes_relative), \ + FN(fib_lookup), \ + FN(sock_hash_update), \ + FN(msg_redirect_hash), \ + FN(sk_redirect_hash), \ + FN(lwt_push_encap), \ + FN(lwt_seg6_store_bytes), \ + FN(lwt_seg6_adjust_srh), \ + FN(lwt_seg6_action), \ + FN(rc_repeat), \ + FN(rc_keydown), \ + FN(skb_cgroup_id), \ + FN(get_current_cgroup_id), \ + FN(get_local_storage), \ + FN(sk_select_reuseport), \ + FN(skb_ancestor_cgroup_id), \ + FN(sk_lookup_tcp), \ + FN(sk_lookup_udp), \ + FN(sk_release), \ + FN(map_push_elem), \ + FN(map_pop_elem), \ + FN(map_peek_elem), \ + FN(msg_push_data), \ + FN(msg_pop_data), \ + FN(rc_pointer_rel), \ + FN(spin_lock), \ + FN(spin_unlock), \ + FN(sk_fullsock), \ + FN(tcp_sock), \ + FN(skb_ecn_set_ce), \ + FN(get_listener_sock), \ + FN(skc_lookup_tcp), \ + FN(tcp_check_syncookie), \ + FN(sysctl_get_name), \ + FN(sysctl_get_current_value), \ + FN(sysctl_get_new_value), \ + FN(sysctl_set_new_value), \ + FN(strtol), \ + FN(strtoul), \ + FN(sk_storage_get), \ + FN(sk_storage_delete), \ + FN(send_signal), \ + FN(tcp_gen_syncookie), \ + FN(skb_output), \ + FN(probe_read_user), \ + FN(probe_read_kernel), \ + FN(probe_read_user_str), \ + FN(probe_read_kernel_str), \ + FN(tcp_send_ack), \ + FN(send_signal_thread), \ + FN(jiffies64), \ + FN(read_branch_records), \ + FN(get_ns_current_pid_tgid), \ + FN(xdp_output), \ + FN(get_netns_cookie), \ + FN(get_current_ancestor_cgroup_id), \ + FN(sk_assign), \ + FN(ktime_get_boot_ns), \ + FN(seq_printf), \ + FN(seq_write), \ + FN(sk_cgroup_id), \ + FN(sk_ancestor_cgroup_id), \ + FN(ringbuf_output), \ + FN(ringbuf_reserve), \ + FN(ringbuf_submit), \ + FN(ringbuf_discard), \ + FN(ringbuf_query), \ + FN(csum_level), \ + FN(skc_to_tcp6_sock), \ + FN(skc_to_tcp_sock), \ + FN(skc_to_tcp_timewait_sock), \ + FN(skc_to_tcp_request_sock), \ + FN(skc_to_udp6_sock), \ + FN(get_task_stack), \ + FN(load_hdr_opt), \ + FN(store_hdr_opt), \ + FN(reserve_hdr_opt), \ + FN(inode_storage_get), \ + FN(inode_storage_delete), \ + FN(d_path), \ + FN(copy_from_user), \ + FN(snprintf_btf), \ + FN(seq_printf_btf), \ + FN(skb_cgroup_classid), \ + FN(redirect_neigh), \ + FN(per_cpu_ptr), \ + FN(this_cpu_ptr), \ + FN(redirect_peer), \ + /* */ + +/* integer value in 'imm' field of BPF_CALL instruction selects which helper + * function eBPF program intends to call + */ +#define __BPF_ENUM_FN(x) BPF_FUNC_ ## x +enum bpf_func_id { + __BPF_FUNC_MAPPER(__BPF_ENUM_FN) + __BPF_FUNC_MAX_ID, +}; +#undef __BPF_ENUM_FN + +/* All flags used by eBPF helper functions, placed here. */ + +/* BPF_FUNC_skb_store_bytes flags. */ +enum { + BPF_F_RECOMPUTE_CSUM = (1ULL << 0), + BPF_F_INVALIDATE_HASH = (1ULL << 1), +}; + +/* BPF_FUNC_l3_csum_replace and BPF_FUNC_l4_csum_replace flags. + * First 4 bits are for passing the header field size. + */ +enum { + BPF_F_HDR_FIELD_MASK = 0xfULL, +}; + +/* BPF_FUNC_l4_csum_replace flags. */ +enum { + BPF_F_PSEUDO_HDR = (1ULL << 4), + BPF_F_MARK_MANGLED_0 = (1ULL << 5), + BPF_F_MARK_ENFORCE = (1ULL << 6), +}; + +/* BPF_FUNC_clone_redirect and BPF_FUNC_redirect flags. */ +enum { + BPF_F_INGRESS = (1ULL << 0), +}; + +/* BPF_FUNC_skb_set_tunnel_key and BPF_FUNC_skb_get_tunnel_key flags. */ +enum { + BPF_F_TUNINFO_IPV6 = (1ULL << 0), +}; + +/* flags for both BPF_FUNC_get_stackid and BPF_FUNC_get_stack. */ +enum { + BPF_F_SKIP_FIELD_MASK = 0xffULL, + BPF_F_USER_STACK = (1ULL << 8), +/* flags used by BPF_FUNC_get_stackid only. */ + BPF_F_FAST_STACK_CMP = (1ULL << 9), + BPF_F_REUSE_STACKID = (1ULL << 10), +/* flags used by BPF_FUNC_get_stack only. */ + BPF_F_USER_BUILD_ID = (1ULL << 11), +}; + +/* BPF_FUNC_skb_set_tunnel_key flags. */ +enum { + BPF_F_ZERO_CSUM_TX = (1ULL << 1), + BPF_F_DONT_FRAGMENT = (1ULL << 2), + BPF_F_SEQ_NUMBER = (1ULL << 3), +}; + +/* BPF_FUNC_perf_event_output, BPF_FUNC_perf_event_read and + * BPF_FUNC_perf_event_read_value flags. + */ +enum { + BPF_F_INDEX_MASK = 0xffffffffULL, + BPF_F_CURRENT_CPU = BPF_F_INDEX_MASK, +/* BPF_FUNC_perf_event_output for sk_buff input context. */ + BPF_F_CTXLEN_MASK = (0xfffffULL << 32), +}; + +/* Current network namespace */ +enum { + BPF_F_CURRENT_NETNS = (-1L), +}; + +/* BPF_FUNC_csum_level level values. */ +enum { + BPF_CSUM_LEVEL_QUERY, + BPF_CSUM_LEVEL_INC, + BPF_CSUM_LEVEL_DEC, + BPF_CSUM_LEVEL_RESET, +}; + +/* BPF_FUNC_skb_adjust_room flags. */ +enum { + BPF_F_ADJ_ROOM_FIXED_GSO = (1ULL << 0), + BPF_F_ADJ_ROOM_ENCAP_L3_IPV4 = (1ULL << 1), + BPF_F_ADJ_ROOM_ENCAP_L3_IPV6 = (1ULL << 2), + BPF_F_ADJ_ROOM_ENCAP_L4_GRE = (1ULL << 3), + BPF_F_ADJ_ROOM_ENCAP_L4_UDP = (1ULL << 4), + BPF_F_ADJ_ROOM_NO_CSUM_RESET = (1ULL << 5), +}; + +enum { + BPF_ADJ_ROOM_ENCAP_L2_MASK = 0xff, + BPF_ADJ_ROOM_ENCAP_L2_SHIFT = 56, +}; + +#define BPF_F_ADJ_ROOM_ENCAP_L2(len) (((__u64)len & \ + BPF_ADJ_ROOM_ENCAP_L2_MASK) \ + << BPF_ADJ_ROOM_ENCAP_L2_SHIFT) + +/* BPF_FUNC_sysctl_get_name flags. */ +enum { + BPF_F_SYSCTL_BASE_NAME = (1ULL << 0), +}; + +/* BPF_FUNC__storage_get flags */ +enum { + BPF_LOCAL_STORAGE_GET_F_CREATE = (1ULL << 0), + /* BPF_SK_STORAGE_GET_F_CREATE is only kept for backward compatibility + * and BPF_LOCAL_STORAGE_GET_F_CREATE must be used instead. + */ + BPF_SK_STORAGE_GET_F_CREATE = BPF_LOCAL_STORAGE_GET_F_CREATE, +}; + +/* BPF_FUNC_read_branch_records flags. */ +enum { + BPF_F_GET_BRANCH_RECORDS_SIZE = (1ULL << 0), +}; + +/* BPF_FUNC_bpf_ringbuf_commit, BPF_FUNC_bpf_ringbuf_discard, and + * BPF_FUNC_bpf_ringbuf_output flags. + */ +enum { + BPF_RB_NO_WAKEUP = (1ULL << 0), + BPF_RB_FORCE_WAKEUP = (1ULL << 1), +}; + +/* BPF_FUNC_bpf_ringbuf_query flags */ +enum { + BPF_RB_AVAIL_DATA = 0, + BPF_RB_RING_SIZE = 1, + BPF_RB_CONS_POS = 2, + BPF_RB_PROD_POS = 3, +}; + +/* BPF ring buffer constants */ +enum { + BPF_RINGBUF_BUSY_BIT = (1U << 31), + BPF_RINGBUF_DISCARD_BIT = (1U << 30), + BPF_RINGBUF_HDR_SZ = 8, +}; + +/* BPF_FUNC_sk_assign flags in bpf_sk_lookup context. */ +enum { + BPF_SK_LOOKUP_F_REPLACE = (1ULL << 0), + BPF_SK_LOOKUP_F_NO_REUSEPORT = (1ULL << 1), +}; + +/* Mode for BPF_FUNC_skb_adjust_room helper. */ +enum bpf_adj_room_mode { + BPF_ADJ_ROOM_NET, + BPF_ADJ_ROOM_MAC, +}; + +/* Mode for BPF_FUNC_skb_load_bytes_relative helper. */ +enum bpf_hdr_start_off { + BPF_HDR_START_MAC, + BPF_HDR_START_NET, +}; + +/* Encapsulation type for BPF_FUNC_lwt_push_encap helper. */ +enum bpf_lwt_encap_mode { + BPF_LWT_ENCAP_SEG6, + BPF_LWT_ENCAP_SEG6_INLINE, + BPF_LWT_ENCAP_IP, +}; + +#define __bpf_md_ptr(type, name) \ +union { \ + type name; \ + __u64 :64; \ +} __attribute__((aligned(8))) + +/* user accessible mirror of in-kernel sk_buff. + * new fields can only be added to the end of this structure + */ +struct __sk_buff { + __u32 len; + __u32 pkt_type; + __u32 mark; + __u32 queue_mapping; + __u32 protocol; + __u32 vlan_present; + __u32 vlan_tci; + __u32 vlan_proto; + __u32 priority; + __u32 ingress_ifindex; + __u32 ifindex; + __u32 tc_index; + __u32 cb[5]; + __u32 hash; + __u32 tc_classid; + __u32 data; + __u32 data_end; + __u32 napi_id; + + /* Accessed by BPF_PROG_TYPE_sk_skb types from here to ... */ + __u32 family; + __u32 remote_ip4; /* Stored in network byte order */ + __u32 local_ip4; /* Stored in network byte order */ + __u32 remote_ip6[4]; /* Stored in network byte order */ + __u32 local_ip6[4]; /* Stored in network byte order */ + __u32 remote_port; /* Stored in network byte order */ + __u32 local_port; /* stored in host byte order */ + /* ... here. */ + + __u32 data_meta; + __bpf_md_ptr(struct bpf_flow_keys *, flow_keys); + __u64 tstamp; + __u32 wire_len; + __u32 gso_segs; + __bpf_md_ptr(struct bpf_sock *, sk); + __u32 gso_size; +}; + +struct bpf_tunnel_key { + __u32 tunnel_id; + union { + __u32 remote_ipv4; + __u32 remote_ipv6[4]; + }; + __u8 tunnel_tos; + __u8 tunnel_ttl; + __u16 tunnel_ext; /* Padding, future use. */ + __u32 tunnel_label; +}; + +/* user accessible mirror of in-kernel xfrm_state. + * new fields can only be added to the end of this structure + */ +struct bpf_xfrm_state { + __u32 reqid; + __u32 spi; /* Stored in network byte order */ + __u16 family; + __u16 ext; /* Padding, future use. */ + union { + __u32 remote_ipv4; /* Stored in network byte order */ + __u32 remote_ipv6[4]; /* Stored in network byte order */ + }; +}; + +/* Generic BPF return codes which all BPF program types may support. + * The values are binary compatible with their TC_ACT_* counter-part to + * provide backwards compatibility with existing SCHED_CLS and SCHED_ACT + * programs. + * + * XDP is handled seprately, see XDP_*. + */ +enum bpf_ret_code { + BPF_OK = 0, + /* 1 reserved */ + BPF_DROP = 2, + /* 3-6 reserved */ + BPF_REDIRECT = 7, + /* >127 are reserved for prog type specific return codes. + * + * BPF_LWT_REROUTE: used by BPF_PROG_TYPE_LWT_IN and + * BPF_PROG_TYPE_LWT_XMIT to indicate that skb had been + * changed and should be routed based on its new L3 header. + * (This is an L3 redirect, as opposed to L2 redirect + * represented by BPF_REDIRECT above). + */ + BPF_LWT_REROUTE = 128, +}; + +struct bpf_sock { + __u32 bound_dev_if; + __u32 family; + __u32 type; + __u32 protocol; + __u32 mark; + __u32 priority; + /* IP address also allows 1 and 2 bytes access */ + __u32 src_ip4; + __u32 