From: Wolfgang Denk <wd@denx.de>
Date: Wed, 3 Feb 2010 19:05:27 +0000 (+0100)
Subject: Merge branch 'master' of git://git.denx.de/u-boot-nand-flash
X-Git-Tag: v2010.03-rc1~96
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=5c1a1a3069c194ac6509344e58f8c96779d2d197;hp=0ae016f1ff6b06e94db52373efd08d106bfcecdf;p=platform%2Fkernel%2Fu-boot.git

Merge branch 'master' of git://git.denx.de/u-boot-nand-flash
---

diff --git a/MAKEALL b/MAKEALL
index 7047e46..684db67 100755
--- a/MAKEALL
+++ b/MAKEALL
@@ -403,6 +403,7 @@ LIST_85xx="		\
 	MPC8568MDS	\
 	MPC8569MDS	\
 	MPC8569MDS_ATM	\
+	MPC8569MDS_NAND \
 	MPC8572DS	\
 	MPC8572DS_36BIT	\
 	P2020DS		\
diff --git a/Makefile b/Makefile
index 62fa1df..e4431f7 100644
--- a/Makefile
+++ b/Makefile
@@ -2487,6 +2487,7 @@ MPC8568MDS_config:	unconfig
 	@$(MKCONFIG) $(@:_config=) ppc mpc85xx mpc8568mds freescale
 
 MPC8569MDS_ATM_config \
+MPC8569MDS_NAND_config \
 MPC8569MDS_config:	unconfig
 	@$(MKCONFIG) -t $(@:_config=) MPC8569MDS ppc mpc85xx mpc8569mds freescale
 
diff --git a/board/freescale/mpc8569mds/config.mk b/board/freescale/mpc8569mds/config.mk
index 962f79b..7de0f7c 100644
--- a/board/freescale/mpc8569mds/config.mk
+++ b/board/freescale/mpc8569mds/config.mk
@@ -23,4 +23,13 @@
 #
 # mpc8569mds board
 #
+ifndef NAND_SPL
+ifeq ($(CONFIG_MK_NAND), y)
+TEXT_BASE = $(CONFIG_RAMBOOT_TEXT_BASE)
+LDSCRIPT := $(TOPDIR)/cpu/$(CPU)/u-boot-nand.lds
+endif
+endif
+
+ifndef TEXT_BASE
 TEXT_BASE = 0xfff80000
+endif
diff --git a/board/freescale/mpc8569mds/tlb.c b/board/freescale/mpc8569mds/tlb.c
index 3b8ee05..73dcc3e 100644
--- a/board/freescale/mpc8569mds/tlb.c
+++ b/board/freescale/mpc8569mds/tlb.c
@@ -90,6 +90,17 @@ struct fsl_e_tlb_entry tlb_table[] = {
 	SET_TLB_ENTRY(1, CONFIG_SYS_CCSRBAR, CONFIG_SYS_CCSRBAR_PHYS,
 		      MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
 		      0, 4, BOOKE_PAGESZ_64M, 1),
+
+#if defined(CONFIG_SYS_RAMBOOT) && defined(CONFIG_SYS_INIT_L2_ADDR)
+	/* *I*G - L2SRAM */
+	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR, CONFIG_SYS_INIT_L2_ADDR_PHYS,
+			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+			0, 5, BOOKE_PAGESZ_256K, 1),
+	SET_TLB_ENTRY(1, CONFIG_SYS_INIT_L2_ADDR + 0x40000,
+			CONFIG_SYS_INIT_L2_ADDR_PHYS + 0x40000,
+			MAS3_SX|MAS3_SW|MAS3_SR, MAS2_I|MAS2_G,
+			0, 6, BOOKE_PAGESZ_256K, 1),
+#endif
 };
 
 int num_tlb_entries = ARRAY_SIZE(tlb_table);
diff --git a/common/env_nand.c b/common/env_nand.c
index ca631af..a15a950 100644
--- a/common/env_nand.c
+++ b/common/env_nand.c
@@ -298,6 +298,13 @@ void env_relocate_spec (void)
 	tmp_env1 = (env_t *) malloc(CONFIG_ENV_SIZE);
 	tmp_env2 = (env_t *) malloc(CONFIG_ENV_SIZE);
 
+	if ((tmp_env1 == NULL) || (tmp_env2 == NULL)) {
+		puts("Can't allocate buffers for environment\n");
+		free (tmp_env1);
+		free (tmp_env2);
+		return use_default();
+	}
+
 	if (readenv(CONFIG_ENV_OFFSET, (u_char *) tmp_env1))
 		puts("No Valid Environment Area Found\n");
 	if (readenv(CONFIG_ENV_OFFSET_REDUND, (u_char *) tmp_env2))
diff --git a/cpu/arm926ejs/start.S b/cpu/arm926ejs/start.S
index 4421b6a..3b81151 100644
--- a/cpu/arm926ejs/start.S
+++ b/cpu/arm926ejs/start.S
@@ -53,6 +53,27 @@
 .globl _start
 _start:
 	b	reset
+#ifdef CONFIG_PRELOADER
+/* No exception handlers in preloader */
+	ldr	pc, _hang
+	ldr	pc, _hang
+	ldr	pc, _hang
+	ldr	pc, _hang
+	ldr	pc, _hang
+	ldr	pc, _hang
+	ldr	pc, _hang
+
+_hang:
+	.word	do_hang
+/* pad to 64 byte boundary */
+	.word	0x12345678
+	.word	0x12345678
+	.word	0x12345678
+	.word	0x12345678
+	.word	0x12345678
+	.word	0x12345678
+	.word	0x12345678
+#else
 	ldr	pc, _undefined_instruction
 	ldr	pc, _software_interrupt
 	ldr	pc, _prefetch_abort
@@ -76,6 +97,7 @@ _irq:
 _fiq:
 	.word fiq
 
+#endif	/* CONFIG_PRELOADER */
 	.balignl 16,0xdeadbeef
 
 
@@ -150,7 +172,6 @@ relocate:				/* relocate U-Boot to RAM	    */
 	ldr	r1, _TEXT_BASE		/* test if we run from flash or RAM */
 	cmp     r0, r1                  /* don't reloc during debug         */
 	beq     stack_setup
-
 	ldr	r2, _armboot_start
 	ldr	r3, _bss_start
 	sub	r2, r3, r2		/* r2 <- size of armboot            */
@@ -166,11 +187,14 @@ copy_loop:
 	/* Set up the stack						    */
 stack_setup:
 	ldr	r0, _TEXT_BASE		/* upper 128 KiB: relocated uboot   */
+	sub	sp, r0, #128		/* leave 32 words for abort-stack   */
+#ifndef CONFIG_PRELOADER
 	sub	r0, r0, #CONFIG_SYS_MALLOC_LEN	/* malloc area                      */
 	sub	r0, r0, #CONFIG_SYS_GBL_DATA_SIZE /* bdinfo                        */
 #ifdef CONFIG_USE_IRQ
 	sub	r0, r0, #(CONFIG_STACKSIZE_IRQ+CONFIG_STACKSIZE_FIQ)
 #endif
+#endif /* CONFIG_PRELOADER */
 	sub	sp, r0, #12		/* leave 3 words for abort-stack    */
 	bic	sp, r0, #7		/* 8-byte align stack for ABI compliance */
 
@@ -179,6 +203,7 @@ clear_bss:
 	ldr	r1, _bss_end		/* stop here                        */
 	mov	r2, #0x00000000		/* clear                            */
 
+#ifndef CONFIG_PRELOADER
 clbss_l:str	r2, [r0]		/* clear loop...                    */
 	add	r0, r0, #4
 	cmp	r0, r1
@@ -186,11 +211,16 @@ clbss_l:str	r2, [r0]		/* clear loop...                    */
 
 	bl coloured_LED_init
 	bl red_LED_on
+#endif /* CONFIG_PRELOADER */
 
 	ldr	pc, _start_armboot
 
 _start_armboot:
+#ifdef CONFIG_NAND_SPL
+	.word nand_boot
+#else
 	.word start_armboot
+#endif /* CONFIG_NAND_SPL */
 
 
 /*
@@ -231,6 +261,7 @@ cpu_init_crit:
 	mov	pc, lr		/* back to my caller */
 #endif /* CONFIG_SKIP_LOWLEVEL_INIT */
 
+#ifndef CONFIG_PRELOADER
 /*
  *************************************************************************
  *
@@ -332,10 +363,18 @@ cpu_init_crit:
 	.macro get_fiq_stack			@ setup FIQ stack
 	ldr	sp, FIQ_STACK_START
 	.endm
+#endif	/* CONFIG_PRELOADER */
 
