From: Yen Lin Date: Tue, 10 Apr 2012 05:17:02 +0000 (+0000) Subject: tegra: Add warmboot implementation X-Git-Tag: v2012.07-rc1~144^2~29 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=6570438a70f01ee2c4cb6bc622d23041aab5b021;p=kernel%2Fu-boot.git tegra: Add warmboot implementation Add code to set up the warm boot area in the Tegra CPU ready for a resume after suspend. Signed-off-by: Yen Lin Signed-off-by: Simon Glass Signed-off-by: Tom Warren --- diff --git a/arch/arm/cpu/armv7/tegra2/Makefile b/arch/arm/cpu/armv7/tegra2/Makefile index dba684d..08c4137 100644 --- a/arch/arm/cpu/armv7/tegra2/Makefile +++ b/arch/arm/cpu/armv7/tegra2/Makefile @@ -27,6 +27,7 @@ # flags for any startup files it might use. CFLAGS_arch/arm/cpu/armv7/tegra2/ap20.o += -march=armv4t CFLAGS_arch/arm/cpu/armv7/tegra2/clock.o += -march=armv4t +CFLAGS_arch/arm/cpu/armv7/tegra2/warmboot_avp.o += -march=armv4t include $(TOPDIR)/config.mk @@ -37,6 +38,7 @@ COBJS-y := ap20.o board.o clock.o funcmux.o pinmux.o sys_info.o timer.o COBJS-$(CONFIG_TEGRA_CLOCK_SCALING) += emc.o COBJS-$(CONFIG_TEGRA_PMU) += pmu.o COBJS-$(CONFIG_USB_EHCI_TEGRA) += usb.o +COBJS-$(CONFIG_TEGRA2_LP0) += crypto.o warmboot.o warmboot_avp.o COBJS := $(COBJS-y) SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c) diff --git a/arch/arm/cpu/armv7/tegra2/warmboot.c b/arch/arm/cpu/armv7/tegra2/warmboot.c new file mode 100644 index 0000000..25d8968 --- /dev/null +++ b/arch/arm/cpu/armv7/tegra2/warmboot.c @@ -0,0 +1,386 @@ +/* + * (C) Copyright 2010 - 2011 + * NVIDIA Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +DECLARE_GLOBAL_DATA_PTR; + +#ifndef CONFIG_TEGRA_CLOCK_SCALING +#error "You must enable CONFIG_TEGRA_CLOCK_SCALING to use CONFIG_TEGRA2_LP0" +#endif + +/* + * This is the place in SRAM where the SDRAM parameters are stored. There + * are 4 blocks, one for each RAM code + */ +#define SDRAM_PARAMS_BASE (AP20_BASE_PA_SRAM + 0x188) + +/* TODO: If we later add support for the Misc GP controller, refactor this */ +union xm2cfga_reg { + struct { + u32 reserved0:2; + u32 hsm_en:1; + u32 reserved1:2; + u32 preemp_en:1; + u32 vref_en:1; + u32 reserved2:5; + u32 cal_drvdn:5; + u32 reserved3:3; + u32 cal_drvup:5; + u32 reserved4:3; + u32 cal_drvdn_slwr:2; + u32 cal_drvup_slwf:2; + }; + u32 word; +}; + +union xm2cfgd_reg { + struct { + u32 reserved0:2; + u32 hsm_en:1; + u32 schmt_en:1; + u32 lpmd:2; + u32 vref_en:1; + u32 reserved1:5; + u32 cal_drvdn:5; + u32 reserved2:3; + u32 cal_drvup:5; + u32 reserved3:3; + u32 cal_drvdn_slwr:2; + u32 cal_drvup_slwf:2; + }; + u32 word; +}; + +/* + * TODO: This register is not documented in the TRM yet. We could move this + * into the EMC and give it a proper interface, but not while it is + * undocumented. + */ +union fbio_spare_reg { + struct { + u32 reserved:24; + u32 