From: Justin P. Mattock Date: Mon, 30 Apr 2012 14:41:36 +0000 (-0700) Subject: staging: rtl8192u Fix typos. X-Git-Tag: v3.5-rc1~145^2~229^2~10 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=589b3d06fd159774f9f5c3639d8d5d938670c019;p=profile%2Fivi%2Fkernel-adaptation-intel-automotive.git staging: rtl8192u Fix typos. Signed-off-by: Justin P. Mattock Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/rtl8192u/r8180_93cx6.c b/drivers/staging/rtl8192u/r8180_93cx6.c index 8878cfe..0e8ff75 100644 --- a/drivers/staging/rtl8192u/r8180_93cx6.c +++ b/drivers/staging/rtl8192u/r8180_93cx6.c @@ -14,7 +14,7 @@ Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver. - We want to tanks the Authors of those projects and the Ndiswrapper + We want to thanks the Authors of those projects and the Ndiswrapper project Authors. */ diff --git a/drivers/staging/rtl8192u/r8180_93cx6.h b/drivers/staging/rtl8192u/r8180_93cx6.h index fb3ac97..3527d32 100644 --- a/drivers/staging/rtl8192u/r8180_93cx6.h +++ b/drivers/staging/rtl8192u/r8180_93cx6.h @@ -7,7 +7,7 @@ Parts of this driver are based on the rtl8180 driver skeleton from Patric Schenke & Andres Salomon Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver - We want to tanks the Authors of such projects and the Ndiswrapper project Authors. + We want to thanks the Authors of such projects and the Ndiswrapper project Authors. */ /*This files contains card eeprom (93c46 or 93c56) programming routines*/ diff --git a/drivers/staging/rtl8192u/r8192U.h b/drivers/staging/rtl8192u/r8192U.h index 43d459d..adeb724 100644 --- a/drivers/staging/rtl8192u/r8192U.h +++ b/drivers/staging/rtl8192u/r8192U.h @@ -11,7 +11,7 @@ Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver - We want to tanks the Authors of those projects and the Ndiswrapper + We want to thanks the Authors of those projects and the Ndiswrapper project Authors. */ @@ -98,7 +98,7 @@ do { if(rt_global_debug_component & component) \ #define COMP_INIT BIT2 // during driver initialization / halt / reset. -#define COMP_RECV BIT3 // Reveive part data path. +#define COMP_RECV BIT3 // Revive part data path. #define COMP_SEND BIT4 // Send part path. #define COMP_IO BIT5 // I/O Related. Added by Annie, 2006-03-02. #define COMP_POWER BIT6 // 802.11 Power Save mode or System/Device Power state related. @@ -322,7 +322,7 @@ typedef struct _tx_fwinfo_819x_usb { u8 TxSubCarrier:2; // This is used for legacy OFDM rate only. u8 STBC:2; u8 AllowAggregation:1; - u8 RtsHT:1; //Interpre RtsRate field as high throughput data rate + u8 RtsHT:1; //Interprete RtsRate field as high throughput data rate u8 RtsShort:1; //Short PLCP for CCK, or short GI for 11n MCS u8 RtsBandwidth:1; // This is used for HT MCS rate only. u8 RtsSubcarrier:2; // This is used for legacy OFDM rate only. diff --git a/drivers/staging/rtl8192u/r8192U_core.c b/drivers/staging/rtl8192u/r8192U_core.c index 9c00865..be86045 100644 --- a/drivers/staging/rtl8192u/r8192U_core.c +++ b/drivers/staging/rtl8192u/r8192U_core.c @@ -203,7 +203,7 @@ static void rtl819x_set_channel_map(u8 channel_plan, struct r8192_priv* priv) { Dot11d_Init(ieee); ieee->bGlobalDomain = false; - //acturally 8225 & 8256 rf chip only support B,G,24N mode + //actually 8225 & 8256 rf chip only support B,G,24N mode if ((priv->rf_chip == RF_8225) || (priv->rf_chip == RF_8256)) { min_chan = 1; @@ -1103,7 +1103,7 @@ inline u16 rtl8192_rate2rate(short rate) } -/* The protype of rx_isr has changed since one verion of Linux Kernel */ +/* The prototype of rx_isr has changed since one version of Linux Kernel */ static void rtl8192_rx_isr(struct urb *urb) { struct sk_buff *skb = (struct sk_buff *) urb->context; @@ -1476,7 +1476,7 @@ static void rtl8192_tx_isr(struct urb *tx_urb) if(tcb_desc->queue_index != TXCMD_QUEUE) { if(tx_urb->status == 0) { dev->trans_start = jiffies; - // As act as station mode, destion shall be unicast address. + // As act as station mode, destination shall be unicast address. //priv->ieee80211->stats.tx_bytes+=(skb->len - priv->ieee80211->tx_headroom); //priv->ieee80211->stats.tx_packets++; priv->stats.txoktotal++; @@ -1522,13 +1522,13 @@ static void rtl8192_tx_isr(struct urb *tx_urb) else if ((skb_queue_len(&priv->ieee80211->skb_drv_aggQ[queue_index])!