 /*
  * exception handlers
  */
+#ifdef CONFIG_PRELOADER
+	.align	5
+do_hang:
+	ldr	sp, _TEXT_BASE			/* switch to abort stack */
+1:
+	bl	1b				/* hang and never return */
+#else	/* !CONFIG_PRELOADER */
 	.align  5
 undefined_instruction:
 	get_bad_stack
@@ -398,3 +437,4 @@ fiq:
 	bl	do_fiq
 
 #endif
+#endif	/* CONFIG_PRELOADER */
diff --git a/drivers/mtd/nand/mxc_nand.c b/drivers/mtd/nand/mxc_nand.c
index b2b612e..9633858 100644
--- a/drivers/mtd/nand/mxc_nand.c
+++ b/drivers/mtd/nand/mxc_nand.c
@@ -22,27 +22,65 @@
 #include <nand.h>
 #include <linux/err.h>
 #include <asm/io.h>
-#ifdef CONFIG_MX27
+#if defined(CONFIG_MX27) || defined(CONFIG_MX25) 
 #include <asm/arch/imx-regs.h>
 #endif
 
 #define DRIVER_NAME "mxc_nand"
 
+/*
+ * TODO: Use same register defs here as nand_spl mxc nand driver.
+ */
+/*
+ * Register map and bit definitions for the Freescale NAND Flash Controller
+ * present in various i.MX devices.
+ *
+ * MX31 and MX27 have version 1 which has
+ * 	4 512 byte main buffers and
+ * 	4 16 byte spare buffers
+ * 	to support up to 2K byte pagesize nand.
+ * 	Reading or writing a 2K page requires 4 FDI/FDO cycles.
+ *
+ * MX25 has version 1.1 which has
+ * 	8 512 byte main buffers and
+ * 	8 64 byte spare buffers
+ * 	to support up to 4K byte pagesize nand.
+ * 	Reading or writing a 2K or 4K page requires only 1 FDI/FDO cycle.
+ *      Also some of registers are moved and/or changed meaning as seen below.
+ */
+#if defined(CONFIG_MX31) || defined(CONFIG_MX27)
+#define MXC_NFC_V1
+#elif defined(CONFIG_MX25)
+#define MXC_NFC_V1_1
+#else
+#warning "MXC NFC version not defined"
+#endif
+
+#if defined(MXC_NFC_V1)
+#define NAND_MXC_NR_BUFS		4
+#define NAND_MXC_SPARE_BUF_SIZE		16
+#define NAND_MXC_REG_OFFSET		0xe00
+#define is_mxc_nfc_11() 		0
+#elif defined(MXC_NFC_V1_1)
+#define NAND_MXC_NR_BUFS		8
+#define NAND_MXC_SPARE_BUF_SIZE		64
+#define NAND_MXC_REG_OFFSET		0x1e00
+#define is_mxc_nfc_11() 		1
+#else
+#error "define CONFIG_NAND_MXC_VXXX to use mtd mxc nand driver"
+#endif
 struct nfc_regs {
-/* NFC RAM BUFFER Main area 0 */
-	uint8_t main_area0[0x200];
-	uint8_t main_area1[0x200];
-	uint8_t main_area2[0x200];
-	uint8_t main_area3[0x200];
-/* SPARE BUFFER Spare area 0 */
-	uint8_t spare_area0[0x10];
-	uint8_t spare_area1[0x10];
-	uint8_t spare_area2[0x10];
-	uint8_t spare_area3[0x10];
-	uint8_t pad[0x5c0];
-/* NFC registers */
+	uint8_t main_area[NAND_MXC_NR_BUFS][0x200];
+	uint8_t spare_area[NAND_MXC_NR_BUFS][NAND_MXC_SPARE_BUF_SIZE];
+	/*
+	 * reserved size is offset of nfc registers
+	 * minus total main and spare sizes
+	 */
+	uint8_t reserved1[NAND_MXC_REG_OFFSET
+		- NAND_MXC_NR_BUFS * (512 + NAND_MXC_SPARE_BUF_SIZE)];
+#if defined(MXC_NFC_V1)
 	uint16_t nfc_buf_size;
-	uint16_t reserved;
+	uint16_t reserved2;
 	uint16_t nfc_buf_addr;
 	uint16_t nfc_flash_addr;
 	uint16_t nfc_flash_cmd;
@@ -56,6 +94,30 @@ struct nfc_regs {
 	uint16_t nfc_nf_wrprst;
 	uint16_t nfc_config1;
 	uint16_t nfc_config2;
+#elif defined(MXC_NFC_V1_1)
+	uint16_t reserved2[2];
+	uint16_t nfc_buf_addr;
+	uint16_t nfc_flash_addr;
+	uint16_t nfc_flash_cmd;
+	uint16_t nfc_config;
+	uint16_t nfc_ecc_status_result;
+	uint16_t nfc_ecc_status_result2;
+	uint16_t nfc_spare_area_size;
+	uint16_t nfc_wrprot;
+	uint16_t reserved3[2];
+	uint16_t nfc_nf_wrprst;
+	uint16_t nfc_config1;
+	uint16_t nfc_config2;
+	uint16_t reserved4;
+	uint16_t nfc_unlockstart_blkaddr;
+	uint16_t nfc_unlockend_blkaddr;
+	uint16_t nfc_unlockstart_blkaddr1;
+	uint16_t nfc_unlockend_blkaddr1;
+	uint16_t nfc_unlockstart_blkaddr2;
+	uint16_t nfc_unlockend_blkaddr2;
+	uint16_t nfc_unlockstart_blkaddr3;
+	uint16_t nfc_unlockend_blkaddr3;
+#endif
 };
 
 /*
@@ -100,6 +162,11 @@ struct nfc_regs {
  */
 #define NFC_INT            0x8000
 
+#ifdef MXC_NFC_V1_1
+#define NFC_4_8N_ECC	(1 << 0)
+#else
+#define NFC_4_8N_ECC	0
+#endif
 #define NFC_SP_EN           (1 << 2)
 #define NFC_ECC_EN          (1 << 3)
 #define NFC_BIG             (1 << 5)
@@ -119,6 +186,7 @@ struct mxc_nand_host {
 	int			pagesize_2k;
 	int			clk_act;
 	uint16_t		col_addr;
+	unsigned int		page_addr;
 };
 
 static struct mxc_nand_host mxc_host;
@@ -135,26 +203,45 @@ static struct mxc_nand_host *host = &mxc_host;
 #define SPARE_SINGLEBIT_ERROR 0x1
 
 /* OOB placement block for use with hardware ecc generation */
-#ifdef CONFIG_MXC_NAND_HWECC
+#if defined(MXC_NFC_V1)
+#ifndef CONFIG_SYS_NAND_LARGEPAGE
 static struct nand_ecclayout nand_hw_eccoob = {
 	.eccbytes = 5,
 	.eccpos = {6, 7, 8, 9, 10},
-	.oobfree = {{0, 5}, {11, 5}, }
+	.oobfree = { {0, 5}, {11, 5}, }
 };
 #else
-static struct nand_ecclayout nand_soft_eccoob = {
-	.eccbytes = 6,
-	.eccpos = {6, 7, 8, 9, 10, 11},
-	.oobfree = {{0, 5}, {12, 4}, }
+static struct nand_ecclayout nand_hw_eccoob2k = {
+	.eccbytes = 20,
+	.eccpos = {
+		6, 7, 8, 9, 10,
+		22, 23, 24, 25, 26,
+		38, 39, 40, 41, 42,
+		54, 55, 56, 57, 58,
+	},
+	.oobfree = { {2, 4}, {11, 11}, {27, 11}, {43, 11}, {59, 5} },
 };
 #endif
-
-static struct nand_ecclayout nand_hw_eccoob_largepage = {
-	.eccbytes = 20,
-	.eccpos = {6, 7, 8, 9, 10, 22, 23, 24, 25, 26,
-		   38, 39, 40, 41, 42, 54, 55, 56, 57, 58},
-	.oobfree = {{2, 4}, {11, 10}, {27, 10}, {43, 10}, {59, 5}, }
+#elif defined(MXC_NFC_V1_1)
+#ifndef CONFIG_SYS_NAND_LARGEPAGE
+static struct nand_ecclayout nand_hw_eccoob = {
+	.eccbytes = 9,
+	.eccpos = {7, 8, 9, 10, 11, 12, 13, 14, 15},
+	.oobfree = { {2, 5} }
 };
+#else
+static struct nand_ecclayout nand_hw_eccoob2k = {
+	.eccbytes = 36,
+	.eccpos = {
+		7, 8, 9, 10, 11, 12, 13, 14, 15,
+		23, 24, 25, 26, 27, 28, 29, 30, 31,
+		39, 40, 41, 42, 43, 44, 45, 46, 47,
+		55, 56, 57, 58, 59, 60, 61, 62, 63,
+	},
+	.oobfree = { {2, 5}, {16, 7}, {32, 7}, {48, 7} },
+};
+#endif
+#endif
 
