From: Rajnesh Kanwal Date: Mon, 13 Jun 2022 15:31:40 +0000 (+0100) Subject: pvr: Implement vkCmdBlitImage API. X-Git-Tag: upstream/23.3.3~9827 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=5827f0098c9c455f263c1ba7dfb526c15717c4ed;p=platform%2Fupstream%2Fmesa.git pvr: Implement vkCmdBlitImage API. Signed-off-by: Rajnesh Kanwal Acked-by: Karmjit Mahil Part-of: --- diff --git a/src/imagination/vulkan/pvr_blit.c b/src/imagination/vulkan/pvr_blit.c index f4d8651..bc3814b 100644 --- a/src/imagination/vulkan/pvr_blit.c +++ b/src/imagination/vulkan/pvr_blit.c @@ -46,12 +46,6 @@ /* TODO: Investigate where this limit comes from. */ #define PVR_MAX_TRANSFER_SIZE_IN_TEXELS 2048U -void pvr_CmdBlitImage2KHR(VkCommandBuffer commandBuffer, - const VkBlitImageInfo2 *pBlitImageInfo) -{ - assert(!"Unimplemented"); -} - void pvr_CmdCopyImageToBuffer2KHR( VkCommandBuffer commandBuffer, const VkCopyImageToBufferInfo2 *pCopyImageToBufferInfo) @@ -181,6 +175,196 @@ static void pvr_setup_transfer_surface(struct pvr_device *device, rect->extent.height = extent->height; } +void pvr_CmdBlitImage2KHR(VkCommandBuffer commandBuffer, + const VkBlitImageInfo2KHR *pBlitImageInfo) +{ + PVR_FROM_HANDLE(pvr_cmd_buffer, cmd_buffer, commandBuffer); + PVR_FROM_HANDLE(pvr_image, src, pBlitImageInfo->srcImage); + PVR_FROM_HANDLE(pvr_image, dst, pBlitImageInfo->dstImage); + struct pvr_device *device = cmd_buffer->device; + enum pvr_filter filter = PVR_FILTER_DONTCARE; + + PVR_CHECK_COMMAND_BUFFER_BUILDING_STATE(cmd_buffer); + + if (pBlitImageInfo->filter == VK_FILTER_LINEAR) + filter = PVR_FILTER_LINEAR; + + for (uint32_t i = 0U; i < pBlitImageInfo->regionCount; i++) { + const VkImageBlit2 *region = &pBlitImageInfo->pRegions[i]; + + assert(region->srcSubresource.layerCount == + region->dstSubresource.layerCount); + const bool inverted_dst_z = + (region->dstOffsets[1].z < region->dstOffsets[0].z); + const bool inverted_src_z = + (region->srcOffsets[1].z < region->srcOffsets[0].z); + const uint32_t min_src_z = inverted_src_z ? region->srcOffsets[1].z + : region->srcOffsets[0].z; + const uint32_t max_src_z = inverted_src_z ? region->srcOffsets[0].z + : region->srcOffsets[1].z; + const uint32_t min_dst_z = inverted_dst_z ? region->dstOffsets[1].z + : region->dstOffsets[0].z; + const uint32_t max_dst_z = inverted_dst_z ? region->dstOffsets[0].z + : region->dstOffsets[1].z; + + const uint32_t src_width = + region->srcOffsets[1].x - region->srcOffsets[0].x; + const uint32_t src_height = + region->srcOffsets[1].y - region->srcOffsets[0].y; + const uint32_t dst_width = + region->dstOffsets[1].x - region->dstOffsets[0].x; + const uint32_t dst_height = + region->dstOffsets[1].y - region->dstOffsets[0].y; + + float initial_depth_offset; + VkExtent3D src_extent; + VkExtent3D dst_extent; + float z_slice_stride; + + /* If any of the extent regions is zero, then reject the blit and + * continue. + */ + if (!src_width || !src_height || !dst_width || !dst_height || + !(max_dst_z - min_dst_z) || !(max_src_z - min_src_z)) { + mesa_loge("BlitImage: Region %i has an area of zero", i); + continue; + } + + src_extent = (VkExtent3D){ + .width = src_width, + .height = src_height, + .depth = 0U, + }; + + dst_extent = (VkExtent3D){ + .width = dst_width, + .height = dst_height, + .depth = 0U, + }; + + /* The z_position of a transfer surface is intended to be in the range + * of 0.0f <= z_position <= depth. It will be used as a texture coordinate + * in the source surface for cases where linear filtering is enabled, so + * the fractional part will need to represent the exact midpoint of a z + * slice range in the source texture, as it maps to each