From: Sean Young Date: Thu, 8 Jun 2017 09:10:41 +0000 (-0400) Subject: media: lirc: remove LIRCCODE and LIRC_GET_LENGTH X-Git-Tag: v4.19~1636^2~252 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=4e3cd001fde13dfd4a91888f908b2a07fd0a4047;p=platform%2Fkernel%2Flinux-rpi.git media: lirc: remove LIRCCODE and LIRC_GET_LENGTH LIRCCODE is a lirc mode where a driver produces driver-dependent codes for receive and transmit. No driver uses this any more. The LIRC_GET_LENGTH ioctl was used for this mode only. Signed-off-by: Sean Young Signed-off-by: Mauro Carvalho Chehab --- diff --git a/Documentation/media/lirc.h.rst.exceptions b/Documentation/media/lirc.h.rst.exceptions index c130617..63ba1d3 100644 --- a/Documentation/media/lirc.h.rst.exceptions +++ b/Documentation/media/lirc.h.rst.exceptions @@ -28,6 +28,10 @@ ignore define LIRC_CAN_SEND_MASK ignore define LIRC_CAN_REC_MASK ignore define LIRC_CAN_SET_REC_DUTY_CYCLE +# Obsolete ioctls + +ignore ioctl LIRC_GET_LENGTH + # Undocumented macros ignore define PULSE_BIT @@ -40,3 +44,4 @@ ignore define LIRC_VALUE_MASK ignore define LIRC_MODE2_MASK ignore define LIRC_MODE_RAW +ignore define LIRC_MODE_LIRCCODE diff --git a/Documentation/media/uapi/rc/lirc-dev-intro.rst b/Documentation/media/uapi/rc/lirc-dev-intro.rst index d1936ee..3cacf9a 100644 --- a/Documentation/media/uapi/rc/lirc-dev-intro.rst +++ b/Documentation/media/uapi/rc/lirc-dev-intro.rst @@ -72,21 +72,6 @@ on the following table. this packet will be sent, with the number of microseconds with no IR. -.. _lirc-mode-lirccode: - -``LIRC_MODE_LIRCCODE`` - - This mode can be used for IR receive and send. - - The IR signal is decoded internally by the receiver, or encoded by the - transmitter. The LIRC interface represents the scancode as byte string, - which might not be a u32, it can be any length. The value is entirely - driver dependent. This mode is used by some older lirc drivers. - - The length of each code depends on the driver, which can be retrieved - with :ref:`lirc_get_length`. This length is used both - for transmitting and receiving IR. - .. _lirc-mode-pulse: ``LIRC_MODE_PULSE`` diff --git a/Documentation/media/uapi/rc/lirc-func.rst b/Documentation/media/uapi/rc/lirc-func.rst index 9b5a772..ddb4620 100644 --- a/Documentation/media/uapi/rc/lirc-func.rst +++ b/Documentation/media/uapi/rc/lirc-func.rst @@ -18,7 +18,6 @@ LIRC Function Reference lirc-set-send-duty-cycle lirc-get-timeout lirc-set-rec-timeout - lirc-get-length lirc-set-rec-carrier lirc-set-rec-carrier-range lirc-set-send-carrier diff --git a/Documentation/media/uapi/rc/lirc-get-features.rst b/Documentation/media/uapi/rc/lirc-get-features.rst index 64f89a4..50c2c26 100644 --- a/Documentation/media/uapi/rc/lirc-get-features.rst +++ b/Documentation/media/uapi/rc/lirc-get-features.rst @@ -62,8 +62,7 @@ LIRC features ``LIRC_CAN_REC_LIRCCODE`` - The driver is capable of receiving using - :ref:`LIRC_MODE_LIRCCODE `. + Unused. Kept just to avoid breaking uAPI. .. _LIRC-CAN-SET-SEND-CARRIER: @@ -170,9 +169,7 @@ LIRC features ``LIRC_CAN_SEND_LIRCCODE`` - The driver supports sending (also called as IR blasting or IR TX) using - :ref:`LIRC_MODE_LIRCCODE `. - + Unused. Kept just to avoid breaking uAPI. Return Value ============ diff --git a/Documentation/media/uapi/rc/lirc-get-length.rst b/Documentation/media/uapi/rc/lirc-get-length.rst deleted file mode 100644 index 3990af5..0000000 --- a/Documentation/media/uapi/rc/lirc-get-length.rst +++ /dev/null @@ -1,44 +0,0 @@ -.. -*- coding: utf-8; mode: rst -*- - -.. _lirc_get_length: - -********************* -ioctl LIRC_GET_LENGTH -********************* - -Name -==== - -LIRC_GET_LENGTH - Retrieves the code length in bits. - -Synopsis -======== - -.. c:function:: int ioctl( int fd, LIRC_GET_LENGTH, __u32 *length ) - :name: LIRC_GET_LENGTH - -Arguments -========= - -``fd`` - File descriptor returned by open(). - -``length`` - length, in bits - - -Description -=========== - -Retrieves the code length in bits (only for -:ref:`LIRC_MODE_LIRCCODE `). -Reads on the device must be done in blocks matching the bit count. -The bit could should be rounded up so that it matches full bytes. - - -Return Value -============ - -On success 0 is returned, on error -1 and the ``errno`` variable is set -appropriately. The generic error codes are described at the -:ref:`Generic Error Codes ` chapter. diff --git a/Documentation/media/uapi/rc/lirc-get-rec-mode.rst b/Documentation/media/uapi/rc/lirc-get-rec-mode.rst index a4eb6c0..b89de9a 100644 --- a/Documentation/media/uapi/rc/lirc-get-rec-mode.rst +++ b/Documentation/media/uapi/rc/lirc-get-rec-mode.rst @@ -34,9 +34,7 @@ Description =========== Get/set supported receive modes. Only :ref:`LIRC_MODE_MODE2 ` -and :ref:`LIRC_MODE_LIRCCODE ` are supported for IR -receive. Use :ref:`lirc_get_features` to find out which modes the driver -supports. +is supported for IR receive. Return Value ============ diff --git a/Documentation/media/uapi/rc/lirc-get-send-mode.rst b/Documentation/media/uapi/rc/lirc-get-send-mode.rst index a169b23..e686b21 100644 --- a/Documentation/media/uapi/rc/lirc-get-send-mode.rst +++ b/Documentation/media/uapi/rc/lirc-get-send-mode.rst @@ -36,8 +36,7 @@ Description Get/set current transmit mode. -Only :ref:`LIRC_MODE_PULSE ` and -:ref:`LIRC_MODE_LIRCCODE ` is supported by for IR send, +Only :ref:`LIRC_MODE_PULSE ` is supported by for IR send, depending on the driver. Use :ref:`lirc_get_features` to find out which modes the driver supports. diff --git a/drivers/media/rc/ir-lirc-codec.c b/drivers/media/rc/ir-lirc-codec.c index 4fd45216..9954ad4 100644 --- a/drivers/media/rc/ir-lirc-codec.c +++ b/drivers/media/rc/ir-lirc-codec.c @@ -388,7 +388,6 @@ static int ir_lirc_register(struct rc_dev *dev) ldev->features = features; ldev->data = &dev->raw->lirc; ldev->buf = NULL; - ldev->code_length = sizeof(struct ir_raw_event) * 8; ldev->chunk_size = sizeof(int); ldev->buffer_size = LIRCBUF_SIZE; ldev->fops = &lirc_fops; diff --git a/drivers/media/rc/lirc_dev.c b/drivers/media/rc/lirc_dev.c index e16d113..ef7e915 100644 --- a/drivers/media/rc/lirc_dev.c +++ b/drivers/media/rc/lirc_dev.c @@ -137,12 +137,6 @@ int lirc_register_device(struct lirc_dev *d) return -EINVAL; } - if (d->code_length < 1 || d->code_length > (BUFLEN * 8)) { - dev_err(&d->dev, "code length must be less than %d bits\n", - BUFLEN * 8); - return -EBADRQC; - } - if (!d->buf && !(d->fops && d->fops->read && d->fops->poll && d->fops->unlocked_ioctl)) { dev_err(&d->dev, "undefined read, poll, ioctl\n"); @@ -152,9 +146,6 @@ int lirc_register_device(struct lirc_dev *d) /* some safety check 8-) */ d->name[sizeof(d->name) - 1] = '\0'; - if (d->features == 0) - d->features = LIRC_CAN_REC_LIRCCODE; - if (LIRC_CAN_REC(d->features)) { err = lirc_allocate_buffer(d); if (err) @@ -343,9 +334,6 @@ long lirc_dev_fop_ioctl(struct file *file, unsigned int cmd, unsigned long arg) * for now, lirc_serial doesn't support mode changing either */ break; - case LIRC_GET_LENGTH: - result = put_user(d->code_length, (__u32 __user *)arg); - break; default: result = -ENOTTY; } diff --git a/include/media/lirc_dev.h b/include/media/lirc_dev.h index 857da67..0a03dd9 100644 --- a/include/media/lirc_dev.h +++ b/include/media/lirc_dev.h @@ -9,8 +9,6 @@ #ifndef _LINUX_LIRC_DEV_H #define _LINUX_LIRC_DEV_H -#define BUFLEN 16 - #include #include #include @@ -117,7 +115,6 @@ static inline unsigned int lirc_buffer_write(struct lirc_buffer *buf, * * @name: used for logging * @minor: the minor device (/dev/lircX) number for the device - * @code_length: length of a remote control key code expressed in bits * @features: lirc compatible hardware features, like LIRC_MODE_RAW, * LIRC_CAN\_\*, as defined at include/media/lirc.h. * @buffer_size: Number of FIFO buffers with @chunk_size size. @@ -142,7 +139,6 @@ static inline unsigned int lirc_buffer_write(struct lirc_buffer *buf, struct lirc_dev { char name[40]; unsigned int minor; - __u32 code_length; __u32 features; unsigned int buffer_size; /* in chunks holding one code each */