From: Daniel J. Ogorchock Date: Sat, 11 Sep 2021 17:36:36 +0000 (-0400) Subject: HID: nintendo: add IMU support X-Git-Tag: v6.1-rc5~2717^2~3^2~4 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=4ff5b10840a88eb3d7609f08adfd663cac151152;p=platform%2Fkernel%2Flinux-starfive.git HID: nintendo: add IMU support This patch adds support for the controller's IMU. The accelerometer and gyro data are both provided to userspace using a second input device. The devices can be associated using their uniq value (set to the controller's MAC address). A large part of this patch's functionality was provided by Carl Mueller. The IMU device is blacklisted from the joydev input handler. Signed-off-by: Daniel J. Ogorchock Acked-by: Dmitry Torokhov Signed-off-by: Jiri Kosina --- diff --git a/drivers/hid/hid-nintendo.c b/drivers/hid/hid-nintendo.c index b914e26..1e8dc34 100644 --- a/drivers/hid/hid-nintendo.c +++ b/drivers/hid/hid-nintendo.c @@ -2,7 +2,7 @@ /* * HID driver for Nintendo Switch Joy-Cons and Pro Controllers * - * Copyright (c) 2019 Daniel J. Ogorchock + * Copyright (c) 2019-2020 Daniel J. Ogorchock * * The following resources/projects were referenced for this driver: * https://github.com/dekuNukem/Nintendo_Switch_Reverse_Engineering @@ -26,6 +26,7 @@ #include #include #include +#include #include #include #include @@ -115,6 +116,15 @@ static const u16 JC_CAL_USR_RIGHT_DATA_ADDR = 0x801D; static const u16 JC_CAL_FCT_DATA_LEFT_ADDR = 0x603d; static const u16 JC_CAL_FCT_DATA_RIGHT_ADDR = 0x6046; +/* SPI storage addresses of IMU factory calibration data */ +static const u16 JC_IMU_CAL_FCT_DATA_ADDR = 0x6020; +static const u16 JC_IMU_CAL_FCT_DATA_END = 0x6037; +#define JC_IMU_CAL_DATA_SIZE \ + (JC_IMU_CAL_FCT_DATA_END - JC_IMU_CAL_FCT_DATA_ADDR + 1) +/* SPI storage addresses of IMU user calibration data */ +static const u16 JC_IMU_CAL_USR_MAGIC_ADDR = 0x8026; +static const u16 JC_IMU_CAL_USR_DATA_ADDR = 0x8028; + /* The raw analog joystick values will be mapped in terms of this magnitude */ static const u16 JC_MAX_STICK_MAG = 32767; static const u16 JC_STICK_FUZZ = 250; @@ -125,6 +135,47 @@ static const u16 JC_MAX_DPAD_MAG = 1; static const u16 JC_DPAD_FUZZ /*= 0*/; static const u16 JC_DPAD_FLAT /*= 0*/; +/* Under most circumstances IMU reports are pushed every 15ms; use as default */ +static const u16 JC_IMU_DFLT_AVG_DELTA_MS = 15; +/* How many samples to sum before calculating average IMU report delta */ +static const u16 JC_IMU_SAMPLES_PER_DELTA_AVG = 300; +/* Controls how many dropped IMU packets at once trigger a warning message */ +static const u16 JC_IMU_DROPPED_PKT_WARNING = 3; + +/* + * The controller's accelerometer has a sensor resolution of 16bits and is + * configured with a range of +-8000 milliGs. Therefore, the resolution can be + * calculated thus: (2^16-1)/(8000 * 2) = 4.096 digits per milliG + * Resolution per G (rather than per millliG): 4.096 * 1000 = 4096 digits per G + * Alternatively: 1/4096 = .0002441 Gs per digit + */ +static const s32 JC_IMU_MAX_ACCEL_MAG = 32767; +static const u16 JC_IMU_ACCEL_RES_PER_G = 4096; +static const u16 JC_IMU_ACCEL_FUZZ = 10; +static const u16 