From: Robert Hancock Date: Sat, 13 Feb 2021 00:17:48 +0000 (-0600) Subject: net: axienet: Handle deferred probe on clock properly X-Git-Tag: v5.15~1635^2~21^2~22 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=57baf8cc70ea4cf5503c9d42f31f6a86d7f5ff1a;p=platform%2Fkernel%2Flinux-starfive.git net: axienet: Handle deferred probe on clock properly This driver is set up to use a clock mapping in the device tree if it is present, but still work without one for backward compatibility. However, if getting the clock returns -EPROBE_DEFER, then we need to abort and return that error from our driver initialization so that the probe can be retried later after the clock is set up. Move clock initialization to earlier in the process so we do not waste as much effort if the clock is not yet available. Switch to use devm_clk_get_optional and abort initialization on any error reported. Also enable the clock regardless of whether the controller is using an MDIO bus, as the clock is required in any case. Fixes: 09a0354cadec267be7f ("net: axienet: Use clock framework to get device clock rate") Signed-off-by: Robert Hancock Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c index 6fea980..b4a0bfc 100644 --- a/drivers/net/ethernet/xilinx/xilinx_axienet_main.c +++ b/drivers/net/ethernet/xilinx/xilinx_axienet_main.c @@ -1817,6 +1817,18 @@ static int axienet_probe(struct platform_device *pdev) lp->options = XAE_OPTION_DEFAULTS; lp->rx_bd_num = RX_BD_NUM_DEFAULT; lp->tx_bd_num = TX_BD_NUM_DEFAULT; + + lp->clk = devm_clk_get_optional(&pdev->dev, NULL); + if (IS_ERR(lp->clk)) { + ret = PTR_ERR(lp->clk); + goto free_netdev; + } + ret = clk_prepare_enable(lp->clk); + if (ret) { + dev_err(&pdev->dev, "Unable to enable clock: %d\n", ret); + goto free_netdev; + } + /* Map device registers */ ethres = platform_get_resource(pdev, IORESOURCE_MEM, 0); lp->regs = devm_ioremap_resource(&pdev->dev, ethres); @@ -1992,20 +2004,6 @@ static int axienet_probe(struct platform_device *pdev) lp->phy_node = of_parse_phandle(pdev->dev.of_node, "phy-handle", 0); if (lp->phy_node) { - lp->clk = devm_clk_get(&pdev->dev, NULL); - if (IS_ERR(lp->clk)) { - dev_warn(&pdev->dev, "Failed to get clock: %ld\n", - PTR_ERR(lp->clk)); - lp->clk = NULL; - } else { - ret = clk_prepare_enable(lp->clk); - if (ret) { - dev_err(&pdev->dev, "Unable to enable clock: %d\n", - ret); - goto free_netdev; - } - } - ret = axienet_mdio_setup(lp); if (ret) dev_warn(&pdev->dev,