cfg_wb0:8; + }; + u32 word; +}; + +/* We pack the resume information into these unions for later */ +union scratch2_reg { + struct { + u32 pllm_base_divm:5; + u32 pllm_base_divn:10; + u32 pllm_base_divp:3; + u32 pllm_misc_lfcon:4; + u32 pllm_misc_cpcon:4; + u32 gp_xm2cfga_padctrl_preemp:1; + u32 gp_xm2cfgd_padctrl_schmt:1; + u32 osc_ctrl_xobp:1; + u32 memory_type:3; + }; + u32 word; +}; + +union scratch4_reg { + struct { + u32 emc_clock_divider:8; + u32 pllm_stable_time:8; + u32 pllx_stable_time:8; + u32 emc_fbio_spare_cfg_wb0:8; + }; + u32 word; +}; + +union scratch24_reg { + struct { + u32 emc_auto_cal_wait:8; + u32 emc_pin_program_wait:8; + u32 warmboot_wait:8; + u32 reserved:8; + }; + u32 word; +}; + +int warmboot_save_sdram_params(void) +{ + u32 ram_code; + struct sdram_params sdram; + struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA2_PMC_BASE; + struct apb_misc_gp_ctlr *gp = + (struct apb_misc_gp_ctlr *)TEGRA2_APB_MISC_GP_BASE; + struct emc_ctlr *emc = emc_get_controller(gd->fdt_blob); + union scratch2_reg scratch2; + union scratch4_reg scratch4; + union scratch24_reg scratch24; + union xm2cfga_reg xm2cfga; + union xm2cfgd_reg xm2cfgd; + union fbio_spare_reg fbio_spare; + + /* get ram code that is used as index to array sdram_params in BCT */ + ram_code = (readl(&pmt->pmt_strap_opt_a) >> + STRAP_OPT_A_RAM_CODE_SHIFT) & 3; + memcpy(&sdram, + (char *)((struct sdram_params *)SDRAM_PARAMS_BASE + ram_code), + sizeof(sdram)); + + xm2cfga.word = readl(&gp->xm2cfga); + xm2cfgd.word = readl(&gp->xm2cfgd); + + scratch2.word = 0; + scratch2.osc_ctrl_xobp = clock_get_osc_bypass(); + + /* Get the memory PLL settings */ + { + u32 divm, divn, divp, cpcon, lfcon; + + if (clock_ll_read_pll(CLOCK_ID_MEMORY, &divm, &divn, &divp, + &cpcon, &lfcon)) + return -1; + scratch2.pllm_base_divm = divm; + scratch2.pllm_base_divn = divn; + scratch2.pllm_base_divp = divp; + scratch2.pllm_misc_cpcon = cpcon; + scratch2.pllm_misc_lfcon = lfcon; + } + + scratch2.gp_xm2cfga_padctrl_preemp = xm2cfga.preemp_en; + scratch2.gp_xm2cfgd_padctrl_schmt = xm2cfgd.schmt_en; + scratch2.memory_type = sdram.memory_type; + writel(scratch2.word, &pmc->pmc_scratch2); + + /* collect data from various sources for pmc_scratch4 */ + fbio_spare.word = readl(&emc->fbio_spare); + scratch4.word = 0; + scratch4.emc_fbio_spare_cfg_wb0 = fbio_spare.cfg_wb0; + scratch4.emc_clock_divider = sdram.emc_clock_divider; + scratch4.pllm_stable_time = -1; + scratch4.pllx_stable_time = -1; + writel(scratch4.word, &pmc->pmc_scratch4); + + /* collect various data from sdram for pmc_scratch24 */ + scratch24.word = 0; + scratch24.emc_pin_program_wait = sdram.emc_pin_program_wait; + scratch24.emc_auto_cal_wait = sdram.emc_auto_cal_wait; + scratch24.warmboot_wait = sdram.warm_boot_wait; + writel(scratch24.word, &pmc->pmc_scratch24); + + return 