From: Don Skidmore Date: Wed, 31 Jul 2013 02:17:40 +0000 (+0000) Subject: ixgbe: add new media type. X-Git-Tag: v3.12-rc1~132^2~416^2~11 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=4e8e1bca6e2584f2b29744f4cfdbb9bbf151d177;p=profile%2Fivi%2Fkernel-x86-ivi.git ixgbe: add new media type. This patch adds support for a new media type fiber_fixed. This is useful to avoid all the SFP+ hot plug support path on devices who's fix fiber need not worry about such things. This patch is needed for a following patch that adds support for "fiber_fixed" devices. v2: cleaned up logging message based on feedback from David Miller Signed-off-by: Don Skidmore Signed-off-by: Jeff Kirsher --- diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c index 0b82d38..9d627fd 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_82599.c @@ -527,6 +527,75 @@ static void ixgbe_flap_tx_laser_multispeed_fiber(struct ixgbe_hw *hw) } /** + * ixgbe_set_fiber_fixed_speed - Set module link speed for fixed fiber + * @hw: pointer to hardware structure + * @speed: link speed to set + * + * We set the module speed differently for fixed fiber. For other + * multi-speed devices we don't have an error value so here if we + * detect an error we just log it and exit. + */ +static void ixgbe_set_fiber_fixed_speed(struct ixgbe_hw *hw, + ixgbe_link_speed speed) +{ + s32 status; + u8 rs, eeprom_data; + + switch (speed) { + case IXGBE_LINK_SPEED_10GB_FULL: + /* one bit mask same as setting on */ + rs = IXGBE_SFF_SOFT_RS_SELECT_10G; + break; + case IXGBE_LINK_SPEED_1GB_FULL: + rs = IXGBE_SFF_SOFT_RS_SELECT_1G; + break; + default: + hw_dbg(hw, "Invalid fixed module speed\n"); + return; + } + + /* Set RS0 */ + status = hw->phy.ops.read_i2c_byte(hw, IXGBE_SFF_SFF_8472_OSCB, + IXGBE_I2C_EEPROM_DEV_ADDR2, + &eeprom_data); + if (status) { + hw_dbg(hw, "Failed to read Rx Rate Select RS0\n"); + goto out; + } + + eeprom_data = (eeprom_data & ~IXGBE_SFF_SOFT_RS_SELECT_MASK) & rs; + + status = hw->phy.ops.write_i2c_byte(hw, IXGBE_SFF_SFF_8472_OSCB, + IXGBE_I2C_EEPROM_DEV_ADDR2, + eeprom_data); + if (status) { + hw_dbg(hw, "Failed to write Rx Rate Select RS0\n"); + goto out; + } + + /* Set RS1 */ + status = hw->phy.ops.read_i2c_byte(hw, IXGBE_SFF_SFF_8472_ESCB, + IXGBE_I2C_EEPROM_DEV_ADDR2, + &eeprom_data); + if (status) { + hw_dbg(hw, "Failed to read Rx Rate Select RS1\n"); + goto out; + } + + eeprom_data = (eeprom_data & ~IXGBE_SFF_SOFT_RS_SELECT_MASK) & rs; + + status = hw->phy.ops.write_i2c_byte(hw, IXGBE_SFF_SFF_8472_ESCB, + IXGBE_I2C_EEPROM_DEV_ADDR2, + eeprom_data); + if (status) { + hw_dbg(hw, "Failed to write Rx Rate Select RS1\n"); + goto out; + } +out: + return; +} + +/** * ixgbe_setup_mac_link_multispeed_fiber - Set MAC link speed * @hw: pointer to hardware structure * @speed: new link speed @@ -573,9 +642,14 @@ static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, goto out; /* Set the module link speed */ - esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5); - IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); - IXGBE_WRITE_FLUSH(hw); + if (hw->phy.media_type == ixgbe_media_type_fiber_fixed) { + ixgbe_set_fiber_fixed_speed(hw, + IXGBE_LINK_SPEED_10GB_FULL); + } else { + esdp_reg |= (IXGBE_ESDP_SDP5_DIR | IXGBE_ESDP_SDP5); + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); + IXGBE_WRITE_FLUSH(hw); + } /* Allow module to change analog characteristics (1G->10G) */ msleep(40); @@ -625,10 +699,15 @@ static s32 ixgbe_setup_mac_link_multispeed_fiber(struct ixgbe_hw *hw, goto out; /* Set the module link speed */ - esdp_reg &= ~IXGBE_ESDP_SDP5; - esdp_reg |= IXGBE_ESDP_SDP5_DIR; - IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); - IXGBE_WRITE_FLUSH(hw); + if (hw->phy.media_type == ixgbe_media_type_fiber_fixed) { + ixgbe_set_fiber_fixed_speed(hw, + IXGBE_LINK_SPEED_1GB_FULL); + } else { + esdp_reg &= ~IXGBE_ESDP_SDP5; + esdp_reg |= IXGBE_ESDP_SDP5_DIR; + IXGBE_WRITE_REG(hw, IXGBE_ESDP, esdp_reg); + IXGBE_WRITE_FLUSH(hw); + } /* Allow module to change analog characteristics (10G->1G) */ msleep(40); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c index ddbc3ee..0d09711 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_common.c @@ -72,6 +72,7 @@ bool ixgbe_device_supports_autoneg_fc(struct ixgbe_hw *hw) bool link_up; switch (hw->phy.media_type) { + case ixgbe_media_type_fiber_fixed: case ixgbe_media_type_fiber: hw->mac.ops.check_link(hw, &speed, &link_up, false); /* if link is down, assume supported */ @@ -138,6 +139,7 @@ static s32 ixgbe_setup_fc(struct ixgbe_hw *hw) * we link at 10G, the 1G advertisement is harmless and vice versa. */ switch (hw->phy.media_type) { + case ixgbe_media_type_fiber_fixed: case ixgbe_media_type_fiber: case ixgbe_media_type_backplane: reg = IXGBE_READ_REG(hw, IXGBE_PCS1GANA); @@ -2404,6 +2406,7 @@ void ixgbe_fc_autoneg(struct ixgbe_hw *hw) switch (hw->phy.media_type) { /* Autoneg flow control on fiber adapters */ + case ixgbe_media_type_fiber_fixed: case ixgbe_media_type_fiber: if (speed == IXGBE_LINK_SPEED_1GB_FULL) ret_val = ixgbe_fc_autoneg_fiber(hw); diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h index 886a343..2d3433f 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_phy.h @@ -44,6 +44,8 @@ #define IXGBE_SFF_CABLE_SPEC_COMP 0x3C #define IXGBE_SFF_SFF_8472_SWAP 0x5C #define IXGBE_SFF_SFF_8472_COMP 0x5E +#define IXGBE_SFF_SFF_8472_OSCB 0x6E +#define IXGBE_SFF_SFF_8472_ESCB 0x76 /* Bitmasks */ #define IXGBE_SFF_DA_PASSIVE_CABLE 0x4 @@ -54,6 +56,9 @@ #define IXGBE_SFF_1GBASET_CAPABLE 0x8 #define IXGBE_SFF_10GBASESR_CAPABLE 0x10 #define IXGBE_SFF_10GBASELR_CAPABLE 0x20 +#define IXGBE_SFF_SOFT_RS_SELECT_MASK 0x8 +#define IXGBE_SFF_SOFT_RS_SELECT_10G 0x8 +#define IXGBE_SFF_SOFT_RS_SELECT_1G 0x0 #define IXGBE_SFF_ADDRESSING_MODE 0x4 #define IXGBE_I2C_EEPROM_READ_MASK 0x100 #define IXGBE_I2C_EEPROM_STATUS_MASK 0x3 diff --git a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h index 70c6aa3..8968ea0 100644 --- a/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h +++ b/drivers/net/ethernet/intel/ixgbe/ixgbe_type.h @@ -2622,6 +2622,7 @@ enum ixgbe_sfp_type { enum ixgbe_media_type { ixgbe_media_type_unknown = 0, ixgbe_media_type_fiber, + ixgbe_media_type_fiber_fixed, ixgbe_media_type_fiber_lco, ixgbe_media_type_copper, ixgbe_media_type_backplane,