From: Cristobal Forno Date: Thu, 10 Jun 2021 17:08:35 +0000 (-0600) Subject: ibmvnic: Allow device probe if the device is not ready at boot X-Git-Tag: accepted/tizen/unified/20230118.172025~6942^2~217 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=53f8b1b25419a14b784feb6706bfe5bac03c5a75;p=platform%2Fkernel%2Flinux-rpi.git ibmvnic: Allow device probe if the device is not ready at boot Allow the device to be initialized at a later time if it is not available at boot. The device will be allowed to probe but will be given a "down" state. After completing device probe and registering the net device, the driver will await an interrupt signal from its partner device, indicating that it is ready for boot. The driver will schedule a work event to perform the necessary procedure and begin operation. Co-developed-by: Thomas Falcon Signed-off-by: Thomas Falcon Signed-off-by: Cristobal Forno Acked-by: Lijun Pan Reviewed-by: Dany Madden Signed-off-by: David S. Miller --- diff --git a/drivers/net/ethernet/ibm/ibmvnic.c b/drivers/net/ethernet/ibm/ibmvnic.c index ffd26cd..d66e158 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.c +++ b/drivers/net/ethernet/ibm/ibmvnic.c @@ -141,6 +141,29 @@ static const struct ibmvnic_stat ibmvnic_stats[] = { {"internal_mac_rx_errors", IBMVNIC_STAT_OFF(internal_mac_rx_errors)}, }; +static int send_crq_init_complete(struct ibmvnic_adapter *adapter) +{ + union ibmvnic_crq crq; + + memset(&crq, 0, sizeof(crq)); + crq.generic.first = IBMVNIC_CRQ_INIT_CMD; + crq.generic.cmd = IBMVNIC_CRQ_INIT_COMPLETE; + + return ibmvnic_send_crq(adapter, &crq); +} + +static int send_version_xchg(struct ibmvnic_adapter *adapter) +{ + union ibmvnic_crq crq; + + memset(&crq, 0, sizeof(crq)); + crq.version_exchange.first = IBMVNIC_CRQ_CMD; + crq.version_exchange.cmd = VERSION_EXCHANGE; + crq.version_exchange.version = cpu_to_be16(ibmvnic_version); + + return ibmvnic_send_crq(adapter, &crq); +} + static long h_reg_sub_crq(unsigned long unit_address, unsigned long token, unsigned long length, unsigned long *number, unsigned long *irq) @@ -2083,10 +2106,10 @@ static int do_reset(struct ibmvnic_adapter *adapter, goto out; } - /* If the adapter was in PROBE state prior to the reset, + /* If the adapter was in PROBE or DOWN state prior to the reset, * exit here. */ - if (reset_state == VNIC_PROBED) { + if (reset_state == VNIC_PROBED || reset_state == VNIC_DOWN) { rc = 0; goto out; } @@ -2212,10 +2235,10 @@ static int do_hard_reset(struct ibmvnic_adapter *adapter, if (rc) goto out; - /* If the adapter was in PROBE state prior to the reset, + /* If the adapter was in PROBE or DOWN state prior to the reset, * exit here. */ - if (reset_state == VNIC_PROBED) + if (reset_state == VNIC_PROBED || reset_state == VNIC_DOWN) goto out; rc = ibmvnic_login(netdev); @@ -2268,6 +2291,76 @@ static struct ibmvnic_rwi *get_next_rwi(struct ibmvnic_adapter *adapter) return rwi; } +/** + * do_passive_init - complete probing when partner device is detected. + * @adapter: ibmvnic_adapter struct + * + * If the ibmvnic device does not have a partner device to communicate with at boot + * and that partner device comes online at a later time, this function is called + * to complete the initialization process of ibmvnic device. + * Caller is expected to hold rtnl_lock(). + * + * Returns non-zero if sub-CRQs are not initialized properly leaving the device + * in the down state. + * Returns 0 upon success and the device is in PROBED state. + */ + +static int do_passive_init(struct ibmvnic_adapter *adapter) +{ + unsigned long timeout = msecs_to_jiffies(30000); + struct net_device *netdev = adapter->netdev; + struct device *dev = &adapter->vdev->dev; + int rc; + + netdev_dbg(netdev, "Partner device found, probing.\n"); + + adapter->state = VNIC_PROBING; + reinit_completion(&adapter->init_done); + adapter->init_done_rc = 0; + adapter->crq.active = true; + + rc = send_crq_init_complete(adapter); + if (rc) + goto out; + + rc = send_version_xchg(adapter); + if (rc) + netdev_dbg(adapter->netdev, "send_version_xchg failed, rc=%d\n", rc); + + if (!wait_for_completion_timeout(&adapter->init_done, timeout)) { + dev_err(dev, "Initialization sequence timed out\n"); + rc = -ETIMEDOUT; + goto out; + } + + rc = init_sub_crqs(adapter); + if (rc) { + dev_err(dev, "Initialization of sub crqs failed, rc=%d\n", rc); + goto out; + } + + rc = init_sub_crq_irqs(adapter); + if (rc) { + dev_err(dev, "Failed to initialize sub crq irqs\n, rc=%d", rc); + goto init_failed; + } + + netdev->mtu = adapter->req_mtu - ETH_HLEN; + netdev->min_mtu = adapter->min_mtu - ETH_HLEN; + netdev->max_mtu = adapter->max_mtu - ETH_HLEN; + + adapter->state = VNIC_PROBED; + netdev_dbg(netdev, "Probed successfully. Waiting for signal from partner device.