JC_IMU_ACCEL_FLAT /*= 0*/; + +/* + * The controller's gyroscope has a sensor resolution of 16bits and is + * configured with a range of +-2000 degrees/second. + * Digits per dps: (2^16 -1)/(2000*2) = 16.38375 + * dps per digit: 16.38375E-1 = .0610 + * + * STMicro recommends in the datasheet to add 15% to the dps/digit. This allows + * the full sensitivity range to be saturated without clipping. This yields more + * accurate results, so it's the technique this driver uses. + * dps per digit (corrected): .0610 * 1.15 = .0702 + * digits per dps (corrected): .0702E-1 = 14.247 + * + * Now, 14.247 truncating to 14 loses a lot of precision, so we rescale the + * min/max range by 1000. + */ +static const s32 JC_IMU_PREC_RANGE_SCALE = 1000; +/* Note: change mag and res_per_dps if prec_range_scale is ever altered */ +static const s32 JC_IMU_MAX_GYRO_MAG = 32767000; /* (2^16-1)*1000 */ +static const u16 JC_IMU_GYRO_RES_PER_DPS = 14247; /* (14.247*1000) */ +static const u16 JC_IMU_GYRO_FUZZ = 10; +static const u16 JC_IMU_GYRO_FLAT /*= 0*/; + /* frequency/amplitude tables for rumble */ struct joycon_rumble_freq_data { u16 high; @@ -259,6 +310,11 @@ struct joycon_stick_cal { s32 center; }; +struct joycon_imu_cal { + s16 offset[3]; + s16 scale[3]; +}; + /* * All the controller's button values are stored in a u32. * They can be accessed with bitwise ANDs. @@ -306,6 +362,15 @@ struct joycon_subcmd_reply { u8 data[]; /* will be at most 35 bytes */ } __packed; +struct joycon_imu_data { + s16 accel_x; + s16 accel_y; + s16 accel_z; + s16 gyro_x; + s16 gyro_y; + s16 gyro_z; +} __packed; + struct joycon_input_report { u8 id; u8 timer; @@ -315,11 +380,11 @@ struct joycon_input_report { u8 right_stick[3]; u8 vibrator_report; - /* - * If support for firmware updates, gyroscope data, and/or NFC/IR - * are added in the future, this can be swapped for a union. - */ - struct joycon_subcmd_reply reply; + union { + struct joycon_subcmd_reply subcmd_reply; + /* IMU input reports contain 3 samples */ + u8 imu_raw_bytes[sizeof(struct joycon_imu_data) * 3]; + }; } __packed; #define JC_MAX_RESP_SIZE (sizeof(struct joycon_input_report) + 35) @@ -367,6 +432,13 @@ struct joycon_ctlr { struct joycon_stick_cal right_stick_cal_x; struct joycon_stick_cal right_stick_cal_y; + struct joycon_imu_cal accel_cal; + struct joycon_imu_cal gyro_cal; + + /* prevents needlessly recalculating these divisors every sample */ + s32 imu_cal_accel_divisor[3]; + s32 imu_cal_gyro_divisor[3]; + /* power supply data */ struct power_supply *battery; struct power_supply_desc battery_desc; @@ -385,6 +457,16 @@ struct joycon_ctlr { u16 rumble_lh_freq; u16 rumble_rl_freq; u16 rumble_rh_freq; + + /* imu */ + struct input_dev *imu_input; + bool imu_first_packet_received; /* helps in initiating timestamp */ + unsigned int imu_timestamp_us; /* timestamp we report to userspace */ + unsigned int imu_last_pkt_ms; /* used to calc imu report delta */ + /* the following are used to track the average imu report time delta */ + unsigned int imu_delta_samples_count; + unsigned int imu_delta_samples_sum; + unsigned int imu_avg_delta_ms; }; /* Helper macros for checking controller type */ @@ -569,7 +651,7 @@ static int joycon_request_spi_flash_read(struct joycon_ctlr *ctlr, } else { report = (struct joycon_input_report *)ctlr->input_buf; /* The read data starts at the 6th byte */ - *reply = &report->reply.data[5]; + *reply = &report->subcmd_reply.data[5]; } return ret; } @@ -729,6 +811,94 @@ static int joycon_request_calibration(struct joycon_ctlr *ctlr) return 0; } +/* + * These divisors are calculated once rather than for each sample. They are only + * dependent on the IMU calibration values. They are used when processing the + * IMU input reports. + */ +static void joycon_calc_imu_cal_divisors(struct joycon_ctlr *ctlr) +{ + int i; + + for (i = 0; i < 3; i++) { + ctlr->imu_cal_accel_divisor[i] = ctlr->accel_cal.scale[i] - + ctlr->accel_cal.offset[i]; + ctlr->imu_cal_gyro_divisor[i] = ctlr->gyro_cal.scale[i] - + ctlr->gyro_cal.offset[i]; + } +} + +static const s16 DFLT_ACCEL_OFFSET /*= 0*/; +static const s16 DFLT_ACCEL_SCALE = 16384; +static const s16 DFLT_GYRO_OFFSET /*= 0*/; +static const s16 DFLT_GYRO_SCALE = 13371; +static int joycon_request_imu_calibration(struct joycon_ctlr *ctlr) +{ + u16 imu_cal_addr = JC_IMU_CAL_FCT_DATA_ADDR; + u8 *raw_cal; + int ret; + int i; + + /* check if user calibration exists */ + if (!joycon_check_for_cal_magic(ctlr, JC_IMU_CAL_USR_MAGIC_ADDR)) { + imu_cal_addr = JC_IMU_CAL_USR_DATA_ADDR; + hid_info(ctlr->hdev, "using user cal for IMU\n"); + } else { + hid_info(ctlr->hdev, "using factory cal for IMU\n"); + } + + /* request IMU calibration data */ + hid_dbg(ctlr->hdev, "requesting IMU cal data\n"); + ret = joycon_request_spi_flash_read(ctlr, imu_cal_addr, + JC_IMU_CAL_DATA_SIZE, &raw_cal); + if (ret) { + hid_warn(ctlr->hdev, + "Failed to read IMU cal, using defaults; ret=%d\n", + ret); + + for (i = 0; i < 3; i++) { + ctlr->accel_cal.offset[i] = DFLT_ACCEL_OFFSET; + ctlr->accel_cal.scale[i] = DFLT_ACCEL_SCALE; + ctlr->gyro_cal.offset[i] = DFLT_GYRO_OFFSET; + ctlr->gyro_cal.scale[i] = DFLT_GYRO_SCALE; + } + joycon_calc_imu_cal_divisors(ctlr); + return ret; + } + + /* IMU calibration parsing */ + for (i = 0; i < 3; i++) { + int j = i * 2; + + ctlr->accel_cal.offset[i] = get_unaligned_le16(raw_cal + j); + ctlr->accel_cal.scale[i] = get_unaligned_le16(raw_cal + j + 6); + ctlr->gyro_cal.offset[i] = get_unaligned_le16(raw_cal + j + 12); + ctlr->gyro_cal.scale[i] = get_unaligned_le16(raw_cal + j + 18); + } + + joycon_calc_imu_cal_divisors(ctlr); + + hid_dbg(ctlr->hdev, "IMU calibration:\n" + "a_o[0]=%d a_o[1]=%d a_o[2]=%d\n" + "a_s[0]=%d a_s[1]=%d a_s[2]=%d\n" + "g_o[0]=%d g_o[1]=%d g_o[2]=%d\n" + "g_s[0]=%d g_s[1]=%d g_s[2]=%d\n", + ctlr->accel_cal.offset[0], + ctlr->accel_cal.offset[1], + ctlr->accel_cal.offset[2], + ctlr->accel_cal.scale[0], + ctlr->accel_cal.scale[1], + ctlr->accel_cal.scale[2], + ctlr->gyro_cal.offset[0], + ctlr->gyro_cal.offset[1], + ctlr->gyro_cal.offset[2], + ctlr->gyro_cal.scale[0], + ctlr->gyro_cal.scale[1], + ctlr->gyro_cal.scale[2]); + + return 0; +} + static int joycon_set_report_mode(struct joycon_ctlr *ctlr) { struct joycon_subcmd_request *req; @@ -755,6 +925,19 @@ static int joycon_enable_rumble(struct joycon_ctlr *ctlr) return joycon_send_subcmd(ctlr, req, 1, HZ/4); } +static int joycon_enable_imu(struct joycon_ctlr *ctlr) +{ + struct joycon_subcmd_request *req; + u8 buffer[sizeof(*req) + 1] = { 0 }; + + req = (struct joycon_subcmd_request *)buffer; + req->subcmd_id = JC_SUBCMD_ENABLE_IMU; + req->data[0] = 0x01; /* note: 0x00 would disable */ + + hid_dbg(ctlr->hdev, "enabling IMU\n"); + return joycon_send_subcmd(ctlr, req, 1, HZ); +} + static s32 joycon_map_stick_val(struct joycon_stick_cal *cal, s32 val) { s32 center = cal->center; @@ -773,6 +956,224 @@ static s32 joycon_map_stick_val(struct joycon_stick_cal *cal, s32 val) return new_val; } +static void joycon_input_report_parse_imu_data(struct joycon_ctlr *ctlr, + struct joycon_input_report *rep, + struct joycon_imu_data *imu_data) +{ + u8 *raw = rep->imu_raw_bytes; + int i; + + for (i = 0; i < 3; i++) { + struct joycon_imu_data *data = &imu_data[i]; + + data->accel_x = get_unaligned_le16(raw + 0); + data->accel_y = get_unaligned_le16(raw + 2); + data->accel_z = get_unaligned_le16(raw + 4); + data->gyro_x = get_unaligned_le16(raw + 6); + data->gyro_y = get_unaligned_le16(raw + 8); + data->gyro_z = get_unaligned_le16(raw + 10); + /* point to next imu sample */ + raw += sizeof(struct joycon_imu_data); + } +} + +static void joycon_parse_imu_report(struct joycon_ctlr *ctlr, + struct joycon_input_report *rep) +{ + struct joycon_imu_data imu_data[3] = {0}; /* 3 reports per packet */ + struct input_dev *idev = ctlr->imu_input; + unsigned int msecs = jiffies_to_msecs(jiffies); + unsigned int last_msecs = ctlr->imu_last_pkt_ms; + int i; + int value[6]; + + joycon_input_report_parse_imu_data(ctlr, rep, imu_data); + + /* + * There are complexities surrounding how we determine the timestamps we + * associate with the samples we pass to userspace. The IMU input + * reports do not provide us with a good timestamp. There's a quickly + * incrementing 8-bit counter per input report, but it is not very + * useful for this purpose (it is not entirely clear what rate it + * increments at or if it varies based on packet push rate - more on + * the push rate below...). + * + * The reverse engineering work done on the joy-cons and pro controllers + * by the community seems to indicate the following: + * - The controller samples the IMU every 1.35ms. It then does some of + * its own processing, probably averaging the samples out. + * - Each imu input report contains 3 IMU samples, (usually 5ms apart). + * - In the standard reporting mode (which this driver uses exclusively) + * input reports are pushed from the controller as follows: + * * joy-con (bluetooth): every 15 ms + * * joy-cons (in charging grip via USB): every 15 ms + * * pro controller (USB): every 15 ms + * * pro controller (bluetooth): every 8 ms (this is the wildcard) + * + * Further complicating matters is that some bluetooth stacks are known + * to alter the controller's packet rate by hardcoding the bluetooth + * SSR for the switch controllers (android's stack currently sets the + * SSR to 11ms for both the joy-cons and pro controllers). + * + * In my own testing, I've discovered that my pro controller either + * reports IMU sample batches every 11ms or every 15ms. This rate is + * stable after connecting. It isn't 100% clear what determines this + * rate. Importantly, even when sending every 11ms, none of the samples + * are duplicates. This seems to indicate that the time deltas between + * reported samples can vary based on the input report rate. + * + * The solution employed in this driver is to keep track of the average + * time delta between IMU input reports. In testing, this value has + * proven to be stable, staying at 15ms or 11ms, though other hardware + * configurations and bluetooth stacks could potentially see other rates + * (hopefully this will become more clear as more people use the + * driver). + * + * Keeping track of the average report delta allows us to submit our + * timestamps to userspace based on that. Each report contains 3 + * samples, so the IMU sampling rate should be avg_time_delta/3. We can + * also use this average to detect events where we have dropped a + * packet. The userspace timestamp for the samples will be adjusted + * accordingly to prevent unwanted behvaior. + */ + if (!ctlr->imu_first_packet_received) { + ctlr->imu_timestamp_us = 0; + ctlr->imu_delta_samples_count = 0; + ctlr->imu_delta_samples_sum = 0; + ctlr->imu_avg_delta_ms = JC_IMU_DFLT_AVG_DELTA_MS; + ctlr->imu_first_packet_received = true; + } else { + unsigned int delta = msecs - last_msecs; + unsigned int dropped_pkts; + unsigned int dropped_threshold; + + /* avg imu report delta housekeeping */ + ctlr->imu_delta_samples_sum += delta; + ctlr->imu_delta_samples_count++; + if (ctlr->imu_delta_samples_count >= + JC_IMU_SAMPLES_PER_DELTA_AVG) { + ctlr->imu_avg_delta_ms = ctlr->imu_delta_samples_sum / + ctlr->imu_delta_samples_count; + /* don't ever want divide by zero shenanigans */ + if (ctlr->imu_avg_delta_ms == 0) { + ctlr->imu_avg_delta_ms = 1; + hid_warn(ctlr->hdev, + "calculated avg imu delta of 0\n"); + } + ctlr->imu_delta_samples_count = 0; + ctlr->imu_delta_samples_sum = 0; + } + + /* useful for debugging IMU sample rate */ + hid_dbg(ctlr->hdev, + "imu_report: ms=%u last_ms=%u delta=%u avg_delta=%u\n", + msecs, last_msecs, delta, ctlr->imu_avg_delta_ms); + + /* check if any packets have been dropped */ + dropped_threshold = ctlr->imu_avg_delta_ms * 3 / 2; + dropped_pkts = (delta - min(delta, dropped_threshold)) / + ctlr->imu_avg_delta_ms; + ctlr->imu_timestamp_us += 1000 * ctlr->imu_avg_delta_ms; + if (dropped_pkts > JC_IMU_DROPPED_PKT_WARNING) { + hid_warn(ctlr->hdev, + "compensating for %u dropped IMU reports\n", + dropped_pkts); + hid_warn(ctlr->hdev, + "delta=%u avg_delta=%u\n", + delta, ctlr->imu_avg_delta_ms); + } + } + ctlr->imu_last_pkt_ms = msecs; + + /* Each IMU input report contains three samples */ + for (i = 0; i < 3; i++) { + input_event(idev, EV_MSC, MSC_TIMESTAMP, + ctlr->imu_timestamp_us); + + /* + * These calculations (which use the controller's calibration + * settings to improve the final values) are based on those + * found in the community's reverse-engineering repo (linked at + * top of driver). For hid-nintendo, we make sure that the final + * value given to userspace is always