src_ip6[4]; + __u32 src_port; /* host byte order */ + __u32 dst_port; /* network byte order */ + __u32 dst_ip4; + __u32 dst_ip6[4]; + __u32 state; + __s32 rx_queue_mapping; +}; + +struct bpf_tcp_sock { + __u32 snd_cwnd; /* Sending congestion window */ + __u32 srtt_us; /* smoothed round trip time << 3 in usecs */ + __u32 rtt_min; + __u32 snd_ssthresh; /* Slow start size threshold */ + __u32 rcv_nxt; /* What we want to receive next */ + __u32 snd_nxt; /* Next sequence we send */ + __u32 snd_una; /* First byte we want an ack for */ + __u32 mss_cache; /* Cached effective mss, not including SACKS */ + __u32 ecn_flags; /* ECN status bits. */ + __u32 rate_delivered; /* saved rate sample: packets delivered */ + __u32 rate_interval_us; /* saved rate sample: time elapsed */ + __u32 packets_out; /* Packets which are "in flight" */ + __u32 retrans_out; /* Retransmitted packets out */ + __u32 total_retrans; /* Total retransmits for entire connection */ + __u32 segs_in; /* RFC4898 tcpEStatsPerfSegsIn + * total number of segments in. + */ + __u32 data_segs_in; /* RFC4898 tcpEStatsPerfDataSegsIn + * total number of data segments in. + */ + __u32 segs_out; /* RFC4898 tcpEStatsPerfSegsOut + * The total number of segments sent. + */ + __u32 data_segs_out; /* RFC4898 tcpEStatsPerfDataSegsOut + * total number of data segments sent. + */ + __u32 lost_out; /* Lost packets */ + __u32 sacked_out; /* SACK'd packets */ + __u64 bytes_received; /* RFC4898 tcpEStatsAppHCThruOctetsReceived + * sum(delta(rcv_nxt)), or how many bytes + * were acked. + */ + __u64 bytes_acked; /* RFC4898 tcpEStatsAppHCThruOctetsAcked + * sum(delta(snd_una)), or how many bytes + * were acked. + */ + __u32 dsack_dups; /* RFC4898 tcpEStatsStackDSACKDups + * total number of DSACK blocks received + */ + __u32 delivered; /* Total data packets delivered incl. rexmits */ + __u32 delivered_ce; /* Like the above but only ECE marked packets */ + __u32 icsk_retransmits; /* Number of unrecovered [RTO] timeouts */ +}; + +struct bpf_sock_tuple { + union { + struct { + __be32 saddr; + __be32 daddr; + __be16 sport; + __be16 dport; + } ipv4; + struct { + __be32 saddr[4]; + __be32 daddr[4]; + __be16 sport; + __be16 dport; + } ipv6; + }; +}; + +struct bpf_xdp_sock { + __u32 queue_id; +}; + +#define XDP_PACKET_HEADROOM 256 + +/* User return codes for XDP prog type. + * A valid XDP program must return one of these defined values. All other + * return codes are reserved for future use. Unknown return codes will + * result in packet drops and a warning via bpf_warn_invalid_xdp_action(). + */ +enum xdp_action { + XDP_ABORTED = 0, + XDP_DROP, + XDP_PASS, + XDP_TX, + XDP_REDIRECT, +}; + +/* user accessible metadata for XDP packet hook + * new fields must be added to the end of this structure + */ +struct xdp_md { + __u32 data; + __u32 data_end; + __u32 data_meta; + /* Below access go through struct xdp_rxq_info */ + __u32 ingress_ifindex; /* rxq->dev->ifindex */ + __u32 rx_queue_index; /* rxq->queue_index */ + + __u32 egress_ifindex; /* txq->dev->ifindex */ +}; + +/* DEVMAP map-value layout + * + * The struct data-layout of map-value is a configuration interface. + * New members can only be added to the end of this structure. + */ +struct bpf_devmap_val { + __u32 ifindex; /* device index */ + union { + int fd; /* prog fd on map write */ + __u32 id; /* prog id on map read */ + } bpf_prog; +}; + +/* CPUMAP map-value layout + * + * The struct data-layout of map-value is a configuration interface. + * New members can only be added to the end of this structure. + */ +struct bpf_cpumap_val { + __u32 qsize; /* queue size to remote target CPU */ + union { + int fd; /* prog fd on map write */ + __u32 id; /* prog id on map read */ + } bpf_prog; +}; + +enum sk_action { + SK_DROP = 0, + SK_PASS, +}; + +/* user accessible metadata for SK_MSG packet hook, new fields must + * be added to the end of this structure + */ +struct sk_msg_md { + __bpf_md_ptr(void *, data); + __bpf_md_ptr(void *, data_end); + + __u32 family; + __u32 remote_ip4; /* Stored in network byte order */ + __u32 local_ip4; /* Stored in network byte order */ + __u32 remote_ip6[4]; /* Stored in network byte order */ + __u32 local_ip6[4]; /* Stored in network byte order */ + __u32 remote_port; /* Stored in network byte order */ + __u32 local_port; /* stored in host byte order */ + __u32 size; /* Total size of sk_msg */ + + __bpf_md_ptr(struct bpf_sock *, sk); /* current socket */ +}; + +struct sk_reuseport_md { + /* + * Start of directly accessible data. It begins from + * the tcp/udp header. + */ + __bpf_md_ptr(void *, data); + /* End of directly accessible data */ + __bpf_md_ptr(void *, data_end); + /* + * Total length of packet (starting from the tcp/udp header). + * Note that the directly accessible bytes (data_end - data) + * could be less than this "len". Those bytes could be + * indirectly read by a helper "bpf_skb_load_bytes()". + */ + __u32 len; + /* + * Eth protocol in the mac header (network byte order). e.g. + * ETH_P_IP(0x0800) and ETH_P_IPV6(0x86DD) + */ + __u32 eth_protocol; + __u32 ip_protocol; /* IP protocol. e.g. IPPROTO_TCP, IPPROTO_UDP */ + __u32 bind_inany; /* Is sock bound to an INANY address? */ + __u32 hash; /* A hash of the packet 4 tuples */ +}; + +#define BPF_TAG_SIZE 8 + +struct bpf_prog_info { + __u32 type; + __u32 id; + __u8 tag[BPF_TAG_SIZE]; + __u32 jited_prog_len; + __u32 xlated_prog_len; + __aligned_u64 jited_prog_insns; + __aligned_u64 xlated_prog_insns; + __u64 load_time; /* ns since boottime */ + __u32 created_by_uid; + __u32 nr_map_ids; + __aligned_u64 map_ids; + char name[BPF_OBJ_NAME_LEN]; + __u32 ifindex; + __u32 gpl_compatible:1; + __u32 :31; /* alignment pad */ + __u64 netns_dev; + __u64 netns_ino; + __u32 nr_jited_ksyms; + __u32 nr_jited_func_lens; + __aligned_u64 jited_ksyms; + __aligned_u64 jited_func_lens; + __u32 btf_id; + __u32 func_info_rec_size; + __aligned_u64 func_info; + __u32 nr_func_info; + __u32 nr_line_info; + __aligned_u64 line_info; + __aligned_u64 jited_line_info; + __u32 nr_jited_line_info; + __u32 line_info_rec_size; + __u32 jited_line_info_rec_size; + __u32 nr_prog_tags; + __aligned_u64 prog_tags; + __u64 run_time_ns; + __u64 run_cnt; +} __attribute__((aligned(8))); + +struct bpf_map_info { + __u32 type; + __u32 id; + __u32 key_size; + __u32 value_size; + __u32 max_entries; + __u32 map_flags; + char name[BPF_OBJ_NAME_LEN]; + __u32 ifindex; + __u32 btf_vmlinux_value_type_id; + __u64 netns_dev; + __u64 netns_ino; + __u32 btf_id; + __u32 btf_key_type_id; + __u32 btf_value_type_id; +} __attribute__((aligned(8))); + +struct bpf_btf_info { + __aligned_u64 btf; + __u32 btf_size; + __u32 id; +} __attribute__((aligned(8))); + +struct bpf_link_info { + __u32 type; + __u32 id; + __u32 prog_id; + union { + struct { + __aligned_u64 tp_name; /* in/out: tp_name buffer ptr */ + __u32 tp_name_len; /* in/out: tp_name buffer len */ + } raw_tracepoint; + struct { + __u32 attach_type; + } tracing; + struct { + __u64 cgroup_id; + __u32 attach_type; + } cgroup; + struct { + __aligned_u64 target_name; /* in/out: target_name buffer ptr */ + __u32 target_name_len; /* in/out: target_name buffer len */ + union { + struct { + __u32 map_id; + } map; + }; + } iter; + struct { + __u32 netns_ino; + __u32 attach_type; + } netns; + struct { + __u32 ifindex; + } xdp; + }; +} __attribute__((aligned(8))); + +/* User bpf_sock_addr struct to access socket fields and sockaddr struct passed + * by user and intended to be used by socket (e.g. to bind to, depends on + * attach type). + */ +struct bpf_sock_addr { + __u32 user_family; /* Allows 4-byte read, but no write. */ + __u32 user_ip4; /* Allows 1,2,4-byte read and 4-byte write. + * Stored in network byte order. + */ + __u32 user_ip6[4]; /* Allows 1,2,4,8-byte read and 4,8-byte write. + * Stored in network byte order. + */ + __u32 user_port; /* Allows 1,2,4-byte read and 4-byte write. + * Stored in network byte order + */ + __u32 family; /* Allows 4-byte read, but no write */ + __u32 type; /* Allows 4-byte read, but no write */ + __u32 protocol; /* Allows 4-byte read, but no write */ + __u32 msg_src_ip4; /* Allows 1,2,4-byte read and 4-byte write. + * Stored in network byte order. + */ + __u32 msg_src_ip6[4]; /* Allows 1,2,4,8-byte read and 4,8-byte write. + * Stored in network byte order. + */ + __bpf_md_ptr(struct bpf_sock *, sk); +}; + +/* User bpf_sock_ops struct to access socket values and specify request ops + * and their replies. + * Some of this fields are in network (bigendian) byte order and may need + * to be converted before use (bpf_ntohl() defined in samples/bpf/bpf_endian.h). + * New fields can only be added at the end of this structure + */ +struct bpf_sock_ops { + __u32 op; + union { + __u32 args[4]; /* Optionally passed to bpf program */ + __u32 reply; /* Returned by bpf program */ + __u32 replylong[4]; /* Optionally returned by bpf prog */ + }; + __u32 family; + __u32 remote_ip4; /* Stored in network byte order */ + __u32 local_ip4; /* Stored in network byte order */ + __u32 remote_ip6[4]; /* Stored in network byte order */ + __u32 local_ip6[4]; /* Stored in network byte order */ + __u32 