From: Hayes Wang <hayeswang@realtek.com>
Date: Fri, 16 Apr 2021 08:04:32 +0000 (+0800)
Subject: r8152: set inter fram gap time depending on speed
X-Git-Tag: accepted/tizen/unified/20230118.172025~7335^2~131^2~5
X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=5133bcc7481528e36fff0a3b056601efb704fb32;p=platform%2Fkernel%2Flinux-rpi.git

r8152: set inter fram gap time depending on speed

Set the maximum inter frame gap time (144ns) for speed 10M/half and
100M/half. It improves the performance for those speeds. And, there
is no effect for the other speeds.

For 10M/half and 100M/half, the fast inter frame gap time let the
device couldn't use the feature of the aggregation effectively,
because the transfer would be completed fastly. Therefore, use the
maximum value to improve the effect of the aggregation. However, you
may not feel the improvement for fast CPUs, because they compensate
for the effect of the aggregation.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
---

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 20fb563..10db48f 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -249,6 +249,9 @@
 
 /* PLA_TCR1 */
 #define VERSION_MASK		0x7cf0
+#define IFG_MASK		(BIT(3) | BIT(9) | BIT(8))
+#define IFG_144NS		BIT(9)
+#define IFG_96NS		(BIT(9) | BIT(8))
 
 /* PLA_MTPS */
 #define MTPS_JUMBO		(12 * 1024 / 64)
@@ -2747,6 +2750,29 @@ static int rtl_stop_rx(struct r8152 *tp)
 	return 0;
 }
 
+static void rtl_set_ifg(struct r8152 *tp, u16 speed)
+{
+	u32 ocp_data;
+
+	ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_TCR1);
+	ocp_data &= ~IFG_MASK;
+	if ((speed & (_10bps | _100bps)) && !(speed & FULL_DUP)) {
+		ocp_data |= IFG_144NS;
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_TCR1, ocp_data);
+
+		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4);
+		ocp_data &= ~TX10MIDLE_EN;
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data);
+	} else {
+		ocp_data |= IFG_96NS;
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_TCR1, ocp_data);
+
+		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4);
+		ocp_data |= TX10MIDLE_EN;
+		ocp_write_word(tp, MCU_TYPE_PLA, PLA_MAC_PWR_CTRL4, ocp_data);
+	}
+}
+
 static inline void r8153b_rx_agg_chg_indicate(struct r8152 *tp)
 {
 	ocp_write_byte(tp, MCU_TYPE_USB, USB_UPT_RXDMA_OWN,
@@ -2850,6 +2876,8 @@ static int rtl8153_enable(struct r8152 *tp)
 	r8153_set_rx_early_timeout(tp);
 	r8153_set_rx_early_size(tp);
 
+	rtl_set_ifg(tp, rtl8152_get_speed(tp));
+
 	if (tp->version == RTL_VER_09) {
 		u32 ocp_data;