From: Dan Murphy Date: Wed, 13 Nov 2019 16:42:25 +0000 (-0600) Subject: dt-bindings: net: dp83869: Add TI dp83869 phy X-Git-Tag: v5.15~5092^2~103 X-Git-Url: http://review.tizen.org/git/?a=commitdiff_plain;h=4d66c56f7efe122d09d06cd3ebfa52a43d51a9cb;p=platform%2Fkernel%2Flinux-starfive.git dt-bindings: net: dp83869: Add TI dp83869 phy Add dt bindings for the TI dp83869 Gigabit ethernet phy device. Signed-off-by: Dan Murphy CC: Rob Herring Signed-off-by: David S. Miller --- diff --git a/Documentation/devicetree/bindings/net/ti,dp83869.yaml b/Documentation/devicetree/bindings/net/ti,dp83869.yaml new file mode 100644 index 0000000..6fe3e45 --- /dev/null +++ b/Documentation/devicetree/bindings/net/ti,dp83869.yaml @@ -0,0 +1,84 @@ +# SPDX-License-Identifier: GPL-2.0 +# Copyright (C) 2019 Texas Instruments Incorporated +%YAML 1.2 +--- +$id: "http://devicetree.org/schemas/net/ti,dp83869.yaml#" +$schema: "http://devicetree.org/meta-schemas/core.yaml#" + +title: TI DP83869 ethernet PHY + +allOf: + - $ref: "ethernet-controller.yaml#" + +maintainers: + - Dan Murphy + +description: | + The DP83869HM device is a robust, fully-featured Gigabit (PHY) transceiver + with integrated PMD sublayers that supports 10BASE-Te, 100BASE-TX and + 1000BASE-T Ethernet protocols. The DP83869 also supports 1000BASE-X and + 100BASE-FX Fiber protocols. + This device interfaces to the MAC layer through Reduced GMII (RGMII) and + SGMII The DP83869HM supports Media Conversion in Managed mode. In this mode, + the DP83869HM can run 1000BASE-X-to-1000BASE-T and 100BASE-FX-to-100BASE-TX + conversions. The DP83869HM can also support Bridge Conversion from RGMII to + SGMII and SGMII to RGMII. + + Specifications about the charger can be found at: + http://www.ti.com/lit/ds/symlink/dp83869hm.pdf + +properties: + reg: + maxItems: 1 + + ti,min-output-impedance: + type: boolean + description: | + MAC Interface Impedance control to set the programmable output impedance + to a minimum value (35 ohms). + + ti,max-output-impedance: + type: boolean + description: | + MAC Interface Impedance control to set the programmable output impedance + to a maximum value (70 ohms). + + tx-fifo-depth: + $ref: /schemas/types.yaml#definitions/uint32 + description: | + Transmitt FIFO depth see dt-bindings/net/ti-dp83869.h for values + + rx-fifo-depth: + $ref: /schemas/types.yaml#definitions/uint32 + description: | + Receive FIFO depth see dt-bindings/net/ti-dp83869.h for values + + ti,clk-output-sel: + $ref: /schemas/types.yaml#definitions/uint32 + description: | + Muxing option for CLK_OUT pin see dt-bindings/net/ti-dp83869.h for values. + + ti,op-mode: + $ref: /schemas/types.yaml#definitions/uint32 + description: | + Operational mode for the PHY. If this is not set then the operational + mode is set by the straps. see dt-bindings/net/ti-dp83869.h for values + +required: + - reg + +examples: + - | + #include + mdio0 { + #address-cells = <1>; + #size-cells = <0>; + ethphy0: ethernet-phy@0 { + reg = <0>; + tx-fifo-depth = ; + rx-fifo-depth = ; + ti,op-mode = ; + ti,max-output-impedance = "true"; + ti,clk-output-sel = ; + }; + }; diff --git a/include/dt-bindings/net/ti-dp83869.h b/include/dt-bindings/net/ti-dp83869.h new file mode 100644 index 0000000..218b1a6 --- /dev/null +++ b/include/dt-bindings/net/ti-dp83869.h @@ -0,0 +1,42 @@ +/* SPDX-License-Identifier: GPL-2.0-only */ +/* + * Device Tree constants for the Texas Instruments DP83869 PHY + * + * Author: Dan Murphy + * + * Copyright: (C) 2019 Texas Instruments, Inc. + */ + +#ifndef _DT_BINDINGS_TI_DP83869_H +#define _DT_BINDINGS_TI_DP83869_H + +/* PHY CTRL bits */ +#define DP83869_PHYCR_FIFO_DEPTH_3_B_NIB 0x00 +#define DP83869_PHYCR_FIFO_DEPTH_4_B_NIB 0x01 +#define DP83869_PHYCR_FIFO_DEPTH_6_B_NIB 0x02 +#define DP83869_PHYCR_FIFO_DEPTH_8_B_NIB 0x03 + +/* IO_MUX_CFG - Clock output selection */ +#define DP83869_CLK_O_SEL_CHN_A_RCLK 0x0 +#define DP83869_CLK_O_SEL_CHN_B_RCLK 0x1 +#define DP83869_CLK_O_SEL_CHN_C_RCLK 0x2 +#define DP83869_CLK_O_SEL_CHN_D_RCLK 0x3 +#define DP83869_CLK_O_SEL_CHN_A_RCLK_DIV5 0x4 +#define DP83869_CLK_O_SEL_CHN_B_RCLK_DIV5 0x5 +#define DP83869_CLK_O_SEL_CHN_C_RCLK_DIV5 0x6 +#define DP83869_CLK_O_SEL_CHN_D_RCLK_DIV5 0x7 +#define DP83869_CLK_O_SEL_CHN_A_TCLK 0x8 +#define DP83869_CLK_O_SEL_CHN_B_TCLK 0x9 +#define DP83869_CLK_O_SEL_CHN_C_TCLK 0xa +#define DP83869_CLK_O_SEL_CHN_D_TCLK 0xb +#define DP83869_CLK_O_SEL_REF_CLK 0xc + +#define DP83869_RGMII_COPPER_ETHERNET 0x00 +#define DP83869_RGMII_1000_BASE 0x01 +#define DP83869_RGMII_100_BASE 0x02 +#define DP83869_RGMII_SGMII_BRIDGE 0x03 +#define DP83869_1000M_MEDIA_CONVERT 0x04 +#define DP83869_100M_MEDIA_CONVERT 0x05 +#define DP83869_SGMII_COPPER_ETHERNET 0x06 + +#endif