0; +} + +static u32 get_major_version(void) +{ + u32 major_id; + struct apb_misc_gp_ctlr *gp = + (struct apb_misc_gp_ctlr *)TEGRA2_APB_MISC_GP_BASE; + + major_id = (readl(&gp->hidrev) & HIDREV_MAJORPREV_MASK) >> + HIDREV_MAJORPREV_SHIFT; + return major_id; +} + +static int is_production_mode_fuse_set(struct fuse_regs *fuse) +{ + return readl(&fuse->production_mode); +} + +static int is_odm_production_mode_fuse_set(struct fuse_regs *fuse) +{ + return readl(&fuse->security_mode); +} + +static int is_failure_analysis_mode(struct fuse_regs *fuse) +{ + return readl(&fuse->fa); +} + +static int ap20_is_odm_production_mode(void) +{ + struct fuse_regs *fuse = (struct fuse_regs *)TEGRA2_FUSE_BASE; + + if (!is_failure_analysis_mode(fuse) && + is_odm_production_mode_fuse_set(fuse)) + return 1; + else + return 0; +} + +static int ap20_is_production_mode(void) +{ + struct fuse_regs *fuse = (struct fuse_regs *)TEGRA2_FUSE_BASE; + + if (get_major_version() == 0) + return 1; + + if (!is_failure_analysis_mode(fuse) && + is_production_mode_fuse_set(fuse) && + !is_odm_production_mode_fuse_set(fuse)) + return 1; + else + return 0; +} + +static enum fuse_operating_mode fuse_get_operation_mode(void) +{ + u32 chip_id; + struct apb_misc_gp_ctlr *gp = + (struct apb_misc_gp_ctlr *)TEGRA2_APB_MISC_GP_BASE; + + chip_id = (readl(&gp->hidrev) & HIDREV_CHIPID_MASK) >> + HIDREV_CHIPID_SHIFT; + if (chip_id == CHIPID_TEGRA2) { + if (ap20_is_odm_production_mode()) { + printf("!! odm_production_mode is not supported !!\n"); + return MODE_UNDEFINED; + } else + if (ap20_is_production_mode()) + return MODE_PRODUCTION; + else + return MODE_UNDEFINED; + } + return MODE_UNDEFINED; +} + +static void determine_crypto_options(int *is_encrypted, int *is_signed, + int *use_zero_key) +{ + switch (fuse_get_operation_mode()) { + case MODE_PRODUCTION: + *is_encrypted = 0; + *is_signed = 1; + *use_zero_key = 1; + break; + case MODE_UNDEFINED: + default: + *is_encrypted = 0; + *is_signed = 0; + *use_zero_key = 0; + break; + } +} + +static int sign_wb_code(u32 start, u32 length, int use_zero_key) +{ + int err; + u8 *source; /* Pointer to source */ + u8 *hash; + + /* Calculate AES block parameters. */ + source = (u8 *)(start + offsetof(struct wb_header, random_aes_block)); + length -= offsetof(struct wb_header, random_aes_block); + hash = (u8 *)(start + offsetof(struct wb_header, hash)); + err = sign_data_block(source, length, hash); + + return err; +} + +int warmboot_prepare_code(u32 seg_address, u32 seg_length) +{ + int err = 0; + u32 length; /* length of the signed/encrypt code */ + struct wb_header *dst_header; /* Pointer to dest WB header */ + int is_encrypted; /* Segment is encrypted */ + int is_signed; /* Segment is signed */ + int use_zero_key; /* Use key of all zeros */ + + /* Determine crypto options. */ + determine_crypto_options(&is_encrypted, &is_signed, &use_zero_key); + + /* Get the actual code limits. */ + length = roundup(((u32)wb_end - (u32)wb_start), 16); + + /* + * The region specified by seg_address must be in SDRAM and must be + * nonzero in length. + */ + if (seg_length == 0 || seg_address < NV_PA_SDRAM_BASE || + seg_address + seg_length >= NV_PA_SDRAM_BASE + gd->ram_size) { + err = -EFAULT; + goto fail; + } + + /* Things must be 16-byte aligned. */ + if ((seg_length & 0xF) || (seg_address & 0xF)) { + err = -EINVAL; + goto fail; + } + + /* Will the code fit? (destination includes wb_header + wb code) */ + if (seg_length < (length + sizeof(struct wb_header))) { + err = -EINVAL; + goto fail; + } + + dst_header = (struct wb_header *)seg_address; + memset((char *)dst_header, 0, sizeof(struct wb_header)); + + /* Populate the random_aes_block as requested. */ + { + u32 *aes_block = (u32 *)&(dst_header->random_aes_block); + u32 *end = (u32 *)(((u32)aes_block) + + sizeof(dst_header->random_aes_block)); + + do { + *aes_block++ = 0; + } while (aes_block < end); + } + + /* Populate the header. */ + dst_header->length_insecure = length + sizeof(struct wb_header); + dst_header->length_secure = length + sizeof(struct wb_header); + dst_header->destination = AP20_WB_RUN_ADDRESS; + dst_header->entry_point = AP20_WB_RUN_ADDRESS; + dst_header->code_length = length; + + if (is_encrypted) { + printf("!!!! Encryption is not supported !!!!\n"); + dst_header->length_insecure = 0; + err = -EACCES; + goto fail; + } else + /* copy the wb code directly following dst_header. */ + memcpy((char *)(dst_header+1), (char *)wb_start, length); + + if (is_signed) + err = sign_wb_code(seg_address, dst_header->length_insecure, + use_zero_key); + +fail: + if (err) + printf("Warning: warmboot code copy failed (error=%d)\n", err); + + return err; +} diff --git a/arch/arm/cpu/armv7/tegra2/warmboot_avp.c b/arch/arm/cpu/armv7/tegra2/warmboot_avp.c new file mode 100644 index 0000000..70bcd8e --- /dev/null +++ b/arch/arm/cpu/armv7/tegra2/warmboot_avp.c @@ -0,0 +1,250 @@ +/* + * (C) Copyright 2010 - 2011 + * NVIDIA Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "warmboot_avp.h" + +#define DEBUG_RESET_CORESIGHT + +void wb_start(void) +{ + struct pmux_tri_ctlr *pmt = (struct pmux_tri_ctlr *)NV_PA_APB_MISC_BASE; + struct pmc_ctlr *pmc = (struct pmc_ctlr *)TEGRA2_PMC_BASE; + struct flow_ctlr *flow = (struct flow_ctlr *)NV_PA_FLOW_BASE; + struct clk_rst_ctlr *clkrst = + (struct clk_rst_ctlr *)NV_PA_CLK_RST_BASE; + union osc_ctrl_reg osc_ctrl; + union pllx_base_reg pllx_base; + union pllx_misc_reg pllx_misc; + union scratch3_reg scratch3; + u32 reg; + + /* enable JTAG & TBE */ + writel(CONFIG_CTL_TBE | CONFIG_CTL_JTAG, &pmt->pmt_cfg_ctl); + + /* Are