From: Charles Keepax Date: Mon, 6 Mar 2017 16:54:33 +0000 (+0000) Subject: ASoC: wm_adsp: Return an error on write to a disabled volatile control X-Git-Tag: v5.15~11288^2~10^2~1^2~1 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=67430a39ca7a6af28aade5acb92d43ee257c1014;p=platform%2Fkernel%2Flinux-starfive.git ASoC: wm_adsp: Return an error on write to a disabled volatile control Volatile controls should only be accessed when the firmware is active, currently however writes to these controls will succeed, but the data will be lost, if the firmware is powered down. Update this behaviour such that an error is returned the same as it is for reads. Signed-off-by: Charles Keepax Signed-off-by: Mark Brown --- diff --git a/sound/soc/codecs/wm_adsp.c b/sound/soc/codecs/wm_adsp.c index d151224..6313b3d 100644 --- a/sound/soc/codecs/wm_adsp.c +++ b/sound/soc/codecs/wm_adsp.c @@ -899,7 +899,10 @@ static int wm_coeff_put(struct snd_kcontrol *kctl, mutex_lock(&ctl->dsp->pwr_lock); - memcpy(ctl->cache, p, ctl->len); + if (ctl->flags & WMFW_CTL_FLAG_VOLATILE) + ret = -EPERM; + else + memcpy(ctl->cache, p, ctl->len); ctl->set = 1; if (ctl->enabled && ctl->dsp->running) @@ -926,6 +929,8 @@ static int wm_coeff_tlv_put(struct snd_kcontrol *kctl, ctl->set = 1; if (ctl->enabled && ctl->dsp->running) ret = wm_coeff_write_control(ctl, ctl->cache, size); + else if (ctl->flags & WMFW_CTL_FLAG_VOLATILE) + ret = -EPERM; } mutex_unlock(&ctl->dsp->pwr_lock);