 #ifdef CONFIG_MX27
 static int is_16bit_nand(void)
@@ -178,6 +265,17 @@ static int is_16bit_nand(void)
 	else
 		return 0;
 }
+#elif defined(CONFIG_MX25)
+static int is_16bit_nand(void)
+{
+	struct ccm_regs *ccm =
+		(struct ccm_regs *)IMX_CCM_BASE;
+
+	if (readl(&ccm->rcsr) & CCM_RCSR_NF_16BIT_SEL)
+		return 1;
+	else
+		return 0;
+}
 #else
 #warning "8/16 bit NAND autodetection not supported"
 static int is_16bit_nand(void)
@@ -258,7 +356,24 @@ static void send_addr(struct mxc_nand_host *host, uint16_t addr)
 static void send_prog_page(struct mxc_nand_host *host, uint8_t buf_id,
 			int spare_only)
 {
-	MTDDEBUG(MTD_DEBUG_LEVEL3, "send_prog_page (%d)\n", spare_only);
+	if (spare_only)
+		MTDDEBUG(MTD_DEBUG_LEVEL1, "send_prog_page (%d)\n", spare_only);
+
+	if (is_mxc_nfc_11()) {
+		int i;
+		/*
+		 *  The controller copies the 64 bytes of spare data from
+		 *  the first 16 bytes of each of the 4 64 byte spare buffers.
+		 *  Copy the contiguous data starting in spare_area[0] to
+		 *  the four spare area buffers.
+		 */
+		for (i = 1; i < 4; i++) {
+			void __iomem *src = &host->regs->spare_area[0][i * 16];
+			void __iomem *dst = &host->regs->spare_area[i][0];
+
+			mxc_nand_memcpy32(dst, src, 16);
+		}
+	}
 
 	writew(buf_id, &host->regs->nfc_buf_addr);
 
@@ -303,6 +418,22 @@ static void send_read_page(struct mxc_nand_host *host, uint8_t buf_id,
 
 	/* Wait for operation to complete */
 	wait_op_done(host, TROP_US_DELAY, spare_only);
+
+	if (is_mxc_nfc_11()) {
+		int i;
+
+		/*
+		 *  The controller copies the 64 bytes of spare data to
+		 *  the first 16 bytes of each of the 4 spare buffers.
+		 *  Make the data contiguous starting in spare_area[0].
+		 */
+		for (i = 1; i < 4; i++) {
+			void __iomem *src = &host->regs->spare_area[i][0];
+			void __iomem *dst = &host->regs->spare_area[0][i * 16];
+
+			mxc_nand_memcpy32(dst, src, 16);
+		}
+	}
 }
 
 /* Request the NANDFC to perform a read of the NAND device ID. */
@@ -330,7 +461,7 @@ static void send_read_id(struct mxc_nand_host *host)
  */
 static uint16_t get_dev_status(struct mxc_nand_host *host)
 {
-	void __iomem *main_buf = host->regs->main_area1;
+	void __iomem *main_buf = host->regs->main_area[1];
 	uint32_t store;
 	uint16_t ret, tmp;
 	/* Issue status request to NAND device */
@@ -379,6 +510,330 @@ static void mxc_nand_enable_hwecc(struct mtd_info *mtd, int mode)
 	 */
 }
 
