From: Franky Lin <frankyl@broadcom.com>
Date: Wed, 25 Sep 2013 11:05:43 +0000 (+0200)
Subject: brcmfmac: reserve memory for bus layer in sk_buff::cb
X-Git-Tag: submit/tizen/20160607.132125~5677^2~225^2~20
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=5491c11c67f2c83c95fa9a26172bc1994580aed7;p=sdk%2Femulator%2Femulator-kernel.git

brcmfmac: reserve memory for bus layer in sk_buff::cb

Bus layer need to share sk_buff::cb with firmware signal feature. Reserve
necessary memory so they won't overwrite each other.

Reviewed-by: Arend Van Spriel <arend@broadcom.com>
Reviewed-by: Pieter-Paul Giesberts <pieterpg@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
---

diff --git a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
index 1aa75d5..f9ba4d0 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c
@@ -1786,10 +1786,15 @@ brcmf_sdbrcm_wait_event_wakeup(struct brcmf_sdio *bus)
 	return;
 }
 
+/**
+ * struct brcmf_skbuff_cb reserves first two bytes in sk_buff::cb for
+ * bus layer usage.
+ */
 /* flag marking a dummy skb added for DMA alignment requirement */
-#define DUMMY_SKB_FLAG		0x10000
+#define ALIGN_SKB_FLAG		0x8000
 /* bit mask of data length chopped from the previous packet */
-#define DUMMY_SKB_CHOP_LEN_MASK	0xffff
+#define ALIGN_SKB_CHOP_LEN_MASK	0x7fff
+
 /**
  * brcmf_sdio_txpkt_prep - packet preparation for transmit
  * @bus: brcmf_sdio structure pointer
@@ -1854,7 +1859,7 @@ brcmf_sdio_txpkt_prep(struct brcmf_sdio *bus, struct sk_buff_head *pktq,
 		memcpy(pkt_new->data,
 		       pkt_next->data + pkt_next->len - tail_chop,
 		       tail_chop);
-		*(u32 *)(pkt_new->cb) = DUMMY_SKB_FLAG + tail_chop;
+		*(u32 *)(pkt_new->cb) = ALIGN_SKB_FLAG + tail_chop;
 		skb_trim(pkt_next, pkt_next->len - tail_chop);
 		__skb_queue_after(pktq, pkt_next, pkt_new);
 	} else {
@@ -1908,8 +1913,8 @@ brcmf_sdio_txpkt_postp(struct brcmf_sdio *bus, struct sk_buff_head *pktq)
 
 	skb_queue_walk_safe(pktq, pkt_next, tmp) {
 		dummy_flags = *(u32 *)(pkt_next->cb);
-		if (dummy_flags & DUMMY_SKB_FLAG) {
-			chop_len = dummy_flags & DUMMY_SKB_CHOP_LEN_MASK;
+		if (dummy_flags & ALIGN_SKB_FLAG) {
+			chop_len = dummy_flags & ALIGN_SKB_CHOP_LEN_MASK;
 			if (chop_len) {
 				pkt_prev = pkt_next->prev;
 				memcpy(pkt_prev->data + pkt_prev->len,
diff --git a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
index 82f9140..d0cd0bf 100644
--- a/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
+++ b/drivers/net/wireless/brcm80211/brcmfmac/fwsignal.c
@@ -168,6 +168,7 @@ enum brcmf_fws_skb_state {
 /**
  * struct brcmf_skbuff_cb - control buffer associated with skbuff.
  *
+ * @bus_flags: 2 bytes reserved for bus specific parameters
  * @if_flags: holds interface index and packet related flags.
  * @htod: host to device packet identifier (used in PKTTAG tlv).
  * @state: transmit state of the packet.
@@ -177,6 +178,7 @@ enum brcmf_fws_skb_state {
  * provides 48 bytes of storage so this structure should not exceed that.
  */
 struct brcmf_skbuff_cb {
+	u16 bus_flags;
 	u16 if_flags;
 	u32 htod;
 	enum brcmf_fws_skb_state state;