From: Arend van Spriel Date: Fri, 8 Feb 2013 14:53:41 +0000 (+0100) Subject: brcmfmac: implement support for deleting virtual interfaces X-Git-Tag: v5.15~20710^2~31^2^2~45 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=5f4f9f114eef4907b6077d19dd5ad7d0a27e0f80;p=platform%2Fkernel%2Flinux-starfive.git brcmfmac: implement support for deleting virtual interfaces Deletion of the virtual interface was not fully supported so adding it now. Tested using p2p_connect command in wpa_supplicant. Reviewed-by: Pieter-Paul Giesberts Reviewed-by: Hante Meuleman Signed-off-by: Arend van Spriel Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h index 82724d3..c4f30bd 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/dhd.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd.h @@ -150,6 +150,7 @@ #define BRCMF_E_REASON_MINTXRATE 9 #define BRCMF_E_REASON_TXFAIL 10 +#define BRCMF_E_REASON_LINK_BSSCFG_DIS 4 #define BRCMF_E_REASON_FAST_ROAM_FAILED 5 #define BRCMF_E_REASON_DIRECTED_ROAM 6 #define BRCMF_E_REASON_TSPEC_REJECTED 7 diff --git a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c index cec4116..fff5722 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/p2p.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/p2p.c @@ -827,6 +827,26 @@ static int brcmf_p2p_request_p2p_if(struct brcmf_if *ifp, u8 ea[ETH_ALEN], return err; } +static int brcmf_p2p_disable_p2p_if(struct brcmf_cfg80211_vif *vif) +{ + struct brcmf_cfg80211_info *cfg = wdev_to_cfg(&vif->wdev); + struct net_device *pri_ndev = cfg_to_ndev(cfg); + struct brcmf_if *ifp = netdev_priv(pri_ndev); + u8 *addr = vif->wdev.netdev->dev_addr; + + return brcmf_fil_iovar_data_set(ifp, "p2p_ifdis", addr, ETH_ALEN); +} + +static int brcmf_p2p_release_p2p_if(struct brcmf_cfg80211_vif *vif) +{ + struct brcmf_cfg80211_info *cfg = wdev_to_cfg(&vif->wdev); + struct net_device *pri_ndev = cfg_to_ndev(cfg); + struct brcmf_if *ifp = netdev_priv(pri_ndev); + u8 *addr = vif->wdev.netdev->dev_addr; + + return brcmf_fil_iovar_data_set(ifp, "p2p_ifdel", addr, ETH_ALEN); +} + /** * brcmf_p2p_add_vif() - create a new P2P virtual interface. * @@ -910,23 +930,43 @@ int brcmf_p2p_del_vif(struct wiphy *wiphy, struct wireless_dev *wdev) { struct brcmf_cfg80211_info *cfg = wiphy_priv(wiphy); struct brcmf_cfg80211_vif *vif; + unsigned long jiffie_timeout = msecs_to_jiffies(1500); + bool wait_for_disable = false; int err; + brcmf_dbg(TRACE, "delete P2P vif\n"); vif = container_of(wdev, struct brcmf_cfg80211_vif, wdev); - if (brcmf_cfg80211_vif_event_armed(cfg)) - return -EBUSY; + switch (vif->wdev.iftype) { + case NL80211_IFTYPE_P2P_CLIENT: + if (test_bit(BRCMF_VIF_STATUS_DISCONNECTING, &vif->sme_state)) + wait_for_disable = true; + break; + + case NL80211_IFTYPE_P2P_GO: + if (!brcmf_p2p_disable_p2p_if(vif)) + wait_for_disable = true; + break; + + case NL80211_IFTYPE_P2P_DEVICE: + default: + return -ENOTSUPP; + break; + } + + if (wait_for_disable) + wait_for_completion_timeout(&cfg->vif_disabled, 500); + + brcmf_vif_clear_mgmt_ies(vif); brcmf_cfg80211_arm_vif_event(cfg, vif); - /* wait for firmware event */ - err = brcmf_cfg80211_wait_vif_event_timeout(cfg, BRCMF_E_IF_DEL, - msecs_to_jiffies(1500)); + err = brcmf_p2p_release_p2p_if(vif); + if (!err) + /* wait for firmware event */ + err = brcmf_cfg80211_wait_vif_event_timeout(cfg, BRCMF_E_IF_DEL, + jiffie_timeout); brcmf_cfg80211_arm_vif_event(cfg, NULL); - if (wdev->netdev) - brcmf_dbg(INFO, "deleting vif \"%s\"\n", wdev->netdev->name); - else - brcmf_dbg(INFO, "deleting vif \"wdev-%u\"\n", - wdev->identifier); - brcmf_err("enter - not supported yet\n"); - return -EOPNOTSUPP; + brcmf_free_vif(vif); + + return err; } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c index 6cd47e2..d792c3b 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.c @@ -445,9 +445,103 @@ static struct wireless_dev *brcmf_cfg80211_add_iface(struct wiphy *wiphy, } } +static void brcmf_set_mpc(struct net_device *ndev, int mpc) +{ + struct brcmf_if *ifp = netdev_priv(ndev); + s32 err = 0; + + if (check_vif_up(ifp->vif)) { + err = brcmf_fil_iovar_int_set(ifp, "mpc", mpc); + if (err) { + brcmf_err("fail to set mpc\n"); + return; + } + brcmf_dbg(INFO, "MPC : %d\n", mpc); + } +} + +static s32 +brcmf_notify_escan_complete(struct brcmf_cfg80211_info *cfg, + struct net_device *ndev, + bool aborted, bool fw_abort) +{ + struct brcmf_scan_params_le params_le; + struct cfg80211_scan_request *scan_request; + s32 err = 0; + + brcmf_dbg(SCAN, "Enter\n"); + + /* clear scan request, because the FW abort can cause a second call */ + /* to this functon and might cause a double cfg80211_scan_done */ + scan_request = cfg->scan_request; + cfg->scan_request = NULL; + + if (timer_pending(&cfg->escan_timeout)) + del_timer_sync(&cfg->escan_timeout); + + if (fw_abort) { + /* Do a scan abort to stop the driver's scan engine */ + brcmf_dbg(SCAN, "ABORT scan in firmware\n"); + memset(¶ms_le, 0, sizeof(params_le)); + memset(params_le.bssid, 0xFF, ETH_ALEN); + params_le.bss_type = DOT11_BSSTYPE_ANY; + params_le.scan_type = 0; + params_le.channel_num = cpu_to_le32(1); + params_le.nprobes = cpu_to_le32(1); + params_le.active_time = cpu_to_le32(-1); + params_le.passive_time = cpu_to_le32(-1); + params_le.home_time = cpu_to_le32(-1); + /* Scan is aborted by setting channel_list[0] to -1 */ + params_le.channel_list[0] = cpu_to_le16(-1); + /* E-Scan (or anyother type) can be aborted by SCAN */ + err = brcmf_fil_cmd_data_set(netdev_priv(ndev), BRCMF_C_SCAN, + ¶ms_le, sizeof(params_le)); + if (err) + brcmf_err("Scan abort failed\n"); + } + /* + * e-scan can be initiated by scheduled scan + * which takes precedence. + */ + if (cfg->sched_escan) { + brcmf_dbg(SCAN, "scheduled scan completed\n"); + cfg->sched_escan = false; + if (!aborted) + cfg80211_sched_scan_results(cfg_to_wiphy(cfg)); + brcmf_set_mpc(ndev, 1); + } else if (scan_request) { + brcmf_dbg(SCAN, "ESCAN Completed scan: %s\n", + aborted ? "Aborted" : "Done"); + cfg80211_scan_done(scan_request, aborted); + brcmf_set_mpc(ndev, 1); + } + if (!test_and_clear_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) { + brcmf_err("Scan complete while device not scanning\n"); + return -EPERM; + } + + return err; +} + static int brcmf_cfg80211_del_iface(struct wiphy *wiphy, struct wireless_dev *wdev) { + struct brcmf_cfg80211_info *cfg = wiphy_priv(wiphy); + struct net_device *ndev = wdev->netdev; + + /* vif event pending in firmware */ + if (brcmf_cfg80211_vif_event_armed(cfg)) + return -EBUSY; + + if (ndev) { + if (test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status) && + cfg->escan_info.ndev == ndev) + brcmf_notify_escan_complete(cfg, ndev, true, + true); + + brcmf_fil_iovar_int_set(netdev_priv(ndev), "mpc", 1); + } + switch (wdev->iftype) { case NL80211_IFTYPE_ADHOC: case NL80211_IFTYPE_STATION: @@ -525,21 +619,6 @@ done: return err; } -static void brcmf_set_mpc(struct net_device *ndev, int mpc) -{ - struct brcmf_if *ifp = netdev_priv(ndev); - s32 err = 0; - - if (check_vif_up(ifp->vif)) { - err = brcmf_fil_iovar_int_set(ifp, "mpc", mpc); - if (err) { - brcmf_err("fail to set mpc\n"); - return; - } - brcmf_dbg(INFO, "MPC : %d\n", mpc); - } -} - static void brcmf_escan_prep(struct brcmf_scan_params_le *params_le, struct cfg80211_scan_request *request) { @@ -620,69 +699,6 @@ static void brcmf_escan_prep(struct brcmf_scan_params_le *params_le, } static s32 -brcmf_notify_escan_complete(struct brcmf_cfg80211_info *cfg, - struct net_device *ndev, - bool aborted, bool fw_abort) -{ - struct brcmf_scan_params_le params_le; - struct cfg80211_scan_request *scan_request; - s32 err = 0; - - brcmf_dbg(SCAN, "Enter\n"); - - /* clear scan request, because the FW abort can cause a second call */ - /* to this functon and might cause a double cfg80211_scan_done */ - scan_request = cfg->scan_request; - cfg->scan_request = NULL; - - if (timer_pending(&cfg->escan_timeout)) - del_timer_sync(&cfg->escan_timeout); - - if (fw_abort) { - /* Do a scan abort to stop the driver's scan engine */ - brcmf_dbg(SCAN, "ABORT scan in firmware\n"); - memset(¶ms_le, 0, sizeof(params_le)); - memset(params_le.bssid, 0xFF, ETH_ALEN); - params_le.bss_type = DOT11_BSSTYPE_ANY; - params_le.scan_type = 0; - params_le.channel_num = cpu_to_le32(1); - params_le.nprobes = cpu_to_le32(1); - params_le.active_time = cpu_to_le32(-1); - params_le.passive_time = cpu_to_le32(-1); - params_le.home_time = cpu_to_le32(-1); - /* Scan is aborted by setting channel_list[0] to -1 */ - params_le.channel_list[0] = cpu_to_le16(-1); - /* E-Scan (or anyother type) can be aborted by SCAN */ - err = brcmf_fil_cmd_data_set(netdev_priv(ndev), BRCMF_C_SCAN, - ¶ms_le, sizeof(params_le)); - if (err) - brcmf_err("Scan abort failed\n"); - } - /* - * e-scan can be initiated by scheduled scan - * which takes precedence. - */ - if (cfg->sched_escan) { - brcmf_dbg(SCAN, "scheduled scan completed\n"); - cfg->sched_escan = false; - if (!aborted) - cfg80211_sched_scan_results(cfg_to_wiphy(cfg)); - brcmf_set_mpc(ndev, 1); - } else if (scan_request) { - brcmf_dbg(SCAN, "ESCAN Completed scan: %s\n", - aborted ? "Aborted" : "Done"); - cfg80211_scan_done(scan_request, aborted); - brcmf_set_mpc(ndev, 1); - } - if (!test_and_clear_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) { - brcmf_err("Scan complete while device not scanning\n"); - return -EPERM; - } - - return err; -} - -static s32 brcmf_run_escan(struct brcmf_cfg80211_info *cfg, struct net_device *ndev, struct cfg80211_scan_request *request, u16 action) { @@ -3474,6 +3490,22 @@ exit: return err; } +s32 brcmf_vif_clear_mgmt_ies(struct