+#ifdef MXC_NFC_V1_1
+static void _mxc_nand_enable_hwecc(struct mtd_info *mtd, int on)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct mxc_nand_host *host = nand_chip->priv;
+	uint16_t tmp = readw(&host->regs->nfc_config1);
+
+	if (on)
+		tmp |= NFC_ECC_EN;
+	else
+		tmp &= ~NFC_ECC_EN;
+	writew(tmp, &host->regs->nfc_config1);
+}
+
+static int mxc_nand_read_oob_syndrome(struct mtd_info *mtd,
+				      struct nand_chip *chip,
+				      int page, int sndcmd)
+{
+	struct mxc_nand_host *host = chip->priv;
+	uint8_t *buf = chip->oob_poi;
+	int length = mtd->oobsize;
+	int eccpitch = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
+	uint8_t *bufpoi = buf;
+	int i, toread;
+
+	MTDDEBUG(MTD_DEBUG_LEVEL0,
+			"%s: Reading OOB area of page %u to oob %p\n",
+			 __FUNCTION__, host->page_addr, buf);
+
+	chip->cmdfunc(mtd, NAND_CMD_READOOB, mtd->writesize, page);
+	for (i = 0; i < chip->ecc.steps; i++) {
+		toread = min_t(int, length, chip->ecc.prepad);
+		if (toread) {
+			chip->read_buf(mtd, bufpoi, toread);
+			bufpoi += toread;
+			length -= toread;
+		}
+		bufpoi += chip->ecc.bytes;
+		host->col_addr += chip->ecc.bytes;
+		length -= chip->ecc.bytes;
+
+		toread = min_t(int, length, chip->ecc.postpad);
+		if (toread) {
+			chip->read_buf(mtd, bufpoi, toread);
+			bufpoi += toread;
+			length -= toread;
+		}
+	}
+	if (length > 0)
+		chip->read_buf(mtd, bufpoi, length);
+
+	_mxc_nand_enable_hwecc(mtd, 0);
+	chip->cmdfunc(mtd, NAND_CMD_READOOB,
+			mtd->writesize + chip->ecc.prepad, page);
+	bufpoi = buf + chip->ecc.prepad;
+	length = mtd->oobsize - chip->ecc.prepad;
+	for (i = 0; i < chip->ecc.steps; i++) {
+		toread = min_t(int, length, chip->ecc.bytes);
+		chip->read_buf(mtd, bufpoi, toread);
+		bufpoi += eccpitch;
+		length -= eccpitch;
+		host->col_addr += chip->ecc.postpad + chip->ecc.prepad;
+	}
+	_mxc_nand_enable_hwecc(mtd, 1);
+	return 1;
+}
+
+static int mxc_nand_read_page_raw_syndrome(struct mtd_info *mtd,
+					   struct nand_chip *chip,
+					   uint8_t *buf,
+					   int page)
+{
+	struct mxc_nand_host *host = chip->priv;
+	int eccsize = chip->ecc.size;
+	int eccbytes = chip->ecc.bytes;
+	int eccpitch = eccbytes + chip->ecc.prepad + chip->ecc.postpad;
+	uint8_t *oob = chip->oob_poi;
+	int steps, size;
+	int n;
+
+	_mxc_nand_enable_hwecc(mtd, 0);
+	chip->cmdfunc(mtd, NAND_CMD_READ0, 0x00, host->page_addr);
+
+	for (n = 0, steps = chip->ecc.steps; steps > 0; n++, steps--) {
+		host->col_addr = n * eccsize;
+		chip->read_buf(mtd, buf, eccsize);
+		buf += eccsize;
+
+		host->col_addr = mtd->writesize + n * eccpitch;
+		if (chip->ecc.prepad) {
+			chip->read_buf(mtd, oob, chip->ecc.prepad);
+			oob += chip->ecc.prepad;
+		}
+
+		chip->read_buf(mtd, oob, eccbytes);
+		oob += eccbytes;
+
+		if (chip->ecc.postpad) {
+			chip->read_buf(mtd, oob, chip->ecc.postpad);
+			oob += chip->ecc.postpad;
+		}
+	}
+
+	size = mtd->oobsize - (oob - chip->oob_poi);
+	if (size)
+		chip->read_buf(mtd, oob, size);
+	_mxc_nand_enable_hwecc(mtd, 0);
+
+	return 0;
+}
+
+static int mxc_nand_read_page_syndrome(struct mtd_info *mtd,
+				       struct nand_chip *chip,
+				       uint8_t *buf,
+				       int page)
+{
+	struct mxc_nand_host *host = chip->priv;
+	int n, eccsize = chip->ecc.size;
+	int eccbytes = chip->ecc.bytes;
+	int eccpitch = eccbytes + chip->ecc.prepad + chip->ecc.postpad;
+	int eccsteps = chip->ecc.steps;
+	uint8_t *p = buf;
+	uint8_t *oob = chip->oob_poi;
+
+	MTDDEBUG(MTD_DEBUG_LEVEL1, "Reading page %u to buf %p oob %p\n",
+	      host->page_addr, buf, oob);
+
+	/* first read out the data area and the available portion of OOB */
+	for (n = 0; eccsteps; n++, eccsteps--, p += eccsize) {
+		int stat;
+
+		host->col_addr = n * eccsize;
+
+		chip->read_buf(mtd, p, eccsize);
+
+		host->col_addr = mtd->writesize + n * eccpitch;
+
+		if (chip->ecc.prepad) {
+			chip->read_buf(mtd, oob, chip->ecc.prepad);
+			oob += chip->ecc.prepad;
+		}
+
+		stat = chip->ecc.correct(mtd, p, oob, NULL);
+
+		if (stat < 0)
+			mtd->ecc_stats.failed++;
+		else
+			mtd->ecc_stats.corrected += stat;
+		oob += eccbytes;
+
+		if (chip->ecc.postpad) {
+			chip->read_buf(mtd, oob, chip->ecc.postpad);
+			oob += chip->ecc.postpad;
+		}
+	}
+
+	/* Calculate remaining oob bytes */
+	n = mtd->oobsize - (oob - chip->oob_poi);
+	if (n)
+		chip->read_buf(mtd, oob, n);
+
+	/* Then switch ECC off and read the OOB area to get the ECC code */
+	_mxc_nand_enable_hwecc(mtd, 0);
+	chip->cmdfunc(mtd, NAND_CMD_READOOB, mtd->writesize, host->page_addr);
+	eccsteps = chip->ecc.steps;
+	oob = chip->oob_poi + chip->ecc.prepad;
+	for (n = 0; eccsteps; n++, eccsteps--, p += eccsize) {
+		host->col_addr = mtd->writesize +
+				 n * eccpitch +
+				 chip->ecc.prepad;
+		chip->read_buf(mtd, oob, eccbytes);
+		oob += eccbytes + chip->ecc.postpad;
+	}
+	_mxc_nand_enable_hwecc(mtd, 1);
+	return 0;
+}
+
+static int mxc_nand_write_oob_syndrome(struct mtd_info *mtd,
+				       struct nand_chip *chip, int page)
+{
+	struct mxc_nand_host *host = chip->priv;
+	int eccpitch = chip->ecc.bytes + chip->ecc.prepad + chip->ecc.postpad;
+	int length = mtd->oobsize;
+	int i, len, status, steps = chip->ecc.steps;
+	const uint8_t *bufpoi = chip->oob_poi;
+
+	chip->cmdfunc(mtd, NAND_CMD_SEQIN, mtd->writesize, page);
+	for (i = 0; i < steps; i++) {
+		len = min_t(int, length, eccpitch);
+
+		chip->write_buf(mtd, bufpoi, len);
+		bufpoi += len;
+		length -= len;
+		host->col_addr += chip->ecc.prepad + chip->ecc.postpad;
+	}
+	if (length > 0)
+		chip->write_buf(mtd, bufpoi, length);
+
+	chip->cmdfunc(mtd, NAND_CMD_PAGEPROG, -1, -1);
+	status = chip->waitfunc(mtd, chip);
+	return status & NAND_STATUS_FAIL ? -EIO : 0;
+}
+
+static void mxc_nand_write_page_raw_syndrome(struct mtd_info *mtd,
+					     struct nand_chip *chip,
+					     const uint8_t *buf)
+{
+	struct mxc_nand_host *host = chip->priv;
+	int eccsize = chip->ecc.size;
+	int eccbytes = chip->ecc.bytes;
+	int eccpitch = eccbytes + chip->ecc.prepad + chip->ecc.postpad;
+	uint8_t *oob = chip->oob_poi;
+	int steps, size;
+	int n;
+
+	for (n = 0, steps = chip->ecc.steps; steps > 0; n++, steps--) {
+		host->col_addr = n * eccsize;
+		chip->write_buf(mtd, buf, eccsize);
+		buf += eccsize;
+
+		host->col_addr = mtd->writesize + n * eccpitch;
+
+		if (chip->ecc.prepad) {
+			chip->write_buf(mtd, oob, chip->ecc.prepad);
+			oob += chip->ecc.prepad;
+		}
+
+		host->col_addr += eccbytes;
+		oob += eccbytes;
+
+		if (chip->ecc.postpad) {
+			chip->write_buf(mtd, oob, chip->ecc.postpad);
+			oob += chip->ecc.postpad;
+		}
+	}
+
+	size = mtd->oobsize - (oob - chip->oob_poi);
+	if (size)
+		chip->write_buf(mtd, oob, size);
+}
+
+static void mxc_nand_write_page_syndrome(struct mtd_info *mtd,
+					 struct nand_chip *chip,
+					 const uint8_t *buf)
+{
+	struct mxc_nand_host *host = chip->priv;
+	int i, n, eccsize = chip->ecc.size;
+	int eccbytes = chip->ecc.bytes;
+	int eccpitch = eccbytes + chip->ecc.prepad + chip->ecc.postpad;
+	int eccsteps = chip->ecc.steps;
+	const uint8_t *p = buf;
+	uint8_t *oob = chip->oob_poi;
+
+	chip->ecc.hwctl(mtd, NAND_ECC_WRITE);
+
+	for (i = n = 0;
+	     eccsteps;
+	     n++, eccsteps--, i += eccbytes, p += eccsize) {
+		host->col_addr = n * eccsize;
+
+		chip->write_buf(mtd, p, eccsize);
+
+		host->col_addr = mtd->writesize + n * eccpitch;
+
+		if (chip->ecc.prepad) {
+			chip->write_buf(mtd, oob, chip->ecc.prepad);
+			oob += chip->ecc.prepad;
+		}
+
+		chip->write_buf(mtd, oob, eccbytes);
+		oob += eccbytes;
+
+		if (chip->ecc.postpad) {
+			chip->write_buf(mtd, oob, chip->ecc.postpad);
+			oob += chip->ecc.postpad;
+		}
+	}
+
+	/* Calculate remaining oob bytes */
+	i = mtd->oobsize - (oob - chip->oob_poi);
+	if (i)
+		chip->write_buf(mtd, oob, i);
+}
+
+static int mxc_nand_correct_data(struct mtd_info *mtd, u_char *dat,
+				 u_char *read_ecc, u_char *calc_ecc)
+{
+	struct nand_chip *nand_chip = mtd->priv;
+	struct mxc_nand_host *host = nand_chip->priv;
+	uint16_t ecc_status = readw(&host->regs->nfc_ecc_status_result);
+	int subpages = mtd->writesize / nand_chip->subpagesize;
+	int pg2blk_shift = nand_chip->phys_erase_shift -
+			   nand_chip->page_shift;
+
+	do {
+		if ((ecc_status & 0xf) > 4) {
+			static int last_bad = -1;
+
+			if (last_bad != host->page_addr >> pg2blk_shift) {
+				last_bad = host->page_addr >> pg2blk_shift;
+				printk(KERN_DEBUG
+				       "MXC_NAND: HWECC uncorrectable ECC error"
+				       " in block %u page %u subpage %d\n",
+				       last_bad, host->page_addr,
+				       mtd->writesize / nand_chip->subpagesize
+					    - subpages);
+			}
+			return -1;
+		}
+		ecc_status >>= 4;
+		subpages--;
+	} while (subpages > 0);
+
+	return 0;
+}
+#else
+#define mxc_nand_read_page_syndrome NULL
+#define mxc_nand_read_page_raw_syndrome NULL
+#define mxc_nand_read_oob_syndrome NULL
+#define mxc_nand_write_page_syndrome NULL
+#define mxc_nand_write_page_raw_syndrome NULL
+#define mxc_nand_write_oob_syndrome NULL
+#define mxc_nfc_11_nand_correct_data NULL
+
 static int mxc_nand_correct_data(struct mtd_info *mtd, u_char *dat,
 				 u_char *read_ecc, u_char *calc_ecc)
 {
@@ -400,6 +855,9 @@ static int mxc_nand_correct_data(struct mtd_info *mtd, u_char *dat,
 
 	return 0;
 }
+#endif
+
+
 
 static int mxc_nand_calculate_ecc(struct mtd_info *mtd, const u_char *dat,
 				  u_char *ecc_code)
@@ -415,9 +873,9 @@ static u_char mxc_nand_read_byte(struct mtd_info *mtd)
 	uint8_t ret = 0;
 	uint16_t col;
 	uint16_t __iomem *main_buf =
-		(uint16_t __iomem *)host->regs->main_area0;
+		(uint16_t __iomem *)host->regs->main_area[0];
 	uint16_t __iomem *spare_buf =
-		(uint16_t __iomem *)host->regs->spare_area0;
+		(uint16_t __iomem *)host->regs->spare_area[0];
 	union {
 		uint16_t word;
 		uint8_t bytes[2];
@@ -464,9 +922,10 @@ static uint16_t mxc_nand_read_word(struct mtd_info *mtd)
 		col += mtd->writesize;
 
 	if (col < mtd->writesize) {
-		p = (uint16_t __iomem *)(host->regs->main_area0 + (col >> 1));
+		p = (uint16_t __iomem *)(host->regs->main_area[0] +
+				(col >> 1));
 	} else {
-		p = (uint16_t __iomem *)(host->regs->spare_area0 +
+		p = (uint16_t __iomem *)(host->regs->spare_area[0] +
 				((col - mtd->writesize) >> 1));
 	}
 