= 0)&&\ (!(priv->ieee80211->queue_stop))) { // Tx Driver Aggregation process - /* The driver will aggregation the packets according to the following stets + /* The driver will aggregation the packets according to the following stats * 1. check whether there's tx irq available, for it's a completion return * function, it should contain enough tx irq; - * 2. check pakcet type; + * 2. check packet type; * 3. initialize sendlist, check whether the to-be send packet no greater than 1 - * 4. aggregation the packets, and fill firmware info and tx desc to it, etc. - * 5. check whehter the packet could be sent, otherwise just insert to wait head + * 4. aggregates the packets, and fill firmware info and tx desc to it, etc. + * 5. check whether the packet could be sent, otherwise just insert to wait head * */ skb = skb_dequeue(&priv->ieee80211->skb_drv_aggQ[queue_index]); if(!check_nic_enough_desc(dev, queue_index)) { @@ -2447,7 +2447,7 @@ static int rtl8192_qos_handle_probe_response(struct r8192_priv *priv, return 0; } -/* handle manage frame frame beacon and probe response */ +/* handle and manage frame from beacon and probe response */ static int rtl8192_handle_beacon(struct net_device * dev, struct ieee80211_beacon * beacon, struct ieee80211_network * network) @@ -2625,7 +2625,7 @@ bool GetHalfNmodeSupportByAPs819xUsb(struct net_device* dev) void rtl8192_refresh_supportrate(struct r8192_priv* priv) { struct ieee80211_device* ieee = priv->ieee80211; - //we donot consider set support rate for ABG mode, only HT MCS rate is set here. + //we do not consider set support rate for ABG mode, only HT MCS rate is set here. if (ieee->mode == WIRELESS_MODE_N_24G || ieee->mode == WIRELESS_MODE_N_5G) { memcpy(ieee->Regdot11HTOperationalRateSet, ieee->RegHTSuppRateSet, 16); @@ -2780,10 +2780,10 @@ static void rtl8192_init_priv_variable(struct net_device* dev) priv->TransmitConfig = // TCR_DurProcMode | //for RTL8185B, duration setting by HW //? TCR_DISReqQsize | - (TCR_MXDMA_2048<ShortRetryLimit<LongRetryLimit<bInHctTest) pHalData->ReceiveConfig = pHalData->CSMethod | @@ -3437,7 +3437,7 @@ if(Adapter->ResetProgress == RESET_TYPE_NORESET) { // User disable RF via registry. RT_TRACE((COMP_INIT|COMP_RF), DBG_LOUD, ("InitializeAdapter819xUsb(): Turn off RF for RegRfOff ----------\n")); MgntActSet_RF_State(Adapter, eRfOff, RF_CHANGE_BY_SW); - // Those action will be discard in MgntActSet_RF_State because off the same state + // Those action will be discard in MgntActSet_RF_State because of the same state for(eRFPath = 0; eRFPath NumTotalRFPath; eRFPath++) PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0); } @@ -3458,7 +3458,7 @@ if(Adapter->ResetProgress == RESET_TYPE_NORESET) if(pHalData->eRFPowerState == eRfOff) { MgntActSet_RF_State(Adapter, eRfOff, pMgntInfo->RfOffReason); - // Those action will be discard in MgntActSet_RF_State because off the same state + // Those action will be discard in MgntActSet_RF_State because of the same state for(eRFPath = 0; eRFPath NumTotalRFPath; eRFPath++) PHY_SetRFReg(Adapter, (RF90_RADIO_PATH_E)eRFPath, 0x4, 0xC00, 0x0); } @@ -3586,7 +3586,7 @@ TxCheckStuck(struct net_device *dev) //unsigned long flags; // - // Decide Stuch threshold according to current power save mode + // Decide such threshold according to current power save mode // // RT_TRACE(COMP_RESET, " ==> TxCheckStuck()\n"); @@ -3745,7 +3745,7 @@ rtl819x_ifcheck_resetornot(struct net_device *dev) // Driver should not check RX stuck in IBSS mode because it is required to // set Check BSSID in order to send beacon, however, if check BSSID is - // set, STA cannot hear any packet a all. Emily, 2008.04.12 + // set, STA cannot hear any packet at all. Emily, 2008.04.12 RxResetType = RxCheckStuck(dev); } if(TxResetType==RESET_TYPE_NORMAL || RxResetType==RESET_TYPE_NORMAL) @@ -3962,7 +3962,7 @@ RESET_START: up(&priv->wx_sem); RT_TRACE(COMP_RESET,"%s():<==========down process is finished\n",__FUNCTION__); //rtl8192_irq_disable(dev); - RT_TRACE(COMP_RESET,"%s():===========>start to up the driver\n",__FUNCTION__); + RT_TRACE(COMP_RESET,"%s():===========>start up the driver\n",__FUNCTION__); reset_status = _rtl8192_up(dev); RT_TRACE(COMP_RESET,"%s():<===========up process is finished\n",__FUNCTION__); @@ -4155,7 +4155,7 @@ extern void rtl819x_watchdog_wqcallback(struct work_struct *work) void watch_dog_timer_callback(unsigned long data) { struct r8192_priv *priv = ieee80211_priv((struct net_device *) data); - //printk("===============>watch_dog timer\n"); + //printk("===============>watch_dog timer\n"); queue_delayed_work(priv->priv_wq,&priv->watch_dog_wq, 0); mod_timer(&priv->watch_dog_timer, jiffies + MSECS(IEEE80211_WATCH_DOG_TIME)); } @@ -4170,7 +4170,7 @@ int _rtl8192_up(struct net_device *dev) init_status = rtl8192_adapter_start(dev); if(!init_status) { - RT_TRACE(COMP_ERR,"ERR!!! %s(): initialization is failed!\n", __FUNCTION__); + RT_TRACE(COMP_ERR,"ERR!!! %s(): initialization failed!\n", __FUNCTION__); priv->up=priv->ieee80211->ieee_up = 0; return -EAGAIN; } @@ -4256,7 +4256,7 @@ int rtl8192_down(struct net_device *dev) skb_queue_purge(&priv->ieee80211->skb_drv_aggQ [i]); } - //as cancel_delayed_work will del work->timer, so if work is not definedas struct delayed_work, it will corrupt + //as cancel_delayed_work will del work->timer, so if work is not defined as struct delayed_work, it will corrupt // flush_scheduled_work(); rtl8192_cancel_deferred_work(priv); deinit_hal_dm(dev); @@ -4516,7 +4516,7 @@ u8 HwRateToMRate90(bool bIsHT, u8 rate) /** * Function: UpdateRxPktTimeStamp - * Overview: Recored down the TSF time stamp when receiving a packet + * Overview: Record down the TSF time stamp when receiving a packet * * Input: * PADAPTER Adapter @@ -4556,9 +4556,9 @@ long rtl819x_translate_todbm(u8 signal_strength_index )// 0-100 index. } -/* 2008/01/22 MH We can not delcare RSSI/EVM total value of sliding window to +/* 2008/01/22 MH We can not declare RSSI/EVM total value of sliding window to be a local static. Otherwise, it may increase when we return from S3/S4. The - value will be kept in memory or disk. We must delcare the value in adapter + value will be kept in memory or disk. We must declare the value in adapter and it will be reinitialized when return from S3/S4. */ void rtl8192_process_phyinfo(struct r8192_priv * priv,u8* buffer, struct ieee80211_rx_stats * pprevious_stats, struct ieee80211_rx_stats * pcurrent_stats) { @@ -5091,7 +5091,7 @@ static void rtl8192_query_rxphystatus( tmp_rxevm = pofdm_buf->rxevm_X[i]; rx_evmX = (char)(tmp_rxevm); - // Do not use shift operation like "rx_evmX >>= 1" because the compilor of free build environment + // Do not use shift operation like "rx_evmX >>= 1" because the compiler of free build environment // fill most significant bit to "zero" when doing shifting operation which may change a negative // value to positive one, then the dbm value (which is supposed to be negative) is not correct anymore. rx_evmX /= 2; //dbm @@ -5171,7 +5171,7 @@ void TranslateRxSignalStuff819xUsb(struct sk_buff *skb, type = WLAN_FC_GET_TYPE(fc); praddr = hdr->addr1; - /* Check if the received packet is acceptabe. */ + /* Check if the received packet is acceptable. */ bpacket_match_bssid = ((IEEE80211_FTYPE_CTL != type) && (eqMacAddr(priv->ieee80211->current_network.bssid, (fc & IEEE80211_FCTL_TODS)? hdr->addr1 : (fc & IEEE80211_FCTL_FROMDS )? hdr->addr2 : hdr->addr3)) && (!pstats->bHwError) && (!pstats->bCRC)&& (!pstats->bICV)); @@ -5211,7 +5211,7 @@ void TranslateRxSignalStuff819xUsb(struct sk_buff *skb, /** * Function: UpdateReceivedRateHistogramStatistics -* Overview: Recored down the received data rate +* Overview: Record down the received data rate * * Input: * struct net_device *dev @@ -5401,7 +5401,7 @@ void query_rxdesc_status(struct sk_buff *skb, struct ieee80211_rx_stats *stats, } #ifdef USB_RX_AGGREGATION_SUPPORT - /* for the rx aggregated sub frame, the redundant space truelly contained in the packet */ + /* for the rx aggregated sub frame, the redundant space truly contained in the packet */ if(bIsRxAggrSubframe) { skb_pull(skb, 8); } @@ -5480,7 +5480,7 @@ void rtl8192_rx_nomal(struct sk_buff* skb) PacketShiftBytes = GetRxPacketShiftBytes819xUsb(&stats, false); } #endif - /* Process the MPDU recevied */ + /* Process the MPDU received */ skb_trim(skb, skb->len - 4/*sCrcLng*/); rx_pkt_len = skb->len; @@ -5538,7 +5538,7 @@ void rtl8192_rx_nomal(struct sk_buff* skb) if(PacketLength > agg_skb->len) { break; } - /* Process the MPDU recevied */ + /* Process the MPDU received */ skb = dev_alloc_skb(PacketLength); memcpy(skb_put(skb,PacketLength),agg_skb->data, PacketLength); skb_trim(skb, skb->len - 4/*sCrcLng*/); diff --git a/drivers/staging/rtl8192u/r8192U_dm.c b/drivers/staging/rtl8192u/r8192U_dm.c index 2dde9fa..3f79e61 100644 --- a/drivers/staging/rtl8192u/r8192U_dm.c +++ b/drivers/staging/rtl8192u/r8192U_dm.c @@ -38,7 +38,7 @@ static u32 edca_setting_UL[HT_IOT_PEER_MAX] = /*------------------------Define global variable-----------------------------*/ // Debug variable ? dig_t dm_digtable; -// Store current shoftware write register content for MAC PHY. +// Store current software write register content for MAC PHY. u8 dm_shadow[16][256] = {{0}}; // For Dynamic Rx Path Selection by Signal Strength DRxPathSel DM_RxPathSelTable; @@ -119,7 +119,7 @@ static void dm_pd_th(struct net_device *dev); static void dm_cs_ratio(struct net_device *dev); static void dm_init_ctstoself(struct net_device *dev); -// DM --> EDCA turboe mode control +// DM --> EDCA turbo mode control static void dm_check_edca_turbo(struct net_device *dev); // DM --> HW RF control @@ -348,7 +348,7 @@ extern void init_rate_adaptive(struct net_device * dev) * * Revised History: * When Who Remark - * 05/26/08 amy Create version 0 proting from windows code. + * 05/26/08 amy Create version 0 porting from windows code. * *---------------------------------------------------------------------------*/ static void dm_check_rate_adaptive(struct net_device * dev) @@ -543,7 +543,7 @@ static u32 OFDMSwingTable[OFDM_Table_Length] = { 0x5a400169, // 3, +3db 0x50800142, // 4, +2db 0x47c0011f, // 5, +1db - 0x40000100, // 6, +0db ===> default, upper for higher temprature, lower for low temprature + 0x40000100, // 6, +0db ===> default, upper for higher temperature, lower for low temperature 0x390000e4, // 7, -1db 0x32c000cb, // 8, -2db 0x2d4000b5, // 9, -3db @@ -678,7 +678,7 @@ static void dm_TXPowerTrackingCallback_TSSI(struct net_device * dev) { write_nic_byte(dev, 0x1ba, 0); viviflag = FALSE; - RT_TRACE(COMP_POWER_TRACKING, "we filted this data\n"); + RT_TRACE(COMP_POWER_TRACKING, "we filtered the data\n"); for(k = 0;k < 5; k++) tmp_report[k] = 0; break; @@ -864,14 +864,14 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device * dev) RT_TRACE(COMP_POWER_TRACKING, "Readback ThermalMeterA = %d \n", tmpRegA); if(tmpRegA < 3 || tmpRegA > 13) return; - if(tmpRegA >= 12) // if over 12, TP will be bad when high temprature + if(tmpRegA >= 12) // if over 12, TP will be bad when high temperature tmpRegA = 12; RT_TRACE(COMP_POWER_TRACKING, "Valid ThermalMeterA = %d \n", tmpRegA); priv->ThermalMeter[0] = ThermalMeterVal; //We use fixed value by Bryant's suggestion