From: Patrice Chotard Date: Wed, 15 Nov 2017 12:14:52 +0000 (+0100) Subject: clk: clk_stm32fx: add clock configuration for mmc usage X-Git-Tag: v2018.01-rc1~47 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=4e97e25723530cc8bf57ca1d0ae17d86895e04c5;p=platform%2Fkernel%2Fu-boot.git clk: clk_stm32fx: add clock configuration for mmc usage MMC block needs 48Mhz source clock, for that we choose to select the SAI PLL. Update also stm32_clock_get_rate() to retrieve the MMC clock source needed in MMC driver. STM32F4 uses a different RCC variant than STM32F7. For STM32F4 sdmmc clocks bit are located into dckcfgr register whereas there are located into dckcfgr2 registers on STM32F7. In both registers, bits CK48MSEL and SDMMC1SEL are located at the same position. Signed-off-by: Christophe Priouzeau Signed-off-by: Patrice Chotard Reviewed-by: Vikas Manocha --- diff --git a/arch/arm/include/asm/arch-stm32f7/stm32.h b/arch/arm/include/asm/arch-stm32f7/stm32.h index 0117039..f5e08ef 100644 --- a/arch/arm/include/asm/arch-stm32f7/stm32.h +++ b/arch/arm/include/asm/arch-stm32f7/stm32.h @@ -92,6 +92,7 @@ struct stm32_rcc_regs { u32 plli2scfgr; /* RCC PLLI2S configuration */ u32 pllsaicfgr; /* PLLSAI configuration */ u32 dckcfgr; /* dedicated clocks configuration register */ + u32 dckcfgr2; /* dedicated clocks configuration register */ }; #define STM32_RCC ((struct stm32_rcc_regs *)RCC_BASE) diff --git a/drivers/clk/clk_stm32f.c b/drivers/clk/clk_stm32f.c index 6e29c55..634f071 100644 --- a/drivers/clk/clk_stm32f.c +++ b/drivers/clk/clk_stm32f.c @@ -24,6 +24,8 @@ #define RCC_CR_CSSON BIT(19) #define RCC_CR_PLLON BIT(24) #define RCC_CR_PLLRDY BIT(25) +#define RCC_CR_PLLSAION BIT(28) +#define RCC_CR_PLLSAIRDY BIT(29) #define RCC_PLLCFGR_PLLM_MASK GENMASK(5, 0) #define RCC_PLLCFGR_PLLN_MASK GENMASK(14, 6) @@ -54,6 +56,20 @@ #define RCC_CFGR_PPRE1_SHIFT 10 #define RCC_CFGR_PPRE2_SHIFT 13 +#define RCC_PLLCFGR_PLLSAIN_MASK GENMASK(14, 6) +#define RCC_PLLCFGR_PLLSAIP_MASK GENMASK(17, 16) +#define RCC_PLLSAICFGR_PLLSAIN_SHIFT 6 +#define RCC_PLLSAICFGR_PLLSAIP_SHIFT 16 +#define RCC_PLLSAICFGR_PLLSAIP_4 BIT(17) +#define RCC_PLLSAICFGR_PLLSAIQ_4 BIT(26) +#define RCC_PLLSAICFGR_PLLSAIR_2 BIT(29) + +#define RCC_DCKCFGRX_CK48MSEL BIT(27) +#define RCC_DCKCFGRX_SDMMC1SEL BIT(28) +#define RCC_DCKCFGR2_SDMMC2SEL BIT(29) + +#define RCC_APB2ENR_SAI1EN BIT(22) + /* * RCC AHB1ENR specific definitions */ @@ -84,6 +100,7 @@ struct stm32_clk_info stm32f4_clk_info = { .apb2_psc = APB_PSC_2, }, .has_overdrive = false, + .v2 = false, }; struct stm32_clk_info stm32f7_clk_info = { @@ -98,6 +115,7 @@ struct stm32_clk_info stm32f7_clk_info = { .apb2_psc = APB_PSC_2, }, .has_overdrive = true, + .v2 = true, }; struct stm32_clk { @@ -112,12 +130,13 @@ static int configure_clocks(struct udevice *dev) struct stm32_rcc_regs *regs = priv->base; struct stm32_pwr_regs *pwr = priv->pwr_regs; struct pll_psc sys_pll_psc = priv->info->sys_pll_psc; + u32 pllsaicfgr = 0; /* Reset RCC configuration */ setbits_le32(®s->cr, RCC_CR_HSION); writel(0, ®s->cfgr); /* Reset CFGR */ clrbits_le32(®s->cr, (RCC_CR_HSEON | RCC_CR_CSSON - | RCC_CR_PLLON)); + | RCC_CR_PLLON | RCC_CR_PLLSAION)); writel(0x24003010, ®s->pllcfgr); /* Reset value from RM */ clrbits_le32(®s->cr, RCC_CR_HSEBYP); writel(0, ®s->cir); /* Disable all interrupts */ @@ -143,11 +162,39 @@ static int configure_clocks(struct udevice *dev) clrsetbits_le32(®s->pllcfgr, RCC_PLLCFGR_PLLQ_MASK, sys_pll_psc.pll_q << RCC_PLLCFGR_PLLQ_SHIFT); + /* Configure the SAI PLL to get a 48 MHz source */ + pllsaicfgr = RCC_PLLSAICFGR_PLLSAIR_2 | RCC_PLLSAICFGR_PLLSAIQ_4 | + RCC_PLLSAICFGR_PLLSAIP_4; + pllsaicfgr |= 192 << RCC_PLLSAICFGR_PLLSAIN_SHIFT; + writel(pllsaicfgr, ®s->pllsaicfgr); + /* Enable the main PLL */ setbits_le32(®s->cr, RCC_CR_PLLON); while (!