From: Andrew F. Davis Date: Fri, 6 Jan 2017 22:32:12 +0000 (-0600) Subject: am335x: configs: Use ISW_ENTRY_ADDR to set SPL_TEXT_BASE X-Git-Tag: v2017.01~4 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=4d82c4b53e3c911f21383a547477d6f5916c17a7;p=platform%2Fkernel%2Fu-boot.git am335x: configs: Use ISW_ENTRY_ADDR to set SPL_TEXT_BASE The SPL load address changes based on boot type in HS devices, ISW_ENTRY_ADDR is used to set this address for AM43xx based SoCs for similar reasons. Add this same logic for AM33xx devices. Also make the default value for ISW_ENTRY_ADDR correct for GP devices based on SoC, HS devices already pick the correct value in their defconfig. Signed-off-by: Andrew F. Davis --- diff --git a/arch/arm/mach-omap2/am33xx/Kconfig b/arch/arm/mach-omap2/am33xx/Kconfig index 8fd32c2..56c4406 100644 --- a/arch/arm/mach-omap2/am33xx/Kconfig +++ b/arch/arm/mach-omap2/am33xx/Kconfig @@ -119,7 +119,8 @@ config ISW_ENTRY_ADDR point address depending on the device type (secure/non-secure), boot media (xip/non-xip) and image headers. - default 0x402F4000 + default 0x402F4000 if AM43XX + default 0x402F0400 if AM33XX config PUB_ROM_DATA_SIZE hex "Size in bytes of the L3 SRAM reserved by ROM to store data" diff --git a/include/configs/ti_am335x_common.h b/include/configs/ti_am335x_common.h index d841b3f..809d015 100644 --- a/include/configs/ti_am335x_common.h +++ b/include/configs/ti_am335x_common.h @@ -56,7 +56,7 @@ * supports X-MODEM loading via UART, and we leverage this and then use * Y-MODEM to load u-boot.img, when booted over UART. */ -#define CONFIG_SPL_TEXT_BASE 0x402F0400 +#define CONFIG_SPL_TEXT_BASE CONFIG_ISW_ENTRY_ADDR #define CONFIG_SYS_SPL_ARGS_ADDR (CONFIG_SYS_SDRAM_BASE + \ (128 << 20))