brcmf_cfg80211_vif *vif) +{ + s32 pktflags[] = { + BRCMF_VNDR_IE_PRBREQ_FLAG, + BRCMF_VNDR_IE_PRBRSP_FLAG, + BRCMF_VNDR_IE_BEACON_FLAG + }; + int i; + + for (i = 0; i < ARRAY_SIZE(pktflags); i++) + brcmf_vif_set_mgmt_ie(vif, pktflags[i], NULL, 0); + + memset(&vif->saved_ie, 0, sizeof(vif->saved_ie)); + return 0; +} + static s32 brcmf_cfg80211_start_ap(struct wiphy *wiphy, struct net_device *ndev, struct cfg80211_ap_settings *settings) @@ -4260,6 +4292,12 @@ brcmf_notify_connect_status_ap(struct brcmf_cfg80211_info *cfg, struct station_info sinfo; brcmf_dbg(CONN, "event %d, reason %d\n", event, reason); + if (event == BRCMF_E_LINK && reason == BRCMF_E_REASON_LINK_BSSCFG_DIS && + ndev != cfg_to_ndev(cfg)) { + brcmf_dbg(CONN, "AP mode link down\n"); + complete(&cfg->vif_disabled); + return 0; + } if (((event == BRCMF_E_ASSOC_IND) || (event == BRCMF_E_REASSOC_IND)) && (reason == BRCMF_E_STATUS_SUCCESS)) { @@ -4316,6 +4354,8 @@ brcmf_notify_connect_status(struct brcmf_if *ifp, } brcmf_link_down(ifp->vif); brcmf_init_prof(ndev_to_prof(ndev)); + if (ndev != cfg_to_ndev(cfg)) + complete(&cfg->vif_disabled); } else if (brcmf_is_nonetwork(cfg, e)) { if (brcmf_is_ibssmode(ifp->vif)) clear_bit(BRCMF_VIF_STATUS_CONNECTING, @@ -4401,7 +4441,6 @@ static s32 brcmf_notify_vif_event(struct brcmf_if *ifp, case BRCMF_E_IF_DEL: ifp->vif = NULL; - brcmf_free_vif(vif); mutex_unlock(&event->vif_event_lock); /* event may not be upon user request */ if (brcmf_cfg80211_vif_event_armed(cfg)) @@ -4507,7 +4546,7 @@ static s32 wl_init_priv(struct brcmf_cfg80211_info *cfg) mutex_init(&cfg->usr_sync); brcmf_init_escan(cfg); brcmf_init_conf(cfg->conf); - + init_completion(&cfg->vif_disabled); return err; } diff --git a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h index a996afa..5068188 100644 --- a/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h +++ b/drivers/net/wireless/brcm80211/brcmfmac/wl_cfg80211.h @@ -148,6 +148,7 @@ struct brcmf_cfg80211_profile { * @BRCMF_VIF_STATUS_READY: ready for operation. * @BRCMF_VIF_STATUS_CONNECTING: connect/join in progress. * @BRCMF_VIF_STATUS_CONNECTED: connected/joined succesfully. + * @BRCMF_VIF_STATUS_DISCONNECTING: disconnect/disable in progress. * @BRCMF_VIF_STATUS_AP_CREATING: interface configured for AP operation. * @BRCMF_VIF_STATUS_AP_CREATED: AP operation started. */ @@ -155,6 +156,7 @@ enum brcmf_vif_status { BRCMF_VIF_STATUS_READY, BRCMF_VIF_STATUS_CONNECTING, BRCMF_VIF_STATUS_CONNECTED, + BRCMF_VIF_STATUS_DISCONNECTING, BRCMF_VIF_STATUS_AP_CREATING, BRCMF_VIF_STATUS_AP_CREATED }; @@ -405,6 +407,7 @@ struct brcmf_cfg80211_info { struct list_head vif_list; u8 vif_cnt; struct brcmf_cfg80211_vif_event vif_event; + struct completion vif_disabled; }; /** @@ -479,6 +482,7 @@ void brcmf_free_vif(struct brcmf_cfg80211_vif *vif); s32 brcmf_vif_set_mgmt_ie(struct brcmf_cfg80211_vif *vif, s32 pktflag, const u8 *vndr_ie_buf, u32 vndr_ie_len); +s32 brcmf_vif_clear_mgmt_ies(struct brcmf_cfg80211_vif *vif); struct brcmf_tlv *brcmf_parse_tlvs(void *buf, int buflen, uint key); u16 channel_to_chanspec(struct ieee80211_channel *ch); u32 wl_get_vif_state_all(struct brcmf_cfg80211_info *cfg, unsigned long state);