we running where we're supposed to be? */ + asm volatile ( + "adr %0, wb_start;" /* reg: wb_start address */ + : "=r"(reg) /* output */ + /* no input, no clobber list */ + ); + + if (reg != AP20_WB_RUN_ADDRESS) + goto do_reset; + + /* Are we running with AVP? */ + if (readl(NV_PA_PG_UP_BASE + PG_UP_TAG_0) != PG_UP_TAG_AVP) + goto do_reset; + +#ifdef DEBUG_RESET_CORESIGHT + /* Assert CoreSight reset */ + reg = readl(&clkrst->crc_rst_dev[TEGRA_DEV_U]); + reg |= SWR_CSITE_RST; + writel(reg, &clkrst->crc_rst_dev[TEGRA_DEV_U]); +#endif + + /* TODO: Set the drive strength - maybe make this a board parameter? */ + osc_ctrl.word = readl(&clkrst->crc_osc_ctrl); + osc_ctrl.xofs = 4; + osc_ctrl.xoe = 1; + writel(osc_ctrl.word, &clkrst->crc_osc_ctrl); + + /* Power up the CPU complex if necessary */ + if (!(readl(&pmc->pmc_pwrgate_status) & PWRGATE_STATUS_CPU)) { + reg = PWRGATE_TOGGLE_PARTID_CPU | PWRGATE_TOGGLE_START; + writel(reg, &pmc->pmc_pwrgate_toggle); + while (!(readl(&pmc->pmc_pwrgate_status) & PWRGATE_STATUS_CPU)) + ; + } + + /* Remove the I/O clamps from the CPU power partition. */ + reg = readl(&pmc->pmc_remove_clamping); + reg |= CPU_CLMP; + writel(reg, &pmc->pmc_remove_clamping); + + reg = EVENT_ZERO_VAL_20 | EVENT_MSEC | EVENT_MODE_STOP; + writel(reg, &flow->halt_cop_events); + + /* Assert CPU complex reset */ + reg = readl(&clkrst->crc_rst_dev[TEGRA_DEV_L]); + reg |= CPU_RST; + writel(reg, &clkrst->crc_rst_dev[TEGRA_DEV_L]); + + /* Hold both CPUs in reset */ + reg = CPU_CMPLX_CPURESET0 | CPU_CMPLX_CPURESET1 | CPU_CMPLX_DERESET0 | + CPU_CMPLX_DERESET1 | CPU_CMPLX_DBGRESET0 | CPU_CMPLX_DBGRESET1; + writel(reg, &clkrst->crc_cpu_cmplx_set); + + /* Halt CPU1 at the flow controller for uni-processor configurations */ + writel(EVENT_MODE_STOP, &flow->halt_cpu1_events); + + /* + * Set the CPU reset vector. SCRATCH41 contains the physical + * address of the CPU-side restoration code. + */ + reg = readl(&pmc->pmc_scratch41); + writel(reg, EXCEP_VECTOR_CPU_RESET_VECTOR); + + /* Select CPU complex clock source */ + writel(CCLK_PLLP_BURST_POLICY, &clkrst->crc_cclk_brst_pol); + + /* Start the CPU0 clock and stop the CPU1 clock */ + reg = CPU_CMPLX_CPU_BRIDGE_CLKDIV_4 | CPU_CMPLX_CPU0_CLK_STP_RUN | + CPU_CMPLX_CPU1_CLK_STP_STOP; + writel(reg, &clkrst->crc_clk_cpu_cmplx); + + /* Enable the CPU complex clock */ + reg = readl(&clkrst->crc_clk_out_enb[TEGRA_DEV_L]); + reg |= CLK_ENB_CPU; + writel(reg, &clkrst->crc_clk_out_enb[TEGRA_DEV_L]); + + /* Make sure the resets were held for at least 2 microseconds */ + reg = readl(TIMER_USEC_CNTR); + while (readl(TIMER_USEC_CNTR) <= (reg + 2)) + ; + +#ifdef DEBUG_RESET_CORESIGHT + /* + * De-assert CoreSight reset. + * NOTE: We're leaving the CoreSight clock on the oscillator for + * now. It will be restored to its original