@@ -525,9 +984,9 @@ static void mxc_nand_write_buf(struct mtd_info *mtd,
 		void __iomem *p;
 
 		if (col < mtd->writesize) {
-			p = host->regs->main_area0 + (col & ~3);
+			p = host->regs->main_area[0] + (col & ~3);
 		} else {
-			p = host->regs->spare_area0 -
+			p = host->regs->spare_area[0] -
 						mtd->writesize + (col & ~3);
 		}
 
@@ -595,9 +1054,9 @@ static void mxc_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
 		void __iomem *p;
 
 		if (col < mtd->writesize) {
-			p = host->regs->main_area0 + (col & ~3);
+			p = host->regs->main_area[0] + (col & ~3);
 		} else {
-			p = host->regs->spare_area0 -
+			p = host->regs->spare_area[0] -
 					mtd->writesize + (col & ~3);
 		}
 
@@ -683,7 +1142,7 @@ static void mxc_nand_select_chip(struct mtd_info *mtd, int chip)
  * Used by the upper layer to write command to NAND Flash for
  * different operations to be carried out on NAND Flash
  */
-static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
+void mxc_nand_command(struct mtd_info *mtd, unsigned command,
 				int column, int page_addr)
 {
 	struct nand_chip *nand_chip = mtd->priv;
@@ -705,6 +1164,7 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
 		break;
 
 	case NAND_CMD_READ0:
+		host->page_addr = page_addr;
 		host->col_addr = column;
 		host->spare_only = false;
 		break;
@@ -750,7 +1210,7 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
 	case NAND_CMD_PAGEPROG:
 		send_prog_page(host, 0, host->spare_only);
 
-		if (host->pagesize_2k) {
+		if (host->pagesize_2k && !is_mxc_nfc_11()) {
 			/* data in 4 areas datas */
 			send_prog_page(host, 1, host->spare_only);
 			send_prog_page(host, 2, host->spare_only);
@@ -780,30 +1240,12 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
 
 	/* Write out page address, if necessary */
 	if (page_addr != -1) {
-		/* paddr_0 - p_addr_7 */
-		send_addr(host, (page_addr & 0xff));
-
-		if (host->pagesize_2k) {
-			send_addr(host, (page_addr >> 8) & 0xFF);
-			if (mtd->size >= 0x10000000) {
-				/* paddr_8 - paddr_15 */
-				send_addr(host, (page_addr >> 8) & 0xff);
-				send_addr(host, (page_addr >> 16) & 0xff);
-			} else {
-				/* paddr_8 - paddr_15 */
-				send_addr(host, (page_addr >> 8) & 0xff);
-			}
-		} else {
-			/* One more address cycle for higher density devices */
-			if (mtd->size >= 0x4000000) {
-				/* paddr_8 - paddr_15 */
-				send_addr(host, (page_addr >> 8) & 0xff);
-				send_addr(host, (page_addr >> 16) & 0xff);
-			} else {
-				/* paddr_8 - paddr_15 */
-				send_addr(host, (page_addr >> 8) & 0xff);
-			}
-		}
+		u32 page_mask = nand_chip->pagemask;
+		do {
+			send_addr(host, page_addr & 0xFF);
+			page_addr >>= 8;
+			page_mask >>= 8;
+		} while (page_mask);
 	}
 
 	/* Command post-processing step */
@@ -819,9 +1261,11 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
 			send_cmd(host, NAND_CMD_READSTART);
 			/* read for each AREA */
 			send_read_page(host, 0, host->spare_only);
-			send_read_page(host, 1, host->spare_only);
-			send_read_page(host, 2, host->spare_only);
-			send_read_page(host, 3, host->spare_only);
+			if (!is_mxc_nfc_11()) {
+				send_read_page(host, 1, host->spare_only);
+				send_read_page(host, 2, host->spare_only);
+				send_read_page(host, 3, host->spare_only);
+			}
 		} else {
 			send_read_page(host, 0, host->spare_only);
 		}
@@ -843,6 +1287,24 @@ static void mxc_nand_command(struct mtd_info *mtd, unsigned command,
 	}
 }
 
+#ifdef MXC_NFC_V1_1
+static void mxc_setup_config1(void)
+{
+	uint16_t tmp;
+
+	tmp = readw(&host->regs->nfc_config1);
+	tmp |= NFC_ONE_CYCLE;
+	tmp |= NFC_4_8N_ECC;
+	writew(tmp, &host->regs->nfc_config1);
+	if (host->pagesize_2k)
+		writew(64/2, &host->regs->nfc_spare_area_size);
+	else
+		writew(16/2, &host->regs->nfc_spare_area_size);
+}
+#else
+#define mxc_setup_config1()
+#endif
+
 int board_nand_init(struct nand_chip *this)
 {
 	struct mtd_info *mtd;
@@ -874,10 +1336,23 @@ int board_nand_init(struct nand_chip *this)
 	this->ecc.calculate = mxc_nand_calculate_ecc;
 	this->ecc.hwctl = mxc_nand_enable_hwecc;
 	this->ecc.correct = mxc_nand_correct_data;
-	this->ecc.mode = NAND_ECC_HW;
+	if (is_mxc_nfc_11()) {
+		this->ecc.mode = NAND_ECC_HW_SYNDROME;
+		this->ecc.read_page = mxc_nand_read_page_syndrome;
+		this->ecc.read_page_raw = mxc_nand_read_page_raw_syndrome;
+		this->ecc.read_oob = mxc_nand_read_oob_syndrome;
+		this->ecc.write_page = mxc_nand_write_page_syndrome;
+		this->ecc.write_page_raw = mxc_nand_write_page_raw_syndrome;
+		this->ecc.write_oob = mxc_nand_write_oob_syndrome;
+		this->ecc.bytes = 9;
+		this->ecc.prepad = 7;
+	} else {
+		this->ecc.mode = NAND_ECC_HW;
+	}
+
+	host->pagesize_2k = 0;
+
 	this->ecc.size = 512;
-	this->ecc.bytes = 3;
-	this->ecc.layout = &nand_hw_eccoob;
 	tmp = readw(&host->regs->nfc_config1);
 	tmp |= NFC_ECC_EN;
 	writew(tmp, &host->regs->nfc_config1);
@@ -888,7 +1363,6 @@ int board_nand_init(struct nand_chip *this)
 	tmp &= ~NFC_ECC_EN;
 	writew(tmp, &host->regs->nfc_config1);
 #endif
-
 	/* Reset NAND */
 	this->cmdfunc(mtd, NAND_CMD_RESET, -1, -1);
 
@@ -911,10 +1385,11 @@ int board_nand_init(struct nand_chip *this)
 
 #ifdef CONFIG_SYS_NAND_LARGEPAGE
 	host->pagesize_2k = 1;
-	this->ecc.layout = &nand_hw_eccoob_largepage;
+	this->ecc.layout = &nand_hw_eccoob2k;
 #else
 	host->pagesize_2k = 0;
+	this->ecc.layout = &nand_hw_eccoob;
 #endif
-
+	mxc_setup_config1();
 	return err;
 }
diff --git a/include/configs/MPC8569MDS.h b/include/configs/MPC8569MDS.h
index ae2fc19..6cf807b 100644
--- a/include/configs/MPC8569MDS.h
+++ b/include/configs/MPC8569MDS.h
@@ -62,6 +62,12 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_L2_CACHE				/* toggle L2 cache	*/
 #define CONFIG_BTB				/* toggle branch predition */
 
+#ifdef CONFIG_MK_NAND
+#define CONFIG_NAND_U_BOOT		1
+#define CONFIG_RAMBOOT_NAND		1
+#define CONFIG_RAMBOOT_TEXT_BASE	0xf8f82000
+#endif
+
 /*
  * Only possible on E500 Version 2 or newer cores.
  */
@@ -74,16 +80,29 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_MEMTEST_END		0x00400000
 
