From: Christophe JAILLET Date: Sun, 14 May 2023 18:46:05 +0000 (+0200) Subject: thermal/drivers/sun8i: Fix some error handling paths in sun8i_ths_probe() X-Git-Tag: v6.1.39~537 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=5d56a8d670a57402b244b8e70373a9fa6080f333;p=platform%2Fkernel%2Flinux-starfive.git thermal/drivers/sun8i: Fix some error handling paths in sun8i_ths_probe() [ Upstream commit 89382022b370dfd34eaae9c863baa123fcd4d132 ] Should an error occur after calling sun8i_ths_resource_init() in the probe function, some resources need to be released, as already done in the .remove() function. Switch to the devm_clk_get_enabled() helper and add a new devm_action to turn sun8i_ths_resource_init() into a fully managed function. Move the place where reset_control_deassert() is called so that the recommended order of reset release/clock enable steps is kept. A64 manual states that: 3.3.6.4. Gating and reset Make sure that the reset signal has been released before the release of module clock gating; This fixes the issue and removes some LoC at the same time. Fixes: dccc5c3b6f30 ("thermal/drivers/sun8i: Add thermal driver for H6/H5/H3/A64/A83T/R40") Signed-off-by: Christophe JAILLET Acked-by: Maxime Ripard Signed-off-by: Daniel Lezcano Link: https://lore.kernel.org/r/a8ae84bd2dc4b55fe428f8e20f31438bf8bb6762.1684089931.git.christophe.jaillet@wanadoo.fr Signed-off-by: Sasha Levin --- diff --git a/drivers/thermal/sun8i_thermal.c b/drivers/thermal/sun8i_thermal.c index e64d06d..80614b6 100644 --- a/drivers/thermal/sun8i_thermal.c +++ b/drivers/thermal/sun8i_thermal.c @@ -319,6 +319,11 @@ out: return ret; } +static void sun8i_ths_reset_control_assert(void *data) +{ + reset_control_assert(data); +} + static int sun8i_ths_resource_init(struct ths_device *tmdev) { struct device *dev = tmdev->dev; @@ -339,47 +344,35 @@ static int sun8i_ths_resource_init(struct ths_device *tmdev) if (IS_ERR(tmdev->reset)) return PTR_ERR(tmdev->reset); - tmdev->bus_clk = devm_clk_get(&pdev->dev, "bus"); + ret = reset_control_deassert(tmdev->reset); + if (ret) + return ret; + + ret = devm_add_action_or_reset(dev, sun8i_ths_reset_control_assert, + tmdev->reset); + if (ret) + return ret; + + tmdev->bus_clk = devm_clk_get_enabled(&pdev->dev, "bus"); if (IS_ERR(tmdev->bus_clk)) return PTR_ERR(tmdev->bus_clk); } if (tmdev->chip->has_mod_clk) { - tmdev->mod_clk = devm_clk_get(&pdev->dev, "mod"); + tmdev->mod_clk = devm_clk_get_enabled(&pdev->dev, "mod"); if (IS_ERR(tmdev->mod_clk)) return PTR_ERR(tmdev->mod_clk); } - ret = reset_control_deassert(tmdev->reset); - if (ret) - return ret; - - ret = clk_prepare_enable(tmdev->bus_clk); - if (ret) - goto assert_reset; - ret = clk_set_rate(tmdev->mod_clk, 24000000); if (ret) - goto bus_disable; - - ret = clk_prepare_enable(tmdev->mod_clk); - if (ret) - goto bus_disable; + return ret; ret = sun8i_ths_calibrate(tmdev); if (ret) - goto mod_disable; + return ret; return 0; - -mod_disable: - clk_disable_unprepare(tmdev->mod_clk); -bus_disable: - clk_disable_unprepare(tmdev->bus_clk); -assert_reset: - reset_control_assert(tmdev->reset); - - return ret; } static int sun8i_h3_thermal_init(struct ths_device *tmdev) @@ -530,17 +523,6 @@ static int sun8i_ths_probe(struct platform_device *pdev) return 0; } -static int sun8i_ths_remove(struct platform_device *pdev) -{ - struct ths_device *tmdev = platform_get_drvdata(pdev); - - clk_disable_unprepare(tmdev->mod_clk); - clk_disable_unprepare(tmdev->bus_clk); - reset_control_assert(tmdev->reset); - - return 0; -} - static const struct ths_thermal_chip sun8i_a83t_ths = { .sensor_num = 3, .scale = 705, @@ -642,7 +624,6 @@ MODULE_DEVICE_TABLE(of, of_ths_match); static struct platform_driver ths_driver = { .probe = sun8i_ths_probe, - .remove = sun8i_ths_remove, .driver = { .name = "sun8i-thermal", .of_match_table = of_ths_match,