From: Christophe Leroy Date: Wed, 7 Sep 2022 14:11:25 +0000 (+0200) Subject: spi: Add capability to perform some transfer with chipselect off X-Git-Tag: v6.1-rc5~19^2~49 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=5e0531f6b90ac096fedaf5bd0eae0bb4e5a39da5;p=platform%2Fkernel%2Flinux-starfive.git spi: Add capability to perform some transfer with chipselect off Some components require a few clock cycles with chipselect off before or/and after the data transfer done with CS on. Typically IDT 801034 QUAD PCM CODEC datasheet states "Note *: CCLK should have one cycle before CS goes low, and two cycles after CS goes high". The cycles "before" are implicitely provided by all previous activity on the SPI bus. But the cycles "after" must be provided in order to terminate the SPI transfer. In order to use that kind of component, add a cs_off flag to spi_transfer struct. When this flag is set, the transfer is performed with chipselect off. This allows consummer to add a dummy transfer at the end of the transfer list which is performed with chipselect OFF, providing the required additional clock cycles. Signed-off-by: Christophe Leroy Link: https://lore.kernel.org/r/434165c46f06d802690208a11e7ea2500e8da4c7.1662558898.git.christophe.leroy@csgroup.eu Signed-off-by: Mark Brown --- diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 97487e1..c582ae4 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -1435,7 +1435,8 @@ static int spi_transfer_one_message(struct spi_controller *ctlr, struct spi_statistics __percpu *statm = ctlr->pcpu_statistics; struct spi_statistics __percpu *stats = msg->spi->pcpu_statistics; - spi_set_cs(msg->spi, true, false); + xfer = list_first_entry(&msg->transfers, struct spi_transfer, transfer_list); + spi_set_cs(msg->spi, !xfer->cs_off, false); SPI_STATISTICS_INCREMENT_FIELD(statm, messages); SPI_STATISTICS_INCREMENT_FIELD(stats, messages); @@ -1503,10 +1504,15 @@ fallback_pio: &msg->transfers)) { keep_cs = true; } else { - spi_set_cs(msg->spi, false, false); + if (!xfer->cs_off) + spi_set_cs(msg->spi, false, false); _spi_transfer_cs_change_delay(msg, xfer); - spi_set_cs(msg->spi, true, false); + if (!list_next_entry(xfer, transfer_list)->cs_off) + spi_set_cs(msg->spi, true, false); } + } else if (!list_is_last(&xfer->transfer_list, &msg->transfers) && + xfer->cs_off != list_next_entry(xfer, transfer_list)->cs_off) { + spi_set_cs(msg->spi, xfer->cs_off, false); } msg->actual_length += xfer->len; diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h index e6c73d5..6e6c62c 100644 --- a/include/linux/spi/spi.h +++ b/include/linux/spi/spi.h @@ -847,6 +847,7 @@ struct spi_res { * for this transfer. If 0 the default (from @spi_device) is used. * @dummy_data: indicates transfer is dummy bytes transfer. * @cs_change: affects chipselect after this transfer completes + * @cs_off: performs the transfer with chipselect off. * @cs_change_delay: delay between cs deassert and assert when * @cs_change is set and @spi_transfer is not the last in @spi_message * @delay: delay to be introduced after this transfer before @@ -959,6 +960,7 @@ struct spi_transfer { unsigned cs_change:1; unsigned tx_nbits:3; unsigned rx_nbits:3; + unsigned cs_off:1; #define SPI_NBITS_SINGLE 0x01 /* 1bit transfer */ #define SPI_NBITS_DUAL 0x02 /* 2bits transfer */ #define SPI_NBITS_QUAD 0x04 /* 4bits transfer */