From: Olof Johansson Date: Fri, 5 Jan 2018 07:17:16 +0000 (-0800) Subject: Merge tag 'sunxi-dt-for-4.16' of https://git.kernel.org/pub/scm/linux/kernel/git... X-Git-Tag: v4.19~1679^2~30 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=5333aeb10132549c5893ce5822652ae2f3770d26;p=platform%2Fkernel%2Flinux-rpi.git Merge tag 'sunxi-dt-for-4.16' of https://git./linux/kernel/git/sunxi/linux into next/dt Allwinner DT changes for 4.16 A random assortment of improvements. GPIO device nodes are added for the AXP813/AXP818 PMICs, meaning we can finally use the GPIO pins on the PMICs. The LDOs on the GPIO pins can also be properly muxed and guarded. EMAC Ethernet support is enabled for more H3 boards, and also for the A83T, following the return of the bindings in 4.15, after a last minute revert in 4.13. This will make the H3/A83T boards much more useful in headless applications. Two new boards are introduced. The Orange Pi R1 is a small board with two Ethernet interfaces (one EMAC-based and one USB-based) and a WiFi chip. This board is fully supported, with the exception of TV-out on the expansion header, which will not be enabled by default. The WiFi chip (RTL8189FTV) requires an out-of-tree driver. The Libre Computer Board ALL-H3-CC H3 version is a newcomer to the Allwinner SBC space, which was mostly represented by a bunch of fruit-Pis. It is mostly supported, with the exception of HDMI and camera sensor interface, which have not been implemented yet. Two minor patches enable the audio codec on the A13 Olinuxino, and HDMI output on the pcDuino3 Nano. * tag 'sunxi-dt-for-4.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: ARM: dts: sun8i: h3: nanopi-m1-plus: fix missing ethernet 0 in aliases ARM: dts: sun8i: h3: Enable dwmac-sun8i on the Nanopi M1 ARM: dts: sun7i: Enable HDMI on pcDuino3 Nano ARM: dts: sun8i: a83t: Add I2C device nodes and pinmux settings ARM: dts: sun8i: a83t: Add I2S controller device nodes ARM: dts: sun8i-h3: Remove allwinner,leds-active-low for non internal PHY ARM: dts: sun8i: a83t: Enable Ethernet on two boards ARM: dts: sun8i: a83t: add dwmac-sun8i device node ARM: dts: sun8i: h3: enable USB OTG for NanoPi Neo board ARM: dts: sun8i: h3: Add dts file for Libre Computer Board ALL-H3-CC H3 ver. ARM: dtsi: axp81x: set pinmux for GPIO0/1 when used as LDOs ARM: dtsi: axp81x: add GPIO DT node ARM: dts: sun8i: add support for Orange Pi R1 ARM: dts: sunxi: Add codec for A13 Olinuxino Signed-off-by: Olof Johansson --- 5333aeb10132549c5893ce5822652ae2f3770d26