From: Akash Asthana Date: Tue, 23 Jun 2020 10:38:50 +0000 (+0530) Subject: soc: qcom: geni: Support for ICC voting X-Git-Tag: v5.10.7~1991^2~5^2~22 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=58ffbba6a39979baa22d2f7e69faeffa2d9c0641;p=platform%2Fkernel%2Flinux-rpi.git soc: qcom: geni: Support for ICC voting Add necessary macros and structure variables to support ICC BW voting from individual SE drivers. Signed-off-by: Akash Asthana Reviewed-by: Matthias Kaehlcke Link: https://lore.kernel.org/r/1592908737-7068-2-git-send-email-akashast@codeaurora.org Signed-off-by: Bjorn Andersson --- diff --git a/drivers/soc/qcom/qcom-geni-se.c b/drivers/soc/qcom/qcom-geni-se.c index 7d622ea..950e347 100644 --- a/drivers/soc/qcom/qcom-geni-se.c +++ b/drivers/soc/qcom/qcom-geni-se.c @@ -92,6 +92,9 @@ struct geni_wrapper { struct clk_bulk_data ahb_clks[NUM_AHB_CLKS]; }; +static const char * const icc_path_names[] = {"qup-core", "qup-config", + "qup-memory"}; + #define QUP_HW_VER_REG 0x4 /* Common SE registers */ @@ -720,6 +723,85 @@ void geni_se_rx_dma_unprep(struct geni_se *se, dma_addr_t iova, size_t len) } EXPORT_SYMBOL(geni_se_rx_dma_unprep); +int geni_icc_get(struct geni_se *se, const char *icc_ddr) +{ + int i, err; + const char *icc_names[] = {"qup-core", "qup-config", icc_ddr}; + + for (i = 0; i < ARRAY_SIZE(se->icc_paths); i++) { + if (!icc_names[i]) + continue; + + se->icc_paths[i].path = devm_of_icc_get(se->dev, icc_names[i]); + if (IS_ERR(se->icc_paths[i].path)) + goto err; + } + + return 0; + +err: + err = PTR_ERR(se->icc_paths[i].path); + if (err != -EPROBE_DEFER) + dev_err_ratelimited(se->dev, "Failed to get ICC path '%s': %d\n", + icc_names[i], err); + return err; + +} +EXPORT_SYMBOL(geni_icc_get); + +int geni_icc_set_bw(struct geni_se *se) +{ + int i, ret; + + for (i = 0; i < ARRAY_SIZE(se->icc_paths); i++) { + ret = icc_set_bw(se->icc_paths[i].path, + se->icc_paths[i].avg_bw, se->icc_paths[i].avg_bw); + if (ret) { + dev_err_ratelimited(se->dev, "ICC BW voting failed on path '%s': %d\n", + icc_path_names[i], ret); + return ret; + } + } + + return 0; +} +EXPORT_SYMBOL(geni_icc_set_bw); + +/* To do: Replace this by icc_bulk_enable once it's implemented in ICC core */ +int geni_icc_enable(struct geni_se *se) +{ + int i, ret; + + for (i = 0; i < ARRAY_SIZE(se->icc_paths); i++) { + ret = icc_enable(se->icc_paths[i].path); + if (ret) { + dev_err_ratelimited(se->dev, "ICC enable failed on path '%s': %d\n", + icc_path_names[i], ret); + return ret; + } + } + + return 0; +} +EXPORT_SYMBOL(geni_icc_enable); + +int geni_icc_disable(struct geni_se *se) +{ + int i, ret; + + for (i = 0; i < ARRAY_SIZE(se->icc_paths); i++) { + ret = icc_disable(se->icc_paths[i].path); + if (ret) { + dev_err_ratelimited(se->dev, "ICC disable failed on path '%s': %d\n", + icc_path_names[i], ret); + return ret; + } + } + + return 0; +} +EXPORT_SYMBOL(geni_icc_disable); + static int geni_se_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; diff --git a/include/linux/qcom-geni-se.h b/include/linux/qcom-geni-se.h index dd46494..80dbc01 100644 --- a/include/linux/qcom-geni-se.h +++ b/include/linux/qcom-geni-se.h @@ -6,6 +6,8 @@ #ifndef _LINUX_QCOM_GENI_SE #define _LINUX_QCOM_GENI_SE +#include + /* Transfer mode supported by GENI Serial Engines */ enum geni_se_xfer_mode { GENI_SE_INVALID, @@ -25,6 +27,17 @@ enum geni_se_protocol_type { struct geni_wrapper; struct clk; +enum geni_icc_path_index { + GENI_TO_CORE, + CPU_TO_GENI, + GENI_TO_DDR +}; + +struct geni_icc_path { + struct icc_path *path; + unsigned int avg_bw; +}; + /** * struct geni_se - GENI Serial Engine * @base: Base Address of the Serial Engine's register block @@ -33,6 +46,7 @@ struct clk; * @clk: Handle to the core serial engine clock * @num_clk_levels: Number of valid clock levels in clk_perf_tbl * @clk_perf_tbl: Table of clock frequency input to serial engine clock + * @icc_paths: Array of ICC paths for SE */ struct geni_se { void __iomem *base; @@ -41,6 +55,7 @@ struct geni_se { struct clk *clk; unsigned int num_clk_levels; unsigned long *clk_perf_tbl; + struct geni_icc_path icc_paths[3]; }; /* Common SE registers */ @@ -229,6 +244,21 @@ struct geni_se { #define GENI_SE_VERSION_MINOR(ver) ((ver & HW_VER_MINOR_MASK) >> HW_VER_MINOR_SHFT) #define GENI_SE_VERSION_STEP(ver) (ver & HW_VER_STEP_MASK) +/* + * Define bandwidth thresholds that cause the underlying Core 2X interconnect + * clock to run at the named frequency. These baseline values are recommended + * by the hardware team, and are not dynamically scaled with GENI bandwidth + * beyond basic on/off. + */ +#define CORE_2X_19_2_MHZ 960 +#define CORE_2X_50_MHZ 2500 +#define CORE_2X_100_MHZ 5000 +#define CORE_2X_150_MHZ 7500 +#define CORE_2X_200_MHZ 10000 +#define CORE_2X_236_MHZ 16383 + +#define GENI_DEFAULT_BW Bps_to_icc(1000) + #if IS_ENABLED(CONFIG_QCOM_GENI_SE) u32 geni_se_get_qup_hw_version(struct geni_se *se); @@ -416,5 +446,13 @@ int geni_se_rx_dma_prep(struct geni_se *se, void *buf, size_t len, void geni_se_tx_dma_unprep(struct geni_se *se, dma_addr_t iova, size_t len); void geni_se_rx_dma_unprep(struct geni_se *se, dma_addr_t iova, size_t len); + +int geni_icc_get(struct geni_se *se, const char *icc_ddr); + +int geni_icc_set_bw(struct geni_se *se); + +int geni_icc_enable(struct geni_se *se); + +int geni_icc_disable(struct geni_se *se); #endif #endif