(readl(®s->cr) & RCC_CR_PLLRDY)) ; + if (priv->info->v2) { /*stm32f7 case */ + /* select PLLSAI as 48MHz clock source */ + setbits_le32(®s->dckcfgr2, RCC_DCKCFGRX_CK48MSEL); + + /* select 48MHz as SDMMC1 clock source */ + clrbits_le32(®s->dckcfgr2, RCC_DCKCFGRX_SDMMC1SEL); + + /* select 48MHz as SDMMC2 clock source */ + clrbits_le32(®s->dckcfgr2, RCC_DCKCFGR2_SDMMC2SEL); + } else { /* stm32f4 case */ + /* select PLLSAI as 48MHz clock source */ + setbits_le32(®s->dckcfgr, RCC_DCKCFGRX_CK48MSEL); + + /* select 48MHz as SDMMC1 clock source */ + clrbits_le32(®s->dckcfgr, RCC_DCKCFGRX_SDMMC1SEL); + } + + /* Enable the SAI PLL */ + setbits_le32(®s->cr, RCC_CR_PLLSAION); + while (!(readl(®s->cr) & RCC_CR_PLLSAIRDY)) + ; + setbits_le32(®s->apb1enr, RCC_APB1ENR_PWREN); if (priv->info->has_overdrive) { @@ -173,10 +220,40 @@ static int configure_clocks(struct udevice *dev) while ((readl(®s->cfgr) & RCC_CFGR_SWS_MASK) != RCC_CFGR_SWS_PLL) ; + /* gate the SAI clock, needed for MMC 1&2 clocks */ + setbits_le32(®s->apb2enr, RCC_APB2ENR_SAI1EN); return 0; } +static unsigned long stm32_clk_pll48clk_rate(struct stm32_clk *priv, + u32 sysclk) +{ + struct stm32_rcc_regs *regs = priv->base; + u16 pllq, pllm, pllsain, pllsaip; + bool pllsai; + + pllq = (readl(®s->pllcfgr) & RCC_PLLCFGR_PLLQ_MASK) + >> RCC_PLLCFGR_PLLQ_SHIFT; + + if (priv->info->v2) /*stm32f7 case */ + pllsai = readl(®s->dckcfgr2) & RCC_DCKCFGRX_CK48MSEL; + else + pllsai = readl(®s->dckcfgr) & RCC_DCKCFGRX_CK48MSEL; + + if (pllsai) { + /* PLL48CLK is selected from PLLSAI, get PLLSAI value */ + pllm = (readl(®s->pllcfgr) & RCC_PLLCFGR_PLLM_MASK); + pllsain = ((readl(®s->pllsaicfgr) & RCC_PLLCFGR_PLLSAIN_MASK) + >> RCC_PLLSAICFGR_PLLSAIN_SHIFT); + pllsaip = ((((readl(®s->pllsaicfgr) & RCC_PLLCFGR_PLLSAIP_MASK) + >> RCC_PLLSAICFGR_PLLSAIP_SHIFT) + 1) << 1); + return ((CONFIG_STM32_HSE_HZ / pllm) * pllsain) / pllsaip; + } + /* PLL48CLK is selected from PLLQ */ + return sysclk / pllq; +} + static unsigned long stm32_clk_get_rate(struct clk *clk) { struct stm32_clk *priv = dev_get_priv(clk->dev); @@ -222,6 +299,28 @@ static unsigned long stm32_clk_get_rate(struct clk *clk) return sysclk >>= shift; /* APB2 CLOCK */ case STM32F7_APB2_CLOCK(TIM1) ... STM32F7_APB2_CLOCK(LTDC): + /* + * particular case for SDMMC1 and SDMMC2 : + * 48Mhz source clock can be from main PLL or from + * SAI PLL + */ + switch (clk->id) { + case STM32F7_APB2_CLOCK(SDMMC1): + if (readl(®s->dckcfgr2) & RCC_DCKCFGRX_SDMMC1SEL) + /* System clock is selected as SDMMC1 clock */ + return sysclk; + else + return stm32_clk_pll48clk_rate(priv, sysclk); + break; + case STM32F7_APB2_CLOCK(SDMMC2): + if (readl(®s->dckcfgr2) & RCC_DCKCFGR2_SDMMC2SEL) + /* System clock is selected as SDMMC2 clock */ + return sysclk; + else + return stm32_clk_pll48clk_rate(priv, sysclk); + break; + } + shift = apb_psc_table[( (readl(®s->cfgr) & RCC_CFGR_APB2_PSC_MASK) >> RCC_CFGR_PPRE2_SHIFT)]; diff --git a/include/dt-bindings/mfd/stm32f7-rcc.h b/include/dt-bindings/mfd/stm32f7-rcc.h index e36cc69..44c0914 100644 --- a/include/dt-bindings/mfd/stm32f7-rcc.h +++ b/include/dt-bindings/mfd/stm32f7-rcc.h @@ -90,6 +90,7 @@ #define STM32F7_RCC_APB2_TIM8 1 #define STM32F7_RCC_APB2_USART1 4 #define STM32F7_RCC_APB2_USART6 5 +#define STM32F7_RCC_APB2_SDMMC2 7 #define STM32F7_RCC_APB2_ADC1 8 #define STM32F7_RCC_APB2_ADC2 9 #define STM32F7_RCC_APB2_ADC3 10 diff --git a/include/stm32_rcc.h b/include/stm32_rcc.h index 6dfb9cc..fb08552 100644 --- a/include/stm32_rcc.h +++ b/include/stm32_rcc.h @@ -37,6 +37,7 @@ struct pll_psc { struct stm32_clk_info { struct pll_psc sys_pll_psc; bool has_overdrive; + bool v2; }; enum soc_family {