From: Mark Rustad Date: Sat, 8 Aug 2015 23:18:38 +0000 (-0700) Subject: ixgbe: Add logic to reset CS4227 when needed X-Git-Tag: v4.14-rc1~4436^2~279^2~13 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=542b6eecf4c3640f15a84ff89525131d421e7c8c;p=platform%2Fkernel%2Flinux-rpi.git ixgbe: Add logic to reset CS4227 when needed On some hardware platforms, the CS4227 does not initialize properly. Detect those cases and reset it appropriately. Signed-off-by: Mark Rustad Tested-by: Phil Schmitt Signed-off-by: Jeff Kirsher --- diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h index 85e142cf..5abd66c 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h @@ -81,14 +81,29 @@ #define IXGBE_I2C_EEPROM_STATUS_FAIL 0x2 #define IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS 0x3 #define IXGBE_CS4227 0xBE /* CS4227 address */ +#define IXGBE_CS4227_SCRATCH 2 +#define IXGBE_CS4227_RESET_PENDING 0x1357 +#define IXGBE_CS4227_RESET_COMPLETE 0x5AA5 +#define IXGBE_CS4227_RETRIES 15 +#define IXGBE_CS4227_EFUSE_STATUS 0x0181 #define IXGBE_CS4227_LINE_SPARE22_MSB 0x12AD /* Reg to set speed */ #define IXGBE_CS4227_LINE_SPARE24_LSB 0x12B0 /* Reg to set EDC */ #define IXGBE_CS4227_HOST_SPARE22_MSB 0x1AAD /* Reg to set speed */ #define IXGBE_CS4227_HOST_SPARE24_LSB 0x1AB0 /* Reg to program EDC */ +#define IXGBE_CS4227_EEPROM_STATUS 0x5001 +#define IXGBE_CS4227_EEPROM_LOAD_OK 0x0001 #define IXGBE_CS4227_SPEED_1G 0x8000 #define IXGBE_CS4227_SPEED_10G 0 #define IXGBE_CS4227_EDC_MODE_CX1 0x0002 #define IXGBE_CS4227_EDC_MODE_SR 0x0004 +#define IXGBE_CS4227_EDC_MODE_DIAG 0x0008 +#define IXGBE_CS4227_RESET_HOLD 500 /* microseconds */ +#define IXGBE_CS4227_RESET_DELAY 500 /* milliseconds */ +#define IXGBE_CS4227_CHECK_DELAY 30 /* milliseconds */ +#define IXGBE_PE 0xE0 /* Port expander addr */ +#define IXGBE_PE_OUTPUT 1 /* Output reg offset */ +#define IXGBE_PE_CONFIG 3 /* Config reg offset */ +#define IXGBE_PE_BIT1 (1 << 1) /* Flow control defines */ #define IXGBE_TAF_SYM_PAUSE 0x400 diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c index 970dc6a..5048b90 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_x550.c @@ -56,6 +56,283 @@ static void ixgbe_setup_mux_ctl(struct ixgbe_hw *hw) IXGBE_WRITE_FLUSH(hw); } +/** + * ixgbe_read_cs4227 - Read CS4227 register + * @hw: pointer to hardware structure + * @reg: register number to write + * @value: pointer to receive value read + * + * Returns status code + */ +static s32 ixgbe_read_cs4227(struct ixgbe_hw *hw, u16 reg, u16 *value) +{ + return hw->phy.ops.read_i2c_combined_unlocked(hw, IXGBE_CS4227, reg, + value); +} + +/** + * ixgbe_write_cs4227 - Write CS4227 register + * @hw: pointer to hardware structure + * @reg: register number to write + * @value: value to write to register + * + * Returns status code + */ +static s32 ixgbe_write_cs4227(struct ixgbe_hw *hw, u16 reg, u16 value) +{ + return hw->phy.ops.write_i2c_combined_unlocked(hw, IXGBE_CS4227, reg, + value); +} + +/** + * ixgbe_check_cs4227_reg - Perform diag on a CS4227 register + * @hw: pointer to hardware structure + * @reg: the register to check + * + * Performs a diagnostic on a register in the CS4227 chip. Returns an error + * if it is not operating correctly. + * This function assumes that the caller has acquired the proper