\n"); + + return 0; + +init_failed: + release_sub_crqs(adapter, 1); +out: + adapter->state = VNIC_DOWN; + return rc; +} + static void __ibmvnic_reset(struct work_struct *work) { struct ibmvnic_rwi *rwi; @@ -2304,7 +2397,13 @@ static void __ibmvnic_reset(struct work_struct *work) } spin_unlock_irqrestore(&adapter->state_lock, flags); - if (adapter->force_reset_recovery) { + if (rwi->reset_reason == VNIC_RESET_PASSIVE_INIT) { + rtnl_lock(); + rc = do_passive_init(adapter); + rtnl_unlock(); + if (!rc) + netif_carrier_on(adapter->netdev); + } else if (adapter->force_reset_recovery) { /* Since we are doing a hard reset now, clear the * failover_pending flag so we don't ignore any * future MOBILITY or other resets. @@ -3773,18 +3872,6 @@ static int ibmvnic_send_crq_init(struct ibmvnic_adapter *adapter) return 0; } -static int send_version_xchg(struct ibmvnic_adapter *adapter) -{ - union ibmvnic_crq crq; - - memset(&crq, 0, sizeof(crq)); - crq.version_exchange.first = IBMVNIC_CRQ_CMD; - crq.version_exchange.cmd = VERSION_EXCHANGE; - crq.version_exchange.version = cpu_to_be16(ibmvnic_version); - - return ibmvnic_send_crq(adapter, &crq); -} - struct vnic_login_client_data { u8 type; __be16 len; @@ -4904,7 +4991,12 @@ static void ibmvnic_handle_crq(union ibmvnic_crq *crq, complete(&adapter->init_done); adapter->init_done_rc = -EIO; } - rc = ibmvnic_reset(adapter, VNIC_RESET_FAILOVER); + + if (adapter->state == VNIC_DOWN) + rc = ibmvnic_reset(adapter, VNIC_RESET_PASSIVE_INIT); + else + rc = ibmvnic_reset(adapter, VNIC_RESET_FAILOVER); + if (rc && rc != -EBUSY) { /* We were unable to schedule the failover * reset either because the adapter was still @@ -5327,6 +5419,7 @@ static int ibmvnic_probe(struct vio_dev *dev, const struct vio_device_id *id) struct ibmvnic_adapter *adapter; struct net_device *netdev; unsigned char *mac_addr_p; + bool init_success; int rc; dev_dbg(&dev->dev, "entering ibmvnic_probe for UA 0x%x\n", @@ -5373,6 +5466,7 @@ static int ibmvnic_probe(struct vio_dev *dev, const struct vio_device_id *id) init_completion(&adapter->stats_done); clear_bit(0, &adapter->resetting); + init_success = false; do { rc = init_crq_queue(adapter); if (rc) { @@ -5382,10 +5476,16 @@ static int ibmvnic_probe(struct vio_dev *dev, const struct vio_device_id *id) } rc = ibmvnic_reset_init(adapter, false); - if (rc && rc != EAGAIN) - goto ibmvnic_init_fail; } while (rc == EAGAIN); + /* We are ignoring the error from ibmvnic_reset_init() assuming that the + * partner is not ready. CRQ is not active. When the partner becomes + * ready, we will do the passive init reset. + */ + + if (!rc) + init_success = true; + rc = init_stats_buffers(adapter); if (rc) goto ibmvnic_init_fail; @@ -5394,10 +5494,6 @@ static int ibmvnic_probe(struct vio_dev *dev, const struct vio_device_id *id) if (rc) goto ibmvnic_stats_fail; - netdev->mtu = adapter->req_mtu - ETH_HLEN; - netdev->min_mtu = adapter->min_mtu - ETH_HLEN; - netdev->max_mtu = adapter->max_mtu - ETH_HLEN; - rc = device_create_file(&dev->dev, &dev_attr_failover); if (rc) goto ibmvnic_dev_file_err; @@ -5410,7 +5506,14 @@ static int ibmvnic_probe(struct vio_dev *dev, const struct vio_device_id *id) } dev_info(&dev->dev, "ibmvnic registered\n"); - adapter->state = VNIC_PROBED; + if (init_success) { + adapter->state = VNIC_PROBED; + netdev->mtu = adapter->req_mtu - ETH_HLEN; + netdev->min_mtu = adapter->min_mtu - ETH_HLEN; + netdev->max_mtu = adapter->max_mtu - ETH_HLEN; + } else { + adapter->state = VNIC_DOWN; + } adapter->wait_for_reset = false; adapter->last_reset_time = jiffies; diff --git a/drivers/net/ethernet/ibm/ibmvnic.h b/drivers/net/ethernet/ibm/ibmvnic.h index c1d39a7..22df602 100644 --- a/drivers/net/ethernet/ibm/ibmvnic.h +++ b/drivers/net/ethernet/ibm/ibmvnic.h @@ -851,14 +851,16 @@ enum vnic_state {VNIC_PROBING = 1, VNIC_CLOSING, VNIC_CLOSED, VNIC_REMOVING, - VNIC_REMOVED}; + VNIC_REMOVED, + VNIC_DOWN}; enum ibmvnic_reset_reason {VNIC_RESET_FAILOVER = 1, VNIC_RESET_MOBILITY, VNIC_RESET_FATAL, VNIC_RESET_NON_FATAL, VNIC_RESET_TIMEOUT, - VNIC_RESET_CHANGE_PARAM}; + VNIC_RESET_CHANGE_PARAM, + VNIC_RESET_PASSIVE_INIT}; struct ibmvnic_rwi { enum ibmvnic_reset_reason reset_reason;