clock source + * when the CPU-side restoration code runs. + */ + reg = readl(&clkrst->crc_rst_dev[TEGRA_DEV_U]); + reg &= ~SWR_CSITE_RST; + writel(reg, &clkrst->crc_rst_dev[TEGRA_DEV_U]); +#endif + + /* Unlock the CPU CoreSight interfaces */ + reg = 0xC5ACCE55; + writel(reg, CSITE_CPU_DBG0_LAR); + writel(reg, CSITE_CPU_DBG1_LAR); + + /* + * Sample the microsecond timestamp again. This is the time we must + * use when returning from LP0 for PLL stabilization delays. + */ + reg = readl(TIMER_USEC_CNTR); + writel(reg, &pmc->pmc_scratch1); + + pllx_base.word = 0; + pllx_misc.word = 0; + scratch3.word = readl(&pmc->pmc_scratch3); + + /* Get the OSC. For 19.2 MHz, use 19 to make the calculations easier */ + reg = (readl(TIMER_USEC_CFG) & USEC_CFG_DIVISOR_MASK) + 1; + + /* + * According to the TRM, for 19.2MHz OSC, the USEC_DIVISOR is 0x5f, and + * USEC_DIVIDEND is 0x04. So, if USEC_DIVISOR > 26, OSC is 19.2 MHz. + * + * reg is used to calculate the pllx freq, which is used to determine if + * to set dccon or not. + */ + if (reg > 26) + reg = 19; + + /* PLLX_BASE.PLLX_DIVM */ + if (scratch3.pllx_base_divm == reg) + reg = 0; + else + reg = 1; + + /* PLLX_BASE.PLLX_DIVN */ + pllx_base.divn = scratch3.pllx_base_divn; + reg = scratch3.pllx_base_divn << reg; + + /* PLLX_BASE.PLLX_DIVP */ + pllx_base.divp = scratch3.pllx_base_divp; + reg = reg >> scratch3.pllx_base_divp; + + pllx_base.bypass = 1; + + /* PLLX_MISC_DCCON must be set for pllx frequency > 600 MHz. */ + if (reg > 600) + pllx_misc.dccon = 1; + + /* PLLX_MISC_LFCON */ + pllx_misc.lfcon = scratch3.pllx_misc_lfcon; + + /* PLLX_MISC_CPCON */ + pllx_misc.cpcon = scratch3.pllx_misc_cpcon; + + writel(pllx_misc.word, &clkrst->crc_pll_simple[SIMPLE_PLLX].pll_misc); + writel(pllx_base.word, &clkrst->crc_pll_simple[SIMPLE_PLLX].pll_base); + + pllx_base.enable = 1; + writel(pllx_base.word, &clkrst->crc_pll_simple[SIMPLE_PLLX].pll_base); + pllx_base.bypass = 0; + writel(pllx_base.word, &clkrst->crc_pll_simple[SIMPLE_PLLX].pll_base); + + writel(0, flow->halt_cpu_events); + + reg = CPU_CMPLX_CPURESET0 | CPU_CMPLX_DBGRESET0 | CPU_CMPLX_DERESET0; + writel(reg, &clkrst->crc_cpu_cmplx_clr); + + reg = PLLM_OUT1_RSTN_RESET_DISABLE | PLLM_OUT1_CLKEN_ENABLE | + PLLM_OUT1_RATIO_VAL_8; + writel(reg, &clkrst->crc_pll[CLOCK_ID_MEMORY].pll_out); + + reg = SCLK_SWAKE_FIQ_SRC_PLLM_OUT1 | SCLK_SWAKE_IRQ_SRC_PLLM_OUT1 | + SCLK_SWAKE_RUN_SRC_PLLM_OUT1 | SCLK_SWAKE_IDLE_SRC_PLLM_OUT1 | + SCLK_SYS_STATE_IDLE; + writel(reg, &clkrst->crc_sclk_brst_pol); + + /* avp_resume: no return after the write */ + reg = readl(&clkrst->crc_rst_dev[TEGRA_DEV_L]); + reg &= ~CPU_RST; + writel(reg, &clkrst->crc_rst_dev[TEGRA_DEV_L]); + + /* avp_halt: */ +avp_halt: + reg = EVENT_MODE_STOP | EVENT_JTAG; + writel(reg, flow->halt_cop_events); + goto avp_halt; + +do_reset: + /* + * Execution comes here if something goes wrong. The chip is reset and + * a cold boot is performed. + */ + writel(SWR_TRIG_SYS_RST, &clkrst->crc_rst_dev[TEGRA_DEV_L]); + goto do_reset; +} + +/* + * wb_end() is a dummy function, and must be directly following wb_start(), + * and is used to calculate the size of wb_start(). + */ +void wb_end(void) +{ +} diff --git a/arch/arm/cpu/armv7/tegra2/warmboot_avp.h b/arch/arm/cpu/armv7/tegra2/warmboot_avp.h new file mode 100644 index 0000000..4b71c07 --- /dev/null +++ b/arch/arm/cpu/armv7/tegra2/warmboot_avp.h @@ -0,0 +1,81 @@ +/* + * (C) Copyright 2010, 2011 + * NVIDIA Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _WARMBOOT_AVP_H_ +#define _WARMBOOT_AVP_H_ + +#define TEGRA_DEV_L 0 +#define TEGRA_DEV_H 1 +#define TEGRA_DEV_U 2 + +#define SIMPLE_PLLX (CLOCK_ID_XCPU - CLOCK_ID_FIRST_SIMPLE) +#define SIMPLE_PLLE (CLOCK_ID_EPCI - CLOCK_ID_FIRST_SIMPLE) + +#define TIMER_USEC_CNTR (NV_PA_TMRUS_BASE + 0) +#define TIMER_USEC_CFG (NV_PA_TMRUS_BASE + 4) + +#define USEC_CFG_DIVISOR_MASK 0xffff + +#define CONFIG_CTL_TBE (1 << 7) +#define CONFIG_CTL_JTAG (1 << 6) + +#define CPU_RST (1 << 0) +#define CLK_ENB_CPU (1 << 0) +#define SWR_TRIG_SYS_RST (1 << 2) +#define SWR_CSITE_RST (1 << 9) + +#define PWRGATE_STATUS_CPU (1 << 0) +#define PWRGATE_TOGGLE_PARTID_CPU (0 << 0) +#define PWRGATE_TOGGLE_START (1 << 8) + +#define CPU_CMPLX_CPU_BRIDGE_CLKDIV_4 (3 << 0) +#define CPU_CMPLX_CPU0_CLK_STP_STOP (1 << 8) +#define CPU_CMPLX_CPU0_CLK_STP_RUN (0 << 8) +#define CPU_CMPLX_CPU1_CLK_STP_STOP (1 << 9) +#define CPU_CMPLX_CPU1_CLK_STP_RUN (0 << 9) + +#define CPU_CMPLX_CPURESET0 (1 << 0) +#define CPU_CMPLX_CPURESET1 (1 << 1) +#define CPU_CMPLX_DERESET0 (1 << 4) +#define CPU_CMPLX_DERESET1 (1 << 5) +#define CPU_CMPLX_DBGRESET0 (1 << 12) +#define CPU_CMPLX_DBGRESET1 (1 << 13) + +#define PLLM_OUT1_RSTN_RESET_DISABLE (1 << 0) +#define PLLM_OUT1_CLKEN_ENABLE (1 << 1) +#define PLLM_OUT1_RATIO_VAL_8 (8 << 8) + +#define SCLK_SYS_STATE_IDLE (1 << 28) +#define SCLK_SWAKE_FIQ_SRC_PLLM_OUT1 (7 << 12) +#define SCLK_SWAKE_IRQ_SRC_PLLM_OUT1 (7 << 8) +#define SCLK_SWAKE_RUN_SRC_PLLM_OUT1 (7 << 4) +#define SCLK_SWAKE_IDLE_SRC_PLLM_OUT1 (7 << 0) + +#define EVENT_ZERO_VAL_20 (20 << 0) +#define EVENT_MSEC (1 << 24) +#define EVENT_JTAG (1 << 28) +#define EVENT_MODE_STOP (2 << 29) + +#define CCLK_PLLP_BURST_POLICY 0x20004444 + +#endif diff --git a/arch/arm/include/asm/arch-tegra2/warmboot.h b/arch/arm/include/asm/arch-tegra2/warmboot.h new file mode 100644 index 0000000..99ac2e7 --- /dev/null +++ b/arch/arm/include/asm/arch-tegra2/warmboot.h @@ -0,0 +1,150 @@ +/* + * (C) Copyright 2010, 2011 + * NVIDIA Corporation + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +#ifndef _WARM_BOOT_H_ +#define _WARM_BOOT_H_ + +#define STRAP_OPT_A_RAM_CODE_SHIFT 