From: Mathias Nyman Date: Mon, 24 Oct 2022 14:27:18 +0000 (+0300) Subject: xhci: Add quirk to reset host back to default state at shutdown X-Git-Tag: v5.15.79~393 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=64058af657ba202cebe10044b5fadcb79d16de9d;p=platform%2Fkernel%2Flinux-rpi.git xhci: Add quirk to reset host back to default state at shutdown commit 34cd2db408d591bc15771cbcc90939ade0a99a21 upstream. Systems based on Alder Lake P see significant boot time delay if boot firmware tries to control usb ports in unexpected link states. This is seen with self-powered usb devices that survive in U3 link suspended state over S5. A more generic solution to power off ports at shutdown was attempted in commit 83810f84ecf1 ("xhci: turn off port power in shutdown") but it caused regression. Add host specific XHCI_RESET_TO_DEFAULT quirk which will reset host and ports back to default state in shutdown. Cc: stable@vger.kernel.org Signed-off-by: Mathias Nyman Link: https://lore.kernel.org/r/20221024142720.4122053-3-mathias.nyman@intel.com Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 3f4fab3..62312e8 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -259,6 +259,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) xhci->quirks |= XHCI_MISSING_CAS; if (pdev->vendor == PCI_VENDOR_ID_INTEL && + pdev->device == PCI_DEVICE_ID_INTEL_ALDER_LAKE_PCH_XHCI) + xhci->quirks |= XHCI_RESET_TO_DEFAULT; + + if (pdev->vendor == PCI_VENDOR_ID_INTEL && (pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_2C_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_4C_XHCI || pdev->device == PCI_DEVICE_ID_INTEL_ALPINE_RIDGE_LP_XHCI || diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 8c77106..3636fa4 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -795,9 +795,15 @@ void xhci_shutdown(struct usb_hcd *hcd) spin_lock_irq(&xhci->lock); xhci_halt(xhci); - /* Workaround for spurious wakeups at shutdown with HSW */ - if (xhci->quirks & XHCI_SPURIOUS_WAKEUP) + + /* + * Workaround for spurious wakeps at shutdown with HSW, and for boot + * firmware delay in ADL-P PCH if port are left in U3 at shutdown + */ + if (xhci->quirks & XHCI_SPURIOUS_WAKEUP || + xhci->quirks & XHCI_RESET_TO_DEFAULT) xhci_reset(xhci, XHCI_RESET_SHORT_USEC); + spin_unlock_irq(&xhci->lock); xhci_cleanup_msix(xhci); diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 3b39501..d3c0766 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -1904,6 +1904,7 @@ struct xhci_hcd { #define XHCI_BROKEN_D3COLD BIT_ULL(41) #define XHCI_EP_CTX_BROKEN_DCS BIT_ULL(42) #define XHCI_SUSPEND_RESUME_CLKS BIT_ULL(43) +#define XHCI_RESET_TO_DEFAULT BIT_ULL(44) unsigned int num_active_eps; unsigned int limit_active_eps;