From: Sean Young Date: Sat, 15 Jan 2022 10:19:11 +0000 (+0100) Subject: media: lirc: report ir receiver overflow X-Git-Tag: v6.1-rc5~1763^2~161 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=68a99f6a0ebfe9101ea79ba5af1c407a5ad4f629;p=platform%2Fkernel%2Flinux-starfive.git media: lirc: report ir receiver overflow If the driver reports that the hardware had an overflow, report this to userspace. It would be nice to know when this happens, and not just get a long space. This change has been tested with lircd, ir-ctl, and ir-keytable. Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab --- diff --git a/Documentation/userspace-api/media/lirc.h.rst.exceptions b/Documentation/userspace-api/media/lirc.h.rst.exceptions index ec86e82..5f31e96 100644 --- a/Documentation/userspace-api/media/lirc.h.rst.exceptions +++ b/Documentation/userspace-api/media/lirc.h.rst.exceptions @@ -11,12 +11,14 @@ ignore define LIRC_SPACE ignore define LIRC_PULSE ignore define LIRC_FREQUENCY ignore define LIRC_TIMEOUT +ignore define LIRC_OVERFLOW ignore define LIRC_VALUE ignore define LIRC_MODE2 ignore define LIRC_IS_SPACE ignore define LIRC_IS_PULSE ignore define LIRC_IS_FREQUENCY ignore define LIRC_IS_TIMEOUT +ignore define LIRC_IS_OVERFLOW ignore define LIRC_MODE2SEND ignore define LIRC_SEND2MODE @@ -75,6 +77,7 @@ ignore define PULSE_MASK ignore define LIRC_MODE2_SPACE ignore define LIRC_MODE2_PULSE ignore define LIRC_MODE2_TIMEOUT +ignore define LIRC_MODE2_OVERFLOW ignore define LIRC_VALUE_MASK ignore define LIRC_MODE2_MASK diff --git a/Documentation/userspace-api/media/rc/lirc-dev-intro.rst b/Documentation/userspace-api/media/rc/lirc-dev-intro.rst index 9a5e5f0..d899331 100644 --- a/Documentation/userspace-api/media/rc/lirc-dev-intro.rst +++ b/Documentation/userspace-api/media/rc/lirc-dev-intro.rst @@ -103,11 +103,11 @@ on the following table. ``LIRC_MODE2_PULSE`` - Signifies the presence of IR in microseconds. + Signifies the presence of IR in microseconds, also known as *flash*. ``LIRC_MODE2_SPACE`` - Signifies absence of IR in microseconds. + Signifies absence of IR in microseconds, also known as *gap*. ``LIRC_MODE2_FREQUENCY`` @@ -121,6 +121,13 @@ on the following table. to no IR being detected, this packet will be sent, with the number of microseconds with no IR. + ``LIRC_MODE2_OVERFLOW`` + + Signifies that the IR receiver encounter an overflow, and some IR + is missing. The IR data after this should be correct again. The + actual value is not important, but this is set to 0xffffff by the + kernel for compatibility with lircd. + .. _lirc-mode-pulse: ``LIRC_MODE_PULSE`` diff --git a/drivers/media/rc/lirc_dev.c b/drivers/media/rc/lirc_dev.c index fa4671f..765375b 100644 --- a/drivers/media/rc/lirc_dev.c +++ b/drivers/media/rc/lirc_dev.c @@ -44,14 +44,13 @@ void lirc_raw_event(struct rc_dev *dev, struct ir_raw_event ev) /* Receiver overflow, data missing */ if (ev.overflow) { /* - * Userspace expects a long space event before the start of - * the signal to use as a sync. This may be done with repeat - * packets and normal samples. But if an overflow has been sent - * then we assume that a long time has passed, so we send a - * space with the maximum time value. + * Send lirc overflow message. This message is unknown to + * lircd, but it will interpret this as a long space as + * long as the value is set to high value. This resets its + * decoder state. */ - sample = LIRC_SPACE(LIRC_VALUE_MASK); - dev_dbg(&dev->dev, "delivering overflow space to lirc_dev\n"); + sample = LIRC_OVERFLOW(LIRC_VALUE_MASK); + dev_dbg(&dev->dev, "delivering overflow to lirc_dev\n"); /* Carrier reports */ } else if (ev.carrier_report) { diff --git a/drivers/media/rc/rc-loopback.c b/drivers/media/rc/rc-loopback.c index 6441879..b356041c 100644 --- a/drivers/media/rc/rc-loopback.c +++ b/drivers/media/rc/rc-loopback.c @@ -112,7 +112,11 @@ static int loop_tx_ir(struct rc_dev *dev, unsigned *txbuf, unsigned count) rawir.pulse = i % 2 ? false : true; rawir.duration = txbuf[i]; - ir_raw_event_store_with_filter(dev, &rawir); + /* simulate overflow if ridiculously long pulse was sent */ + if (rawir.pulse && rawir.duration > MS_TO_US(50)) + ir_raw_event_overflow(dev); + else + ir_raw_event_store_with_filter(dev, &rawir); } if (lodev->carrierreport) { diff --git a/include/uapi/linux/lirc.h b/include/uapi/linux/lirc.h index a1f9c26..21c69a6 100644 --- a/include/uapi/linux/lirc.h +++ b/include/uapi/linux/lirc.h @@ -16,14 +16,16 @@ #define LIRC_MODE2_PULSE 0x01000000 #define LIRC_MODE2_FREQUENCY 0x02000000 #define LIRC_MODE2_TIMEOUT 0x03000000 +#define LIRC_MODE2_OVERFLOW 0x04000000 #define LIRC_VALUE_MASK 0x00FFFFFF #define LIRC_MODE2_MASK 0xFF000000 -#define LIRC_SPACE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_SPACE) -#define LIRC_PULSE(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_PULSE) -#define LIRC_FREQUENCY(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_FREQUENCY) -#define LIRC_TIMEOUT(val) (((val)&LIRC_VALUE_MASK) | LIRC_MODE2_TIMEOUT) +#define LIRC_SPACE(val) (((val) & LIRC_VALUE_MASK) | LIRC_MODE2_SPACE) +#define LIRC_PULSE(val) (((val) & LIRC_VALUE_MASK) | LIRC_MODE2_PULSE) +#define LIRC_FREQUENCY(val) (((val) & LIRC_VALUE_MASK) | LIRC_MODE2_FREQUENCY) +#define LIRC_TIMEOUT(val) (((val) & LIRC_VALUE_MASK) | LIRC_MODE2_TIMEOUT) +#define LIRC_OVERFLOW(val) (((val) & LIRC_VALUE_MASK) | LIRC_MODE2_OVERFLOW) #define LIRC_VALUE(val) ((val)&LIRC_VALUE_MASK) #define LIRC_MODE2(val) ((val)&LIRC_MODE2_MASK) @@ -32,6 +34,7 @@ #define LIRC_IS_PULSE(val) (LIRC_MODE2(val) == LIRC_MODE2_PULSE) #define LIRC_IS_FREQUENCY(val) (LIRC_MODE2(val) == LIRC_MODE2_FREQUENCY) #define LIRC_IS_TIMEOUT(val) (LIRC_MODE2(val) == LIRC_MODE2_TIMEOUT) +#define LIRC_IS_OVERFLOW(val) (LIRC_MODE2(val) == LIRC_MODE2_OVERFLOW) /* used heavily by lirc userspace */ #define lirc_t int