in terms of the axis + * resolution we provided. + * + * Currently only the gyro calculations subtract the calibration + * offsets from the raw value itself. In testing, doing the same + * for the accelerometer raw values decreased accuracy. + * + * Note that the gyro values are multiplied by the + * precision-saving scaling factor to prevent large inaccuracies + * due to truncation of the resolution value which would + * otherwise occur. To prevent overflow (without resorting to 64 + * bit integer math), the mult_frac macro is used. + */ + value[0] = mult_frac((JC_IMU_PREC_RANGE_SCALE * + (imu_data[i].gyro_x - + ctlr->gyro_cal.offset[0])), + ctlr->gyro_cal.scale[0], + ctlr->imu_cal_gyro_divisor[0]); + value[1] = mult_frac((JC_IMU_PREC_RANGE_SCALE * + (imu_data[i].gyro_y - + ctlr->gyro_cal.offset[1])), + ctlr->gyro_cal.scale[1], + ctlr->imu_cal_gyro_divisor[1]); + value[2] = mult_frac((JC_IMU_PREC_RANGE_SCALE * + (imu_data[i].gyro_z - + ctlr->gyro_cal.offset[2])), + ctlr->gyro_cal.scale[2], + ctlr->imu_cal_gyro_divisor[2]); + + value[3] = ((s32)imu_data[i].accel_x * + ctlr->accel_cal.scale[0]) / + ctlr->imu_cal_accel_divisor[0]; + value[4] = ((s32)imu_data[i].accel_y * + ctlr->accel_cal.scale[1]) / + ctlr->imu_cal_accel_divisor[1]; + value[5] = ((s32)imu_data[i].accel_z * + ctlr->accel_cal.scale[2]) / + ctlr->imu_cal_accel_divisor[2]; + + hid_dbg(ctlr->hdev, "raw_gyro: g_x=%d g_y=%d g_z=%d\n", + imu_data[i].gyro_x, imu_data[i].gyro_y, + imu_data[i].gyro_z); + hid_dbg(ctlr->hdev, "raw_accel: a_x=%d a_y=%d a_z=%d\n", + imu_data[i].accel_x, imu_data[i].accel_y, + imu_data[i].accel_z); + + /* + * The right joy-con has 2 axes negated, Y and Z. This is due to + * the orientation of the IMU in the controller. We negate those + * axes' values in order to be consistent with the left joy-con + * and the pro controller: + * X: positive is pointing toward the triggers + * Y: positive is pointing to the left + * Z: positive is pointing up (out of the buttons/sticks) + * The axes follow the right-hand rule. + */ + if (jc_type_is_joycon(ctlr) && jc_type_has_right(ctlr)) { + int j; + + /* negate all but x axis */ + for (j = 1; j < 6; ++j) { + if (j == 3) + continue; + value[j] *= -1; + } + } + + input_report_abs(idev, ABS_RX, value[0]); + input_report_abs(idev, ABS_RY, value[1]); + input_report_abs(idev, ABS_RZ, value[2]); + input_report_abs(idev, ABS_X, value[3]); + input_report_abs(idev, ABS_Y, value[4]); + input_report_abs(idev, ABS_Z, value[5]); + input_sync(idev); + /* convert to micros and divide by 3 (3 samples per report). */ + ctlr->imu_timestamp_us += ctlr->imu_avg_delta_ms * 1000 / 3; + } +} + static void joycon_parse_report(struct joycon_ctlr *ctlr, struct joycon_input_report *rep) { @@ -921,6 +1322,10 @@ static void joycon_parse_report(struct joycon_ctlr *ctlr, spin_unlock_irqrestore(&ctlr->lock, flags); wake_up(&ctlr->wait); } + + /* parse IMU data if present */ + if (rep->id == JC_INPUT_IMU_DATA) + joycon_parse_imu_report(ctlr, rep); } static void joycon_rumble_worker(struct work_struct *work) @@ -1104,6 +1509,7 @@ static int joycon_input_create(struct joycon_ctlr *ctlr) { struct hid_device *hdev; const char *name; + const char *imu_name; int ret; int i; @@ -1112,18 +1518,24 @@ static int joycon_input_create(struct joycon_ctlr *ctlr) switch (hdev->product) { case USB_DEVICE_ID_NINTENDO_PROCON: name = "Nintendo Switch Pro Controller"; + imu_name = "Nintendo Switch Pro Controller IMU"; break; case USB_DEVICE_ID_NINTENDO_CHRGGRIP: - if (jc_type_has_left(ctlr)) + if (jc_type_has_left(ctlr)) { name = "Nintendo Switch Left Joy-Con (Grip)"; - else + imu_name = "Nintendo Switch Left Joy-Con IMU (Grip)"; + } else { name = "Nintendo Switch Right Joy-Con (Grip)"; + imu_name = "Nintendo Switch Right Joy-Con IMU (Grip)"; + } break; case USB_DEVICE_ID_NINTENDO_JOYCONL: name = "Nintendo Switch Left Joy-Con"; + imu_name = "Nintendo Switch Left Joy-Con IMU"; break; case USB_DEVICE_ID_NINTENDO_JOYCONR: name = "Nintendo Switch Right Joy-Con"; + imu_name = "Nintendo Switch Right Joy-Con IMU"; break; default: /* Should be impossible */ hid_err(hdev, "Invalid hid product\n"); @@ -1207,6 +1619,55 @@ static int joycon_input_create(struct joycon_ctlr *ctlr) if (ret) return ret; + /* configure the imu input device */ + ctlr->imu_input = devm_input_allocate_device(&hdev->dev); + if (!ctlr->imu_input) + return -ENOMEM; + + ctlr->imu_input->id.bustype = hdev->bus; + ctlr->imu_input->id.vendor = hdev->vendor; + ctlr->imu_input->id.product = hdev->product; + ctlr->imu_input->id.version = hdev->version; + ctlr->imu_input->uniq = ctlr->mac_addr_str; + ctlr->imu_input->name = imu_name; + input_set_drvdata(ctlr->imu_input, ctlr); + + /* configure imu axes */ + input_set_abs_params(ctlr->imu_input, ABS_X, + -JC_IMU_MAX_ACCEL_MAG, JC_IMU_MAX_ACCEL_MAG, + JC_IMU_ACCEL_FUZZ, JC_IMU_ACCEL_FLAT); + input_set_abs_params(ctlr->imu_input, ABS_Y, + -JC_IMU_MAX_ACCEL_MAG, JC_IMU_MAX_ACCEL_MAG, + JC_IMU_ACCEL_FUZZ, JC_IMU_ACCEL_FLAT); + input_set_abs_params(ctlr->imu_input, ABS_Z, + -JC_IMU_MAX_ACCEL_MAG, JC_IMU_MAX_ACCEL_MAG, + JC_IMU_ACCEL_FUZZ, JC_IMU_ACCEL_FLAT); + input_abs_set_res(ctlr->imu_input, ABS_X, JC_IMU_ACCEL_RES_PER_G); + input_abs_set_res(ctlr->imu_input, ABS_Y, JC_IMU_ACCEL_RES_PER_G); + input_abs_set_res(ctlr->imu_input, ABS_Z, JC_IMU_ACCEL_RES_PER_G); + + input_set_abs_params(ctlr->imu_input, ABS_RX, + -JC_IMU_MAX_GYRO_MAG, JC_IMU_MAX_GYRO_MAG, + JC_IMU_GYRO_FUZZ, JC_IMU_GYRO_FLAT); + input_set_abs_params(ctlr->imu_input, ABS_RY, + -JC_IMU_MAX_GYRO_MAG, JC_IMU_MAX_GYRO_MAG, + JC_IMU_GYRO_FUZZ, JC_IMU_GYRO_FLAT); + input_set_abs_params(ctlr->imu_input, ABS_RZ, + -JC_IMU_MAX_GYRO_MAG, JC_IMU_MAX_GYRO_MAG, + JC_IMU_GYRO_FUZZ, JC_IMU_GYRO_FLAT); + + input_abs_set_res(ctlr->imu_input, ABS_RX, JC_IMU_GYRO_RES_PER_DPS); + input_abs_set_res(ctlr->imu_input, ABS_RY, JC_IMU_GYRO_RES_PER_DPS); + input_abs_set_res(ctlr->imu_input, ABS_RZ, JC_IMU_GYRO_RES_PER_DPS); + + __set_bit(EV_MSC, ctlr->imu_input->evbit); + __set_bit(MSC_TIMESTAMP, ctlr->imu_input->mscbit); + __set_bit(INPUT_PROP_ACCELEROMETER, ctlr->imu_input->propbit); + + ret = input_register_device(ctlr->imu_input); + if (ret) + return ret; + return 0; } @@ -1465,7 +1926,7 @@ static int joycon_read_info(struct joycon_ctlr *ctlr) report = (struct joycon_input_report *)ctlr->input_buf; for (i = 4, j = 0; j < 6; i++, j++) - ctlr->mac_addr[j] = report->reply.data[i]; + ctlr->mac_addr[j] = report->subcmd_reply.data[i]; ctlr->mac_addr_str = devm_kasprintf(&ctlr->hdev->dev, GFP_KERNEL, "%02X:%02X:%02X:%02X:%02X:%02X", @@ -1480,7 +1941,7 @@ static int joycon_read_info(struct joycon_ctlr *ctlr) hid_info(ctlr->hdev, "controller MAC = %s\n", ctlr->mac_addr_str); /* Retrieve the type so we can distinguish for charging grip */ - ctlr->ctlr_type = report->reply.data[2]; + ctlr->ctlr_type = report->subcmd_reply.data[2]; return 0; } @@ -1521,7 +1982,7 @@ static int joycon_ctlr_handle_event(struct joycon_ctlr *ctlr, u8 *data, data[0] != JC_INPUT_SUBCMD_REPLY) break; report = (struct joycon_input_report *)data; - if (report->reply.id == ctlr->subcmd_ack_match) + if (report->subcmd_reply.id == ctlr->subcmd_ack_match) match = true; break; default: @@ -1651,6 +2112,16 @@ static int nintendo_hid_probe(struct hid_device *hdev, hid_warn(hdev, "Analog stick positions may be inaccurate\n"); } + /* get IMU calibration data, and parse it */ + ret = joycon_request_imu_calibration(ctlr); + if (ret) { + /* + * We can function with default calibration, but it may be + * inaccurate. Provide a warning, and continue on. + */ + hid_warn(hdev, "Unable to read IMU calibration data\n"); + } + /* Set the reporting mode to 0x30, which is the full report mode */ ret = joycon_set_report_mode(ctlr); if (ret) { @@ -1665,6 +2136,13 @@ static int nintendo_hid_probe(struct hid_device *hdev, goto err_mutex; } + /* Enable the IMU */ + ret = joycon_enable_imu(ctlr); + if (ret) { + hid_err(hdev, "Failed to enable the IMU; ret=%d\n", ret); + goto err_mutex; + } + ret = joycon_read_info(ctlr); if (ret) { hid_err(hdev, "Failed to retrieve controller info; ret=%d\n", @@ -1757,3 +2235,4 @@ module_hid_driver(nintendo_hid_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Daniel J. Ogorchock "); MODULE_DESCRIPTION("Driver for Nintendo Switch Controllers"); + diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c index 947d440..b45ddb4 100644 --- a/drivers/input/joydev.c +++ b/drivers/input/joydev.c @@ -758,6 +758,12 @@ static void joydev_cleanup(struct joydev *joydev) #define USB_VENDOR_ID_THQ 0x20d6 #define USB_DEVICE_ID_THQ_PS3_UDRAW 0xcb17 +#define USB_VENDOR_ID_NINTENDO 0x057e +#define USB_DEVICE_ID_NINTENDO_JOYCONL 0x2006 +#define USB_DEVICE_ID_NINTENDO_JOYCONR 0x2007 +#define USB_DEVICE_ID_NINTENDO_PROCON 0x2009 +#define USB_DEVICE_ID_NINTENDO_CHRGGRIP 0x200E + #define ACCEL_DEV(vnd, prd) \ { \ .flags = INPUT_DEVICE_ID_MATCH_VENDOR | \ @@ -789,6 +795,10 @@ static const struct input_device_id joydev_blacklist[] = { ACCEL_DEV(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER_2), ACCEL_DEV(USB_VENDOR_ID_SONY, USB_DEVICE_ID_SONY_PS4_CONTROLLER_DONGLE), ACCEL_DEV(USB_VENDOR_ID_THQ, USB_DEVICE_ID_THQ_PS3_UDRAW), + ACCEL_DEV(USB_VENDOR_ID_NINTENDO, USB_DEVICE_ID_NINTENDO_PROCON), + ACCEL_DEV(USB_VENDOR_ID_NINTENDO, USB_DEVICE_ID_NINTENDO_CHRGGRIP), + ACCEL_DEV(USB_VENDOR_ID_NINTENDO, USB_DEVICE_ID_NINTENDO_JOYCONL), + ACCEL_DEV(USB_VENDOR_ID_NINTENDO, USB_DEVICE_ID_NINTENDO_JOYCONR), { /* sentinel */ } };