remote_port; /* Stored in network byte order */ + __u32 local_port; /* stored in host byte order */ + __u32 is_fullsock; /* Some TCP fields are only valid if + * there is a full socket. If not, the + * fields read as zero. + */ + __u32 snd_cwnd; + __u32 srtt_us; /* Averaged RTT << 3 in usecs */ + __u32 bpf_sock_ops_cb_flags; /* flags defined in uapi/linux/tcp.h */ + __u32 state; + __u32 rtt_min; + __u32 snd_ssthresh; + __u32 rcv_nxt; + __u32 snd_nxt; + __u32 snd_una; + __u32 mss_cache; + __u32 ecn_flags; + __u32 rate_delivered; + __u32 rate_interval_us; + __u32 packets_out; + __u32 retrans_out; + __u32 total_retrans; + __u32 segs_in; + __u32 data_segs_in; + __u32 segs_out; + __u32 data_segs_out; + __u32 lost_out; + __u32 sacked_out; + __u32 sk_txhash; + __u64 bytes_received; + __u64 bytes_acked; + __bpf_md_ptr(struct bpf_sock *, sk); + /* [skb_data, skb_data_end) covers the whole TCP header. + * + * BPF_SOCK_OPS_PARSE_HDR_OPT_CB: The packet received + * BPF_SOCK_OPS_HDR_OPT_LEN_CB: Not useful because the + * header has not been written. + * BPF_SOCK_OPS_WRITE_HDR_OPT_CB: The header and options have + * been written so far. + * BPF_SOCK_OPS_ACTIVE_ESTABLISHED_CB: The SYNACK that concludes + * the 3WHS. + * BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB: The ACK that concludes + * the 3WHS. + * + * bpf_load_hdr_opt() can also be used to read a particular option. + */ + __bpf_md_ptr(void *, skb_data); + __bpf_md_ptr(void *, skb_data_end); + __u32 skb_len; /* The total length of a packet. + * It includes the header, options, + * and payload. + */ + __u32 skb_tcp_flags; /* tcp_flags of the header. It provides + * an easy way to check for tcp_flags + * without parsing skb_data. + * + * In particular, the skb_tcp_flags + * will still be available in + * BPF_SOCK_OPS_HDR_OPT_LEN even though + * the outgoing header has not + * been written yet. + */ +}; + +/* Definitions for bpf_sock_ops_cb_flags */ +enum { + BPF_SOCK_OPS_RTO_CB_FLAG = (1<<0), + BPF_SOCK_OPS_RETRANS_CB_FLAG = (1<<1), + BPF_SOCK_OPS_STATE_CB_FLAG = (1<<2), + BPF_SOCK_OPS_RTT_CB_FLAG = (1<<3), + /* Call bpf for all received TCP headers. The bpf prog will be + * called under sock_ops->op == BPF_SOCK_OPS_PARSE_HDR_OPT_CB + * + * Please refer to the comment in BPF_SOCK_OPS_PARSE_HDR_OPT_CB + * for the header option related helpers that will be useful + * to the bpf programs. + * + * It could be used at the client/active side (i.e. connect() side) + * when the server told it that the server was in syncookie + * mode and required the active side to resend the bpf-written + * options. The active side can keep writing the bpf-options until + * it received a valid packet from the server side to confirm + * the earlier packet (and options) has been received. The later + * example patch is using it like this at the active side when the + * server is in syncookie mode. + * + * The bpf prog will usually turn this off in the common cases. + */ + BPF_SOCK_OPS_PARSE_ALL_HDR_OPT_CB_FLAG = (1<<4), + /* Call bpf when kernel has received a header option that + * the kernel cannot handle. The bpf prog will be called under + * sock_ops->op == BPF_SOCK_OPS_PARSE_HDR_OPT_CB. + * + * Please refer to the comment in BPF_SOCK_OPS_PARSE_HDR_OPT_CB + * for the header option related helpers that will be useful + * to the bpf programs. + */ + BPF_SOCK_OPS_PARSE_UNKNOWN_HDR_OPT_CB_FLAG = (1<<5), + /* Call bpf when the kernel is writing header options for the + * outgoing packet. The bpf prog will first be called + * to reserve space in a skb under + * sock_ops->op == BPF_SOCK_OPS_HDR_OPT_LEN_CB. Then + * the bpf prog will be called to write the header option(s) + * under sock_ops->op == BPF_SOCK_OPS_WRITE_HDR_OPT_CB. + * + * Please refer to the comment in BPF_SOCK_OPS_HDR_OPT_LEN_CB + * and BPF_SOCK_OPS_WRITE_HDR_OPT_CB for the header option + * related helpers that will be useful to the bpf programs. + * + * The kernel gets its chance to reserve space and write + * options first before the BPF program does. + */ + BPF_SOCK_OPS_WRITE_HDR_OPT_CB_FLAG = (1<<6), +/* Mask of all currently supported cb flags */ + BPF_SOCK_OPS_ALL_CB_FLAGS = 0x7F, +}; + +/* List of known BPF sock_ops operators. + * New entries can only be added at the end + */ +enum { + BPF_SOCK_OPS_VOID, + BPF_SOCK_OPS_TIMEOUT_INIT, /* Should return SYN-RTO value to use or + * -1 if default value should be used + */ + BPF_SOCK_OPS_RWND_INIT, /* Should return initial advertized + * window (in packets) or -1 if default + * value should be used + */ + BPF_SOCK_OPS_TCP_CONNECT_CB, /* Calls