 /*
+ * Config the L2 Cache as L2 SRAM
+ */
+#define CONFIG_SYS_INIT_L2_ADDR		0xf8f80000
+#define CONFIG_SYS_INIT_L2_ADDR_PHYS	CONFIG_SYS_INIT_L2_ADDR
+#define CONFIG_SYS_L2_SIZE		(512 << 10)
+#define CONFIG_SYS_INIT_L2_END	(CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_L2_SIZE)
+
+/*
  * Base addresses -- Note these are effective addresses where the
  * actual resources get mapped (not physical addresses)
  */
-#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
 #define CONFIG_SYS_CCSRBAR		0xe0000000	/* relocated CCSRBAR */
 #define CONFIG_SYS_CCSRBAR_PHYS	CONFIG_SYS_CCSRBAR
 						/* physical addr of CCSRBAR */
 #define CONFIG_SYS_IMMR		CONFIG_SYS_CCSRBAR
 						/* PQII uses CONFIG_SYS_IMMR */
 
+#if defined(CONFIG_RAMBOOT_NAND) && !defined(CONFIG_NAND_SPL)
+#define CONFIG_SYS_CCSRBAR_DEFAULT	CONFIG_SYS_CCSRBAR
+#else
+#define CONFIG_SYS_CCSRBAR_DEFAULT	0xff700000	/* CCSRBAR Default */
+#endif
+
 #define CONFIG_SYS_PCI1_ADDR           (CONFIG_SYS_CCSRBAR+0x8000)
 #define CONFIG_SYS_PCIE1_ADDR          (CONFIG_SYS_CCSRBAR+0xa000)
 
@@ -152,8 +171,8 @@ extern unsigned long get_clock_freq(void);
 #define CONFIG_SYS_BCSR_BASE_PHYS	CONFIG_SYS_BCSR_BASE
 
 /*Chip select 0 - Flash*/
-#define CONFIG_SYS_BR0_PRELIM		0xfe000801
-#define	CONFIG_SYS_OR0_PRELIM		0xfe000ff7
+#define CONFIG_FLASH_BR_PRELIM		0xfe000801
+#define	CONFIG_FLASH_OR_PRELIM		0xfe000ff7
 
 /*Chip select 1 - BCSR*/
 #define CONFIG_SYS_BR1_PRELIM		0xf8000801
@@ -175,12 +194,33 @@ extern unsigned long get_clock_freq(void);
 
 #define CONFIG_SYS_MONITOR_BASE	TEXT_BASE	/* start of monitor */
 
+#if defined(CONFIG_SYS_SPL) || defined(CONFIG_RAMBOOT_NAND)
+#define CONFIG_SYS_RAMBOOT
+#else
+#undef CONFIG_SYS_RAMBOOT
+#endif
+
 #define CONFIG_FLASH_CFI_DRIVER
 #define CONFIG_SYS_FLASH_CFI
 #define CONFIG_SYS_FLASH_EMPTY_INFO
 
 /* Chip select 3 - NAND */
+#ifndef CONFIG_NAND_SPL
 #define CONFIG_SYS_NAND_BASE		0xFC000000
+#else
+#define CONFIG_SYS_NAND_BASE		0xFFF00000
+#endif
+
+/* NAND boot: 4K NAND loader config */
+#define CONFIG_SYS_NAND_SPL_SIZE	0x1000
+#define CONFIG_SYS_NAND_U_BOOT_SIZE	((512 << 10) - 0x2000)
+#define CONFIG_SYS_NAND_U_BOOT_DST	(CONFIG_SYS_INIT_L2_ADDR)
+#define CONFIG_SYS_NAND_U_BOOT_START \
+	(CONFIG_SYS_INIT_L2_ADDR + CONFIG_SYS_NAND_SPL_SIZE)
+#define CONFIG_SYS_NAND_U_BOOT_OFFS	(0)
+#define CONFIG_SYS_NAND_U_BOOT_RELOC	(CONFIG_SYS_INIT_L2_END - 0x2000)
+#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP	((CONFIG_SYS_INIT_L2_END - 1) & ~0xF)
+
 #define CONFIG_SYS_NAND_BASE_PHYS	CONFIG_SYS_NAND_BASE
 #define CONFIG_SYS_NAND_BASE_LIST	{ CONFIG_SYS_NAND_BASE, }
 #define CONFIG_SYS_MAX_NAND_DEVICE	1
@@ -200,8 +240,18 @@ extern unsigned long get_clock_freq(void);
 				| OR_FCM_SCY_1 \
 				| OR_FCM_TRLX \
 				| OR_FCM_EHTR)
+
+#ifdef CONFIG_RAMBOOT_NAND
+#define CONFIG_SYS_BR0_PRELIM	CONFIG_NAND_BR_PRELIM	/* NAND Base Address */
+#define CONFIG_SYS_OR0_PRELIM	CONFIG_NAND_OR_PRELIM	/* NAND Options */
+#define CONFIG_SYS_BR3_PRELIM	CONFIG_FLASH_BR_PRELIM	/* NOR Base Address */
+#define CONFIG_SYS_OR3_PRELIM	CONFIG_FLASH_OR_PRELIM	/* NOR Options */
+#else
+#define CONFIG_SYS_BR0_PRELIM	CONFIG_FLASH_BR_PRELIM	/* NOR Base Address */
+#define CONFIG_SYS_OR0_PRELIM	CONFIG_FLASH_OR_PRELIM	/* NOR Options */
 #define CONFIG_SYS_BR3_PRELIM	CONFIG_NAND_BR_PRELIM /* NAND Base Address */
 #define CONFIG_SYS_OR3_PRELIM	CONFIG_NAND_OR_PRELIM /* NAND Options */
+#endif
 
 /*
  * SDRAM on the LocalBus
@@ -437,10 +487,18 @@ extern unsigned long get_clock_freq(void);
 /*
  * Environment
  */
+#if defined(CONFIG_SYS_RAMBOOT)
+#if defined(CONFIG_RAMBOOT_NAND)
+#define CONFIG_ENV_IS_IN_NAND	1
+#define CONFIG_ENV_SIZE		CONFIG_SYS_NAND_BLOCK_SIZE
+#define CONFIG_ENV_OFFSET	((512 * 1024) + CONFIG_SYS_NAND_BLOCK_SIZE)
+#endif
+#else
 #define CONFIG_ENV_IS_IN_FLASH	1
 #define CONFIG_ENV_ADDR		(CONFIG_SYS_MONITOR_BASE - CONFIG_ENV_SECT_SIZE)
 #define CONFIG_ENV_SECT_SIZE	0x20000	/* 256K(one sector) for env */
 #define CONFIG_ENV_SIZE		CONFIG_ENV_SECT_SIZE
+#endif
 
 #define CONFIG_LOADS_ECHO	1	/* echo on for serial download */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE	1	/* allow baudrate change */
diff --git a/include/fsl_nfc.h b/include/fsl_nfc.h
index da5be37..279aaa5 100644
--- a/include/fsl_nfc.h
+++ b/include/fsl_nfc.h
@@ -1,5 +1,4 @@
 /*
- *
  * (c) 2009 Magnus Lilja <lilja.magnus@gmail.com>
  *
  * See file CREDITS for list of people who contributed to this
@@ -25,21 +24,57 @@
 #define __FSL_NFC_H
 
 /*
+ * TODO: Use same register defs for nand_spl mxc nand driver
+ * and mtd mxc nand driver.
+ *
  * Register map and bit definitions for the Freescale NAND Flash
- * Controller present in i.MX31 and other devices.
+ * Controller present in various i.MX devices.
+ *
+ * MX31 and MX27 have version 1 which has
+ * 	4 512 byte main buffers and
+ * 	4 16 byte spare buffers
+ * 	to support up to 2K byte pagesize nand.
+ * 	Reading or writing a 2K page requires 4 FDI/FDO cycles.
+ *
+ * MX25 has version 1.1 which has
+ * 	8 512 byte main buffers and
+ * 	8 64 byte spare buffers
+ * 	to support up to 4K byte pagesize nand.
+ * 	Reading or writing a 2K or 4K page requires only 1 FDI/FDO cycle.
+ *      Also some of registers are moved and/or changed meaning as seen below.
  */
+#if defined(CONFIG_MX31) || defined(CONFIG_MX27)
+#define MXC_NFC_V1
+#elif defined(CONFIG_MX25)
+#define MXC_NFC_V1_1
+#else
+#warning "MXC NFC version not defined"
+#endif
+
+#if defined(MXC_NFC_V1)
+#define NAND_MXC_NR_BUFS		4
+#define NAND_MXC_SPARE_BUF_SIZE		16
+#define NAND_MXC_REG_OFFSET		0xe00
+#define NAND_MXC_2K_MULTI_CYCLE		1
+#elif defined(MXC_NFC_V1_1)
+#define NAND_MXC_NR_BUFS		8
+#define NAND_MXC_SPARE_BUF_SIZE		64
+#define NAND_MXC_REG_OFFSET		0x1e00
+#else
+#error "define CONFIG_NAND_MXC_VXXX to use the mxc spl_nand driver"
+#endif
 
