From: Dmitry Osipenko <digetx@gmail.com>
Date: Mon, 10 May 2021 21:10:06 +0000 (+0300)
Subject: ARM: tegra: Add cooling cells to ACTMON device-tree node
X-Git-Tag: accepted/tizen/unified/20230118.172025~6845^2~14^2~2
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=592b74b1f0ebfe49d2e66b2b4bd95ff3678c5696;p=platform%2Fkernel%2Flinux-rpi.git

ARM: tegra: Add cooling cells to ACTMON device-tree node

The ACTMON module monitors activity of memory clients and decisions
about a minimum required memory frequency are made based on info from
ACTMON. Add cooling cells to ACTMON device-tree node in order to turn
it into a cooling device that will throttle memory freq on overheat.

Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
---

diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi
index 0b678af..8b38f12 100644
--- a/arch/arm/boot/dts/tegra124.dtsi
+++ b/arch/arm/boot/dts/tegra124.dtsi
@@ -283,7 +283,7 @@
 		reg = <0x0 0x60007000 0x0 0x1000>;
 	};
 
-	actmon@6000c800 {
+	actmon: actmon@6000c800 {
 		compatible = "nvidia,tegra124-actmon";
 		reg = <0x0 0x6000c800 0x0 0x400>;
 		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
@@ -295,6 +295,7 @@
 		operating-points-v2 = <&emc_bw_dfs_opp_table>;
 		interconnects = <&mc TEGRA124_MC_MPCORER &emc>;
 		interconnect-names = "cpu-read";
+		#cooling-cells = <2>;
 	};
 
 	gpio: gpio@6000d000 {
diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi
index 44a6dbb..c577c19 100644
--- a/arch/arm/boot/dts/tegra30.dtsi
+++ b/arch/arm/boot/dts/tegra30.dtsi
@@ -410,7 +410,7 @@
 		reg = <0x6000c000 0x150>; /* AHB Arbitration + Gizmo Controller */
 	};
 
-	actmon@6000c800 {
+	actmon: actmon@6000c800 {
 		compatible = "nvidia,tegra30-actmon";
 		reg = <0x6000c800 0x400>;
 		interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
@@ -422,6 +422,7 @@
 		operating-points-v2 = <&emc_bw_dfs_opp_table>;
 		interconnects = <&mc TEGRA30_MC_MPCORER &emc>;
 		interconnect-names = "cpu-read";
+		#cooling-cells = <2>;
 	};
 
 	gpio: gpio@6000d000 {