BPF program right before an + * active connection is initialized + */ + BPF_SOCK_OPS_ACTIVE_ESTABLISHED_CB, /* Calls BPF program when an + * active connection is + * established + */ + BPF_SOCK_OPS_PASSIVE_ESTABLISHED_CB, /* Calls BPF program when a + * passive connection is + * established + */ + BPF_SOCK_OPS_NEEDS_ECN, /* If connection's congestion control + * needs ECN + */ + BPF_SOCK_OPS_BASE_RTT, /* Get base RTT. The correct value is + * based on the path and may be + * dependent on the congestion control + * algorithm. In general it indicates + * a congestion threshold. RTTs above + * this indicate congestion + */ + BPF_SOCK_OPS_RTO_CB, /* Called when an RTO has triggered. + * Arg1: value of icsk_retransmits + * Arg2: value of icsk_rto + * Arg3: whether RTO has expired + */ + BPF_SOCK_OPS_RETRANS_CB, /* Called when skb is retransmitted. + * Arg1: sequence number of 1st byte + * Arg2: # segments + * Arg3: return value of + * tcp_transmit_skb (0 => success) + */ + BPF_SOCK_OPS_STATE_CB, /* Called when TCP changes state. + * Arg1: old_state + * Arg2: new_state + */ + BPF_SOCK_OPS_TCP_LISTEN_CB, /* Called on listen(2), right after + * socket transition to LISTEN state. + */ + BPF_SOCK_OPS_RTT_CB, /* Called on every RTT. + */ + BPF_SOCK_OPS_PARSE_HDR_OPT_CB, /* Parse the header option. + * It will be called to handle + * the packets received at + * an already established + * connection. + * + * sock_ops->skb_data: + * Referring to the received skb. + * It covers the TCP header only. + * + * bpf_load_hdr_opt() can also + * be used to search for a + * particular option. + */ + BPF_SOCK_OPS_HDR_OPT_LEN_CB, /* Reserve space for writing the + * header option later in + * BPF_SOCK_OPS_WRITE_HDR_OPT_CB. + * Arg1: bool want_cookie. (in + * writing SYNACK only) + * + * sock_ops->skb_data: + * Not available because no header has + * been written yet. + * + * sock_ops->skb_tcp_flags: + * The tcp_flags of the + * outgoing skb. (e.g. SYN, ACK, FIN). + * + * bpf_reserve_hdr_opt() should + * be used to reserve space. + */ + BPF_SOCK_OPS_WRITE_HDR_OPT_CB, /* Write the header options + * Arg1: bool want_cookie. (in + * writing SYNACK only) + * + * sock_ops->skb_data: + * Referring to the outgoing skb. + * It covers the TCP header + * that has already been written + * by the kernel and the + * earlier bpf-progs. + * + * sock_ops->skb_tcp_flags: + * The tcp_flags of the outgoing + * skb. (e.g. SYN, ACK, FIN). + * + * bpf_store_hdr_opt() should + * be used to write the + * option. + * + * bpf_load_hdr_opt() can also + * be used to search for a + * particular option that + * has already been written + * by the kernel or the + * earlier bpf-progs. + */ +}; + +/* List of TCP states. There is a build check in net/ipv4/tcp.c to detect + * changes between the TCP and BPF versions. Ideally this should never happen. + * If it does, we need to add code to convert them before calling + * the BPF sock_ops function. + */ +enum { + BPF_TCP_ESTABLISHED = 1, + BPF_TCP_SYN_SENT, + BPF_TCP_SYN_RECV, + BPF_TCP_FIN_WAIT1, + BPF_TCP_FIN_WAIT2, + BPF_TCP_TIME_WAIT, + BPF_TCP_CLOSE, + BPF_TCP_CLOSE_WAIT, + BPF_TCP_LAST_ACK, + BPF_TCP_LISTEN, + BPF_TCP_CLOSING, /* Now a valid state */ + BPF_TCP_NEW_SYN_RECV, + + BPF_TCP_MAX_STATES /* Leave at the end! */ +}; + +enum { + TCP_BPF_IW = 1001, /* Set TCP initial congestion window */ + TCP_BPF_SNDCWND_CLAMP = 1002, /* Set sndcwnd_clamp */ + TCP_BPF_DELACK_MAX = 1003, /* Max delay ack in usecs */ + TCP_BPF_RTO_MIN = 1004, /* Min delay ack in usecs */ + /* Copy the SYN pkt to optval + * + * BPF_PROG_TYPE_SOCK_OPS only. It is similar to the + * bpf_getsockopt(TCP_SAVED_SYN) but it does not limit + * to only getting from the saved_syn. It can either get the + * syn packet from: + * + * 1. the just-received SYN packet (only available when writing the + * SYNACK). It will be useful when it is not necessary to + * save the SYN packet for latter use. It is also the only way + * to get the SYN during syncookie mode because the syn + * packet cannot be saved during syncookie. + * + * OR + * + * 2. the earlier saved syn which was done by + * bpf_setsockopt(TCP_SAVE_SYN). + * + * The bpf_getsockopt(TCP_BPF_SYN*) option will hide where the + * SYN packet is obtained. + * + * If the bpf-prog does not need the IP[46] header, the + * bpf-prog can avoid parsing the IP header by using + * TCP_BPF_SYN. Otherwise, the bpf-prog can get both + * IP[46] and TCP header by using TCP_BPF_SYN_IP. + * + * >0: Total number of bytes copied + * -ENOSPC: Not enough space in optval. Only optlen