From: Marek Szyprowski <m.szyprowski@samsung.com>
Date: Wed, 11 Dec 2024 13:06:28 +0000 (+0100)
Subject: riscv: tizen_bpif3_defconfig: reduce modules
X-Git-Tag: accepted/tizen/unified/20241221.103410~1
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=58b13358a1f47bc11731692eeaa36af0232012b0;p=platform%2Fkernel%2Flinux-riscv.git

riscv: tizen_bpif3_defconfig: reduce modules

Compile-in most of the drivers configured as modules and disable some
rarely used to ensure that modules will fit the /modules partition.

Wireless drivers are kept as modules, because they need access to the
firmware files during initalization. rtl8852be driver has been disabled,
because the PCI variant is not used on BPiF3 boards.

Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Change-Id: I2501e9e47147ca11dd5039c80c7bd628fdc32b1b
---

diff --git a/arch/riscv/configs/tizen_bpif3_defconfig b/arch/riscv/configs/tizen_bpif3_defconfig
index f799ac184b6d..b6a7d280ca61 100644
--- a/arch/riscv/configs/tizen_bpif3_defconfig
+++ b/arch/riscv/configs/tizen_bpif3_defconfig
@@ -197,6 +197,7 @@ CONFIG_VLAN_8021Q_MVRP=y
 CONFIG_NET_SCHED=y
 CONFIG_NET_CLS_CGROUP=y
 CONFIG_NETLINK_DIAG=y
+CONFIG_NET_L3_MASTER_DEV=y
 CONFIG_CGROUP_NET_PRIO=y
 CONFIG_CAN=y
 CONFIG_BT=y
@@ -204,9 +205,7 @@ CONFIG_BT_RFCOMM=y
 CONFIG_BT_RFCOMM_TTY=y
 CONFIG_BT_BNEP=y
 CONFIG_BT_HIDP=y
-CONFIG_BT_HCIBTUSB=m
 CONFIG_BT_HCIUART=y
-CONFIG_BT_HCIUART_H4=y
 CONFIG_BT_HCIUART_RTL=y
 CONFIG_CFG80211=y
 CONFIG_RFKILL=y
@@ -272,9 +271,6 @@ CONFIG_TCM_IBLOCK=y
 CONFIG_TCM_FILEIO=y
 CONFIG_NETDEVICES=y
 CONFIG_DUMMY=m
-CONFIG_MACVLAN=y
-CONFIG_IPVLAN=y
-CONFIG_VXLAN=y
 CONFIG_VETH=y
 CONFIG_VIRTIO_NET=y
 # CONFIG_NET_VENDOR_ALACRITECH is not set
@@ -326,14 +322,12 @@ CONFIG_K1X_EMAC=y
 # CONFIG_NET_VENDOR_XILINX is not set
 CONFIG_REALTEK_PHY=y
 CONFIG_CAN_FLEXCAN=y
-CONFIG_USB_RTL8152=m
+CONFIG_USB_RTL8152=y
 CONFIG_USB_USBNET=y
 # CONFIG_USB_NET_AX8817X is not set
 # CONFIG_USB_NET_AX88179_178A is not set
-CONFIG_USB_NET_CDC_NCM=m
 # CONFIG_USB_NET_NET1080 is not set
-CONFIG_USB_NET_QMI_WWAN=m
-CONFIG_USB_NET_ASIX=m
+CONFIG_USB_NET_ASIX=y
 # CONFIG_WLAN_VENDOR_ADMTEK is not set
 # CONFIG_WLAN_VENDOR_ATH is not set
 # CONFIG_WLAN_VENDOR_ATMEL is not set
@@ -347,7 +341,6 @@ CONFIG_USB_NET_ASIX=m
 # CONFIG_WLAN_VENDOR_PURELIFI is not set
 # CONFIG_WLAN_VENDOR_RALINK is not set
 CONFIG_RTL8852BS=m
-CONFIG_RTL8852BE=m
 # CONFIG_WLAN_VENDOR_RSI is not set
 # CONFIG_WLAN_VENDOR_SILABS is not set
 # CONFIG_WLAN_VENDOR_ST is not set