From: Martin Fuzzey <martin.fuzzey@flowbird.group>
Date: Fri, 16 Jun 2023 10:47:23 +0000 (+0200)
Subject: tty: serial: imx: fix rs485 rx after tx
X-Git-Tag: v6.1.52~1165
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=5553d587a371326644d5d59bb4ff88f9d6ac76ed;p=platform%2Fkernel%2Flinux-starfive.git

tty: serial: imx: fix rs485 rx after tx

commit 639949a7031e04c59ec91614eceb9543e9120f43 upstream.

Since commit 79d0224f6bf2 ("tty: serial: imx: Handle RS485 DE signal
active high") RS485 reception no longer works after a transmission.

The following scenario shows the problem:
	1) Open a port in RS485 mode
	2) Receive data from remote (OK)
	3) Transmit data to remote (OK)
	4) Receive data from remote (Nothing received)

In RS485 mode, imx_uart_start_tx() calls imx_uart_stop_rx() and, when the
transmission is complete, imx_uart_stop_tx() calls imx_uart_start_rx().

Since the above commit imx_uart_stop_rx() now sets the loopback bit but
imx_uart_start_rx() does not clear it causing the hardware to remain in
loopback mode and not receive external data.

Fix this by moving the existing loopback disable code to a helper function
and calling it from imx_uart_start_rx() too.

Fixes: 79d0224f6bf2 ("tty: serial: imx: Handle RS485 DE signal active high")
Cc: stable@vger.kernel.org
Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Link: https://lore.kernel.org/r/20230616104838.2729694-1-martin.fuzzey@flowbird.group
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---

diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c
index f07c4f9ff13c..d2137f6eff32 100644
--- a/drivers/tty/serial/imx.c
+++ b/drivers/tty/serial/imx.c
@@ -397,6 +397,16 @@ static void start_hrtimer_ms(struct hrtimer *hrt, unsigned long msec)
        hrtimer_start(hrt, ms_to_ktime(msec), HRTIMER_MODE_REL);
 }
 
+static void imx_uart_disable_loopback_rs485(struct imx_port *sport)
+{
+	unsigned int uts;
+
+	/* See SER_RS485_ENABLED/UTS_LOOP comment in imx_uart_probe() */
+	uts = imx_uart_readl(sport, imx_uart_uts_reg(sport));
+	uts &= ~UTS_LOOP;
+	imx_uart_writel(sport, uts, imx_uart_uts_reg(sport));
+}
+
 /* called with port.lock taken and irqs off */
 static void imx_uart_start_rx(struct uart_port *port)
 {
@@ -418,6 +428,7 @@ static void imx_uart_start_rx(struct uart_port *port)
 	/* Write UCR2 first as it includes RXEN */
 	imx_uart_writel(sport, ucr2, UCR2);
 	imx_uart_writel(sport, ucr1, UCR1);
+	imx_uart_disable_loopback_rs485(sport);
 }
 
 /* called with port.lock taken and irqs off */
@@ -1404,7 +1415,7 @@ static int imx_uart_startup(struct uart_port *port)
 	int retval, i;
 	unsigned long flags;
 	int dma_is_inited = 0;
-	u32 ucr1, ucr2, ucr3, ucr4, uts;
+	u32 ucr1, ucr2, ucr3, ucr4;
 
 	retval = clk_prepare_enable(sport->clk_per);
 	if (retval)
@@ -1509,10 +1520,7 @@ static int imx_uart_startup(struct uart_port *port)
 		imx_uart_writel(sport, ucr2, UCR2);
 	}
 
-	/* See SER_RS485_ENABLED/UTS_LOOP comment in imx_uart_probe() */
-	uts = imx_uart_readl(sport, imx_uart_uts_reg(sport));
-	uts &= ~UTS_LOOP;
-	imx_uart_writel(sport, uts, imx_uart_uts_reg(sport));
+	imx_uart_disable_loopback_rs485(sport);
 
 	spin_unlock_irqrestore(&sport->port.lock, flags);