priv->ThermalMeter[1] = ThermalMeterVal; //We use fixed value by Bryant's suggestion - //Get current RF-A temprature index - if(priv->ThermalMeter[0] >= (u8)tmpRegA) //lower temprature + //Get current RF-A temperature index + if(priv->ThermalMeter[0] >= (u8)tmpRegA) //lower temperature { tmpOFDMindex = tmpCCK20Mindex = 6+(priv->ThermalMeter[0]-(u8)tmpRegA); tmpCCK40Mindex = tmpCCK20Mindex - 6; @@ -885,7 +885,7 @@ static void dm_TXPowerTrackingCallback_ThermalMeter(struct net_device * dev) else { tmpval = ((u8)tmpRegA - priv->ThermalMeter[0]); - if(tmpval >= 6) // higher temprature + if(tmpval >= 6) // higher temperature tmpOFDMindex = tmpCCK20Mindex = 0; // max to +6dB else tmpOFDMindex = tmpCCK20Mindex = 6 - tmpval; @@ -1457,9 +1457,9 @@ static void dm_InitializeTXPowerTracking_ThermalMeter(struct net_device *dev) { struct r8192_priv *priv = ieee80211_priv(dev); - // Tx Power tracking by Theremal Meter require Firmware R/W 3-wire. This mechanism + // Tx Power tracking by Thermal Meter require Firmware R/W 3-wire. This mechanism // can be enabled only when Firmware R/W 3-wire is enabled. Otherwise, frequent r/w - // 3-wire by driver cause RF goes into wrong state. + // 3-wire by driver causes RF to go into a wrong state. if(priv->ieee80211->FwRWRF) priv->btxpower_tracking = TRUE; else @@ -1520,7 +1520,7 @@ static void dm_CheckTXPowerTracking_ThermalMeter(struct net_device *dev) if(!TM_Trigger) { - //Attention!! You have to wirte all 12bits data to RF, or it may cause RF to crash + //Attention!! You have to write all 12bits data to RF, or it may cause RF to crash //actually write reg0x02 bit1=0, then bit1=1. //DbgPrint("Trigger ThermalMeter, write RF reg0x2 = 0x4d to 0x4f\n"); rtl8192_phy_SetRFReg(dev, RF90_PATH_A, 0x02, bMask12Bits, 0x4d); @@ -1744,7 +1744,7 @@ extern void dm_restore_dynamic_mechanism_state(struct net_device *dev) write_nic_dword(dev, RATR0, ratr_value); write_nic_byte(dev, UFWP, 1); } - //Resore TX Power Tracking Index + //Restore TX Power Tracking Index if(priv->btxpower_trackingInit && priv->btxpower_tracking){ dm_txpower_reset_recovery(dev); } @@ -2031,7 +2031,7 @@ static void dm_dig_init(struct net_device *dev) dm_digtable.dbg_mode = DM_DBG_OFF; //off=by real rssi value, on=by DM_DigTable.Rssi_val for new dig dm_digtable.dig_algorithm_switch = 0; - /* 2007/10/04 MH Define init gain threshol. */ + /* 2007/10/04 MH Define init gain threshold. */ dm_digtable.dig_state = DM_STA_DIG_MAX; dm_digtable.dig_highpwr_state = DM_STA_DIG_MAX; dm_digtable.initialgain_lowerbound_state = false; @@ -2097,7 +2097,7 @@ static void dm_ctrl_initgain_byrssi_by_driverrssi( return; //DbgPrint("Dig by Sw Rssi \n"); - if(dm_digtable.dig_algorithm_switch) // if swithed algorithm, we have to disable FW Dig. + if(dm_digtable.dig_algorithm_switch) // if switched algorithm, we have to disable FW Dig. fw_dig = 0; if(fw_dig <= 3) // execute several times to make sure the FW Dig is disabled {// FW DIG Off @@ -2160,7 +2160,7 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm( /*DbgPrint("DIG Check\n\r RSSI=%d LOW=%d HIGH=%d STATE=%d", pHalData->UndecoratedSmoothedPWDB, DM_DigTable.RssiLowThresh, DM_DigTable.RssiHighThresh, DM_DigTable.Dig_State);*/ - /* 1. When RSSI decrease, We have to judge if it is smaller than a treshold + /* 1. When RSSI decrease, We have to judge if it is smaller than a threshold and then execute below step. */ if ((priv->undecorated_smoothed_pwdb <= dm_digtable.rssi_low_thresh)) { @@ -2220,7 +2220,7 @@ static void dm_ctrl_initgain_byrssi_by_fwfalse_alarm( } - /* 2. When RSSI increase, We have to judge if it is larger than a treshold + /* 2. When RSSI increase, We have to judge if it is larger than a threshold and then execute below step. */ if ((priv->undecorated_smoothed_pwdb >= dm_digtable.rssi_high_thresh) ) { @@ -2329,7 +2329,7 @@ static void dm_ctrl_initgain_byrssi_highpwr( } /* 3. When RSSI >75% or <70%, it is a high power issue. We have to judge if - it is larger than a treshold and then execute below step. */ + it is larger than a threshold and then execute below step. */ // 2008/02/05 MH SD3-Jerry Modify PD_TH for high power issue. if (priv->undecorated_smoothed_pwdb >= dm_digtable.rssi_high_power_highthresh) { @@ -2841,8 +2841,8 @@ static void dm_check_rfctrl_gpio(struct net_device * dev) { //struct r8192_priv *priv = ieee80211_priv(dev); - // Walk around for DTM test, we will not enable HW - radio on/off because r/w - // page 1 register before Lextra bus is enabled cause system fails when resuming + // Work around for DTM test, we will not enable HW - radio on/off because r/w + // page 1 register before extra bus is enabled causing system fails when resuming // from S4. 20080218, Emily // Stop to execute workitem to prevent S3/S4 bug. @@ -3377,13 +3377,13 @@ extern void dm_fsync_timer_callback(unsigned long data) { u32 DiffNum = priv->rateCountDiffRecord - rate_count_diff; - // Contiune count + // Continue count if(DiffNum >= priv->ieee80211->fsync_seconddiff_ratethreshold) priv->ContiuneDiffCount++; else priv->ContiuneDiffCount = 0; - // Contiune count over + // Continue count over if(priv->ContiuneDiffCount >=2) { bSwitchFromCountDiff = true; @@ -3392,7 +3392,7 @@ extern void dm_fsync_timer_callback(unsigned long data) } else { - // Stop contiune count + // Stop continue count priv->ContiuneDiffCount = 0; } @@ -3523,7 +3523,7 @@ static void dm_StartSWFsync(struct net_device *dev) RT_TRACE(COMP_HALDM,"%s\n", __FUNCTION__); // Initial rate record to zero, start to record. priv->rate_record = 0; - // Initial contiune diff count to zero, start to record. + // Initial continue diff count to zero, start to record. priv->ContiuneDiffCount = 0; priv->rateCountDiffRecord = 0; priv->bswitch_fsync = false; @@ -3875,7 +3875,7 @@ static void dm_send_rssi_tofw(struct net_device *dev) // If we test chariot, we should stop the TX command ? // Because 92E will always silent reset when we send tx command. We use register - // 0x1e0(byte) to botify driver. + // 0x1e0(byte) to notify driver. write_nic_byte(dev, DRIVER_RSSI, (u8)priv->undecorated_smoothed_pwdb); return; tx_cmd.Op = TXCMD_SET_RX_RSSI; diff --git a/drivers/staging/rtl8192u/r8192U_hw.h b/drivers/staging/rtl8192u/r8192U_hw.h index e89aaf7..b0ee4dd 100644 --- a/drivers/staging/rtl8192u/r8192U_hw.h +++ b/drivers/staging/rtl8192u/r8192U_hw.h @@ -10,7 +10,7 @@ Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver. - We want to tanks the Authors of those projects + We want to thanks the Authors of those projects and the Ndiswrapper project Authors. */ diff --git a/drivers/staging/rtl8192u/r8192U_wx.c b/drivers/staging/rtl8192u/r8192U_wx.c index 981de9b..2ce0fc8 100644 --- a/drivers/staging/rtl8192u/r8192U_wx.c +++ b/drivers/staging/rtl8192u/r8192U_wx.c @@ -13,7 +13,7 @@ Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver. - We want to tanks the Authors of those projects and the Ndiswrapper + We want to thanks the Authors of those projects and the Ndiswrapper project Authors. */ @@ -256,7 +256,7 @@ static int r8192_wx_get_ap_status(struct net_device *dev, //count the length of input ssid for(name_len=0 ; ((char*)wrqu->data.pointer)[name_len]!='\0' ; name_len++); - //search for the correspoding info which is received + //search for the corresponding info which is received list_for_each_entry(target, &ieee->network_list, list) { if ( (target->ssid_len == name_len) && (strncmp(target->ssid, (char*)wrqu->data.pointer, name_len)==0)){ @@ -419,7 +419,7 @@ static int rtl8180_wx_get_range(struct net_device *dev, range->max_qual.updated = 7; /* Updated all three */ range->avg_qual.qual = 92; /* > 8% missed beacons is 'bad' */ - /* TODO: Find real 'good' to 'bad' threshol value for RSSI */ + /* TODO: Find real 'good' to 'bad' threshold value