 struct fsl_nfc_regs {
-	u32 main_area0[128]; /* @0x000 */
-	u32 main_area1[128];
-	u32 main_area2[128];
-	u32 main_area3[128];
-	u32 spare_area0[4];
-	u32 spare_area1[4];
-	u32 spare_area2[4];
-	u32 spare_area3[4];
-	u32 reserved1[64 - 16 + 64 * 5];
-	u16 bufsiz; /* @ 0xe00 */
+	u32 main_area[NAND_MXC_NR_BUFS][512/4];
+	u32 spare_area[NAND_MXC_NR_BUFS][NAND_MXC_SPARE_BUF_SIZE/4];
+	/*
+	 * reserved size is offset of nfc registers
+	 * minus total main and spare sizes
+	 */
+	u8 reserved1[NAND_MXC_REG_OFFSET
+		- NAND_MXC_NR_BUFS * (512 + NAND_MXC_SPARE_BUF_SIZE)];
+#if defined(MXC_NFC_V1)
+	u16 bufsiz;
 	u16 reserved2;
 	u16 buffer_address;
 	u16 flash_add;
@@ -54,6 +89,30 @@ struct fsl_nfc_regs {
 	u16 nand_flash_wr_pr_st;
 	u16 nand_flash_config1;
 	u16 nand_flash_config2;
+#elif defined(MXC_NFC_V1_1)
+	u16 reserved2[2];
+	u16 buffer_address;
+	u16 flash_add;
+	u16 flash_cmd;
+	u16 configuration;
+	u16 ecc_status_result;
+	u16 ecc_status_result2;
+	u16 spare_area_size;
+	u16 nf_wr_prot;
+	u16 reserved3[2];
+	u16 nand_flash_wr_pr_st;
+	u16 nand_flash_config1;
+	u16 nand_flash_config2;
+	u16 reserved4;
+	u16 unlock_start_blk_add0;
+	u16 unlock_end_blk_add0;
+	u16 unlock_start_blk_add1;
+	u16 unlock_end_blk_add1;
+	u16 unlock_start_blk_add2;
+	u16 unlock_end_blk_add2;
+	u16 unlock_start_blk_add3;
+	u16 unlock_end_blk_add3;
+#endif
 };
 
 /*
@@ -98,6 +157,9 @@ struct fsl_nfc_regs {
  */
 #define NFC_INT		0x8000
 
+#ifdef MXC_NFC_V1_1
+#define NFC_4_8N_ECC	(1 << 0)
+#endif
 #define NFC_SP_EN	(1 << 2)
 #define NFC_ECC_EN	(1 << 3)
 #define NFC_INT_MSK	(1 << 4)
diff --git a/nand_spl/board/freescale/mpc8569mds/Makefile b/nand_spl/board/freescale/mpc8569mds/Makefile
new file mode 100644
index 0000000..7ed9d61
--- /dev/null
+++ b/nand_spl/board/freescale/mpc8569mds/Makefile
@@ -0,0 +1,133 @@
+#
+# (C) Copyright 2007
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# Copyright 2009 Freescale Semiconductor, Inc.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+NAND_SPL := y
+TEXT_BASE := 0xfff00000
+PAD_TO := 0xfff01000
+
+include $(TOPDIR)/config.mk
+
+LDSCRIPT= $(TOPDIR)/cpu/$(CPU)/u-boot-nand_spl.lds
+LDFLAGS	= -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS)
+AFLAGS	+= -DCONFIG_NAND_SPL
+CFLAGS	+= -DCONFIG_NAND_SPL
+
+SOBJS	= start.o resetvec.o
+COBJS	= cache.o cpu_init_early.o cpu_init_nand.o fsl_law.o law.o \
+	  nand_boot.o nand_boot_fsl_elbc.o ns16550.o tlb.o tlb_table.o
+
+SRCS	:= $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
+OBJS	:= $(addprefix $(obj),$(SOBJS) $(COBJS))
+__OBJS	:= $(SOBJS) $(COBJS)
+LNDIR	:= $(OBJTREE)/nand_spl/board/$(BOARDDIR)
+
+nandobj	:= $(OBJTREE)/nand_spl/
+
+ALL	= $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
+
+all:	$(obj).depend $(ALL)
+
+$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl
+	$(OBJCOPY) ${OBJCFLAGS} --pad-to=$(PAD_TO) -O binary $< $@
+
+$(nandobj)u-boot-spl.bin:	$(nandobj)u-boot-spl
+	$(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
+
+$(nandobj)u-boot-spl:	$(OBJS)
+	cd $(LNDIR) && $(LD) $(LDFLAGS) $(__OBJS) $(PLATFORM_LIBS) \
+		-Map $(nandobj)u-boot-spl.map \
+		-o $(nandobj)u-boot-spl
+
+# create symbolic links for common files
+
+$(obj)cache.c:
+	@rm -f $(obj)cache.c
+	ln -sf $(SRCTREE)/lib_ppc/cache.c $(obj)cache.c
+
+$(obj)cpu_init_early.c:
+	@rm -f $(obj)cpu_init_early.c
+	ln -sf $(SRCTREE)/cpu/mpc85xx/cpu_init_early.c $(obj)cpu_init_early.c
+
+$(obj)cpu_init_nand.c:
+	@rm -f $(obj)cpu_init_nand.c
+	ln -sf $(SRCTREE)/cpu/mpc85xx/cpu_init_nand.c $(obj)cpu_init_nand.c
+
+$(obj)fsl_law.c:
+	@rm -f $(obj)fsl_law.c
+	ln -sf $(SRCTREE)/drivers/misc/fsl_law.c $(obj)fsl_law.c
+
+$(obj)law.c:
+	@rm -f $(obj)law.c
+	ln -sf $(SRCTREE)/board/$(BOARDDIR)/law.c $(obj)law.c
+
+$(obj)nand_boot_fsl_elbc.c:
+	@rm -f $(obj)nand_boot_fsl_elbc.c
+	ln -sf $(SRCTREE)/nand_spl/nand_boot_fsl_elbc.c \
+	       $(obj)nand_boot_fsl_elbc.c
+
+$(obj)ns16550.c:
+	@rm -f $(obj)ns16550.c
+	ln -sf $(SRCTREE)/drivers/serial/ns16550.c $(obj)ns16550.c
+
+$(obj)resetvec.S:
+	@rm -f $(obj)resetvec.S
+	ln -s $(SRCTREE)/cpu/$(CPU)/resetvec.S $(obj)resetvec.S
+
+$(obj)fixed_ivor.S:
+	@rm -f $(obj)fixed_ivor.S
+	ln -sf $(SRCTREE)/cpu/mpc85xx/fixed_ivor.S $(obj)fixed_ivor.S
+
+$(obj)start.S: $(obj)fixed_ivor.S
+	@rm -f $(obj)start.S
+	ln -sf $(SRCTREE)/cpu/mpc85xx/start.S $(obj)start.S
+
+$(obj)tlb.c:
+	@rm -f $(obj)tlb.c
+	ln -sf $(SRCTREE)/cpu/mpc85xx/tlb.c $(obj)tlb.c
+
+$(obj)tlb_table.c:
+	@rm -f $(obj)tlb_table.c
+	ln -sf $(SRCTREE)/board/$(BOARDDIR)/tlb.c $(obj)tlb_table.c
+
+ifneq ($(OBJTREE), $(SRCTREE))
+$(obj)nand_boot.c:
+	@rm -f $(obj)nand_boot.c
+	ln -s $(SRCTREE)/nand_spl/board/$(BOARDDIR)/nand_boot.c $(obj)nand_boot.c
+endif
+
+#########################################################################
+
+$(obj)%.o:	$(obj)%.S
+	$(CC) $(AFLAGS) -c -o $@ $<
+
+$(obj)%.o:	$(obj)%.c
+	$(CC) $(CFLAGS) -c -o $@ $<
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
diff --git a/nand_spl/board/freescale/mpc8569mds/nand_boot.c b/nand_spl/board/freescale/mpc8569mds/nand_boot.c
new file mode 100644
index 0000000..e030656
--- /dev/null
+++ b/nand_spl/board/freescale/mpc8569mds/nand_boot.c
@@ -0,0 +1,75 @@
+/*
+ * Copyright 2009 Freescale Semiconductor, Inc.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ *
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+#include <common.h>
+#include <mpc85xx.h>
+#include <asm-ppc/io.h>
+#include <ns16550.h>
+#include <nand.h>
+#include <asm/mmu.h>
+#include <asm/immap_85xx.h>
+#include <asm/fsl_ddr_sdram.h>
+#include <asm/fsl_law.h>
+
+#define SYSCLK_66       66666666
+
+DECLARE_GLOBAL_DATA_PTR;
+
+void board_init_f(ulong bootflag)
+{
+	uint plat_ratio, bus_clk, sys_clk;
+	volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+
+	sys_clk = SYSCLK_66;
+
+	plat_ratio = gur->porpllsr & 0x0000003e;
+	plat_ratio >>= 1;
+	bus_clk = plat_ratio * sys_clk;
+	NS16550_init((NS16550_t)CONFIG_SYS_NS16550_COM1,
+			bus_clk / 16 / CONFIG_BAUDRATE);
+
+	puts("\nNAND boot... ");
+
+	/* copy code to DDR and jump to it - this should not return */
+	/* NOTE - code has to be copied out of NAND buffer before
+	 * other blocks can be read.
+	 */
+	relocate_code(CONFIG_SYS_NAND_U_BOOT_RELOC_SP, 0,
+			CONFIG_SYS_NAND_U_BOOT_RELOC);
+}
+
+void board_init_r(gd_t *gd, ulong dest_addr)
+{
+	nand_boot();
+}
+
+void putc(char c)
+{
+	if (c == '\n')
+		NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, '\r');
+
+	NS16550_putc((NS16550_t)CONFIG_SYS_NS16550_COM1, c);
+}
+
+void puts(const char *str)
+{
+	while (*str)
+		putc(*str++);
+}
diff --git a/nand_spl/nand_boot_fsl_nfc.c b/nand_spl/nand_boot_fsl_nfc.c
index a9df2a8..f4040a7 100644
--- a/nand_spl/nand_boot_fsl_nfc.c
+++ b/nand_spl/nand_boot_fsl_nfc.c
@@ -26,11 +26,15 @@
 