destination + * slice. + * + * For destination surfaces, the fractional part is discarded, so + * we can safely pass the slice index. + */ + + /* Calculate the ratio of z slices in our source region to that of our + * destination region, to get the number of z slices in our source region + * to iterate over for each destination slice. + * + * If our destination region is inverted, we iterate backwards. + */ + z_slice_stride = + (inverted_dst_z ? -1.0f : 1.0f) * + ((float)(max_src_z - min_src_z) / (float)(max_dst_z - min_dst_z)); + + /* Offset the initial depth offset by half of the z slice stride, into the + * blit region's z range. + */ + initial_depth_offset = + (inverted_dst_z ? max_src_z : min_src_z) + (0.5f * z_slice_stride); + + for (uint32_t j = 0U; j < region->srcSubresource.layerCount; j++) { + struct pvr_transfer_cmd_surface src_surface = { 0 }; + struct pvr_transfer_cmd_surface dst_surface = { 0 }; + VkRect2D src_rect; + VkRect2D dst_rect; + + /* Get the subresource info for the src and dst images, this is + * required when incrementing the address of the depth slice used by + * the transfer surface. + */ + VkSubresourceLayout src_info, dst_info; + const VkImageSubresource src_sub_resource = { + .aspectMask = region->srcSubresource.aspectMask, + .mipLevel = region->srcSubresource.mipLevel, + .arrayLayer = region->srcSubresource.baseArrayLayer + j, + }; + const VkImageSubresource dst_sub_resource = { + .aspectMask = region->dstSubresource.aspectMask, + .mipLevel = region->dstSubresource.mipLevel, + .arrayLayer = region->dstSubresource.baseArrayLayer + j, + }; + + pvr_get_image_subresource_layout(src, &src_sub_resource, &src_info); + pvr_get_image_subresource_layout(dst, &dst_sub_resource, &dst_info); + + /* Setup the transfer surfaces once per image layer, which saves us + * from repeating subresource queries by manually incrementing the + * depth slices. + */ + pvr_setup_transfer_surface(device, + &src_surface, + &src_rect, + src, + region->srcSubresource.baseArrayLayer + j, + region->srcSubresource.mipLevel, + ®ion->srcOffsets[0], + &src_extent, + initial_depth_offset, + src->vk.format, + region->srcSubresource.aspectMask); + + pvr_setup_transfer_surface(device, + &dst_surface, + &dst_rect, + dst, + region->dstSubresource.baseArrayLayer + j, + region->dstSubresource.mipLevel, + ®ion->dstOffsets[0], + &dst_extent, + min_dst_z, + dst->vk.format, + region->dstSubresource.aspectMask); + + for (uint32_t dst_z = min_dst_z; dst_z < max_dst_z; dst_z++) { + struct pvr_transfer_cmd *transfer_cmd; + VkResult result; + + /* TODO: See if we can allocate all the transfer cmds in one go. */ + transfer_cmd = pvr_transfer_cmd_alloc(cmd_buffer); + if (!transfer_cmd) + return; + + transfer_cmd->mappings[0].src_rect = src_rect; + transfer_cmd->mappings[0].dst_rect = dst_rect; + transfer_cmd->mapping_count++; + + transfer_cmd->src = src_surface; + transfer_cmd->src_present = true; + + transfer_cmd->dst = dst_surface; + transfer_cmd->scissor = dst_rect; + + transfer_cmd->filter = filter; + + result = pvr_cmd_buffer_add_transfer_cmd(cmd_buffer, transfer_cmd); + if (result != VK_SUCCESS) { + vk_free(&cmd_buffer->vk.pool->alloc, transfer_cmd); + return; + } + + if (src_surface.mem_layout == PVR_MEMLAYOUT_3DTWIDDLED) { + src_surface.z_position += z_slice_stride; + } else { + src_surface.dev_addr.addr += + src_info.depthPitch * ((uint32_t)z_slice_stride); + } + + if (dst_surface.mem_layout == PVR_MEMLAYOUT_3DTWIDDLED) + dst_surface.z_position += 1.0f; + else + dst_surface.dev_addr.addr += dst_info.depthPitch; + } + } + } +} + static VkFormat pvr_get_copy_format(VkFormat format) { switch (format) {