From: Andy Shevchenko Date: Wed, 4 Aug 2021 14:28:37 +0000 (+0300) Subject: Bluetooth: hci_bcm: Fix kernel doc comments X-Git-Tag: accepted/tizen/unified/20230118.172025~6527^2~161^2~33 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=67cbdd74c4cba378a715003923fc418a10349fae;p=platform%2Fkernel%2Flinux-rpi.git Bluetooth: hci_bcm: Fix kernel doc comments Kernel doc validator complains about few missed parameter descriptions. Fill the gap by describing them. Signed-off-by: Andy Shevchenko Signed-off-by: Marcel Holtmann --- diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c index 3cd57fc..ef54afa 100644 --- a/drivers/bluetooth/hci_bcm.c +++ b/drivers/bluetooth/hci_bcm.c @@ -51,6 +51,7 @@ /** * struct bcm_device_data - device specific data * @no_early_set_baudrate: Disallow set baudrate before driver setup() + * @drive_rts_on_open: drive RTS signal on ->open() when platform requires it */ struct bcm_device_data { bool no_early_set_baudrate; @@ -77,6 +78,8 @@ struct bcm_device_data { * @btlp: Apple ACPI method to toggle BT_WAKE pin ("Bluetooth Low Power") * @btpu: Apple ACPI method to drive BT_REG_ON pin high ("Bluetooth Power Up") * @btpd: Apple ACPI method to drive BT_REG_ON pin low ("Bluetooth Power Down") + * @gpio_count: internal counter for GPIO resources associated with ACPI device + * @gpio_int_idx: index in _CRS for GpioInt() resource * @txco_clk: external reference frequency clock used by Bluetooth device * @lpo_clk: external LPO clock used by Bluetooth device * @supplies: VBAT and VDDIO supplies used by Bluetooth device @@ -88,10 +91,13 @@ struct bcm_device_data { * set to 0 if @init_speed is already the preferred baudrate * @irq: interrupt triggered by HOST_WAKE_BT pin * @irq_active_low: whether @irq is active low + * @irq_acquired: flag to show if IRQ handler has been assigned * @hu: pointer to HCI UART controller struct, * used to disable flow control during runtime suspend and system sleep * @is_suspended: whether flow control is currently disabled * @no_early_set_baudrate: don't set_baudrate before setup() + * @drive_rts_on_open: drive RTS signal on ->open() when platform requires it + * @pcm_int_params: keep the initial PCM configuration */ struct bcm_device { /* Must be the first member, hci_serdev.c expects this. */