From: Yaniv Rosner Date: Wed, 27 Mar 2013 01:05:18 +0000 (+0000) Subject: bnx2x: Support reading I2C EEPROM SFF8472 X-Git-Tag: v3.10-rc1~66^2~309 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=669d69967e8600b13513316e8e2c347d9e04c499;p=profile%2Fcommon%2Fkernel-common.git bnx2x: Support reading I2C EEPROM SFF8472 Add full support for "ethtool -m" command. Signed-off-by: Yaniv Rosner Signed-off-by: Yuval Mintz Signed-off-by: Ariel Elior Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c index 324d691..129d6b2 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_ethtool.c @@ -1393,10 +1393,9 @@ static int bnx2x_get_module_eeprom(struct net_device *dev, u8 *data) { struct bnx2x *bp = netdev_priv(dev); - int rc = 0, phy_idx; + int rc = -EINVAL, phy_idx; u8 *user_data = data; - int remaining_len = ee->len, xfer_size; - unsigned int page_off = ee->offset; + unsigned int start_addr = ee->offset, xfer_size = 0; if (!netif_running(dev)) { DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM, @@ -1405,21 +1404,52 @@ static int bnx2x_get_module_eeprom(struct net_device *dev, } phy_idx = bnx2x_get_cur_phy_idx(bp); - bnx2x_acquire_phy_lock(bp); - while (!rc && remaining_len > 0) { - xfer_size = (remaining_len > SFP_EEPROM_PAGE_SIZE) ? - SFP_EEPROM_PAGE_SIZE : remaining_len; + + /* Read A0 section */ + if (start_addr < ETH_MODULE_SFF_8079_LEN) { + /* Limit transfer size to the A0 section boundary */ + if (start_addr + ee->len > ETH_MODULE_SFF_8079_LEN) + xfer_size = ETH_MODULE_SFF_8079_LEN - start_addr; + else + xfer_size = ee->len; + bnx2x_acquire_phy_lock(bp); rc = bnx2x_read_sfp_module_eeprom(&bp->link_params.phy[phy_idx], &bp->link_params, - page_off, + I2C_DEV_ADDR_A0, + start_addr, xfer_size, user_data); - remaining_len -= xfer_size; + bnx2x_release_phy_lock(bp); + if (rc) { + DP(BNX2X_MSG_ETHTOOL, "Failed reading A0 section\n"); + + return -EINVAL; + } user_data += xfer_size; - page_off += xfer_size; + start_addr += xfer_size; } - bnx2x_release_phy_lock(bp); + /* Read A2 section */ + if ((start_addr >= ETH_MODULE_SFF_8079_LEN) && + (start_addr < ETH_MODULE_SFF_8472_LEN)) { + xfer_size = ee->len - xfer_size; + /* Limit transfer size to the A2 section boundary */ + if (start_addr + xfer_size > ETH_MODULE_SFF_8472_LEN) + xfer_size = ETH_MODULE_SFF_8472_LEN - start_addr; + start_addr -= ETH_MODULE_SFF_8079_LEN; + bnx2x_acquire_phy_lock(bp); + rc = bnx2x_read_sfp_module_eeprom(&bp->link_params.phy[phy_idx], + &bp->link_params, + I2C_DEV_ADDR_A2, + start_addr, + xfer_size, + user_data); + bnx2x_release_phy_lock(bp); + if (rc) { + DP(BNX2X_MSG_ETHTOOL, "Failed reading A2 section\n"); + return -EINVAL; + } + } return rc; } @@ -1427,24 +1457,50 @@ static int bnx2x_get_module_info(struct net_device *dev, struct ethtool_modinfo *modinfo) { struct bnx2x *bp = netdev_priv(dev); - int phy_idx; + int phy_idx, rc; + u8 sff8472_comp, diag_type; + if (!netif_running(dev)) { - DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM, + DP(BNX2X_MSG_ETHTOOL | BNX2X_MSG_NVM, "cannot access eeprom when the interface is down\n"); return -EAGAIN; } - phy_idx = bnx2x_get_cur_phy_idx(bp); - switch (bp->link_params.phy[phy_idx].media_type) { - case ETH_PHY_SFPP_10G_FIBER: - case ETH_PHY_SFP_1G_FIBER: - case ETH_PHY_DA_TWINAX: + bnx2x_acquire_phy_lock(bp); + rc = bnx2x_read_sfp_module_eeprom(&bp->link_params.phy[phy_idx], + &bp->link_params, + I2C_DEV_ADDR_A0, + SFP_EEPROM_SFF_8472_COMP_ADDR, + SFP_EEPROM_SFF_8472_COMP_SIZE, + &sff8472_comp); + bnx2x_release_phy_lock(bp); + if (rc) { + DP(BNX2X_MSG_ETHTOOL, "Failed reading SFF-8472 comp field\n"); + return -EINVAL; + } + + bnx2x_acquire_phy_lock(bp); + rc = bnx2x_read_sfp_module_eeprom(&bp->link_params.phy[phy_idx], + &bp->link_params, + I2C_DEV_ADDR_A0, + SFP_EEPROM_DIAG_TYPE_ADDR, + SFP_EEPROM_DIAG_TYPE_SIZE, + &diag_type); + bnx2x_release_phy_lock(bp); + if (rc) { + DP(BNX2X_MSG_ETHTOOL, "Failed reading Diag Type field\n"); + return -EINVAL; + } + + if (!sff8472_comp || + (diag_type & SFP_EEPROM_DIAG_ADDR_CHANGE_REQ)) { modinfo->type = ETH_MODULE_SFF_8079; modinfo->eeprom_len = ETH_MODULE_SFF_8079_LEN; - return 0; - default: - return -EOPNOTSUPP; + } else { + modinfo->type = ETH_MODULE_SFF_8472; + modinfo->eeprom_len = ETH_MODULE_SFF_8472_LEN; } + return 0; } static int bnx2x_nvram_write_dword(struct bnx2x *bp, u32 offset, u32 val, diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c index e3fa808..b1b034d 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c @@ -27,6 +27,10 @@ #include "bnx2x.h" #include "bnx2x_cmn.h" +typedef int (*read_sfp_module_eeprom_func_p)(struct bnx2x_phy *phy, + struct link_params *params, + u8 dev_addr, u16 addr, u8 byte_cnt, + u8 *o_buf, u8); /********************************************************/ #define ETH_HLEN 14 /* L2 header size + 2*VLANs (8 bytes) + LLC SNAP (8 bytes) */ @@ -3128,11 +3132,6 @@ static int bnx2x_bsc_read(struct link_params *params, int rc = 0; struct bnx2x *bp = params->bp; - if ((sl_devid != 0xa0) && (sl_devid != 0xa2)) { - DP(NETIF_MSG_LINK, "invalid sl_devid 0x%x\n", sl_devid); - return -EINVAL; - } - if (xfer_cnt > 16) { DP(NETIF_MSG_LINK, "invalid xfer_cnt %d. Max is 16 bytes\n", xfer_cnt); @@ -7770,7 +7769,8 @@ static void bnx2x_sfp_set_transmitter(struct link_params *params, static int bnx2x_8726_read_sfp_module_eeprom(struct bnx2x_phy *phy, struct link_params *params, - u16 addr, u8 byte_cnt, u8 *o_buf) + u8 dev_addr, u16 addr, u8 byte_cnt, + u8 *o_buf, u8 is_init) { struct bnx2x *bp = params->bp; u16 val = 0; @@ -7783,7 +7783,7 @@ static int bnx2x_8726_read_sfp_module_eeprom(struct bnx2x_phy *phy, /* Set the read command byte count */ bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_SFP_TWO_WIRE_BYTE_CNT, - (byte_cnt | 0xa000)); + (byte_cnt | (dev_addr << 8))); /* Set the read command address */ bnx2x_cl45_write(bp, phy, @@ -7857,6 +7857,7 @@ static void bnx2x_warpcore_power_module(struct link_params *params, } static int bnx2x_warpcore_read_sfp_module_eeprom(struct bnx2x_phy *phy, struct link_params *params, + u8 dev_addr, u16 addr, u8 byte_cnt, u8 *o_buf, u8 is_init) { @@ -7881,7 +7882,7 @@ static int bnx2x_warpcore_read_sfp_module_eeprom(struct bnx2x_phy *phy, usleep_range(1000, 2000); bnx2x_warpcore_power_module(params, 1); } - rc = bnx2x_bsc_read(params, phy, 0xa0, addr32, 0, byte_cnt, + rc = bnx2x_bsc_read(params, phy, dev_addr, addr32, 0, byte_cnt, data_array); } while ((rc != 0) && (++cnt < I2C_WA_RETRY_CNT)); @@ -7897,7 +7898,8 @@ static int bnx2x_warpcore_read_sfp_module_eeprom(struct bnx2x_phy *phy, static int bnx2x_8727_read_sfp_module_eeprom(struct bnx2x_phy *phy, struct link_params *params, - u16 addr, u8 byte_cnt, u8 *o_buf) + u8 dev_addr, u16 addr, u8 byte_cnt, + u8 *o_buf, u8 is_init) { struct bnx2x *bp = params->bp; u16 val, i; @@ -7908,6 +7910,15 @@ static int bnx2x_8727_read_sfp_module_eeprom(struct bnx2x_phy *phy, return -EINVAL; } + /* Set 2-wire transfer rate of SFP+ module EEPROM + * to 100Khz since some DACs(direct attached cables) do + * not work at 400Khz. + */ + bnx2x_cl45_write(bp, phy, + MDIO_PMA_DEVAD, + MDIO_PMA_REG_8727_TWO_WIRE_SLAVE_ADDR, + ((dev_addr << 8) | 1)); + /* Need to read from 1.8000 to clear it */ bnx2x_cl45_read(bp, phy, MDIO_PMA_DEVAD, @@ -7980,26 +7991,44 @@ static int bnx2x_8727_read_sfp_module_eeprom(struct bnx2x_phy *phy, return -EINVAL; } - int bnx2x_read_sfp_module_eeprom(struct bnx2x_phy *phy, - struct link_params *params, u16 addr, - u8 byte_cnt, u8 *o_buf) + struct link_params *params, u8 dev_addr, + u16 addr, u16 byte_cnt, u8 *o_buf) { - int rc = -EOPNOTSUPP; + int rc = 0; + struct bnx2x *bp = params->bp; + u8 xfer_size; + u8 *user_data = o_buf; + read_sfp_module_eeprom_func_p read_func; + + if ((dev_addr != 0xa0) && (dev_addr != 0xa2)) { + DP(NETIF_MSG_LINK, "invalid dev_addr 0x%x\n", dev_addr); + return -EINVAL; + } + switch (phy->type) { case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8726: - rc = bnx2x_8726_read_sfp_module_eeprom(phy, params, addr, - byte_cnt, o_buf); - break; + read_func = bnx2x_8726_read_sfp_module_eeprom; + break; case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727: case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8722: - rc = bnx2x_8727_read_sfp_module_eeprom(phy, params, addr, - byte_cnt, o_buf); - break; + read_func = bnx2x_8727_read_sfp_module_eeprom; + break; case PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT: - rc = bnx2x_warpcore_read_sfp_module_eeprom(phy, params, addr, - byte_cnt, o_buf, 0); - break; + read_func = bnx2x_warpcore_read_sfp_module_eeprom; + break; + default: + return -EOPNOTSUPP; + } + + while (!rc && (byte_cnt > 0)) { + xfer_size = (byte_cnt > SFP_EEPROM_PAGE_SIZE) ? + SFP_EEPROM_PAGE_SIZE : byte_cnt; + rc = read_func(phy, params, dev_addr, addr, xfer_size, + user_data, 0); + byte_cnt -= xfer_size; + user_data += xfer_size; + addr += xfer_size; } return rc; } @@ -8016,6 +8045,7 @@ static int bnx2x_get_edc_mode(struct bnx2x_phy *phy, /* First check for copper cable */ if (bnx2x_read_sfp_module_eeprom(phy, params, + I2C_DEV_ADDR_A0, SFP_EEPROM_CON_TYPE_ADDR, 2, (u8 *)val) != 0) { @@ -8033,6 +8063,7 @@ static int bnx2x_get_edc_mode(struct bnx2x_phy *phy, */ if (bnx2x_read_sfp_module_eeprom(phy, params, + I2C_DEV_ADDR_A0, SFP_EEPROM_FC_TX_TECH_ADDR, 1, &copper_module_type) != 0) { @@ -8117,6 +8148,7 @@ static int bnx2x_get_edc_mode(struct bnx2x_phy *phy, u8 options[SFP_EEPROM_OPTIONS_SIZE]; if (bnx2x_read_sfp_module_eeprom(phy, params, + I2C_DEV_ADDR_A0, SFP_EEPROM_OPTIONS_ADDR, SFP_EEPROM_OPTIONS_SIZE, options) != 0) { @@ -8183,6 +8215,7 @@ static int bnx2x_verify_sfp_module(struct