 #include <common.h>
 #include <nand.h>
+#ifdef CONFIG_MX31
 #include <asm-arm/arch/mx31-regs.h>
+#else
+#include <asm-arm/arch/imx-regs.h>
+#endif
 #include <asm/io.h>
 #include <fsl_nfc.h>
 
-static struct fsl_nfc_regs *nfc;
+struct fsl_nfc_regs *nfc;
 
 static void nfc_wait_ready(void)
 {
@@ -45,13 +49,35 @@ static void nfc_wait_ready(void)
 	writew(tmp, &nfc->nand_flash_config2);
 }
 
-static void nfc_nand_init(void)
+void nfc_nand_init(void)
 {
+#if defined(MXC_NFC_V1_1)
+	int ecc_per_page  = CONFIG_SYS_NAND_PAGE_SIZE / 512;
+	int config1;
+
+	writew(CONFIG_SYS_NAND_SPARE_SIZE / 2, &nfc->spare_area_size);
+
+	/* unlocking RAM Buff */
+	writew(0x2, &nfc->configuration);
+
+	/* hardware ECC checking and correct */
+	config1 = readw(&nfc->nand_flash_config1) | NFC_ECC_EN | 0x800;
+	/*
+	 * if spare size is larger that 16 bytes per 512 byte hunk
+	 * then use 8 symbol correction instead of 4
+	 */
+	if ((CONFIG_SYS_NAND_SPARE_SIZE / ecc_per_page) > 16)
+		config1 &= ~NFC_4_8N_ECC;
+	else
+		config1 |= NFC_4_8N_ECC;
+	writew(config1, &nfc->nand_flash_config1);
+#elif defined(MXC_NFC_V1)
 	/* unlocking RAM Buff */
 	writew(0x2, &nfc->configuration);
 
 	/* hardware ECC checking and correct */
 	writew(NFC_ECC_EN, &nfc->nand_flash_config1);
+#endif
 }
 
 static void nfc_nand_command(unsigned short command)
@@ -65,12 +91,12 @@ static void nfc_nand_page_address(unsigned int page_address)
 {
 	unsigned int page_count;
 
-	writew(0x00, &nfc->flash_cmd);
+	writew(0x00, &nfc->flash_add);
 	writew(NFC_ADDR, &nfc->nand_flash_config2);
 	nfc_wait_ready();
 
-	/* code only for 2kb flash */
-	if (CONFIG_SYS_NAND_PAGE_SIZE == 0x800) {
+	/* code only for large page flash */
+	if (CONFIG_SYS_NAND_PAGE_SIZE > 512) {
 		writew(0x00, &nfc->flash_add);
 		writew(NFC_ADDR, &nfc->nand_flash_config2);
 		nfc_wait_ready();
@@ -88,22 +114,38 @@ static void nfc_nand_page_address(unsigned int page_address)
 			page_count = page_count >> 8;
 		} while (page_count);
 	}
+
+	writew(0x00, &nfc->flash_add);
+	writew(NFC_ADDR, &nfc->nand_flash_config2);
+	nfc_wait_ready();
 }
 
 static void nfc_nand_data_output(void)
 {
+	int config1 = readw(&nfc->nand_flash_config1);
+#ifdef NAND_MXC_2K_MULTI_CYCLE
 	int i;
+#endif
 
+	config1 |= NFC_ECC_EN | NFC_INT_MSK;
+	writew(config1, &nfc->nand_flash_config1);
+	writew(0, &nfc->buffer_address);
+	writew(NFC_OUTPUT, &nfc->nand_flash_config2);
+	nfc_wait_ready();
+#ifdef NAND_MXC_2K_MULTI_CYCLE
 	/*
-	 * The NAND controller requires four output commands for
-	 * large page devices.
+	 * This NAND controller requires multiple input commands
+	 * for pages larger than 512 bytes.
 	 */
-	for (i = 0; i < (CONFIG_SYS_NAND_PAGE_SIZE / 512); i++) {
-		writew(NFC_ECC_EN, &nfc->nand_flash_config1);
-		writew(i, &nfc->buffer_address); /* read in i:th buffer */
+	for (i = 1; i < (CONFIG_SYS_NAND_PAGE_SIZE / 512); i++) {
+		config1 = readw(&nfc->nand_flash_config1);
+		config1 |= NFC_ECC_EN | NFC_INT_MSK;
+		writew(config1, &nfc->nand_flash_config1);
+		writew(i, &nfc->buffer_address);
 		writew(NFC_OUTPUT, &nfc->nand_flash_config2);
 		nfc_wait_ready();
 	}
+#endif
 }
 
 static int nfc_nand_check_ecc(void)
@@ -121,7 +163,7 @@ static int nfc_read_page(unsigned int page_address, unsigned char *buf)
 	nfc_nand_command(NAND_CMD_READ0);
 	nfc_nand_page_address(page_address);
 
-	if (CONFIG_SYS_NAND_PAGE_SIZE == 0x800)
+	if (CONFIG_SYS_NAND_PAGE_SIZE > 512)
 		nfc_nand_command(NAND_CMD_READSTART);
 
 	nfc_nand_data_output(); /* fill the main buffer 0 */
@@ -129,7 +171,7 @@ static int nfc_read_page(unsigned int page_address, unsigned char *buf)
 	if (nfc_nand_check_ecc())
 		return -1;
 
-	src = &nfc->main_area0[0];
+	src = &nfc->main_area[0][0];
 	dst = (u32 *)buf;
 
 	/* main copy loop from NAND-buffer to SDRAM memory */
@@ -154,12 +196,12 @@ static int is_badblock(int pagenumber)
 		nfc_nand_command(NAND_CMD_READ0);
 		nfc_nand_page_address(page);
 
-		if (CONFIG_SYS_NAND_PAGE_SIZE == 0x800)
+		if (CONFIG_SYS_NAND_PAGE_SIZE > 512)
 			nfc_nand_command(NAND_CMD_READSTART);
 
 		nfc_nand_data_output(); /* fill the main buffer 0 */
 
-		src = &nfc->spare_area0[0];
+		src = &nfc->spare_area[0][0];
 
 		/*
 		 * IMPORTANT NOTE: The nand flash controller uses a non-
@@ -209,7 +251,7 @@ static int nand_load(unsigned int from, unsigned int size, unsigned char *buf)
 		if (!(page % CONFIG_SYS_NAND_PAGE_COUNT)) {
 			/*
 			 * Yes, new block. See if this block is good. If not,
-			 * loop until we find i good block.
+			 * loop until we find a good block.
 			 */
 			while (is_badblock(page)) {
 				page = page + CONFIG_SYS_NAND_PAGE_COUNT;