number of + * bytes is copied. + * -ENOENT: The SYN skb is not available now and the earlier SYN pkt + * is not saved by setsockopt(TCP_SAVE_SYN). + */ + TCP_BPF_SYN = 1005, /* Copy the TCP header */ + TCP_BPF_SYN_IP = 1006, /* Copy the IP[46] and TCP header */ + TCP_BPF_SYN_MAC = 1007, /* Copy the MAC, IP[46], and TCP header */ +}; + +enum { + BPF_LOAD_HDR_OPT_TCP_SYN = (1ULL << 0), +}; + +/* args[0] value during BPF_SOCK_OPS_HDR_OPT_LEN_CB and + * BPF_SOCK_OPS_WRITE_HDR_OPT_CB. + */ +enum { + BPF_WRITE_HDR_TCP_CURRENT_MSS = 1, /* Kernel is finding the + * total option spaces + * required for an established + * sk in order to calculate the + * MSS. No skb is actually + * sent. + */ + BPF_WRITE_HDR_TCP_SYNACK_COOKIE = 2, /* Kernel is in syncookie mode + * when sending a SYN. + */ +}; + +struct bpf_perf_event_value { + __u64 counter; + __u64 enabled; + __u64 running; +}; + +enum { + BPF_DEVCG_ACC_MKNOD = (1ULL << 0), + BPF_DEVCG_ACC_READ = (1ULL << 1), + BPF_DEVCG_ACC_WRITE = (1ULL << 2), +}; + +enum { + BPF_DEVCG_DEV_BLOCK = (1ULL << 0), + BPF_DEVCG_DEV_CHAR = (1ULL << 1), +}; + +struct bpf_cgroup_dev_ctx { + /* access_type encoded as (BPF_DEVCG_ACC_* << 16) | BPF_DEVCG_DEV_* */ + __u32 access_type; + __u32 major; + __u32 minor; +}; + +struct bpf_raw_tracepoint_args { + __u64 args[0]; +}; + +/* DIRECT: Skip the FIB rules and go to FIB table associated with device + * OUTPUT: Do lookup from egress perspective; default is ingress + */ +enum { + BPF_FIB_LOOKUP_DIRECT = (1U << 0), + BPF_FIB_LOOKUP_OUTPUT = (1U << 1), +}; + +enum { + BPF_FIB_LKUP_RET_SUCCESS, /* lookup successful */ + BPF_FIB_LKUP_RET_BLACKHOLE, /* dest is blackholed; can be dropped */ + BPF_FIB_LKUP_RET_UNREACHABLE, /* dest is unreachable; can be dropped */ + BPF_FIB_LKUP_RET_PROHIBIT, /* dest not allowed; can be dropped */ + BPF_FIB_LKUP_RET_NOT_FWDED, /* packet is not forwarded */ + BPF_FIB_LKUP_RET_FWD_DISABLED, /* fwding is not enabled on ingress */ + BPF_FIB_LKUP_RET_UNSUPP_LWT, /* fwd requires encapsulation */ + BPF_FIB_LKUP_RET_NO_NEIGH, /* no neighbor entry for nh */ + BPF_FIB_LKUP_RET_FRAG_NEEDED, /* fragmentation required to fwd */ +}; + +struct bpf_fib_lookup { + /* input: network family for lookup (AF_INET, AF_INET6) + * output: network family of egress nexthop + */ + __u8 family; + + /* set if lookup is to consider L4 data - e.g., FIB rules */ + __u8 l4_protocol; + __be16 sport; + __be16 dport; + + /* total length of packet from network header - used for MTU check */ + __u16 tot_len; + + /* input: L3 device index for lookup + * output: device index from FIB lookup + */ + __u32 ifindex; + + union { + /* inputs to lookup */ + __u8 tos; /* AF_INET */ + __be32 flowinfo; /* AF_INET6, flow_label + priority */ + + /* output: metric of fib result (IPv4/IPv6 only) */ + __u32 rt_metric; + }; + + union { + __be32 ipv4_src; + __u32 ipv6_src[4]; /* in6_addr; network order */ + }; + + /* input to bpf_fib_lookup, ipv{4,6}_dst is destination address in + * network header. output: bpf_fib_lookup sets to gateway address + * if FIB lookup returns gateway route + */ + union { + __be32 ipv4_dst; + __u32 ipv6_dst[4]; /* in6_addr; network order */ + }; + + /* output */ + __be16 h_vlan_proto; + __be16 h_vlan_TCI; + __u8 smac[6]; /* ETH_ALEN */ + __u8 dmac[6]; /* ETH_ALEN */ +}; + +struct bpf_redir_neigh { + /* network family for lookup (AF_INET, AF_INET6) */ + __u32 nh_family; + /* network address of nexthop; skips fib lookup to find gateway */ + union { + __be32 ipv4_nh; + __u32 ipv6_nh[4]; /* in6_addr; network order */ + }; +}; + +enum bpf_task_fd_type { + BPF_FD_TYPE_RAW_TRACEPOINT, /* tp name */ + BPF_FD_TYPE_TRACEPOINT, /* tp name */ + BPF_FD_TYPE_KPROBE, /* (symbol + offset) or addr */ + BPF_FD_TYPE_KRETPROBE, /* (symbol + offset) or addr */ + BPF_FD_TYPE_UPROBE, /* filename + offset */ + BPF_FD_TYPE_URETPROBE, /* filename + offset */ +}; + +enum { + BPF_FLOW_DISSECTOR_F_PARSE_1ST_FRAG = (1U << 0), + BPF_FLOW_DISSECTOR_F_STOP_AT_FLOW_LABEL = (1U << 1), + BPF_FLOW_DISSECTOR_F_STOP_AT_ENCAP = (1U << 2), +}; + +struct bpf_flow_keys { + __u16 nhoff; + __u16 thoff; + __u16 addr_proto; /* ETH_P_* of valid addrs */ + __u8 is_frag; + __u8 is_first_frag; + __u8 is_encap; + __u8 ip_proto; + __be16 n_proto; + __be16 sport; + __be16 dport; + union { + struct { + __be32 ipv4_src; + __be32 ipv4_dst; + }; + struct { + __u32 ipv6_src[4]; /* in6_addr; network order */ + __u32 ipv6_dst[4]; /* in6_addr; network order */ + }; + }; + __u32 flags; + __be32 flow_label; +}; + +struct bpf_func_info { + __u32 insn_off; + __u32 type_id; +}; + +#define