From: Hans de Goede Date: Sun, 13 May 2018 07:24:31 +0000 (+0200) Subject: ASoC: Intel: bytcr_rt5640: Add default jack-detect settings X-Git-Tag: v4.19~773^2~15^2~84 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=56ff44094501787e5901669d6e880ca2065206fe;p=platform%2Fkernel%2Flinux-rpi.git ASoC: Intel: bytcr_rt5640: Add default jack-detect settings Out of the 11 BYTCR devices which I have access to for testing, 6 use JD1IN4P for jack-detect, 2 use JD1IN4P non-inverted and the other 3 use JD2IN4N, the ones not using JD1IN4P are all also special in other ways and need a DMI quirk regardless. All 5 BYT (non CR) devices which I have access to use JD2IN4N. Signed-off-by: Hans de Goede Acked-by: Pierre-Louis Bossart Signed-off-by: Mark Brown --- diff --git a/sound/soc/intel/boards/bytcr_rt5640.c b/sound/soc/intel/boards/bytcr_rt5640.c index 355c241..b00f21e 100644 --- a/sound/soc/intel/boards/bytcr_rt5640.c +++ b/sound/soc/intel/boards/bytcr_rt5640.c @@ -84,6 +84,9 @@ enum { #define BYTCR_INPUT_DEFAULTS \ (BYT_RT5640_IN3_MAP | \ + BYT_RT5640_JD_SRC_JD1_IN4P | \ + BYT_RT5640_OVCD_TH_2000UA | \ + BYT_RT5640_OVCD_SF_0P75 | \ BYT_RT5640_DIFF_MIC) /* in-diff or dmic-pin + jdsrc + ovcd-th + -sf + jd-inv + terminating entry */ @@ -985,7 +988,10 @@ static int snd_byt_rt5640_mc_probe(struct platform_device *pdev) /* change defaults for Baytrail-CR capture */ byt_rt5640_quirk |= BYTCR_INPUT_DEFAULTS; } else { - byt_rt5640_quirk |= BYT_RT5640_DMIC1_MAP; + byt_rt5640_quirk |= BYT_RT5640_DMIC1_MAP | + BYT_RT5640_JD_SRC_JD2_IN4N | + BYT_RT5640_OVCD_TH_2000UA | + BYT_RT5640_OVCD_SF_0P75; } /* check quirks before creating card */