semaphore. + */ +static s32 ixgbe_check_cs4227_reg(struct ixgbe_hw *hw, u16 reg) +{ + s32 status; + u32 retry; + u16 reg_val; + + reg_val = (IXGBE_CS4227_EDC_MODE_DIAG << 1) | 1; + status = ixgbe_write_cs4227(hw, reg, reg_val); + if (status) + return status; + for (retry = 0; retry < IXGBE_CS4227_RETRIES; retry++) { + msleep(IXGBE_CS4227_CHECK_DELAY); + reg_val = 0xFFFF; + ixgbe_read_cs4227(hw, reg, ®_val); + if (!reg_val) + break; + } + if (reg_val) { + hw_err(hw, "CS4227 reg 0x%04X failed diagnostic\n", reg); + return status; + } + + return 0; +} + +/** + * ixgbe_get_cs4227_status - Return CS4227 status + * @hw: pointer to hardware structure + * + * Performs a diagnostic on the CS4227 chip. Returns an error if it is + * not operating correctly. + * This function assumes that the caller has acquired the proper semaphore. + */ +static s32 ixgbe_get_cs4227_status(struct ixgbe_hw *hw) +{ + s32 status; + u16 value = 0; + + /* Exit if the diagnostic has already been performed. */ + status = ixgbe_read_cs4227(hw, IXGBE_CS4227_SCRATCH, &value); + if (status) + return status; + if (value == IXGBE_CS4227_RESET_COMPLETE) + return 0; + + /* Check port 0. */ + status = ixgbe_check_cs4227_reg(hw, IXGBE_CS4227_LINE_SPARE24_LSB); + if (status) + return status; + + status = ixgbe_check_cs4227_reg(hw, IXGBE_CS4227_HOST_SPARE24_LSB); + if (status) + return status; + + /* Check port 1. */ + status = ixgbe_check_cs4227_reg(hw, IXGBE_CS4227_LINE_SPARE24_LSB + + (1 << 12)); + if (status) + return status; + + return ixgbe_check_cs4227_reg(hw, IXGBE_CS4227_HOST_SPARE24_LSB + + (1 << 12)); +} + +/** + * ixgbe_read_pe - Read register from port expander + * @hw: pointer to hardware structure + * @reg: register number to read + * @value: pointer to receive read value + * + * Returns status code + */ +static s32 ixgbe_read_pe(struct ixgbe_hw *hw, u8 reg, u8 *value) +{ + s32 status; + + status = ixgbe_read_i2c_byte_generic_unlocked(hw, reg, IXGBE_PE, value); + if (status) + hw_err(hw, "port expander access failed with %d\n", status); + return status; +} + +/** + * ixgbe_write_pe - Write register to port expander + * @hw: pointer to hardware structure + * @reg: register number to write + * @value: value to write + * + * Returns status code + */ +static s32 ixgbe_write_pe(struct ixgbe_hw *hw, u8 reg, u8 value) +{ + s32 status; + + status = ixgbe_write_i2c_byte_generic_unlocked(hw, reg, IXGBE_PE, + value); + if (status) + hw_err(hw, "port expander access failed with %d\n", status); + return status; +} + +/** + * ixgbe_reset_cs4227 - Reset CS4227 using port expander + * @hw: pointer to hardware structure + * + * Returns error code + */ +static s32 ixgbe_reset_cs4227(struct ixgbe_hw *hw) +{ + s32 status; + u32 retry; + u16 value; + u8 reg; + + /* Trigger hard reset. */ + status = ixgbe_read_pe(hw, IXGBE_PE_OUTPUT, ®); + if (status) + return status; + reg |= IXGBE_PE_BIT1; + status = ixgbe_write_pe(hw, IXGBE_PE_OUTPUT, reg); + if (status) + return status; + + status = ixgbe_read_pe(hw, IXGBE_PE_CONFIG, ®); + if (status) + return status; + reg &= ~IXGBE_PE_BIT1; + status = ixgbe_write_pe(hw, IXGBE_PE_CONFIG, reg); + if (status) + return status; + + status = ixgbe_read_pe(hw, IXGBE_PE_OUTPUT, ®); + if (status) + return status; + reg &= ~IXGBE_PE_BIT1; + status = ixgbe_write_pe(hw, IXGBE_PE_OUTPUT, reg); + if (status) + return status; + + usleep_range(IXGBE_CS4227_RESET_HOLD, IXGBE_CS4227_RESET_HOLD + 100); + + status = ixgbe_read_pe(hw, IXGBE_PE_OUTPUT, ®); + if (status) + return status; + reg |= IXGBE_PE_BIT1; + status = ixgbe_write_pe(hw, IXGBE_PE_OUTPUT, reg); + if (status) + return status; + + /* Wait for the reset to complete. */ + msleep(IXGBE_CS4227_RESET_DELAY); + for (retry = 0; retry < IXGBE_CS4227_RETRIES; retry++) { + status = ixgbe_read_cs4227(hw, IXGBE_CS4227_EFUSE_STATUS, + &value); + if (!status && value == IXGBE_CS4227_EEPROM_LOAD_OK) + break; + msleep(IXGBE_CS4227_CHECK_DELAY); + } + if (retry == IXGBE_CS4227_RETRIES) { + hw_err(hw, "CS4227 reset did not complete\n"); + return IXGBE_ERR_PHY; + } + + status = ixgbe_read_cs4227(hw, IXGBE_CS4227_EEPROM_STATUS, &value); + if (status || !(value & IXGBE_CS4227_EEPROM_LOAD_OK)) { + hw_err(hw, "CS4227 EEPROM did not load successfully\n"); + return IXGBE_ERR_PHY; + } + + return 0; +} + +/** + * ixgbe_check_cs4227 - Check CS4227 and reset as needed + * @hw: pointer to hardware structure + */ +static void ixgbe_check_cs4227(struct ixgbe_hw *hw) +{ + u32 swfw_mask = hw->phy.phy_semaphore_mask; + s32 status; + u16 value; + u8 retry; + + for (retry = 0; retry < IXGBE_CS4227_RETRIES; retry++) { + status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask); + if (status) { + hw_err(hw, "semaphore failed with %d\n", status); + msleep(IXGBE_CS4227_CHECK_DELAY); + continue; + } + + /* Get status of reset flow. */ + status = ixgbe_read_cs4227(hw, IXGBE_CS4227_SCRATCH, &value); + if (!status && value == IXGBE_CS4227_RESET_COMPLETE) + goto out; + + if (status || value != IXGBE_CS4227_RESET_PENDING) + break; + + /* Reset is pending. Wait and check again. */ + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + msleep(IXGBE_CS4227_CHECK_DELAY); + } + + /* Reset the CS4227. */ + status = ixgbe_reset_cs4227(hw); + if (status) { + hw_err(hw, "CS4227 reset failed: %d", status); + goto out; + } + + /* Reset takes so long, temporarily release semaphore in case the + * other driver instance is waiting for the reset indication. + */ + ixgbe_write_cs4227(hw, IXGBE_CS4227_SCRATCH, + IXGBE_CS4227_RESET_PENDING); + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + usleep_range(10000, 12000); + status = hw->mac.ops.acquire_swfw_sync(hw, swfw_mask); + if (status) { + hw_err(hw, "semaphore failed with %d", status); + return; + } + + /* Is the CS4227 working correctly? */ + status = ixgbe_get_cs4227_status(hw); + if (status) { + hw_err(hw, "CS4227 status failed: %d", status); + goto out; + } + + /* Record completion for next time. */ + status = ixgbe_write_cs4227(hw, IXGBE_CS4227_SCRATCH, + IXGBE_CS4227_RESET_COMPLETE); + +out: + hw->mac.ops.release_swfw_sync(hw, swfw_mask); + msleep(hw->eeprom.semaphore_delay); +} + /** ixgbe_identify_phy_x550em - Get PHY type based on device id * @hw: pointer to hardware structure * @@ -68,7 +345,7 @@ static s32 ixgbe_identify_phy_x550em(struct ixgbe_hw *hw) /* set up for CS4227 usage */ hw->phy.phy_semaphore_mask = IXGBE_GSSR_SHARED_I2C_SM; ixgbe_setup_mux_ctl(hw); - + ixgbe_check_cs4227(hw); return ixgbe_identify_module_generic(hw); case IXGBE_DEV_ID_X550EM_X_KX4: hw->phy.type = ixgbe_phy_x550em_kx4;