bnx2x_phy *phy, /* Format the warning message */ if (bnx2x_read_sfp_module_eeprom(phy, params, + I2C_DEV_ADDR_A0, SFP_EEPROM_VENDOR_NAME_ADDR, SFP_EEPROM_VENDOR_NAME_SIZE, (u8 *)vendor_name)) @@ -8191,6 +8224,7 @@ static int bnx2x_verify_sfp_module(struct bnx2x_phy *phy, vendor_name[SFP_EEPROM_VENDOR_NAME_SIZE] = '\0'; if (bnx2x_read_sfp_module_eeprom(phy, params, + I2C_DEV_ADDR_A0, SFP_EEPROM_PART_NO_ADDR, SFP_EEPROM_PART_NO_SIZE, (u8 *)vendor_pn)) @@ -8221,12 +8255,13 @@ static int bnx2x_wait_for_sfp_module_initialized(struct bnx2x_phy *phy, for (timeout = 0; timeout < 60; timeout++) { if (phy->type == PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT) - rc = bnx2x_warpcore_read_sfp_module_eeprom(phy, - params, 1, - 1, &val, 1); + rc = bnx2x_warpcore_read_sfp_module_eeprom( + phy, params, I2C_DEV_ADDR_A0, 1, 1, &val, + 1); else - rc = bnx2x_read_sfp_module_eeprom(phy, params, 1, 1, - &val); + rc = bnx2x_read_sfp_module_eeprom(phy, params, + I2C_DEV_ADDR_A0, + 1, 1, &val); if (rc == 0) { DP(NETIF_MSG_LINK, "SFP+ module initialization took %d ms\n", @@ -8235,7 +8270,8 @@ static int bnx2x_wait_for_sfp_module_initialized(struct bnx2x_phy *phy, } usleep_range(5000, 10000); } - rc = bnx2x_read_sfp_module_eeprom(phy, params, 1, 1, &val); + rc = bnx2x_read_sfp_module_eeprom(phy, params, I2C_DEV_ADDR_A0, + 1, 1, &val); return rc; } @@ -8392,15 +8428,6 @@ static void bnx2x_8727_specific_func(struct bnx2x_phy *phy, bnx2x_cl45_write(bp, phy, MDIO_PMA_DEVAD, MDIO_PMA_REG_8727_PCS_OPT_CTRL, val); - - /* Set 2-wire transfer rate of SFP+ module EEPROM - * to 100Khz since some DACs(direct attached cables) do - * not work at 400Khz. - */ - bnx2x_cl45_write(bp, phy, - MDIO_PMA_DEVAD, - MDIO_PMA_REG_8727_TWO_WIRE_SLAVE_ADDR, - 0xa001); break; default: DP(NETIF_MSG_LINK, "Function 0x%x not supported by 8727\n", diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h index 56c2aae..4df4523 100644 --- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h +++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.h @@ -41,6 +41,9 @@ #define SPEED_AUTO_NEG 0 #define SPEED_20000 20000 +#define I2C_DEV_ADDR_A0 0xa0 +#define I2C_DEV_ADDR_A2 0xa2 + #define SFP_EEPROM_PAGE_SIZE 16 #define SFP_EEPROM_VENDOR_NAME_ADDR 0x14 #define SFP_EEPROM_VENDOR_NAME_SIZE 16 @@ -54,6 +57,15 @@ #define SFP_EEPROM_SERIAL_SIZE 16 #define SFP_EEPROM_DATE_ADDR 0x54 /* ASCII YYMMDD */ #define SFP_EEPROM_DATE_SIZE 6 +#define SFP_EEPROM_DIAG_TYPE_ADDR 0x5c +#define SFP_EEPROM_DIAG_TYPE_SIZE 1 +#define SFP_EEPROM_DIAG_ADDR_CHANGE_REQ (1<<2) +#define SFP_EEPROM_SFF_8472_COMP_ADDR 0x5e +#define SFP_EEPROM_SFF_8472_COMP_SIZE 1 + +#define SFP_EEPROM_A2_CHECKSUM_RANGE 0x5e +#define SFP_EEPROM_A2_CC_DMI_ADDR 0x5f + #define PWR_FLT_ERR_MSG_LEN 250 #define XGXS_EXT_PHY_TYPE(ext_phy_config) \ @@ -420,8 +432,8 @@ void bnx2x_sfx7101_sp_sw_reset(struct bnx2x *bp, struct bnx2x_phy *phy); /* Read "byte_cnt" bytes from address "addr" from the SFP+ EEPROM */ int bnx2x_read_sfp_module_eeprom(struct bnx2x_phy *phy, - struct link_params *params, u16 addr, - u8 byte_cnt, u8 *o_buf); + struct link_params *params, u8 dev_addr, + u16 addr, u16 byte_cnt, u8 *o_buf); void bnx2x_hw_reset_phy(struct link_params *params);