for RSSI */ range->avg_qual.level = 20 + -98; range->avg_qual.noise = 0; range->avg_qual.updated = 7; /* Updated all three */ @@ -1047,7 +1047,7 @@ static iw_handler r8192_wx_handlers[] = #else NULL, #endif - dummy, /* SIOCGIWAPLIST -- depricated */ + dummy, /* SIOCGIWAPLIST -- deprecated */ r8192_wx_set_scan, /* SIOCSIWSCAN */ r8192_wx_get_scan, /* SIOCGIWSCAN */ r8192_wx_set_essid, /* SIOCSIWESSID */ diff --git a/drivers/staging/rtl8192u/r8192U_wx.h b/drivers/staging/rtl8192u/r8192U_wx.h index f4cf280..1388664 100644 --- a/drivers/staging/rtl8192u/r8192U_wx.h +++ b/drivers/staging/rtl8192u/r8192U_wx.h @@ -7,7 +7,7 @@ Parts of this driver are based on the rtl8180 driver skeleton from Patric Schenke & Andres Salomon Parts of this driver are based on the Intel Pro Wireless 2100 GPL driver - We want to tanks the Authors of such projects and the Ndiswrapper project Authors. + We want to thanks the Authors of such projects and the Ndiswrapper project Authors. */ /* this file (will) contains wireless extension handlers*/ diff --git a/drivers/staging/rtl8192u/r819xU_HTType.h b/drivers/staging/rtl8192u/r819xU_HTType.h index 2ac4216..e07f8b1 100644 --- a/drivers/staging/rtl8192u/r819xU_HTType.h +++ b/drivers/staging/rtl8192u/r819xU_HTType.h @@ -211,7 +211,7 @@ typedef struct _RT_HIGH_THROUGHPUT{ u8 bEnableHT; u8 bCurrentHTSupport; - u8 bRegBW40MHz; // Tx 40MHz channel capablity + u8 bRegBW40MHz; // Tx 40MHz channel capability u8 bCurBW40MHz; // Tx 40MHz channel capability u8 bRegShortGI40MHz; // Tx Short GI for 40Mhz diff --git a/drivers/staging/rtl8192u/r819xU_cmdpkt.c b/drivers/staging/rtl8192u/r819xU_cmdpkt.c index 9348f42..ec1eeb7 100644 --- a/drivers/staging/rtl8192u/r819xU_cmdpkt.c +++ b/drivers/staging/rtl8192u/r819xU_cmdpkt.c @@ -157,7 +157,7 @@ SendTxCommandPacket( seg_ptr = skb_put(skb, buffer_len); /* * Transform from little endian to big endian - * and pending zero + * and pending zero */ memcpy(seg_ptr,codevirtualaddress,buffer_len); tcb_desc->txbuf_size= (u16)buffer_len; @@ -718,15 +718,15 @@ cmpk_message_handle_rx( /* 2. Read virtual address from RFD. */ pcmd_buff = pstats->virtual_address; - /* 3. Read command pakcet element id and length. */ + /* 3. Read command packet element id and length. */ element_id = pcmd_buff[0]; /*RT_TRACE(COMP_SEND, DebugLevel, ("\n\r[CMPK]-->element ID=%d Len=%d", element_id, total_length));*/ - /* 4. Check every received command packet conent according to different + /* 4. Check every received command packet content according to different element type. Because FW may aggregate RX command packet to minimize transmit time between DRV and FW.*/ - // Add a counter to prevent to locked in the loop too long + // Add a counter to prevent the lock in the loop to be to long while (total_length > 0 || exe_cnt++ >100) { /* 2007/01/17 MH We support aggregation of different cmd in the same packet. */ diff --git a/drivers/staging/rtl8192u/r819xU_firmware.c b/drivers/staging/rtl8192u/r819xU_firmware.c index 4bb5fff..fe5776d 100644 --- a/drivers/staging/rtl8192u/r819xU_firmware.c +++ b/drivers/staging/rtl8192u/r819xU_firmware.c @@ -275,11 +275,11 @@ bool init_firmware(struct net_device *dev) /* * Download boot, main, and data image for System reset. - * Download data image for firmware reseta + * Download data image for firmware reset */ for(init_step = starting_state; init_step <= FW_INIT_STEP2_DATA; init_step++) { /* - * Open Image file, and map file to contineous memory if open file success. + * Open Image file, and map file to continuous memory if open file success. * or read image file from array. Default load from IMG file */ if(rst_opt == OPT_SYSTEM_RESET) { diff --git a/drivers/staging/rtl8192u/r819xU_phy.c b/drivers/staging/rtl8192u/r819xU_phy.c index c4586b0..636d6fd 100644 --- a/drivers/staging/rtl8192u/r819xU_phy.c +++ b/drivers/staging/rtl8192u/r819xU_phy.c @@ -40,7 +40,7 @@ static u32 RF_CHANNEL_TABLE_ZEBRA[] = { * and do register read/write * input: u32 dwBitMask //taget bit pos in the addr to be modified * output: none - * return: u32 return the shift bit bit position of the mask + * return: u32 return the shift bit position of the mask * ****************************************************************************/ u32 rtl8192_CalculateBitShift(u32 dwBitMask) { @@ -176,7 +176,7 @@ u32 rtl8192_phy_RFSerialRead(struct net_device* dev, RF90_RADIO_PATH_E eRFPath, rtl8192_setBBreg(dev, pPhyReg->rfHSSIPara2, bLSSIReadEdge, 0x1); - // TODO: we should not delay such a long time. Ask help from SD3 + // TODO: we should not delay such a long time. Ask help from SD3 msleep(1); ret = rtl8192_QueryBBReg(dev, pPhyReg->rfLSSIReadBack, bLSSIReadBackData); @@ -252,7 +252,7 @@ void rtl8192_phy_RFSerialWrite(struct net_device* dev, RF90_RADIO_PATH_E eRFPath NewOffset = Offset; } - // Put write addr in [5:0] and write data in [31:16] + // Put write addr in [5:0] and write data in [31:16] DataAndAddr = (Data<<16) | (NewOffset&0x3f); // Write Operation @@ -525,7 +525,7 @@ void rtl8192_phy_configmac(struct net_device* dev) } /****************************************************************************** - *function: This function do dirty work + *function: This function does dirty work * input: dev * output: none * return: none @@ -578,7 +578,7 @@ void rtl8192_phyConfigBB(struct net_device* dev, u8 ConfigType) void rtl8192_InitBBRFRegDef(struct net_device* dev) { struct r8192_priv *priv = ieee80211_priv(dev); -// RF Interface Sowrtware Control +// RF Interface Software Control priv->PHYRegDef[RF90_PATH_A].rfintfs = rFPGA0_XAB_RFInterfaceSW; // 16 LSBs if read 32-bit from 0x870 priv->PHYRegDef[RF90_PATH_B].rfintfs = rFPGA0_XAB_RFInterfaceSW; // 16 MSBs if read 32-bit from 0x870 (16-bit for 0x872) priv->PHYRegDef[RF90_PATH_C].rfintfs = rFPGA0_XCD_RFInterfaceSW;// 16 LSBs if read 32-bit from 0x874 @@ -602,7 +602,7 @@ void rtl8192_InitBBRFRegDef(struct net_device* dev) priv->PHYRegDef[RF90_PATH_C].rfintfe = rFPGA0_XC_RFInterfaceOE;// 16 MSBs if read 32-bit from 0x86A (16-bit for 0x86A) priv->PHYRegDef[RF90_PATH_D].rfintfe = rFPGA0_XD_RFInterfaceOE;// 16 MSBs if read 32-bit from 0x86C (16-bit for 0x86E) - //Addr of LSSI. Wirte RF register by driver + //Addr of LSSI. Write RF register by driver priv->PHYRegDef[RF90_PATH_A].rf3wireOffset = rFPGA0_XA_LSSIParameter; //LSSI Parameter priv->PHYRegDef[RF90_PATH_B].rf3wireOffset = rFPGA0_XB_LSSIParameter; priv->PHYRegDef[RF90_PATH_C].rf3wireOffset = rFPGA0_XC_LSSIParameter; @@ -1384,7 +1384,7 @@ u8 rtl8192_phy_SwChnlStepByStep(struct net_device *dev, u8 channel, u8* stage, u } /****************************************************************************** - *function: This function does acturally set channel work + *function: This function does actually set channel work * input: struct net_device *dev * u8 channel * output: none @@ -1425,7 +1425,7 @@ void rtl8192_SwChnl_WorkItem(struct net_device *dev) } /****************************************************************************** - *function: This function scheduled actural workitem to set channel + *function: This function scheduled actual workitem to set channel * input: net_device dev * u8 channel //channel to set * output: none diff --git a/drivers/staging/rtl8192u/r819xU_phyreg.h b/drivers/staging/rtl8192u/r819xU_phyreg.h index 06b0b53..50f24dc 100644 --- a/drivers/staging/rtl8192u/r819xU_phyreg.h +++ b/drivers/staging/rtl8192u/r819xU_phyreg.h @@ -443,7 +443,7 @@ #define bCCKRxIG 0x7f00 #define bCCKLNAPolarity 0x800000 #define bCCKRx1stGain 0x7f0000 -#define bCCKRFExtend 0x20000000 //CCK Rx Iinital gain polarity +#define bCCKRFExtend 0x20000000 //CCK Rx inital gain polarity #define bCCKRxAGCSatLevel 0x1f000000 #define bCCKRxAGCSatCount 0xe0 #define bCCKRxRFSettle 0x1f //AGCsamp_dly