From: Rui Miguel Silva Date: Wed, 21 Oct 2020 21:25:41 +0000 (+0200) Subject: media: dt-bindings: ov2680: convert bindings to yaml X-Git-Tag: accepted/tizen/unified/20230118.172025~8355^2~253 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=57226cd8c8bf14e2dfcb3deb4e44bb74ccdafda2;p=platform%2Fkernel%2Flinux-rpi.git media: dt-bindings: ov2680: convert bindings to yaml Convert ov2680 sensor bindings documentation to yaml schema, remove the textual bindings document and update MAINTAINERS entry. Signed-off-by: Rui Miguel Silva Reviewed-by: Jacopo Mondi Reviewed-by: Rob Herring Signed-off-by: Sakari Ailus Signed-off-by: Mauro Carvalho Chehab --- diff --git a/Documentation/devicetree/bindings/media/i2c/ov2680.txt b/Documentation/devicetree/bindings/media/i2c/ov2680.txt deleted file mode 100644 index 11e925e..0000000 --- a/Documentation/devicetree/bindings/media/i2c/ov2680.txt +++ /dev/null @@ -1,46 +0,0 @@ -* Omnivision OV2680 MIPI CSI-2 sensor - -Required Properties: -- compatible: should be "ovti,ov2680". -- clocks: reference to the xvclk input clock. -- clock-names: should be "xvclk". -- DOVDD-supply: Digital I/O voltage supply. -- DVDD-supply: Digital core voltage supply. -- AVDD-supply: Analog voltage supply. - -Optional Properties: -- reset-gpios: reference to the GPIO connected to the powerdown/reset pin, - if any. This is an active low signal to the OV2680. - -The device node must contain one 'port' child node for its digital output -video port, and this port must have a single endpoint in accordance with - the video interface bindings defined in -Documentation/devicetree/bindings/media/video-interfaces.txt. - -Endpoint node required properties for CSI-2 connection are: -- remote-endpoint: a phandle to the bus receiver's endpoint node. -- clock-lanes: should be set to <0> (clock lane on hardware lane 0). -- data-lanes: should be set to <1> (one CSI-2 lane supported). - -Example: - -&i2c2 { - ov2680: camera-sensor@36 { - compatible = "ovti,ov2680"; - reg = <0x36>; - clocks = <&osc>; - clock-names = "xvclk"; - reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; - DOVDD-supply = <&sw2_reg>; - DVDD-supply = <&sw2_reg>; - AVDD-supply = <®_peri_3p15v>; - - port { - ov2680_to_mipi: endpoint { - remote-endpoint = <&mipi_from_sensor>; - clock-lanes = <0>; - data-lanes = <1>; - }; - }; - }; -}; diff --git a/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml b/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml new file mode 100644 index 0000000..43bf749 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ovti,ov2680.yaml @@ -0,0 +1,99 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/i2c/ovti,ov2680.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Omnivision OV2680 CMOS Sensor + +maintainers: + - Rui Miguel Silva + +description: |- + The OV2680 color sensor is a low voltage, high performance 1/5 inch UXGA (2 + megapixel) CMOS image sensor that provides a single-chip UXGA (1600 x 1200) + camera. It provides full-frame, sub-sampled, or windowed 10-bit images in + various formats via the control of the Serial Camera Control Bus (SCCB) + interface. The OV2680 has an image array capable of operating at up to 30 + frames per second (fps) in UXGA resolution. + +properties: + compatible: + const: ovti,ov2680 + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + clock-names: + const: xvclk + + reset-gpios: + description: + The phandle and specifier for the GPIO that controls sensor reset. + This corresponds to the hardware pin XSHUTDOWN which is physically + active low. + maxItems: 1 + + dovdd-supply: + description: + Definition of the regulator used as interface power supply. + + avdd-supply: + description: + Definition of the regulator used as analog power supply. + + dvdd-supply: + description: + Definition of the regulator used as digital power supply. + + port: + type: object + description: + A node containing an output port node with an endpoint definition + as documented in + Documentation/devicetree/bindings/media/video-interfaces.txt + +required: + - compatible + - reg + - clocks + - clock-names + - dovdd-supply + - avdd-supply + - dvdd-supply + - reset-gpios + - port + +additionalProperties: false + +examples: + - | + #include + + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ov2680: camera-sensor@36 { + compatible = "ovti,ov2680"; + reg = <0x36>; + clocks = <&osc>; + clock-names = "xvclk"; + reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + + dovdd-supply = <&sw2_reg>; + dvdd-supply = <&sw2_reg>; + avdd-supply = <®_peri_3p15v>; + + port { + ov2680_to_mipi: endpoint { + remote-endpoint = <&mipi_from_sensor>; + }; + }; + }; + }; + +... diff --git a/MAINTAINERS b/MAINTAINERS index 20e4afc..551def3 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -12889,7 +12889,7 @@ M: Rui Miguel Silva L: linux-media@vger.kernel.org S: Maintained T: git git://linuxtv.org/media_tree.git -F: Documentation/devicetree/bindings/media/i2c/ov2680.txt +F: Documentation/devicetree/bindings/media/i2c/ov2680.yaml F: drivers/media/i2c/ov2680.c OMNIVISION OV2685 SENSOR DRIVER