From: Phil Elwell <phil@raspberrypi.org>
Date: Thu, 25 Jun 2015 11:16:11 +0000 (+0100)
Subject: gpio-poweroff: Allow it to work on Raspberry Pi
X-Git-Tag: accepted/tizen/unified/20230118.172025~1490
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=647598f5b7c827de79f993b6ca4c3e9c5718a080;p=platform%2Fkernel%2Flinux-rpi.git

gpio-poweroff: Allow it to work on Raspberry Pi

The Raspberry Pi firmware manages the power-down and reboot
process. To do this it installs a pm_power_off handler, causing
the gpio-poweroff module to abort the probe function.

This patch introduces a "force" DT property that overrides that
behaviour, and also adds a DT overlay to enable and control it.

Note that running in an active-low configuration (DT parameter
"active_low") requires a custom dt-blob.bin and probably won't
allow a reboot without switching off, so an external inversion
of the trigger signal may be preferable.
---

diff --git a/drivers/power/reset/gpio-poweroff.c b/drivers/power/reset/gpio-poweroff.c
index 1c5af2f..3e67013 100644
--- a/drivers/power/reset/gpio-poweroff.c
+++ b/drivers/power/reset/gpio-poweroff.c
@@ -50,9 +50,11 @@ static int gpio_poweroff_probe(struct platform_device *pdev)
 {
 	bool input = false;
 	enum gpiod_flags flags;
+	bool force = false;
 
 	/* If a pm_power_off function has already been added, leave it alone */
-	if (pm_power_off != NULL) {
+	force = of_property_read_bool(pdev->dev.of_node, "force");
+	if (!force && (pm_power_off != NULL)) {
 		dev_err(&pdev->dev,
 			"%s: pm_power_off function already registered\n",
 		       __func__);