BPF_LINE_INFO_LINE_NUM(line_col) ((line_col) >> 10) +#define BPF_LINE_INFO_LINE_COL(line_col) ((line_col) & 0x3ff) + +struct bpf_line_info { + __u32 insn_off; + __u32 file_name_off; + __u32 line_off; + __u32 line_col; +}; + +struct bpf_spin_lock { + __u32 val; +}; + +struct bpf_sysctl { + __u32 write; /* Sysctl is being read (= 0) or written (= 1). + * Allows 1,2,4-byte read, but no write. + */ + __u32 file_pos; /* Sysctl file position to read from, write to. + * Allows 1,2,4-byte read an 4-byte write. + */ +}; + +struct bpf_sockopt { + __bpf_md_ptr(struct bpf_sock *, sk); + __bpf_md_ptr(void *, optval); + __bpf_md_ptr(void *, optval_end); + + __s32 level; + __s32 optname; + __s32 optlen; + __s32 retval; +}; + +struct bpf_pidns_info { + __u32 pid; + __u32 tgid; +}; + +/* User accessible data for SK_LOOKUP programs. Add new fields at the end. */ +struct bpf_sk_lookup { + __bpf_md_ptr(struct bpf_sock *, sk); /* Selected socket */ + + __u32 family; /* Protocol family (AF_INET, AF_INET6) */ + __u32 protocol; /* IP protocol (IPPROTO_TCP, IPPROTO_UDP) */ + __u32 remote_ip4; /* Network byte order */ + __u32 remote_ip6[4]; /* Network byte order */ + __u32 remote_port; /* Network byte order */ + __u32 local_ip4; /* Network byte order */ + __u32 local_ip6[4]; /* Network byte order */ + __u32 local_port; /* Host byte order */ +}; + +/* + * struct btf_ptr is used for typed pointer representation; the + * type id is used to render the pointer data as the appropriate type + * via the bpf_snprintf_btf() helper described above. A flags field - + * potentially to specify additional details about the BTF pointer + * (rather than its mode of display) - is included for future use. + * Display flags - BTF_F_* - are passed to bpf_snprintf_btf separately. + */ +struct btf_ptr { + void *ptr; + __u32 type_id; + __u32 flags; /* BTF ptr flags; unused at present. */ +}; + +/* + * Flags to control bpf_snprintf_btf() behaviour. + * - BTF_F_COMPACT: no formatting around type information + * - BTF_F_NONAME: no struct/union member names/types + * - BTF_F_PTR_RAW: show raw (unobfuscated) pointer values; + * equivalent to %px. + * - BTF_F_ZERO: show zero-valued struct/union members; they + * are not displayed by default + */ +enum { + BTF_F_COMPACT = (1ULL << 0), + BTF_F_NONAME = (1ULL << 1), + BTF_F_PTR_RAW = (1ULL << 2), + BTF_F_ZERO = (1ULL << 3), +}; + +#endif /* _UAPI__LINUX_BPF_H__ */ diff --git a/resources/usr/include/bpf/linux/bpf_common.h b/resources/usr/include/bpf/linux/bpf_common.h new file mode 100644 index 0000000..ee97668 --- /dev/null +++ b/resources/usr/include/bpf/linux/bpf_common.h @@ -0,0 +1,57 @@ +/* SPDX-License-Identifier: GPL-2.0 WITH Linux-syscall-note */ +#ifndef _UAPI__LINUX_BPF_COMMON_H__ +#define _UAPI__LINUX_BPF_COMMON_H__ + +/* Instruction classes */ +#define BPF_CLASS(code) ((code) & 0x07) +#define BPF_LD 0x00 +#define BPF_LDX 0x01 +#define BPF_ST 0x02 +#define BPF_STX 0x03 +#define BPF_ALU 0x04 +#define BPF_JMP 0x05 +#define BPF_RET 0x06 +#define BPF_MISC 0x07 + +/* ld/ldx fields */ +#define BPF_SIZE(code) ((code) & 0x18) +#define BPF_W 0x00 /* 32-bit */ +#define BPF_H 0x08 /* 16-bit */ +#define BPF_B 0x10 /* 8-bit */ +/* eBPF BPF_DW 0x18 64-bit */ +#define BPF_MODE(code) ((code) & 0xe0) +#define BPF_IMM 0x00 +#define BPF_ABS 0x20 +#define BPF_IND 0x40 +#define BPF_MEM 0x60 +#define BPF_LEN 0x80 +#define BPF_MSH 0xa0 + +/* alu/jmp fields */ +#define BPF_OP(code) ((code) & 0xf0) +#define BPF_ADD 0x00 +#define BPF_SUB 0x10 +#define BPF_MUL 0x20 +#define BPF_DIV 0x30 +#define BPF_OR 0x40 +#define BPF_AND 0x50 +#define BPF_LSH 0x60 +#define BPF_RSH 0x70 +#define BPF_NEG 0x80 +#define BPF_MOD 0x90 +#define BPF_XOR 0xa0 + +#define BPF_JA 0x00 +#define BPF_JEQ 0x10 +#define BPF_JGT 0x20 +#define BPF_JGE 0x30 +#define BPF_JSET 0x40 +#define BPF_SRC(code) ((code) & 0x08) +#define BPF_K 0x00 +#define BPF_X 0x08 + +#ifndef BPF_MAXINSNS +#define BPF_MAXINSNS 4096 +#endif + +#endif /* _UAPI__LINUX_BPF_COMMON_H__ */ diff --git a/resources/usr/lib/libbpf.so.32 b/resources/usr/lib/libbpf.so.32 new file mode 100755 index 0000000..6103a4f Binary files /dev/null and b/resources/usr/lib/libbpf.so.32 differ diff --git a/resources/usr/lib/libbpf.so.64 b/resources/usr/lib/libbpf.so.64 new file mode 100755 index 0000000..8e70150 Binary files /dev/null and b/resources/usr/lib/libbpf.so.64 differ diff --git a/resources/var/lib/connman/bpf_code b/resources/var/lib/connman/bpf_code new file mode 100644 index 0000000..328cbf5 Binary files /dev/null and b/resources/var/lib/connman/bpf_code differ