4 +#define STRAP_OPT_A_RAM_CODE_MASK (0xf << STRAP_OPT_A_RAM_CODE_SHIFT) + +/* Defines the supported operating modes */ +enum fuse_operating_mode { + MODE_PRODUCTION = 3, + MODE_UNDEFINED, +}; + +/* Defines the CMAC-AES-128 hash length in 32 bit words. (128 bits = 4 words) */ +enum { + HASH_LENGTH = 4 +}; + +/* Defines the storage for a hash value (128 bits) */ +struct hash { + u32 hash[HASH_LENGTH]; +}; + +/* + * Defines the code header information for the boot rom. + * + * The code immediately follows the code header. + * + * Note that the code header needs to be 16 bytes aligned to preserve + * the alignment of relevant data for hash and decryption computations without + * requiring extra copies to temporary memory areas. + */ +struct wb_header { + u32 length_insecure; /* length of the code header */ + u32 reserved[3]; + struct hash hash; /* hash of header+code, starts next field*/ + struct hash random_aes_block; /* a data block to aid security. */ + u32 length_secure; /* length of the code header */ + u32 destination; /* destination address to put the wb code */ + u32 entry_point; /* execution address of the wb code */ + u32 code_length; /* length of the code */ +}; + +/* + * The warm boot code needs direct access to these registers since it runs in + * SRAM and cannot call other U-Boot code. + */ +union osc_ctrl_reg { + struct { + u32 xoe:1; + u32 xobp:1; + u32 reserved0:2; + u32 xofs:6; + u32 reserved1:2; + u32 xods:5; + u32 reserved2:3; + u32 oscfi_spare:8; + u32 pll_ref_div:2; + u32 osc_freq:2; + }; + u32 word; +}; + +union pllx_base_reg { + struct { + u32 divm:5; + u32 reserved0:3; + u32 divn:10; + u32 reserved1:2; + u32 divp:3; + u32 reserved2:4; + u32 lock:1; + u32 reserved3:1; + u32 ref_dis:1; + u32 enable:1; + u32 bypass:1; + }; + u32 word; +}; + +union pllx_misc_reg { + struct { + u32 vcocon:4; + u32 lfcon:4; + u32 cpcon:4; + u32 lock_sel:6; + u32 reserved0:1; + u32 lock_enable:1; + u32 reserved1:1; + u32 dccon:1; + u32 pts:2; + u32 reserved2:6; + u32 out1_div_byp:1; + u32 out1_inv_clk:1; + }; + u32 word; +}; + +/* + * TODO: This register is not documented in the TRM yet. We could move this + * into the EMC and give it a proper interface, but not while it is + * undocumented. + */ +union scratch3_reg { + struct { + u32 pllx_base_divm:5; + u32 pllx_base_divn:10; + u32 pllx_base_divp:3; + u32 pllx_misc_lfcon:4; + u32 pllx_misc_cpcon:4; + }; + u32 word; +}; + + +/** + * Save warmboot memory settings for a later resume + * + * @return 0 if ok, -1 on error + */ +int warmboot_save_sdram_params(void); + +int warmboot_prepare_code(u32 seg_address, u32 seg_length); +int sign_data_block(u8 *source, u32 length, u8 *signature); +void wb_start(void); /* Start of WB assembly code */ +void wb_end(void); /* End of WB assembly code */ + +#endif