From: Juergen Kilb <J.Kilb@phytec.de>
Date: Thu, 14 Apr 2011 07:31:43 +0000 (+0200)
Subject: mfd: Fixed gpio polarity of omap-usb gpio USB-phy reset
X-Git-Tag: upstream/snapshot3+hdmi~10479^2~2
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=557f447f21621de9c5447c8702c33b53279822ce;p=platform%2Fadaptation%2Frenesas_rcar%2Frenesas_kernel.git

mfd: Fixed gpio polarity of omap-usb gpio USB-phy reset

With commit 19403165 a main part of ehci-omap.c moved to
drivers/mfd/omap-usb-host.c created by commit 17cdd29d.
Due to this reorganisation the polarity used to reset the
external USB phy changed and USB host doesn't recognize
any devices.

Signed-off-by: Juergen Kilb <J.Kilb@phytec.de>
Acked-by: Felipe Balbi <balbi@ti.com>
Tested-by: Steve Sakoman <steve@sakoman.com>
Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
---

diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c
index 2e16511..3ab9ffa 100644
--- a/drivers/mfd/omap-usb-host.c
+++ b/drivers/mfd/omap-usb-host.c
@@ -717,14 +717,14 @@ static int usbhs_enable(struct device *dev)
 			gpio_request(pdata->ehci_data->reset_gpio_port[0],
 						"USB1 PHY reset");
 			gpio_direction_output
-				(pdata->ehci_data->reset_gpio_port[0], 1);
+				(pdata->ehci_data->reset_gpio_port[0], 0);
 		}
 
 		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1])) {
 			gpio_request(pdata->ehci_data->reset_gpio_port[1],
 						"USB2 PHY reset");
 			gpio_direction_output
-				(pdata->ehci_data->reset_gpio_port[1], 1);
+				(pdata->ehci_data->reset_gpio_port[1], 0);
 		}
 
 		/* Hold the PHY in RESET for enough time till DIR is high */
@@ -904,11 +904,11 @@ static int usbhs_enable(struct device *dev)
 
 		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[0]))
 			gpio_set_value
-				(pdata->ehci_data->reset_gpio_port[0], 0);
+				(pdata->ehci_data->reset_gpio_port[0], 1);
 
 		if (gpio_is_valid(pdata->ehci_data->reset_gpio_port[1]))
 			gpio_set_value
-				(pdata->ehci_data->reset_gpio_port[1], 0);
+				(pdata->ehci_data->reset_gpio_port[1], 1);
 	}
 
 end_count: