From: Abhijeet Dharmapurikar Date: Wed, 10 May 2017 14:25:38 +0000 (+0530) Subject: spmi: pmic_arb: use appropriate flow handler X-Git-Tag: v4.14-rc1~620^2~107 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=5f9b2ea3da8cf079e22cbb0fc2ed1b9034f7dd42;p=platform%2Fkernel%2Flinux-rpi.git spmi: pmic_arb: use appropriate flow handler The current code uses handle_level_irq flow handler even if the trigger type of the interrupt is edge. This can lead to missing of an edge transition that happens when the interrupt is being handled. The level flow handler masks the interrupt while it is being handled, so if an edge transition happens at that time, that edge is lost. Use an edge flow handler for edge type interrupts which ensures that the interrupt stays enabled while being handled - at least until it triggers at which point the flow handler sets the IRQF_PENDING flag and only then masks the interrupt. That IRQF_PENDING state indicates an edge transition happened while the interrupt was being handled and the handler is called again. Signed-off-by: Abhijeet Dharmapurikar Signed-off-by: Kiran Gunda Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/spmi/spmi-pmic-arb.c b/drivers/spmi/spmi-pmic-arb.c index 1d23df0..ad34491 100644 --- a/drivers/spmi/spmi-pmic-arb.c +++ b/drivers/spmi/spmi-pmic-arb.c @@ -625,6 +625,12 @@ static int qpnpint_irq_set_type(struct irq_data *d, unsigned int flow_type) } qpnpint_spmi_write(d, QPNPINT_REG_SET_TYPE, &type, sizeof(type)); + + if (flow_type & IRQ_TYPE_EDGE_BOTH) + irq_set_handler_locked(d, handle_edge_irq); + else + irq_set_handler_locked(d, handle_level_irq); + return 0; }